MacBook Pro is stuck on Grey Screen with "restricted" symbol.

My MacBook Pro fans were loud and unusual, so when I looked up what to do on google most of the results told me to reset the SMC. So I did that, expecting it to work, and now my MacBook Pro won't go past the Reboot screen! The strange thing is, it doesn't stay on the Apple logo like most people say. Instead, the apple logo changes into the "Restricted" Symbol and just stays there.
I assumed it was part of the SMC process so I left it alone. But it's been happening for hours now. I even restarted it several times and it still stays with the Restricted sign. I tried redoing the SMC process and I even tried resetting the PRAM. Nothing has worked. Pressing Command-S or Command-R doesn't do me much good either. I'm worried that something went wrong with the harddrive and I cannot afford a new Mac or the repairs for it.
Can anyone help me?

Rieev wrote:
My MacBook Pro fans were loud and unusual, so when I looked up what to do on google most of the results told me to reset the SMC.
This is usually the remedy for out of control fans.
So I did that, expecting it to work, and now my MacBook Pro won't go past the Reboot screen! The strange thing is, it doesn't stay on the Apple logo like most people say. Instead, the apple logo changes into the "Restricted" Symbol and just stays there.
Ok, it's not booting up to OS X, which when loaded will control the fans to settle down, but the default if OS X doesn't load is eventually turbo mode.
You have basically what's called a "gray screen issue"
Go through the Steps here and it will fix it,, provided it's not a hardware issue.
Step by Step to fix your Mac

Similar Messages

  • My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help?

    My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help I have tried everything I know to do

    Unfortunately this means that there is a problem in the boot sector of your hard drive. It might be indicative of a fundamental corruption in the coding that allows your computer to boot your operating system from your hard drive. I had this problem twice and it resulted in me having to get a new hard drive and restore my data.
    In other words, your computer can't talk to your operating system so you can't access your data.
    Here is my advice: DON'T CALL APPLE TECH SUPPORT though they are kind and usually helpful it will take you an hour just to explain the situation and they will only tell you to do what I'm gonna say here.
    First: Shut down your computer completely
    Two: boot up while holding down the following keys: command, option, p, and r. The computer will reboot 3 times. This solution will likely fail so if you're frustrated skip to the next step.
    Three: Boot up while holding down the option key. Select recovery drive. Select your default language. Select disk utility, click on Macintosh HD, and select "verify and repair volume." Likely the verification will produce some line like "unused node not erased." Or something like that. If anything using the words "node structure" comes up, you need a new hard drive.
    If after verification and repairs you still can't boot I sincerely hope you have apple care because you will need a new hard drive. Set up an appointment to come in to the apple store, they will tell you to go and get data recovery, just ask them to give you the old hard drive. Unless you have an up to date backup in which case you can just restore from that. If you're lucky the only issue is with the boot sector which means that if you ask them to give you the old hard drive, you can buy an enclosure and you have effectively been given a free external hard drive. It still works to store data just not to load an operating system.
    If you have a back up drive bring it to the apple store and they'll do the whole thing right there, it should take around an hour and a half but may take longer.
    Hope this helps, it's annoying but it's your safest bet.
    All the best.

  • My new MacBook pro is stuck on grey screen after loading kies, My new MacBook pro is stuck on grey screen after loading kies

    My new MacBook pro is stuck on a Grey screen after I downloaded Samsung kies on it. How do I solve this problem?

    Hi there,
    You may find the troubleshooting steps in the article below helpful.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    -Griff W.

  • MacBook Pro 2011 stuck on grey screen after loading

    Hi guys. I've already checked many threads in many forums, but I can't succeed in this problem.
    I have a Macbook Pro8,2 (2011) that doesn't go beyond the boot screen, regardless of which disc you boot it from (tested with 4 different bootable partitions). Apple logo with spinning wheel, then grey screen with fast spinning fans. I tried everything: safe mode, netboot, single user mode, accessing recovery, resetting SMC and PRAM, Apple Hardware Test (it states it's all ok). I even took off the ram sticks singularly and unplugged the internal hard drive to realise if the SATA cable is faulty. Nothing has worked so far.
    Any other suggestions before I call Apple Supoprt and pay hundreds of euros for a new logic board?

    ultraago,
    You may have the problem that I, and scores of others, have had with the faulty GPU found in a number of 2011 models, as discussed here -> https://discussions.apple.com/thread/4766577?tstart=0.
    Usually the problem begins with graphics glitches and then it's downhill from there. The AHT will not report any problems and neither will the tests that the Apple techs have available.
    If you do have this problem, then having the GPU reballed is the least expensive, and longer lasting, 'fix.' Apple will want to replace your logic board - don't fall for that scheme (unless you're still under warranty). I had my logic board replaced because I have AppleCare until next year. But once my AppleCare runs out and the problems come back again, I'm going the reball route.
    Good luck,
    Clinton

  • When I turn on my MacBook Pro I get a grey screen with a folder icon and a question mark. I can't the computer to boot up.

    What do I do when I power up the computer and get a grey screen with a folder icon and a question mark?

    vickyfromosseo wrote:
    What do I do when I power up the computer and get a grey screen with a folder icon and a question mark?
    Read this: A flashing question mark or globe appears when you start your Mac

  • HT203176 MacBook Pro is stuck on gray screen with spinner & won't proceed to login screen

    MacBook Pro running Mavericks gets stuck on the gray screen at start up with the spinning wheel & never reaches the login screen. Please help. Resetting Pram, starting in Safe Mode do not work.

    Also do not have installation disks for a Disk a Utility start up.

  • I have snow leopard installed as an OS.  When trying to reboot a MacBook Pro I am getting stuck on grey screen with apple logo and rotating symbol.  What can I do?

    I have snow leopard installed as an OS.  When trying to reboot a MacBook Pro I am getting stuck on grey screen with apple logo and rotating symbol.  What can I do?

    Maybe this might help.
    http://support.apple.com/kb/TS2570

  • My MacBook Pro is stuck on grey loading screen with apple logo and spinning wheel.

    PLEASE HELP - Tried to start up my MacBook Pro and I get grey screen w/ apple logo & spinning wheel. It's stuck on this screen. Safe mode didn't help but reveled this: smc read key action error, BOOS key failed, BOPS key failed. Consider rebuild of prelinked kernal com.apple.kext triggers triggered rebuild. IOBluetooth host controller USB transport Suspend Device. I ran verifications/repairs in Disk Utilities, but nothing came back wrong on the reports. I'm a bit panicked, as I use this computer for work and have no other computer to use in the meantime. I should also note that I have very little technical knowledge, so if you can lend your help please keep that in mind when responding. I'd be over the moon if anyone can help.

    Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
    Startup - Gray Screen
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • My MacBook is stuck on grey screen with rotating circle

    My MacBook is stuck on grey screen with rotating circle

    See this Apple note on dealing with that.  If you have OS X 10.8 Mountain Lion, this is the equivalent note, howver, it's not as detailed.

  • Downloaded OSX Mountain Lion on MacBook now stuck on grey screen with spinning wheel HELP?!?!

    Downloaded OSX Mountain Lion on MacBook now stuck on grey screen with spinning wheel. What can I do, will I loose everything on my laptop?

    ashg23 wrote:
    Thank you, I have restarted but it is still stuck at the grey page with the spinning wheel? Any idea?
    Have you started up holding down Command + R and attempted to install again?
    Pete

  • Intel-based iMac stuck in grey screen with spinning wheel. SMC::smcReadKeyAction ERROR THOP kSMBadArgumentError(0x89)

    Hi guys,
    since yesterday my Intel-Based iMac doesn't boot normally, its stuck in grey screen with a spinning wheel.
    Its an Intel-based iMac 21.5'' purchased in 2011, and i recently (2 months ago) upgraded it to Mavericks.
    -2 weeks ago, i installed smcFanControl app
    -Tried start up in Safe Mode by holding Shift but its not working. i think i hear fans are working more than they were before the problem occurs.
    -entered Single User Mode and i get an error
    SMC ::smcReadKeyAction ERROR THOP kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8029fa1000
    -followed some instructions found online, but can execute the correct commands in SingleUserMode
    tried to remove FanControl as explained here: http://apple.stackexchange.com/questions/110667/errorr-kernel-smcsmcreadkeyactio n-in-console
    any ideas what may caused this and how can i fix this?
    Thanks in advance

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
         a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, boot from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 10
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 11
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 12
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • G5 start up problem: stuck at grey screen with fans running full strength

    hi, i'm new to discussions, so i hope this question and my technical knowledge and descriptions will be OK: problem: G5 20" stuck at grey screen with fans running full strength..
    so far i've tried but did not work:
    - power off by pressing the button for 5 secs,
    - checked all cables connections etc, take out the power cable try again, etc.
    - removed all USB connections, re-did
    - tried to use it as 'target drive' connected to my macbook by firewire
    - tried to start up and keeping C key pressed
    - tried to start up with 'shift' key pressed
    - tried to start up with command, options, P and R keys pressed,
    - i had an additional RAM, i've taken it out and tried again, no luck
    - i've put in Mac OS X install disc1, no luck, and now disc is inside my iMac, can't take it out
    any recommendations? thank you!

    Scroto,
    You may not actually have a bad processor. On the Dual G5's it's not uncommon after a few years for dust and corrosion to build up between the processors and their sockets. You can fairly easily remove the processors and clean the connections yourself if you're at all handy. Basically, snap off the heatsink covers, loosen a few screws and the processor and heatsink come out as a unit.
    Clean the contacts on the processors (carefully). And clean the sockets. Be sure to put the same processor in the same place or you'll have issues.
    I used 90% isopropol alcohol to clean mine last year. Let it air dry and blew both the socket and the cpu off after with canned air. That done, I reinstalled the processors, buckled everything up and no more "bad" processor... The machine worked perfectly from then on and I assume it still does today. Don't know, someone stole it last month:(...

  • Start up screen stuck on grey screen with apple logo and spinning gear

    Start up screen is stuck on grey screen with apple logo and spinning gear. What should I do?

    See this thread with dominic23’s suggestions:  https://discussions.apple.com/thread/5783326?tstart=0

  • My macbook turns on to a grey screen with a folder in the middle of the screen.  I don't know what to do to get it to turn on...

    My macbook turns on to a grey screen with a folder in the middle of the screen.  I don't know what to do to get it to turn on...
    This has never happened.  I have tried to do the command-option-p-r trick and that didn't work. HELP

    That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the hard drive data is somehow corrupted.
    Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That willforce your MacBook to boot from the install DVD in the optical drive.
    Once it has finished booting and you Choose Your Language and you are at the Install screen launch Disk Utility from the Utilities menu. Is your Hard Drive in the list on the left?
    If it is then select the First Aid Tab run Repair Disk and if that repairs any problems run it again until the green OK appears and then run Repair Permissions.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • My MacBook pro is stuck on white screen after shut down. Now, neither this is turn on nor turn off. I had to do

    My MacBook pro is stuck on white screen after shut down. Now, neither this is turn on nor turn off.

    You should be able to turn off your MBP by pressing the power button down continously for about 5-10 sec. When you reboot it you are going to want to enter into a terminal screen. Hopefully the following YouTube video helps: http://www.youtube.com/watch?v=qKOX72xNmbo

Maybe you are looking for