MacBook Pro is forgetting time and date and wep password
Hi,
My Macbook Pro is forgetting the time and date even though I have automatically set time and date checked.
It is also forgetting it's wep password.
This is a pretty new computer.
I've seen a few posts about this, but it doesn't seem like anyone has a solution yet. Any ideas would be much appreciated.
Thanks
I'm having the same problem and it started right after the Apple Store replaced the logic board in my MacBook. Every time I restart the computer, it says that none of my wireless networks can be found and when I select my network, I have to re-enter the password. It warns me that the date and time were forgotten. Also, two firewall alerts come up asking if I want to allow access to a DNS agent and something else that seems to be related to wi-fi access.
I'm considering tossing out some preference files or resetting the NVRAM as troubleshooting measures.
Similar Messages
-
I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
I saw this report being sent to Apple:
Interval Since Last Panic Report: 581719 sec
Panics Since Last Report: 10
Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
Fri Mar 7 13:00:14 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805e5f3a00 : 0xffffff8000204d15
0xffffff805e5f3b00 : 0xffffff80002d1208
0xffffff805e5f3c50 :
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
Run Rember first... call back with results.
Good luck,
Clinton -
I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.
OS X can natively read NTFS of Windows, but not write to it.
Windows can't read or write to HFS+ of OSX, and that's a good thing from a security standpoint.
Ideally if you share files between operating systems you should have a FAT/MSDOS formated USB key or hard drive. (exFAT external drive if any of your files are over 4GB in size) both these formats are universal for OS X or Windows.
If you install software into Windows and OS X to read each others formats, then you have to pay to update/upgrade it deal with headaches.
If you swtich between Windows and OS X a lot, don't need full hardware performance for Windows, you may consider installing virtual machine software like VMFusion or Parallels which can take a copy of your Windows in Bootcamp and place it into OS X as a file then run that copy of Windows in a window in OS X like so.
Advantage here is you run most of your light weight Windows programs like this at the same time as OS X.
Benefit is you can run just about any Windows or Linux version and OSX server editions (not client versions)
Bootcamp only allows Windows 7, that's it now.
You'll also be interested in two fre pieces of software, Carbon Copy Cloner and Winclone on macupdate.com.
CCC clones OS X partition and Winclone clones the Bootcamp partition. Valuable for you.
Good Luck -
I have a macbook pro 10.8.5 and the Application Safari will not open no matter what i do, I try to open the menu of Safari but it won't let me either, the mouse will just be loading. Each time i open it, it says "Application Not Responding" and I try opening it in my Finder and it'll say "The Application 'Safari' cannot be opened." and below that it'll say "-1712" Please help? I would really like to open it again.
The application Safari can't be opened -1712
What to do about "The application 'Safari' can't be opened" -1712 ? -
How can I sync my iPhone 4 with a new MacBook Pro without losing all my data and settings?
I used to sync my iPhone 4 with a PC running Windows XP until the hard drive died. Thankfully, I already had a backup of all my iTunes media (Songs, TV Shows, Movies, Podcasts, Apps, etc), so when I bought a new MacBook Pro, transferring my iTunes library was easy.
My problem now is that I want to sync my iPhone 4 with my new MacBook Pro without losing all the data and settings. I have already used iTunes to back it up and transfered my purchases onto the mac. I just need help to sync the iPhone with the Mac without losing app data, emails, contacts, settings.
Everytime I click on the tabs (to sync contacts, apps, music, et al), I get an error message that reads:
"Are you sure you want to sync apps? All existing apps and their data on the iPhone “Ryan's iPhone” will be replaced with apps from this iTunes library."
What do I do? Any help would be greatly appreciated.
Thanks,
RyanRead through this helpful document on this subject: https://discussions.apple.com/docs/DOC-3141
-
My macbook pro recently got swiped and I lost all my data, problem is, just before it was swiped I set up my new iphone 5 which transferred all my photos and music over which is no longer on the computer. What will happen to my phone if I plug it in?
I never used icloud before so there is no data to back up from. I just spoke to the apple store and they said that if I do plug it in, all the data will be swiped....is there a program I can use to transfer my data from my phone to computer without loosing it all ???
Renee -
I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Now have numerous problems. Is it possible to go back in time with Time Machine and reinstall Snow Leopard? Then upgrade to Lion or Mavericks? Any other ideas on how I can exit Yosemite?
Once you get yourself back to Snow Leopard, if you still want to upgrade somewhat, I would suggest the following:
1. Get an external hard drive that you can use for experiments with new OS versions. You could partition it into 2 or 3 partitions. You could then clone your existing Snow Leopard system to one partition using Carbon Copy Cloner (well worth $40) or SuperDuper ($25).
2. Buy OS X Mountain Lion for $20, through the Apple online store (I don't think it's available through the App Store). Apple has decided to make it very difficult for anyone to get Mavericks unless they have already downloaded it.
You will receive two e-mails from Apple, one containing a PDF with a redemption code, and one with the password you will need to unlock the PDF. Using the code, you will download Mountain Lion from the App Store, where it will appear among your Purchased items.
After ML finishes downloading, its installer app will launch itself. When you see this launch screen, QUIT the install app immediately! Go to your applications folder, find the Install OS X Mountain Lion app, and copy it to a safe location outside of your Applications folder. Keeping one or more copies will allow you to reinstall without unnecessary aggravation if you later need or want to do that. At this point, you can re-launch the Installer in the Applications folder and let it run. You can install it on a clean partition on your external HD, or you can allow it to upgrade the Snow Leopard clone you created on your external drive, or you can do both. This should allow you to test how everything works for as long as you like.
3. If you left yourself a free partition on your test drive, try a clean install of Yosemite and set everything up from scratch (do not migrate anything). This will allow you to see whether your problems with it were related to something in your Snow Leopard system. -
What is the best USB powered portable 1TB hard drive for a macbook pro that allows Time machine to work, windows (thru Parallels software) and mac storage and is available in Australia?
I agree with teh OWC sggestion above, but why must it be USB powered? I find that far more unreliable, and the low power devices slow.
I'd frankly get a good external enclosure and buy a bare drive. But the OWC stuff is quite good - vastly better than some of the majors (WD being aprime example of stuff that's boderline quality and often not compatible)
Grant -
My old Macbook Pro (10.4) died and I need to locate from the HDD where Netscape mail data resides so I can import it onto my new laptop, any ideas where it is located? I have tried home/library/mail.
Might be in /Home/Library/Netscape/ or in /Home/Library/Applications Support/ folder.
-
I have been trying to update my software in my macbook pro, but every time I go through the motions of updating/restarting my computer nothing happens and it still shows I need a software update. Anyone know why this is happening?
How large is your HD and how much space do you have left?
Check out the following & do the necessary:
Disconnect all devices from the computer then do the following:
Boot up from your Snow Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
Try SU again.
If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius. -
I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibted sign. Any suggestions pls.
Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
MacBook Pro 2011 get hot and noise all the time and slowly ?
hi. why MacBook Pro get too hot and make a noise all the time i have Yosemite ,mac late 2011 and became very slow?
Games are very CPU/GPU intensive applications and will heat up the MBP. That will result in the fans increasing speed in order to dissipate the heat. This actually is an expected result and for the type of application, is 'normal'.
I you plan to play a lot of games, consider getting a cooling pad twhich will tend to mitigate the heating.
Ciao. -
Recently I bought a MacBook Pro, the first time I entered a disc into the disc dive it wouldn't load up in Itunes - just kept freezing; and the disc drive made a lot of noise, how can I fix this?
I've had my mac for less than a month and for the first time I put in a disc. I can hear a laser sort of noise as well as the disc flapping about or a motor sort of sound? Sounds really bad to me :/
Someone please help!Sounds like a hardware issue.
Did you buy the system from Apple? If so how recent is recent? If it is new you have 14 days to return it, not sure what the situation is with refurb systems. If it is over 14 days you should still have warranty support make an appointment at an Apple Store or contact Apple support.
If you bought it from someone other then Apple you will need to contact them.
good luck
regards -
I have a question? I update my macbook pro but every time I do and I go back to where it says software update it says that if I want to update my pro I just did, and Im using Mac Os X snow leopard is it that I have to upgrade to lion?
It also says view updates, so select that option and see what it wants to update.
-
I restored a Macbook Pro from a Time Machine backup and now none of my passwords are working (and I know they are the correct passwords). What can I do?
First, make sure caps lock is not on.
Another reason why the password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. You can select one of the available layouts by choosing from the flag menu in the upper right corner, if it's showing, or cycle through them by pressing the key combination command-space or command-option-space. See also this support article.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password. In OS X 10.10 and later, this option also works with FileVault, but only if you enabled it when you activated FileVault. It's not retroactive. Otherwise, see below.
Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.
Start up in Recovery mode. When the OS X Utilities window appears, select
Utilities ▹ Terminal
from the menu bar at the top of the screen—not from any of the items in the OS X Utilities window.
In the window that opens, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select the startup volume ("Macintosh HD," unless you gave it a different name) if not already selected. You won't be able to do this if FileVault is active.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
▹ Restart
from the menu bar.
You should now be able to log in with the new password, but the Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as the login password), there's no way to recover it.
Maybe you are looking for
-
Can anyone tell me how to find my network password
I've just managed to get my iMac and my MacBook Pro set up for sharing. On the MacBook Pro: when I clicked finder, go, connect to server and then put my password in I was told it is invalid. Wshen I tried the same thing on the iMac: the password wa
-
COnfirmation/ Order acknowledgement in PO
Hi Any body is worked on Confirmation / acknowledgement . Hi all , You can see the PO item level confirmation. if you aware please let me know the IMG setting and IDES function ( BOTH Purpose of Confirmation ) How we do step by step procedure of conf
-
I have administrator rights to the computer. The drivers are up to date. But I am still getting the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again" when openi
-
Produce EXE files for Swing programs using Visual J++?
There's a way to make VJ++ to compile Swing programs: http://www.stanford.edu/class/cs108/usingvj.html But the exe file VJ++ produces won't run though... Does anyone know how to make it work? Thanx in advance
-
Performance problems using WLS6.1 with the thin driver for Ora9i from OTN
Hello everyone, Has anyone been experimenting with the thin driver for Oracle 9i under WLS6.1. I got it running, but I get extremely bad performance when having multiple concurrent accesses. It works more or less in single user mode. Also it seems no