Macbook pro/iPad3 does not sync app updates

Have the iPad (1) and the iPad3 and have updated many an app on a Dell latop that always sync'd the new purchased and updated apps with both the iPads and even my iPhone 4 without any issues (ever). I recently got a macbook pro and since then app udates and/or new purchases downlowds and updates on the macbook and on the dell laptop, but none of the apps/updates or new apps sync with any of the other devices.
Messages I get is that the computer in not authorised anymore, I then reauthorise the macbook/dell laptop and get the message that it is already authorised. then I deauthorise it and then reauthorise it, same outcome.
All the sync does is the contacts, calenders, safari browse etc etc, but when the apps ar to be sync'd updated on the pads and phone, the process status indicates that it is busy "Determining apps to sync" and without any other action and very quickly after this, the entire sync process is finished without updating the apps. The next step is the messages i get indicating that the iPad/s and/or iPhone is not authorised.
is there a setting that I need to change on the macbook that will resolve this issue or is the probelm on the tow iPads and the iPhone?
Tech's at the iStore said my iPad needed to be restored to factory default, which was done, but even that did not resolve the issue. Please help?

Go to iCloud.com and see if your Calendar is syncing there. If not, go to System Preferences/iCloud and make sure Calendar syncing is checked. If it is syncing, go to iPhone Settings and make sure it is set up to sync Calendar. If it is set up on the iPhone, try deselecting iCloud syncing, put the iPhone in the airplane mode for a couple of minutes, and then set syncing up again.

Similar Messages

HT1351 Macbook pro ical does not sync with iPhone

I enter calendar events in iPhone but they don't apperar in MacBook Pro calendar.
The reverse (enter in Macbook and they appear in iphone) works..
Whazzup?

You may have the wrong default calendar set in Settings>Mail,Contacts,Calendars>Default Calendar. Be sure you have selected your MacBook calendar as your default.

Macbook pro 2012 does not work after update, macbook pro 2012 does not work after update

After 6 weeks i started my macbook and installed q new update now it has a problem to start and restarts all the time again and again

Make certain that your MBP is connected to an AC source and is charging or charged.
Then try a SMC and PRAM resets:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Ciao.

What are the different ways to back up your photos from iphoto using a MacBook Pro which does not have a disk drive?

What are the different ways to back up your photos from iphoto using a MacBook Pro which does not have a disk drive?

Note - that no internet backup service has been proven to be safe and effective for backing up the iPhoto library - unless you personally have backup uyp an iPhoto library and restored it sucussfuly form one it should not be recommended - a large number of people have lost their photos trying it
LN

I Have a Macbook Pro that does not have a disk drive. How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased. I registered the S/N and I can't find the Free download anywhere only trials.

I Have a Macbook Pro that does not have a disk drive. How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased. I registered the S/N and I can't find the Free download anywhere only trials.

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7). What is the problem?

I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7). What is the problem?

You haven't identified the version so I can't tell if offering you contact options for Adobe Support will be of use to you. But they will likely be your only hope of getting resolution unless you just happen to be using the wrong number as the serial number.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

MacBook Pro 2009 does not start

Hi everybody, my Macbook pro 2009 does not start anymore.
I can hear the startsound, the screan lights, thats it.
I tryd PRRAM Reset, Holding down alt key,
changing RAM, nothing works...any ideas?
Thanks

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best.

Using a Huawei datacard. Didnt have problems with my old Macbook. My new MacBook Pro sometimes does not recognise it

Using a Huawei datacard. Didnt have problems with my old Macbook. My new MacBook Pro sometimes does not recognise it and Message flashes "Device disconnected or not available

Hi
Hope you found a solution by now.
I reply because others might encounter the same problem.
Mine was the one described here:
https://discussions.apple.com/thread/2656776?start=0&tstart=0
I also installed the latest version ov Mobile Partner (16.x)
Cheers,
Nick

Since I made updates of software in mavericks macbook pro 1260 does not start anymore

Hi
On my macbook pro A1260 2008, under Mavericks, I downloaded 3 upgrades: Itunes, Ibooks and a security upgrade of 100 Mo. After installation I have been asked to restart the computer in order for the updates to take effect, so did I.... But the macbook pro never started again: no chime, only dvd player noise, HDD, and Fans.
Could you help me to get out of that mess?
Thank you
C.B

There are a few different startup tricks you can use including safe mode and single user mode. I can never remember what the commands are so try to search for "mac startup commands" to be sure you're doing them correctly. They usually involve holding down the shift key, the R key, the option key or a combination.
Do you have a buddy who can help you build a bootable USB drive? The process is simple and is described on the Apple Knowledge Base article library. There are also some free apps that will do it for you.
Unlikely, but when you exhaust all other attempts, you may be looking at a total erasure of the system so I hope you have a backup.

Macbook pro retina does not recognize Tiki USB microphone

Tiki external microphone is plugged into USB port on Macbook Pro Retina, but does not show up on list of audio inputs in system preferences. I have tried restarting but nothing changed. Has anyone experienced this? I am up to date on software updates and am using 10.8.2.

Omar N wrote:... a way to get the camera on my 24" Apple Cinema display to work while hooked to my Macbook Pro Retina via thunderbolt with the lid closed?...
Pick an app and select your Display's camera. How you do this differs among apps. For some examples you can test, see iMac + 24" ACD: Apple Support Communities
If you continue to encounter the "no camera" error message,use
How to Troubleshoot iSight or LED Cinema Display (24-inch): Basic troubleshooting

MacBook Pro 2011 does not detect external monitor

I have a MacBook Pro 13'' early 2011 runing Lion 1.7.2.
I have an HP v185ws external monitor connected via an Apple Thunderbolt to VGA connector.
Since last month's Thunderbolt firmware update, my external monitor is no longer detected.
Does anybody has a solution to this problem?
Thanks.

I have a problem connecting external display (Dell U2311H) to my 13" MacBook Pro (Early 2011).
I use Tecklink Mini DasplayPort to HDMI adapter (http://www.techlink.uk.com/products/wires_cables/wiresmedia/wiresmedia_media/wir esmedia_mini_displayport_plug_to_hdmi_plug), but since U2311H doesn't have HDMI input, I also use Manhattan DisplayPort to HDMI Adapter (http://www.manhattan-products.com/en-US/products/8101-displayport-adapter).
And nothing.
The display is not detected, no picture or even external monitor presence at all.
I even reset PRAM, and installed 10.8.2 Supplementary update.
I also plugged and unplugged all I could, with no luck.
As I can see on Apple discussion, it is a common problem with 2011 MacBook Pro's.
It seems like the problem is in Thundebolt port, it somehow does not work properly.

MacBook Pro Mid2012 does not detect external monitor

After i upgraded to MAVERICKS now using my " BELKIN HDMI TO THUNDERBOLT ADAPTER "
when i connect it to TV the monitor flashes black and nothing happens no signal on TV go to settings display and sound there is nothing and when i disconnect HDMI it flashes black again ,,, help please ..
i doent know if its from MAVERICKS OR HDMI CONVERTER OR SMT TV OR THUNDERBOLT PORT

I have a problem connecting external display (Dell U2311H) to my 13" MacBook Pro (Early 2011).
I use Tecklink Mini DasplayPort to HDMI adapter (http://www.techlink.uk.com/products/wires_cables/wiresmedia/wiresmedia_media/wir esmedia_mini_displayport_plug_to_hdmi_plug), but since U2311H doesn't have HDMI input, I also use Manhattan DisplayPort to HDMI Adapter (http://www.manhattan-products.com/en-US/products/8101-displayport-adapter).
And nothing.
The display is not detected, no picture or even external monitor presence at all.
I even reset PRAM, and installed 10.8.2 Supplementary update.
I also plugged and unplugged all I could, with no luck.
As I can see on Apple discussion, it is a common problem with 2011 MacBook Pro's.
It seems like the problem is in Thundebolt port, it somehow does not work properly.

Macbook Pro Screen Does Not Turn On

I just updated the firmware my Macbook Pro (late 2007-2008). It has been running on Mountian Lion for about a month, and the update was the newest set released by Apple. The firmware was installed and the laptop rebooted. I heard the chime, and then the computer screen never came on. I can turn it on, but the screen never comes on. The white light on the front of the computer comes on, and does not blink, even if the screen is closed. I have held the power button down to force shut down, and it will eject a disk if one is in the drive, but the screen still does not come on. It makes no noise when I reboot it manually.

Try a smc reset:
http://support.apple.com/kb/HT3964
Also try a pram reset. Power off, power on holding the keys: Option, command,P,R(no commas) press the keys before thr start chime, then hold them till you hear the chime 2 times. Release and reboot.
ATB

Itunes will not sync app updates to phone

Syncing phone to itunes on Win8. Set to sync music manually. After downloading all app updates to laptop, syncing does not update apps on phone. Thoughts?
Found solution in another thread right after I posted this. Thanks anyway.

Hi throgs!
You may want to try to manually manage the music on your iPod touch. You can do this by following the directions in the following article, and attempting to sync your music that way:
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
If you do not wish to manually manage your music, you can also try to sync automatically, but first you will want to sync the iPod with the "Sync Music" box checked, but no boxes checked in the fields for Genre, Album, Artist, or Playlist. Then choose the items you would like to sync from those fields and attempt to sync them again. This will wipe out the music that is on your iPod now, but may allow you to sync the music back onto the iPod after that. Thanks for coming to the Apple Support Communities!
Regards,
Braden

MacBook Pro screen does not turn on after using external display?

Hello,
I am using a 15 inch MacBook pro from mid 2012. At work I connect it via mini-display port to an eternal monitor. Recently however, sometimes after I go home and try to turn the laptop back on, it turns on, but the screen does not. If I connect it to another external monitor, it uses that as the default display. Sometimes I can just restart the laptop and everything is fine, other times I have to turn it back on while holding the shift key in order for the laptops built in display to be used.
After work, I unplug the mini-display port, and then power off the laptop.
Can anyone help me understand why this may be happening so I can prevent it from happening again?
Thank you.

Try a smc reset:
http://support.apple.com/kb/HT3964
Also try a pram reset. Power off, power on holding the keys: Option, command,P,R(no commas) press the keys before thr start chime, then hold them till you hear the chime 2 times. Release and reboot.
ATB

Macbook pro/iPad3 does not sync app updates

Similar Messages

Maybe you are looking for