Macbook Pro: How do I set up a RAID system?
Macbook Pro: How do I set up a RAID system on a MACBOOK PRO properly?
Can I have the OS on the same drives or does it need to be seperate?
I mostly want to do this becuase I am having a lot of problems with the "spinning ball of death" and slow speeds. I have my RAM maxed out at 6Gigs and my 7200rpm 750GB HD is about half full.
Am I correct in trying to do an external RAID Drive to help with speed?
If yes, what is the best way to do this and which type of connection (USB, Firewire, etc) is best to use?
Thanks!
Edward House
Edward House
Am I correct in trying to do an external RAID Drive to help with speed?
No
Why is my computer slow?
Similar Messages
-
I have an iPod, iPhone and iPad all set up to a Dell laptop. I recently got a Macbook Pro, how do I transfer all my control for my devices from the Dell to the MacBook? Can anyone help?
http://www.apple.com/support/switch101/
http://www.macworld.com/article/1153952/superguide_switchingtoamac.html -
Hi!I was restoring my MacBook pro to its factory setting by erasing the disk and reinstalling OS X lion via internet.but it is failing telling me that my network is very slow while I used the best network in my area.How should I get an OS X lion to my CP? Is it possible to get it from another MacBook pro?Or is it possible to recover the erased OS X Lion without or with external disc?
Thank youHi OGELTHORPE!
Thank you for your advice but I don't know where i can get it and where to get it. Also I don't know also how to use it.
Could you please keep on helping me?
Regards! -
Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back. I just wanted to have them both, please help. thank you in advance
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
I want to use my old iMac G3 as second monitor to my MacBook Pro, how?
I want to use my old iMac G3 as second monitor to my MacBook Pro, how?
Thanks!You can't really do it in any normal way; that is, using the MacBook's video output port.
You can use this program
http://www.screenrecycler.com/home.html
to make your iMac screen act as a second display, over a network connection. ScreenRecycler runs on your MacBook and creates a virtual second display. It uses the open-source VNC (screen sharing) protocol to serve that second display over the local network. You then run a VNC client program (usually free) on the iMac G3 and display the MacBooks virtual second screen in a window, which you can display full screen. Your iMac then appears to be the MacBook's second screen. You use System Preferences Displays pane to set it up, as you would a real second display.
How well this works depends on your iMac's speed, what Mac OS version it runs, and the speed of the network connection. If you connect the two directly with an Ethernet cable (Cat-5 or better), the network speed should be decently fast (at 100Base-T). If your iMac G3 has Tiger (10.4), you can use this program as the VNC client
http://www.jinx.de/JollysFastVNC.html
(there are free VNC clients for 10.3 and earlier)
However, this solution will never be as fast (in terms of screen refresh rate) as a real display using a real video connection. But you can try it at no cost, to see if it meets your needs. -
I bought a new Macbook Pro, how can I get my very old macbook cleared of my stuff so I can give it to my grandson. I just want him to be able to use it.
Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window.
Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. You should see your hard drive in the left hand column along with your other drives. Click on the drive and select the Erase tab. Set the format value to Mac OS Extended (Journaled) and click the Erase button. After that has finished select the Partition tab. Type in a Name for your hard drive and select how many partitions you want from the Volume Scheme. The usual setting is one partition. Click on the Options button after you've selected a partition to make sure it's set for GUID. Then click the Apply button and after the Partitioning is done quit Disk Utility.
You can now follow the instructions on the install screen -
If I don't have icloud, only mobileme on my macbook pro, how do i get icloud on my computer?
If I don't have icloud, only mobileme on my macbook pro, how do i get icloud on my computer?
By upgrading to OS X Lion 10.7.2 or higher (required for iCloud). First check to see if your system meets the system requirements to upgrade.
Lion system requirements are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Mountain Lion requirements are shown here: http://support.apple.com/kb/HT5444.
If you can run Mountain Lion, you can purchase an upgrade from the Mac App Store. If you can only run Lion, contact the online store in your country and purchase a download code to download it from the Mac App Store.
After upgrading, you will find iCloud in System Preferences>iCloud on your Mac, and can set it up as explained here: http://www.apple.com/icloud/setup/mac.html.
Before upgrading, you may want to check the compatibility of your existing programs by checking here: http://roaringapps.com/apps:table. -
MacBook Pro: How to turn on keyboard tactile sound
For my MacBook Pro: How to turn on the keyboard tactile sound !
I've been on Macs since about 1988 and never saw that option offered from the base system.
I Googled "mac keyboard click sound" and got a lot of hits for third-party software solutions. Give that a try. -
How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro because it's not working =(
The cheap & easy way is to just drag the app to the Trash.
If you want to get all of the associated files use an app deleting app like the free AppCleaner;
http://www.freemacsoft.net/appcleaner/
Just drag an app and drop it on the AppCleaner icon in the Dock and it will find and present to you all the files it thinks are associated with the app. You can uncheck any that you want to keep and then let AppCleaner Trash the rest. -
HELP
how do i import and sync my icloud / iphone contacts into address book on my macbook pro, how do i import and sync my icloud / iphone contacts into address book on my macbook pro
Runnig 10.6.8 on a MacBook PRO.....The easiest fix if you're running Snow Leopard is to export all your contacts, then import them into something like google (I already had a gmail account), and then just use google to sync your contacts instead of icloud (via the sync with Google button in the address book settings).
Its a bit sluggish to update, but it works well. You can then point your iphone, and other iOS devices to use google for contacts too.
If Apple don't want to look after their customers, other companies will gladly do so.... -
i have an iphone and i took notes on it today and i want it to appear on my macbook pro. how do i do this. i think the phone is under a yahoo account and my computer is under something else. how do i log out of the yahoo acct and into the other.
Create a new user account on the computer that he can log in to.
-
My old laptop broke (idk what kind) and my iTunes was on there and now i got a new macbook pro. how do i get my itunes music and videos and etc. on this computer without removing them on my phone? please help!
If the old laptop was a mac also, then use your Time Machine backup to restore you user settings and files.
-
I'm going to install SSD in my Macbook pro, how do I install for example OSX Lion? I dont have any CD with OSX Lion as far as I know.
Ideally, you should clone your HD as Bimmer 7 Series explains.
However, if your computer originally shipped with Lion or Mountain Lion, a clone is not necessary to merely reinstall OS X. OS X Internet Recovery will create a recovery partition, download the installer package, and install it on a completely empty SSD or HD.
Even if your computer shipped with Snow Leopard, it may be eligible to download a firmware update that creates the same ability: http://support.apple.com/kb/HT4904 -
for my macbook pro how do I get icloud, i have mobileme in 'system preferences', which is an expired trial? The Macbook Pro is early 2008?
richsitter wrote:
Are these osx's available for my machine? Can I buy them.
Yes.
richsitter wrote:
I don't know why I don't have one of them since I get any updates available?
Software updates don't upgrade your current operating system to a new one, you have to purchase a newer operting system if you want one.
If you want iCloud, first you have to upgrade to Snow Leopard 10.6.6 (10.6.8 preferred), then you can download Lion from the app store.
Snow Leopard requirements: $29 USD from Apple : http://store.apple.com/us/product/MC573Z/A
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Lion general requirements: $29 USD app store.
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space -
I have a MacBook Pro, how to change the computer name in the "Find Iphone"
I have a MacBook Pro, how to change the computer name in the "Find Iphone"?
Thank you for help! I was inattentive reading your answer. The thing which confused me was that I noted in blue. I had to just write in a red box and close the configuration window.
Maybe you are looking for
-
I'm already do the installation of Lookout 4.0.1
for a telemetrie job with modbus RTU driver.My customer ask me if it's possible to get Data from is existent Endress+Hauser Monorack, with a module ZA672, this module have a RS-232 port, but At this moment I don't event know the protocol they used.An
-
"An error has occurred while installing Adobe AIR. Installation may not be allowed by your administrator" I have tried disabling all antivirus and turning off firewall. I have tried downloading Fix IT. I have tried "Run as Administrator" Nothing has
-
<script type="text/javascript"> function functiontest(process,empname) alert(process); alert(empname); document.empdetform.processName.value=process; document.empdetform.empname.value=empname; document.empdetform.submit(); </script> <c:forEach var="e
-
hi, we have just sent newspapers for printing and they called back that there's a problem with colors - so, the newspaper is in two colors: black/white and blue - we set the blue as a pantone CMYK 2718 PC and now they told me they can't use this CMYK
-
Aperture 3.2 won't update library, won't load
Upgraded from Aperture ver. 2.1.8. When I try to open the upgraded version, I get the message regarding the need to upgrade the library. Whether I check the box in the dialog or not, I get the message "The library in "/Users/sharedlAperture Library.