MacBook Pro is operating more and more slowly in opening and closing, opening and closing programs and accessing and closing from mobile broadband. Is there a solution to this problem?
MacBook Pro is operating more and more slowly in opening and closing, opening and closing programs and accessing and closing from mobile broadband. Is there a solution to this problem?
Did you try rebooting?
Similar Messages
-
How to get to kernel on a MacBook pro with booting issues. Internet restore has not bee successful. It will not boot from 10.5 install disc cause I recently upgraded to lastest ox.
Any help is appreciated.Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd -
my airplay from my MacBook Pro to my tv through my apple tv is fuzzy- it just started being fuzzy about 2 months ago- it used to be clear- anyone else have this problem? How can I fix it?
Hi freezebri,
The following steps may resolve your issue:
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
If your TV screen appears fuzzy or black (you see no video)
Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Selectbutton will immediately cycle to the next resolution.
If you are connected via HDMI, try unplugging and replugging your HDMI cable.
If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video.
Hope this information helps ...
- Judy -
Hi All,
I am currently trying to backup my iTunes library onto an external hard drive so that I can copy it onto my new Macbook Pro. I have been following the steps posted on the Apple website however each time I get a dialogue box stating:
'The operation cannot be completed because you do not have sufficient privileges for some of the items'.
Is this because I have items that were bought under another persons iTunes account? If so, is there a solution to this problem? Or am I doing something completely wrong?
Thanks in advance,
Sbrooks19Go through the below forum with similar issue and follow the process mentioned by "Macjack" in the beginning.
https://discussions.apple.com/thread/4499820 -
i used to have an app store and lost it and i created a new one and i can not update the iphoto app on my macbook pro because it was updated with the old account, is there a solution for this problem?
Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID. -
I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?
Apple changed MobileMe to iCloud and then restricted iCloud to 10.7 users only unfortunately
If your machine is a 64 bit processor Intel Mac you can upgrade to 10.7 for $29, however a lot of your 10.5/10.6/Rosetta based software could cease to function, especially third party hardware drivers for printers, fax machines, all-in-ones, scanners etc.
http://roaringapps.com/apps:table
Also depending how old the machine is, if it can accept 4GB of RAM (preferred), older video card, may not run 10.7 very well or stable.
My advice is to keep at 10.6.8, get a web based email service that's plaform/hardware neutral, forward your iPhone emails there. Gmail/Yahoo Mail for instance.
When your ready for new hardware and all new software, then buy a new machine.
If your going to go to 10.7 on your present hardware, I advise you clone 10.6.8 to a external drive first, that way you can c boot off the 10.6 disk erase the drive completely (necessary to remove hidden Lion Recovery Partition) and option boot off the 10.6.8 clone and reverse clone.
http://www.bombich.com/get_ready_for_lion.html -
I just bought an I pad abd find that it is compatible with Adobe Flash Player which I need to play bridge on BBO. Is there a solution to this problem?
No Flash for iPads, iPhones, or iPods
Here's why there's is no Flash available for iDevices or other mobile devices. Adobe was unable to provide a product that was suitable to the needs of battery powered mobile devices used for Internet browsing. Existing Flash technology used too much memory, ate battery life, and was buggy. Simply put Flash did not work well on mobile devices.
Apple's Steve Jobs led the escape from Flash dependency when Apple introduced the iPhone, and later introduced the iPad. There was a hue and cry over the omission. Time proved Jobs was right on target.
So this is why there is no Flash for your iPhone or iPad or iPod nor for most SmartPhones. Flash has been abandoned by many sites in favor of supported technologies such as HTML5 or by providing their own custom app.
Here is Steve Jobs official comment on his momentous decision to omit Flash from iDevices: Steve Jobs on Flash.
Here is Adobe's later announcement to cease development of Flash for mobile devices: Adobe on Mobile Flash.
Now, you are not necessarily out on a limb. There are some apps that can display some Flash, but don't count on there ability to display anything using Flash.
Apps that can display some Flash from the Web:
Puffin
SkyFire
Photon Flash
Browse2Go
iSwifter
Also, note that many sites that use Flash provide their own app for accessing their material. So check with your favorite sites and find out if "there's an app for that." -
In PC I have changed the default app location from (c:/users/username/My Music/iTunes) to other (d:iTunes) and copied the previous content to new location and changed the Default location in Edit preference. Now in iTunes, my previous apps are not visible. Is there any solution to this?
wjosten - thanks very much for the detailed instructions. I'll try this as soon as I get my replacement and it looks like you'll probably end up getting the green tick
-
I am having heraing problem with iPhone 4S.Speaker and headphone works well.No echo.When I use handset to receive or make calls,I can't hear anything?I restore the phone and removed the plastic as well.Is there anyway to fix this problem?
I personally haven't experienced much of the "reverberation/feedback" when using a headset on the i4S...
Yes, I have near-perfect hearing too (for scope, squeaky brakes hurt my ears) I come from many conversations on many phones and types and first off, CDMA technology is great for coverage, terrible for voice quality. HD Voice in Europe made for some of the best phone conversations I've ever had.
Back on track, feedback is most noticable (similar to the landline phone) when using the iPhone without a headset, but for me it's not an absolute criticality mainly because I use VoIP apps alot, so maybe it has desensitized me some over the past year.
But whenever I'm on a call, and the other person has me on speakerphone, I have alot of trouble talking because of the feedback loop caused. So the less of my voice I hear the better I can talk.
Have you tried a bluetooth headset yet? -
Hello I have a iPhone 4s worked him a lock Software Claude and I have a tray device please Is there a solution to this problem
Hi sami jouni,
Please post your question in your native language. Sorry, but what you have provided does not make sense.
GB -
Whenever I open up my Macbook Pro, Firefix is unresponsive. I can see all of my tabs, but nothing (except the top pull-down menus) are clickable. If I wait a few minutes it seems to work again, but I usually have to force quit. Anyone else have this problem?
Firefox uses plugin-container.exe to run Flash and other plugins. The theory is that if the plugin were to crash, it would not crash all your tabs, just any active plugins. Are you getting a message that a plugin crashed?
If I understand the problem correctly, Firefox is hanging or freezing when trying to open a link, and you are exiting Firefox, after which it won't start up again until you kill firefox.exe in the Task Manager.
Have you noticed any pattern to when Firefox freezes or stalls?
How are you exiting Firefox (for example, from the menu vs. red X button vs. Ctrl+Alt+Delete)?
In case you haven't seen it, this article might be useful: [[Firefox hangs or is not responding - How to fix]]. -
After taking days to upload elements 13 I am now having trouble even trying to import my images and videos into the program for editing. Each time I IMPORT files an error message comes up that says " ....has stopped working, we are looking for a solution to the problem and will notify you if a solution is found" I have not been able to edit ANYTHING or even drag files/images to the time line.... is it me? is my computer too slow? surely if it was, then Adobe elements 13 would not have installed in the first place? please someone help me sort this out as I have a deadline to make for a docco! thanks in advance Lyddy
From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•You MUST use an account with Administrator Privileges to run Premiere Elements
•(Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors)
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.1 update)
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.9.4"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
•How many and what speed are your hard drive(s)... ie 5400rpm or 7200rpm or?
And some other questions...
•What are you editing, and does your video have an orange line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool -
My Iphone was bricked when i woke up one day . It was showing restore screen so i restored it but while restoration it showed (-1) error. Is There any method to resolve this problem.
I know very well how to restore Iphone.
The restoration process struck at baseband upgrade and restoration process ends with -1 error. -
I normally use Outlook for Mac as the standard email and calendar programm. When I use the USB cable fro synchronising contacts and calendars with my iPhone 4s ther is not problem at all. iCal, Mail and Oulook for Mac are synchronising perfectly.
When I switch to iCloud, Oulook is completely empty and Calendar and Contacts are not synchronised anymore.
Is this a known problem, and is there a solution for it?I have the same keyboard and do not have battery issues.
It may have something to do with using rechargeable batteries.
You can also try removing the keyboard then re-pairing it. Maybe a bad bluetooth connection is draining the battery.
System Preferences > Bluetooth > right-click (control-click) on the keyboard > Remove > Remove
Wait for it to show in the bluetooth list then Pair > enter the number sequence & return as displyed on the screen. -
I tried to upload final cut pro on my new computer but it says that it no longer supports the application is there anything I can do to make it work?
I assume the MBP is new and you have Lion on it (10.7)?
Here is what will run:
http://support.apple.com/kb/HT4769
charlie
Maybe you are looking for
-
How can I see my account/charges...I have charges on my Visa I didn't make.
-
Cannot install OS (system hangs) on K7N2GM-L
I've just put together a (mostly) new system. The system posts OK, but when I try to install either Slackware or Win2k, the system hangs. Slackware consistently hangs after recognizing the cd drive, with a message about a kernel bug, while Win2k ha
-
HTTP response code: 500 Internal Server Error
Hi, I am working on OpenScript 8.5. 1) When i play back the script i got the following error message in result view. oracle.oats.scripting.modules.http.api.exceptions.ThinBrowserException: HTTP response code: 500 Internal Server Error * see the Resu
-
I am working on a client server project where the server has access to a MS Access database, i wish to transfer ResultSets to the Client program but cannot because of serialisation. I have in the passed broken down the resultSet on the server side an
-
HT4528 I need to connect my iphone 5 to my bluetoot but never find the divice what do I need to do?
my iphone 5 is not pairing with my bluetoot!