MacBook Pro, how to set up duel monitors?

I have a MacBook Pro from 2011 and I need to connect it to two monitors, how do I do that?

Hi,
still the best solution although pricey http://www.matrox.com/graphics/en/products/gxm/dh2go/
There are some USB-connected graphics expansions avaiable for Mac, but IMHO these are still not up to the task speedwise.
Regards
Stefan

Similar Messages

MacBook Pro: How do I use external monitor only?

This is odd. It worked and then stopped working. I have a MBP with a Thunderbolt display plugged in. I want to close the clamshell and use only the Thunderbolt display. This worked fine.... until it didn't work. When I close the clamshell, the computer goes to sleep. Does anyone know the magic incantation to make this work?

Never mind. the answer is that the power cord wasn't making proper contact.

I want to use my old iMac G3 as second monitor to my MacBook Pro, how?

I want to use my old iMac G3 as second monitor to my MacBook Pro, how?
Thanks!

You can't really do it in any normal way; that is, using the MacBook's video output port.
You can use this program
http://www.screenrecycler.com/home.html
to make your iMac screen act as a second display, over a network connection. ScreenRecycler runs on your MacBook and creates a virtual second display. It uses the open-source VNC (screen sharing) protocol to serve that second display over the local network. You then run a VNC client program (usually free) on the iMac G3 and display the MacBooks virtual second screen in a window, which you can display full screen. Your iMac then appears to be the MacBook's second screen. You use System Preferences Displays pane to set it up, as you would a real second display.
How well this works depends on your iMac's speed, what Mac OS version it runs, and the speed of the network connection. If you connect the two directly with an Ethernet cable (Cat-5 or better), the network speed should be decently fast (at 100Base-T). If your iMac G3 has Tiger (10.4), you can use this program as the VNC client
http://www.jinx.de/JollysFastVNC.html
(there are free VNC clients for 10.3 and earlier)
However, this solution will never be as fast (in terms of screen refresh rate) as a real display using a real video connection. But you can try it at no cost, to see if it meets your needs.

How to reset my macbook pro to factory setting?

How to reset my macbook pro to factory setting?

Click here and follow the instructions. If the computer originally shipped with Mac OS X 10.6.8 or earlier, when you reach step 5, insert its original disk, restart with the C key held down, use the Disk Utility to erase the internal drive, and install a fresh OS.
(116291)

HT1338 how to reset my macbook pro to factory setting?

how to reset macbook pro to factory setting?

To restore your computer to factory settings:
1. Hold Command and R keys while your Mac is starting to start into OS X Recovery, and open Disk Utility.
2. Select "Macintosh HD" in the sidebar, go to Erase tab and erase the disk.
3. Close Disk Utility and reinstall OS X.
After reinstalling OS X, you will have to reinstall your iLife applications. If your Mac came with DVDs, just insert the Applications disc and install them. If your Mac didn't come with DVDs, open App Store > Purchases, and download the iLife applications

How can I restore my new Macbook pro to Factory setting?

How can I restore my new Macbook pro to Factory setting?

Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: Be sure you have an active internet connection.

Macbook Pro: How do I set up a RAID system?

Macbook Pro: How do I set up a RAID system on a MACBOOK PRO properly?
Can I have the OS on the same drives or does it need to be seperate?
I mostly want to do this becuase I am having a lot of problems with the "spinning ball of death" and slow speeds. I have my RAM maxed out at 6Gigs and my 7200rpm 750GB HD is about half full.
Am I correct in trying to do an external RAID Drive to help with speed?
If yes, what is the best way to do this and which type of connection (USB, Firewire, etc) is best to use?
Thanks!

Edward House
Edward House
Am I correct in trying to do an external RAID Drive to help with speed?
No
Why is my computer slow?

I have an iPod, iPhone and iPad all set up to a Dell laptop. I recently got a Macbook Pro, how do I transfer all my control for my devices from the Dell to the MacBook?

I have an iPod, iPhone and iPad all set up to a Dell laptop. I recently got a Macbook Pro, how do I transfer all my control for my devices from the Dell to the MacBook? Can anyone help?

http://www.apple.com/support/switch101/
http://www.macworld.com/article/1153952/superguide_switchingtoamac.html

Just got new macbook pro, how do you hook up 2nd monitor?

Just got new MacBook Pro, How do you adapt to 2nd monitor?

You will need a Mini DisplayPort (Thunderbolt) cable and an adaptor for the type of connection your monitor requires. You will find the adaptors at Apple's online website.

HT2397 How can I check what region my Macbook pro has been set at.

How can I check what region my Macbook pro has been set at?

It will have been set for the region in which it was purchased.
http://support.apple.com/kb/HT2397
Once you have set the region in DVD Player five times it cannot be changed. However see tis also:
http://support.apple.com/kb/TA25416?viewlocale=en_US&locale=en_US
Instead, use VLC to view videos from different regions:
http://www.videolan.org/vlc/download-macosx.html

Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back

Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back. I just wanted to have them both, please help. thank you in advance

Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Late Macbook Pro 13 with Asus PB287Q (4K Monitor)

Hi,
I just bought the 4K Asus Monitor PB287Q and I can't get it to work via Display-Port at all!!!
Is there anything I'm missing? I've bought a cheap mini-DisplayPort to Display Port cable and hook that up to the
Thunderbolt ports (I've already tried both ports, as well as switching the monitor to DisplayPort 1,2 mode) *nothing*
The monitor works fine and gets detected immediately through HDMI.
I only want to use it with a resolution of 1920x1080 @ 60HZ but can only get 30HZ through HDMI?
The Macbook Pro just doesn't find the monitor through DisplayPort?
Any suggestions?
My OS-X is 10.9.5
thanks a lot!
ps. it could also be a faulty cable I guess?

Assuming the monitor is set to display port input, be sure your cable supports Displayport Stream v1.2. This is needed to run 4K @ 60Hz. However, most cheap cables only support v1.1 which will limit you at 30Hz.
Also be sure to connect the cable to the laptops display port not through an attached Thunderbolt display.
I have the same monitor and it took a while to research the correct configuration to get it to work. I can get the monitor to recognize the laptop up to resolution of 4K @ 30Hz but not 60Hz. It should work with these settings so trying my fourth cable to see if I can get the 4K @ 60Hz configuration.
I hope this helps.

I bought a new Macbook Pro, how can I get my very old macbook cleared of my stuff so I can give it to my grandson. I just want him to be able to use it.

I bought a new Macbook Pro, how can I get my very old macbook cleared of my stuff so I can give it to my grandson. I just want him to be able to use it.

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window.
Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. You should see your hard drive in the left hand column along with your other drives. Click on the drive and select the Erase tab. Set the format value to Mac OS Extended (Journaled) and click the Erase button. After that has finished select the Partition tab. Type in a Name for your hard drive and select how many partitions you want from the Volume Scheme. The usual setting is one partition. Click on the Options button after you've selected a partition to make sure it's set for GUID. Then click the Apply button and after the Partitioning is done quit Disk Utility.
You can now follow the instructions on the install screen

My macbook pro will not detect any external monitors

My macbook pro will not detect any external monitors, worked 'once' when connect to a TV.
Have read a lot of web comments, most not very usefull.

Hi a,
Check the setting in Sys Prefs > Displays.
Try a different adapter and/or cable.

If I don't have icloud, only mobileme on my macbook pro, how do i get icloud on my computer?

If I don't have icloud, only mobileme on my macbook pro, how do i get icloud on my computer?

By upgrading to OS X Lion 10.7.2 or higher (required for iCloud). First check to see if your system meets the system requirements to upgrade.
Lion system requirements are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Mountain Lion requirements are shown here: http://support.apple.com/kb/HT5444.
If you can run Mountain Lion, you can purchase an upgrade from the Mac App Store. If you can only run Lion, contact the online store in your country and purchase a download code to download it from the Mac App Store.
After upgrading, you will find iCloud in System Preferences>iCloud on your Mac, and can set it up as explained here: http://www.apple.com/icloud/setup/mac.html.
Before upgrading, you may want to check the compatibility of your existing programs by checking here: http://roaringapps.com/apps:table.

MacBook Pro, how to set up duel monitors?

Similar Messages

Maybe you are looking for