MacBook Pro Harddrive help!!!

Before putting my itunes library (from my old computer) on my MacBook, My memory was at 230gb.
My whole library is only 60gb, and now my MBP's harddrive space is starting to drop below 20gb!?
Why is this?
PLEASE HELP
THANKS IN ADVANCE

Try running Disk Inventory X to see what is taking up the space:
http://www.derlien.com/
Post back with what you find.
Good luck!

Similar Messages

  • My external hard disk not working properly in my macbook pro . anyone help me . its seagate  hard disk

    My external hard disk not working properly in my macbook pro . anyone help me . its seagate  hard disk

    You need to get some software that allows your Mac to read and write to the NTFS disk.  There's a whole bunch of stuff out there, but this program has a good review, and you can try it for free.  I would move everything off of your external drive, reformat it into Mac OSX extended, and use it for your Mac.  You don't need NTFS anymore, unless you still have a Windows computer that needs it.

  • Macbook Pro Harddrive Upgrade Western Digital Scorpio Blue WD10TPVT

    I recently purchased a Western Digital Scorpio Blue 1TB hard drive (WD10TPVT) in order to replace the 500GB hard drive in my Unibody Macbook Pro 15" running Mac OS X 10.6.4.
    After swapping the hard drives I wanted to install Snow Leopard from the scratch on the empty hard drive. I partitioned the hard drive and started the install, but after about 30 min the computer seems to freeze. I tried several times, and each time the behavior is similar. After swapping the hard drives again (back to the old hard drive) I connected the WD10TPVT via an external USB enclosure, and now it works fine - over an extended period of time. So I'm fairly sure the drive itself is working properly.
    I did some research, and it seems that people had similar issues with this drive (e.g. a thread in this forum titled "WD 1TB WD10TPVT in Late 2009 15" Unibody Macbook Pro - NEED HELP!" from April 15). It seems to me that this issue is old but still unresolved, and I wonder if there are any new developments concerning this problem. Is there a "generic" solution?
    Another question: the WD10TPVT has 4 additional pins next to the ribbon cable connector. I didn't find any documentation on this, but I assume that these are jumper pins. I found some information that certain jumper configurations will/will not work in the Macbook Pro, but no details on this. What jumper settings do I need to get the WD10TPVT running in my Macbook Pro?
    Thanks a lot!

    There are known issues with replacement HD's on 2009 MBP (and, posibly other models too).
    According to Apple support, it is due to acceleration sensor, which in MBP requires HD to have custom firmware.
    There was even a fix to solve this issue (which I cannot find now, and it actually didn't solve much).
    So far, the best "fix" seems to be to install HD with Apple firmware (works 100%). There are reports that certain drives without acceleration sensor are working properly too, a bit expensive to try, though.
    Still a mystery why Apple does not clearly warn about this issue.

  • Is there an adapter to hook up a firewire from a cannon gl2 to a MacBook Pro?  The firewire end is too big to fit in the MacBook Pro laptop help.

    Is there an adapter to hook up a firewire from a cannon gl2 to a MacBook Pro?  The firewire end is too big to fit in the MacBook Pro laptop help.

    After identifying the exact connectors you need, check the Apple Store online and/or eBay...you should be able to buy a cable with the correct connector on each end, rather than fooling with an adapter.

  • I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help needed.

    I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help is needed to access those documents using the resident software on my MacBook Pro rather than the Beta software on iCloud.com.

    I have iCloud Drive set on the Finder sidebar and use that to open the Numbers Spreadsheet on iCloud.
    OSX 10.10.3
    Best.

  • Hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

    hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

    hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

  • HT1338 i lost my dvd and i want to install mac os on my macbook pro please help

    i lost my dvd and one of my friends install a strange os can't update or install some apps please i want to install my mac os on my macbook pro please help ?

    Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available.
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html

  • Upgraded to 10.8.3 and now having start up problems on MacBook Pro.  Help?

    Upgraded to 10.8.3 and now having start up problems on MacBook Pro.  Help?

    Please elaborate. What do you mean by "start up problems" ? How far does it get?
    Chime? Fans? gray screen? Dark Apple? spinner? spinner spins for usual amount of time and screen goes dark? question mark? tones? flashing power light? smoke? what?

  • I do not know why i can't open facetime,messages,reminders and appstore on my macbook pro, please help me out

    i do not know why i can't open facetime,messages,reminders and appstore on my macbook pro, please help me out

    I used cleanmymac for clean up files, always worked fine before maverick, now i used it yesterday and i can not open any kind of programs except google chrome , my last time machine back up was yesterday but according to him he can restore just complete back up and the last one is in october 2013, i am desperate .
    i already tried to fix permits and press weird combos of buttons on restarting. not working.
    please help

  • I cant connect my new wimax usb stick bm328 on my macbook pro. please help me

    i cant connect my new wimax usb stick bm328 on my macbook pro. please help me

    The Hardware Test detected a RAM problem.  Take out the chips and make certain that the connections are clean and reinstall them.  Make certain that they are well seated. 
    If the problem occurs again, test with one chip at a time.  Also swap bays if necessary.
    Please indicate if you have installed new RAM and if so what brand and the specifications.
    Ciao.
    Message was edited by: OGELTHORPE

  • The iPhone "Nanou" cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional 3.30 GB required). I have been receiving this msg every time i wanna back up my iPhone 5 to my macbook pro. plz help

    The iPhone “Nanou” cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional 3.30 GB required). I have been receiving this msg every time i wanna back up my iPhone 5 to my macbook pro. plz help

    I'd like an answer to this one too. I need to backup my iphone5 and am getting the same message. My old laptop is pretty full. Isn't there a way to choose an external hard drive to back up to? If there is, I don't see it.

  • I am running Lion on both my Macbook Pro and iMac.  Outlook 2011 bombs out and does not even open on my iMac but works perfectly on my Macbook Pro.  Help please.

    I am running Lion on both my Macbook Pro and iMac.  Outlook 2011 bombs out and does not even open on my iMac but works perfectly on my Macbook Pro.  Help please.

    Check for updates by running MS Office Update directly from:
    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
    (Open Finder, ⇧⌘G, paste in the above and click)

  • I can't remember my password to log into my macbook pro. Help?

    I can't remember my password to log into my macbook pro. Help?

    First, make sure caps lock is not on.
    You must back up all data before continuing, unless you've already done so. If you need to back up but can't log in, ask for instructions.
    If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
    Otherwise*, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window opens.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select
     ▹ Restart
    from the menu bar.
    You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
    *Note: If you've activated FileVault, this procedure doesn't apply. Follow instead the instructions on this page:
    If you forget the password and FileVault is on

  • My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

    My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

    Hey there mbarikiwa,
    If your iMac still has not recognized the usb modem, I would use the troubleshooting for Yosemite USB issues in the following article:
    OS X Yosemite: If a USB device isn’t working
    If the device is connected to a USB hub: 
    Make sure the device and the hub are the same speed. Connect USB 3.0 SuperSpeed devices to a USB 3.0 SuperSpeed HUB, USB 2.0 Hi-Speed devices to a USB 2.0 Hi-Speed hub, and so on. 
    If the device doesn’t have a power cord and is plugged into another USB device that doesn’t have a power cord: 
    Try plugging the device directly into your computer’s USB port  or into a USB device that does have a power cord. You might need to disconnect and reconnect the other device as well, if it has stopped responding. 
    If you have many devices connected to your Mac: 
    Disconnect all USB devices except the device you’re testing, an Apple keyboard, and an Apple mouse. Make sure that the device is connected directly to the computer, and that any hubs or extension cables are disconnected. If you can use the device now, the problem may be with one of the other USB devices or hubs you had connected to your computer. Try reconnecting them, one by one, to your computer. When you find the device causing the problem, review its documentation for further troubleshooting steps. 
    Verify that the device appears in System Information: 
    Choose Apple menu > About This Mac. In the window that appears, click Overview, then click the System Report button to open System Information. 
    In the window that appears, see if the USB device is listed below Hardware in the Contents list. If the device appears but does not work, review the device’s documentation for further troubleshooting steps. 
    Restart apps: 
    Quit and restart any apps that use the device. 
    Restart your Mac: 
    Choose Apple menu > Restart.
    Check your device’s USB connection
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • After backing up the 2008 macbook pros harddrive the iphoto pictures are all gone!

    A third party company made a backup of my 2008 Macbook pro by taKing the hard drive out of my 2008 macbook pro the videocard broke and i had nochange to do the backup by my own :( so i needed to go somewhere specialized and i paid 125$ for getting the conete harddrive backed up including all my photos music documents. After all the repairs from apples side were done i felt that the harddrive sounded kind of bad so i went back to the apple store and they told me they have to replace the hardrive and if i have an backup which i thought i had, so that was 2 days ago. As i got my macbook pro back from Apple i brought it to thd place who made my backup. All was saved on their extrernal hardrive but all my photos (iphoto) are gone :( they cannot find them anymore on the drive Nd they couldn't do anything for me :( now my macbook is fixed but all my memmories i kept as pictures are gone and i spent 125$ for a backing up my pictures and now they are all gone :( is there anybody out there who may can halp me tell me what to try ? Maybe my old harddrive where did apple sent it to? May i can get it back or could it be on the. Backup drive but under the library or iphoto folders are just some pictures :( like 500 . But there is one corrupt file which i also cannot open :(
    I need help :( thank you

    1. Reinstalling iPhoto has no effect on your photos. The iPhoto application is totally seperate from your iPhoto library
    2. Is you backed up correctly and restored correctly nothing would change
    3. Given your report it is clear that you dopi somethinfpg incorrectly. However since you do not tell how you backed up or how you restored it is impossible to guess what you did wrong or if itpt is possible to fix
    4. Exactly step by step howvdid you back up your iPhoto library and exactly how did you restore it?
    5. Do you have a TimeMachine backup or clone of your iPhoto library from before you did this?
    6. What version of iPhoto '11?  There are many different versions
    LN

Maybe you are looking for

  • FI/accounting document tab not working in migo or mb03

    Dear Experts, In our test server the accounting entries are not showing when we are trying to check those through MIGO(display) or mb03 by clicking FI document tab. Although all are valuated entries, what could be the reason, message is coming "No su

  • Can I enter the 'wait' character in a phone number in Contacts?

    I am accustomed to being able to enter a 'pause' character and a 'wait' character when entering phone numbers in my phone's address book. 'pause' causes the phone to pause a certain number of seconds (typically 2 or 4) before sending the characters w

  • Employee determination on the basis of Org.Unit

    Hi expert, I'd like to retrieve the employee responsible for a task from the organizational unit: In the business scenario i've a person that, for each org unit, is in charge to fulfill this task; the expected behaviour would be that while creating a

  • Performance of XSLT

    We have an HTML page which user will use to get information. At the click of submit information is queried from 2 systems which is in XML format. This information is then merged into one before sending it back to the client. Couple of questions: 1. M

  • Fail over not reliable

              When my database fails over, my weblogic 5.1 (sp10) cluster doesn't always reconnect           when the DB comes back up. It just works for a minute or so, then freezes....           no errors... I have tested the DB and it is fine, if I re