MacBook Pro: How to turn on keyboard tactile sound

For my MacBook Pro: How to turn on the keyboard tactile sound !

I've been on Macs since about 1988 and never saw that option offered from the base system.
I Googled "mac keyboard click sound" and got a lot of hits for third-party software solutions. Give that a try.

Similar Messages

  • Macbook Pro won't turn on anymore (no sound, no power etc.)

    I have a Macbook Pro I purchased in February of 2008. Earlier this evening I was working on it, plugged in, and put it aside with the screen open. I woke it up from it's sleep mode, did a little work, then closed it and put it on the side again. A few hours later I opened it and it wouldn't wake up. I tried pressing the power button and nothing would happen.
    The light on the front is not on/blinking. When I plug in the power it shows that the battery is fully charged. The battery itself says it's fully charged too (with the battery indicator button). I tried removing the battery and putting it back in but no luck.
    When I press the power button it sounds as if the computer is going to start up (you hear that sound you hear when it would wake up from sleep or startup). But before anything happens it goes back to being dead. Basically as if the battery is completely drained.
    From googling it seems as if it may be the logic board am I correct?? If so is my HD still fine in that case? All my stuff is on it and ofcourse not backed up, besides that I have all my email and such on there too ofcourse.
    One more thing, I have a small crack in the bezel of the screen on the lower left bottom. Is there any way that may be related?? The crack has been there for a few weeks and the computer has continued to function completely normal. I've made sure there's been minimal pressure on the crack by putting a clip on it to keep the screen in it's place.
    thanks in advance

    Hi P,
    PunchDouble wrote:
    I tried pressing the power button and nothing would happen.
    This is with the power adapter connected?
    When I press the power button it sounds as if the computer is going to start up (you hear that sound you hear when it would wake up from sleep or startup). But before anything happens it goes back to being dead. Basically as if the battery is completely drained.
    This is with the power adapter connected?
    From googling it seems as if it may be the logic board am I correct??
    Certainly could be.
    If so is my HD still fine in that case?
    Should be.
    One more thing, I have a small crack in the bezel of the screen on the lower left bottom. Is there any way that may be related??
    I'm guessing the answer to that is yes. How did it get there?
    I've made sure there's been minimal pressure on the crack by putting a clip on it to keep the screen in it's place.
    Try removing the clip.
    You can try FireWire Target Disk Mode for transferring files, or remove the HD and install it in an external enclosure for 2.5" SATA HD.

  • How to turn on a MacBook Pro 15" from an external keyboard?

    Greetings,
    Is there a way to power on a MacBook Pro 15" from an external keyboard?
    Insights and assistance appreciated.
    Best regards,
    Pierson

    Nope. My setup is my laptop an external monitor with Bluetooth keyboard and trackpad. I keep the laptop lid shut. If I have to turn it on, I have to open the lid and press the power button. But I rarely turn it off.

  • MacBook Pro with external monitor and keyboard.

    Hello, everyone.
    I've tried to find the answer for this question but haven't found a clear answer with my Google search.
    My older Powerbook G4 will not allow me to work with an external monitor and keyboard with the screen in a closed position. I am about to purchase a new MacBook Pro and would like to be able to use it at home with a larger monitor and keyboard but with the lid closed and its built-in screen turned off. Can this be done ?
    How can a MacBook Pro be used (turned-on) with external monitor and keyboard while the lid is closed and the its screen is off ?
    Thank you in advance for your answers.
    Joseph

    Hi Niel,
    I have the same problem with my MacBook and I followed the instructions you posted. My issue is that when the computer wakes up after clicking the buttons on the keyboard it then quickly goes back to sleep. I can't seem to keep it awake when the lid is closed. I've been searching for an answer without any luck. Any idea how to solve this problem?
    Thanks!
    P.S. After I finished posting this message I figured out my problem. While fiddling with my computer and monitor, I inadvertently disconnected the power. After reconnecting the power, I was able to wake my computer and keep it awake. A note to other people having this issue: the computer must be connected to a power outlet to run in closed mode.
    Message was edited by: qwertyphd

  • Mid-2009 Macbook Pro will not turn on

    Hi Folks,
    so my mid-2009 15in Macbook Pro will not turn on. I updated the OS to Mavericks in December 2013. I'm from California, but I recently moved to the Guam/Marianas area where it is more humid and generally around 87 degrees F all day. For the past month my computer has worked fine, albeit I did notice the fan was running a little more than usual. I usually would just put it into sleep mode when I would finish using it (apparently a bad idea based off of reading other posts concerning humidity and, more importantly, heat). One day I finished using it, closed it and the next day went to open it; I could hear the fans start to work, but then it stopped. It hasn't turned on since. You press the power button and nothing happens. I tried all the troubleshooting stuff.
    So, my question is this: what do you think is the problem? Moreover, how much do you think it could cost to repair it? My experience with computers suggests to me that it's probably a dead motherboard. I'm wondering if it's worth trying to salvage this thing or if it would be prohibitively expensive. There are no Apple stores in the area to take it in to get advice unfortunately.
    Now, I just want to vent a little frustration. I have many apple products, and I've even switched my mother over to an apple computer, but now that I need some very basic support, apple doesn't provide a contact e-mail or a free chat? I think charging someone $19 for 'one time assistance' is ludicrous. I bet if I brought this into an apple store I could at least get some advice, and thus get some idea how I want to proceed with repairs or not. I suppose I'm also rather frustrated that my macbook, which I have been most happy with all these years, breaks because I go somewhere a little more humid and generally warmer? It would appear that the hardware failure is connected to the climate. This makes me skeptical about purchasing another mac if it can't handle a little humidity. (I have not spilled liquids on it, nor have used this computer while transitioning from an air-conditioned/humid location which could potentially cause condensation). I do not think I'm being unreasonable (yes I do think a $2500 computer should not fail after less than 5 years), but if you think I am unreasonable, please enlighten me.
    Thanks for any help. I really appreciate it.
    Ken

    Ken,
    the “Important Handling Information” in the little white manual that came in the box with your MacBook Pro states that its operating temperature range is from 50 °F to 95 °F (10 °C to 35 °C), and that its operating range of relative humidity is 5% to 90% (non-condensing). If your corner of the Pacific is outside of these ranges, the manual states that “Failure to follow these handling instructions could result in damage to your MacBook Pro”.
    I have no idea what problem your MacBook Pro has; since you’ve tried all of the troubleshooting stuff, you’ll need to somehow get your MacBook Pro to a qualified service facility to diagnose the problem. If the logic board does need to be replaced, it would probably cost hundreds of dollars for a replacement, and you might find that purchasing a replacement used MacBook Pro of the same model to be price-competitive with just replacing your MacBook Pro’s logic board.
    If you find Apple’s out-of-warranty policies unacceptable, then your only alternative to venting would be to purchase your next computer from a different company which has out-of-warranty policies more to your taste.

  • MacBook Pro 13" Early 2011 Backlight Keyboard Not Working?! Software Problem...

    So my "MacBook Pro 13" Early 2011" backlight keyboard hasn't been working. I have tried LabTick today, doesn't fix anything. Even in high or low lighting situations (dispite the Adjust keyboard brightness in low light being off) doesn't like to go on. It doesn't give me a circle with a cross like it does with that box checked in day light. It shows on the screen the
    16 dots fully light after hitting F6 fully, just it doesn't light up. I one time had to reset my Mac OS at the Apple Store, it fixed the problem, but when I restored with a time machine backup, it went back to this software problem. How can I fix this?! What is wrong with my OS? Mountain Lion? How can I fix this?!

    If it does not detect the display automatically, try going to system preferences>displays, click detect displays.

  • I bought a new Macbook Pro, how can I get my very old macbook cleared of my stuff so I can give it to my grandson. I just want him to be able to use it.

    I bought a new Macbook Pro, how can I get my very old macbook cleared of my stuff so I can give it to my grandson. I just want him to be able to use it.

    Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window.
    Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. You should see your hard drive in the left hand column along with your other drives. Click on the drive and select the Erase tab. Set the format value to Mac OS Extended (Journaled) and click the Erase button. After that has finished select the Partition tab. Type in a Name for your hard drive and select how many partitions you want from the Volume Scheme. The usual setting is one partition. Click on the Options button after you've selected a partition to make sure it's set for GUID. Then click the Apply button and after the Partitioning is done quit Disk Utility.
    You can now follow the instructions on the install screen             

  • My Macbook Pro (15 Inch) turns off randomly!!

    My Macbook Pro (15 Inch) turns off randomly (Usually when it triggers graphic card)
    Here I have a problem report. can anyone tell me what is happening????
    Interval Since Last Panic Report:  45976 sec
    Panics Since Last Report:          15
    Anonymous UUID:                    674ECA2E-A451-E88A-AB3B-EFBF7EDC1E9E
    Sun May 12 23:22:40 2013
    panic(cpu 0 caller 0xffffff7f9c3a8b25): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff80bad36000 0x0a5480a2, D0, P3/4
    Backtrace (CPU 0), Frame : Return Address
    0xffffff808bbfb7e0 : 0xffffff801bc1d626
    0xffffff808bbfb850 : 0xffffff7f9c3a8b25
    0xffffff808bbfb8e0 : 0xffffff7f9c4a24b3
    0xffffff808bbfb940 : 0xffffff7f9c4a2527
    0xffffff808bbfb9b0 : 0xffffff7f9c7b7853
    0xffffff808bbfbaf0 : 0xffffff7f9c4c8659
    0xffffff808bbfbb20 : 0xffffff7f9c3b28da
    0xffffff808bbfbbd0 : 0xffffff7f9c3adfac
    0xffffff808bbfbdc0 : 0xffffff7f9c3af9ba
    0xffffff808bbfbea0 : 0xffffff7f9c3431c4
    0xffffff808bbfbef0 : 0xffffff7f9de4971f
    0xffffff808bbfbf40 : 0xffffff7f9de488e7
    0xffffff808bbfbf60 : 0xffffff801bc3dcde
    0xffffff808bbfbfb0 : 0xffffff801bcb26b7
          Kernel Extensions in backtrace:
             com.apple.NVDAResman(8.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f9c341 000->0xffffff7f9c643fff
                dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f9c2af000
                dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f9c32d000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f9c2ea000
             com.apple.nvidia.nv50hal(8.0)[9F3D09B5-3158-3D9E-BDA3-E71576AAD3B7]@0xffffff7f9 c651000->0xffffff7f9c973fff
                dependency: com.apple.NVDAResman(8.0.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f9c3 41000
                dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f9c2af000
             com.apple.driver.AGPM(100.12.69)[FBC949AC-F94D-39CD-96A0-C6F121EA7546]@0xffffff 7f9de47000->0xffffff7f9de56fff
                dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f9c2af000
                dependency: com.apple.driver.IOPlatformPluginFamily(5.2.0d16)[3E8EEB7F-E05E-33DD-96B6-9DAFA EB4997B]@0xffffff7f9cdec000
                dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f9c32d000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f9c2ea000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    12C60
    Kernel version:
    Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
    Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
    Kernel slide:     0x000000001ba00000
    Kernel text base: 0xffffff801bc00000
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 1445307590702
    last loaded kext at 32394222521: com.apple.driver.AudioAUUC          1.60 (addr 0xffffff7f9d656000, size 32768)
    last unloaded kext at 230040050490: com.apple.driver.AppleUSBUHCI          5.2.5 (addr 0xffffff7f9cc27000, size 65536)
    loaded kexts:
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AGPM          100.12.69
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AppleHDA          2.3.1f2
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.GeForce          8.0.0
    com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
    com.apple.driver.AppleMikeyDriver          2.3.1f2
    com.apple.driver.AppleIntelHDGraphics          8.0.0
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleSMCLMU          2.0.2d0
    com.apple.driver.ApplePolicyControl          3.2.11
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleIntelHDGraphicsFB          8.0.0
    com.apple.driver.SMCMotionSensor          3.0.2d6
    com.apple.driver.AppleLPC          1.6.0
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleMuxControl          3.2.11
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.driver.AppleUSBTCButtons          235.4
    com.apple.driver.AppleUSBTCKeyboard          235.4
    com.apple.driver.AppleIRController          320.15
    com.apple.driver.AppleUSBCardReader          3.1.0
    com.apple.iokit.SCSITaskUserClient          3.5.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.2.2
    com.apple.driver.AirPort.Brcm4331          602.15.22
    com.apple.driver.AppleUSBHub          5.2.5
    com.apple.driver.AppleAHCIPort          2.4.1
    com.apple.driver.AppleFWOHCI          4.9.6
    com.apple.iokit.AppleBCM5701Ethernet          3.2.5b3
    com.apple.driver.AppleUSBEHCI          5.4.0
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleACPIButtons          1.6
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.6
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2
    com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
    com.apple.driver.DspFuncLib          2.3.1f2
    com.apple.iokit.IOAudioFamily          1.8.9fc10
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.iokit.IOSurface          86.0.3
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
    com.apple.iokit.IOBluetoothFamily          4.0.9f33
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleHDAController          2.3.1f2
    com.apple.iokit.IOHDAFamily          2.3.1f2
    com.apple.nvidia.nv50hal          8.0.0
    com.apple.NVDAResman          8.0.0
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.AppleSMC          3.1.4d2
    com.apple.driver.IOPlatformPluginFamily          5.2.0d16
    com.apple.kext.triggers          1.0
    com.apple.driver.AppleGraphicsControl          3.2.11
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.5
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.iokit.IOGraphicsFamily          2.3.5
    com.apple.driver.AppleUSBHIDMouse          175.8
    com.apple.driver.AppleHIDMouse          175.8
    com.apple.driver.AppleUSBMultitouch          235.7
    com.apple.iokit.IOUSBHIDDriver          5.2.5
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
    com.apple.iokit.IOUSBMassStorageClass          3.5.0
    com.apple.driver.AppleUSBMergeNub          5.2.5
    com.apple.driver.AppleUSBComposite          5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
    com.apple.iokit.IO80211Family          500.15
    com.apple.iokit.IOAHCIFamily          2.2.1
    com.apple.iokit.IOUSBUserClient          5.2.5
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOEthernetAVBController          1.0.2b1
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOUSBFamily          5.4.0
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.8.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          344
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.21
    com.apple.driver.AppleACPIPlatform          1.6
    com.apple.iokit.IOPCIFamily          2.7.2
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f16
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.81.22)
    Bluetooth: Version 4.0.9f33 10885, 2 service, 11 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HTS545050B9SA02, 500.11 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0608, 0xfa140000 / 6
    USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa143000 / 10
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 5
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 4
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 3
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 8
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 4
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

    Welcome to Apple Support Communities
    You have a Mid 2010 15-inch MacBook Pro and your log is showing a problem with the NVIDIA graphic.
    HansanL wrote:
          Kernel Extensions in backtrace:
             com.apple.NVDAResman(8.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f9c341 000->0xffffff7f9c643fff
                dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f9c2af000
                dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f9c32d000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f9c2ea000
             com.apple.nvidia.nv50hal(8.0)[9F3D09B5-3158-3D9E-BDA3-E71576AAD3B7]@0xffffff7f9 c651000->0xffffff7f9c973fff
                dependency: com.apple.NVDAResman(8.0.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f9c3 41000
                dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f9c2af000
             com.apple.driver.AGPM(100.12.69)[FBC949AC-F94D-39CD-96A0-C6F121EA7546]@0xffffff 7f9de47000->0xffffff7f9de56fff
                dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f9c2af000
                dependency: com.apple.driver.IOPlatformPluginFamily(5.2.0d16)[3E8EEB7F-E05E-33DD-96B6-9DAFA EB4997B]@0xffffff7f9cdec000
                dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f9c32d000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f9c2ea000
    These computers have got a damaged NVIDIA graphic which may cause unexpected restarts, kernel panics, black screens... See > http://support.apple.com/kb/TS4088
    Fortunately, Apple is repairing these computers for free, so make a backup of your data and take your MacBook Pro to an Apple Store or reseller

  • I tried to encrypt using file vault but it froze slowing my macbook pro, how can i get things moving or stop the encryption

    i tried to encrypt using file vault but it froze slowing my macbook pro, how can i get things moving or stop the encryption

    Back up all data before proceeding. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    Start up in Recovery mode. When the OS X Utilities screen appears, select Disk Utility.
    In the Disk Utility window, select the icon of the startup volume from the list on the left. It will be nested below another disk icon, usually with the same name. Click the Unlock button in the toolbar. When prompted, enter the login password of a user authorized to unlock the volume, or the alternate decryption key that was generated when you activated FileVault.
    Then, from the menu bar, select
              File ▹ Turn Off Encryption
    Enter the password again.
    You can then restart as usual, if the system is working. Decryption will be completed in the background. It may take several hours, and during that time performance will be reduced.
    If you can't turn off encryption in Disk Utility because the menu item is grayed out, you'll have to erase the volume and then restore the data from a backup. Select the Erase tab, and then select
              Mac OS Extended (Journaled)
    from the Format menu.
    You can then quit to be returned to the main Recovery screen. Follow these instructions if you back up with Time Machine. If you use other backup software, follow its developer's instructions.
    Don't erase the volume unless you have at least two complete, independent backups. One is not enough to be safe.

  • My relatives 2009 Macbook Pro won't turn on and isn't taking a charge.

    Holding down the power button has no effect and when the charger is inserted, there is no green or red/orange light. All outlets are functioning and the computer was working as it always had the day before. Help?

    Hi Cygnus and Lyra,
    Thanks for visiting Apple Support Communities.
    If the MacBook Pro doesn't respond when the power button is pressed, or seem to recognize the charger, these troubleshooting steps can help:
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    MacBook Pro: How to remove or install memory
    MacBook: How to remove or install memory
    Mac Pro: How to remove or install memory
    Mac mini: How to remove or install memory
    iMac (27-inch, Late 2012): Installing or replacing memory
    iMac: How to remove or install memory
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
    Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    You can find these steps here:
    Troubleshooting: My computer won't turn on - Apple Support
    All the best,
    Jeremy

  • HT4628 My 20111 macbook pro will intermittently turn its wifi off

    Hello,
    My 20111 macbook pro will intermittently turn its wifi off (often when it wakes up or loses signal with a  station).  It then won't turn back on unless I restart the computer.  There are also issues with my screen starting up with a much lower resolution than normal (which reverts about half way through start up to the normal resolution). and every once in awhile a patch of checkers will appear for a few seconds and then disappear.
    any ideas?  are these all caused by the same problem?

    Make a "Genius" appointment at an Apple Store to have the machine tested.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros (do this only if you know how to restore, and you have at least two independent backups.) Don’t erase the Lion recovery partition, if present.

  • My macbook pro won't turn on. it just stays stuck on a white screen with a little circle spinning around and around when you power it on.

    my macbook pro won't turn on. it just stays stuck on a white screen with a little circle spinning around and around when you power it on. i don't know how to get it to progress past this loading page.

    Resetting your Mac's PRAM and NVRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Reinstalling Mavericks, Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    If you are not using Lion, Mountain Lion, or Mavericks then use the following procedure:
    Resetting your Mac's PRAM and NVRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • How do I connect my mid-2009 Macbook pro to my HDMI television and get sound?

    How do I connect my mid-2009 Macbook pro to my HDMI television and get sound?

    Use a mini-Displayport-to-HDMI adapter and a standard HDMI cable to connect the computer to the proper HDMI port on your computer — the one that is paired with the separate RCA audio inputs (see the TV's manual for this information). And connect the headphone port on your MBP to those inputs with a cable that has a 1/8' stereo headphone plug on one end and two RCA plugs on the other. You'll also need to select the proper HDMI input in the TV's menu system, and you may have to select the headphone port as the audio output in the Sound pane of System Prefs on the Mac (or it may be selected automatically).

  • How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro

    How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro because it's not working =(

    The cheap & easy way is to just drag the app to the Trash.
    If you want to get all of the associated files use an app deleting app like the free AppCleaner;
    http://www.freemacsoft.net/appcleaner/
    Just drag an app and drop it on the AppCleaner icon in the Dock and it will find and present to you all the files it thinks are associated with the app. You can uncheck any that you want to keep and then let AppCleaner Trash the rest.

  • Macbook Pro: How do I set up a RAID system?

    Macbook Pro: How do I set up a RAID system on a MACBOOK PRO properly?
    Can I have the OS on the same drives or does it need to be seperate?
    I mostly want to do this becuase I am having a lot of problems with the "spinning ball of death" and slow speeds.  I have my RAM maxed out at 6Gigs and my 7200rpm 750GB HD is about half full.
    Am I correct in trying to do an external RAID Drive to help with speed?
    If yes, what is the best way to do this and which type of connection (USB, Firewire, etc) is best to use?
    Thanks!

    Edward House
    Edward House
    Am I correct in trying to do an external RAID Drive to help with speed?
    No
    Why is my computer slow?

Maybe you are looking for