Macbook pro, isight, imovie problem

im trying to use imovie to record video off my builtin isight camera. If i shart imovie, and select the magic movie option then my isight starts up and i can see the image on the screen, but there is a dialogue box open on the right hand side of the imovie screen that says 'searching for dv camera' this dialogue box searches for about 30 seconds and then claims no video device could be found!!!!! If i then click on ok, my isight turns off and i am left with a bland imovie screen. Very annoying. All my SMC and Firmware is fully up to date, All application upgrades installed. And i have no other programs open that use the isight camera. isight works fine in all other applications. Any suggestions?
Thanks
Macbook Pro 2.16 7200rpm Hd   Mac OS X (10.4.6)   Boy is It Hot

I just got a new imac with built in isight and am trying to learn how to record from isight too. I tried doing this with ichat open and it said there was no connection. I closed ichat and used the following directions and it worked.
The directions sound like it is for the external isight but the switch in the diagram is in the lower left of the imovie screen. Open imovie and try these directions:
To capture live video from an iSight camera:
Open the privacy shutter on your iSight. (For the external isight)
Click the mode switch to set iMovie HD to camera mode (Lower left of imovie screen, not on camera).
Click the camera icon to the left of the mode switch and choose iSight from the pop-up menu. (Make sure ichat is closed)
Click the Record With iSight button at the bottom of the iMovie monitor.
The video you see in the iMovie monitor is recorded as a clip in the Clips pane.
Click Record With iSight again to stop recording.
Click Record With iSight again to stop recording.
iMac-Intel   Mac OS X (10.4.6)  

Similar Messages

  • Macbook pro isight quality problems anyone?

    Hi,
    Is anyone facing problems with the quality of the isight camera on the retina macbook pro?
    It feels like the image is very badly compressed and the outcome is muddy and not smooth.
    My old Imac at 640x480 had a much better image? is it worth sending it back for replacement or do you think this is an OS issue which will be resolved?
    Thanks in advance for any help.

    If:
    (1) the image of a static, constantly lighted, subject  shown from your iSight is changing color as you watch it,
    and
    (2) you have not added any third party software to manually control your iSight (example: iGlasses)
    then yours is likely a hardware problem that will require professional service by an Apple-Authorized Service Provider.
    If Apple's troubleshooting suggestions from http://support.apple.com/kb/HT2090 don't correct your problem, (be sure to test more than one app in more than one user account,) make a current backup of all your important files and then see your AASP for service.
    Message was edited by: EZ Jim

  • How do I upload my DV videos to my macbook pro if iMovie doesn't recognize a Sony DCR-TRV20?

    I purchased a firewire 800 9-pin to 4-pin cable and then found out my macbook pro nor imovie '11 even recognize my cameras existence.  I have precious videos on mini DV tapes that I need to upload.  Any suggestions?

    Hi
    My long notes on this
    NO CAMERA or A/D-box
    Cable
    • Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
    • Test another FW-Cable very often the problem maker.
    Camera
    • Test Your Camera on another Mac so that DV-in still works OK
    • Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
    • Some Cameras has a Menu where You must select DV-out to get it to work
    • Camera connected to "charger" (mains adaptor) - not just on battery
    • Camera set in Playback mode - NOT Recording mode
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK e.g. recording and playback to TV)
    A/D-box
    • Is the dip-switches set right ?
    • Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
    • Try resetting it
    Connections
    • Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
    Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
    the Movie project to dedicated external hard disk.
    • FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
    External device’s (hard disk’s)
    • Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
    • MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
    Mac
    • Free space on internal (start-up) hard disk ? Please specify the amount of free space.
    (Other hard disks don't count)
    I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
    after material is imported and edited. No Camera or A/D-box
    • GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
    • Does Your Mac have a FireWire Port
    • White MacBooks - don't
    • MacBook-Air - don't
    if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
    else - NO SOLUTION
    Only option as I get it is either
    • Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
    • Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
    • If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
    You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
    has one and this FW-Card-port works greatly.
    SoftWare
    • Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
    • Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
    • FileVault is off ? (hopefully)
    • Screen Saver - OFF
    • Energy Saver - OFF
    Using WHAT versions ? .
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie’08 (7.1.?), 09 or 11 ?
    • iMovie HD 6 (6.0.4/3) ?
    Other ways to import Your miniDV tape
    • Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    • If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE Mac OS Extended   formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    from LKN 1935.
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten.
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check.
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About . . / More . .
    under Firewire.. what do you read . . ?
    More
    • FileVault - Secure that it’s turned off
    • Network storage - DOESN’T WORK
    • Where did You store/capture/import Your project ?
    External USB hard disk = Bad Choice / FireWire = Good
    If so it has to be Mac OS Extended formatted
    ----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
    mbolander
    Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
    I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
    No Camera or bad import
    • USB hard disk
    • Network storage
    • File Vault is on
    jiggaman15dg wrote
    if you have adobe cs3 or 4 and have the adobe bridge on close that
    or no firewire will work
    see if that helps
    DJ1249 wrote
    The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
    MaryBoog wrote
    Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
    //support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
    What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
    Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
    Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
    Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
    This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
    Yours Bengt W

  • Macbook pro touchpad/curser problems.

    macbook pro touchpad curser problems.  typing randomly jumps to wherever the curser is resting at the time.  unbelievably maddening.  multiple devices same all have same problem.  hard to believe we cannot find anything on the apple site about this.  MANY complaints outside of this site on this issue... clearly a touchpad/battery design flaw being ignored by Cupertino.  during the writing of this post, the curser jumped randomly and started typing in a different location six times.  IMPOSSIBLE to use as a word processor since typing becomes quite frustrating.  HELP.  any ideas?  Fanboy and shareholder.  three macbook pros in the house...all the same problem. (please do not offer separate keyboard as solution...this is a laptop, not a Surface Pro...)

    Go step by step and test.
    1. Restart
    2. Shut down the computer.
        Clean the trackpad with moist not wet microfiber cloth.
        System Preferences > Point & Click
        Try turning off three finger dragging and then turning it on after  testing.
    3. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
      4. Reset PRAM:   http://support.apple.com/kb/PH14222
    5. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    6. Close all windows and quit all applications.
        Click the Spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
        Select Disk Utility from the drop down. When the Disk utility window opens up,
        select  Macintosh HD, then First Aid.
        Click Repair Disk Permissions button.
        Ignore the  time remaining estimate.

  • Hearing conflicting reports. What camcorders work best with macbook pro  and imovie

    I am looking to purchase a new HD Camcorder, but Im told some of them dont work well with macbook pro and Imovie.
    Im in the process of buying a new iMac and want to make sure I will be able to load the movies direrct to imovie.
    Thanks.

    This forum is for mobile iMovie (iPads & iPhones).
    you may need the iMovie Mac forum:
    https://discussions.apple.com/community/ilife/imovie

  • My 15" macbook pro have big problems identifying and connecting to my wireless network

    my 15" macbook pro have big problems identifying and connecting to my wireless network. I have no problem connecting to my neighbour´s. Also I have a 13" macbook pro, a 13" macbook, 2 ipads and 3 iphones (3, 4 and 5) and none of these have any problems connecting to my wireless. My 15" is running Mac OS X 10.7.5, has a 2.66 GHz Intel Core I7 proc and 8 GB Ram

    Hi Frodey,
    Thanks for using Apple Support Communities.  This article has steps to take to troubleshoot connecting to a wireless network and may help:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Cheers,
    - Ari

  • 2012 MacBook Pro Intel i7 (purchased May 2013) constantly drops airport connection. My 2006 MacBook Pro has no problems connecting and staying connected.

    I received a 2012 MacBook Pro INtel i7 for my birthday this May 2013. It constantly drops my airport connection. My ancient 2006 MacBook Pro has no problem connecting to airport, nor staying connected. I've had to write this message several times as I keep losing the airport connection and have to reconnect. BTW: I am less than five feet from the airport base.
    Thanks for help.

    After trying all of the above the suggestions, the problem returned as before. However, after digging some more I discovered that the issue appears to lie with the 10.4.10 version of the Mac OS; when I checked the software log under the system profiler I noticed that I had installed that update at about the time my Airport problems began. Apple then quietly released a v 1.1 combo update to 10.4.10 on July 2nd, which once installed appears to have resolved the problem. You can find the download at http://www.apple.com/support/downloads/macosx10410comboupdatev11intel.html
    What's curious is that originally Apple listed that the v 1.1 combo update resolved some issues with RAW image data, and some sound problems, which don't seem to have anything to do with Airport.

  • My mac book pro, deleted mi imovie, when a buy my macbook pro my imovie was in my apps, why i have tu buy and pay for that app now? i'm want my imovie back!

    My mac book pro, deleted mi imovie, when a buy my macbook pro my imovie was in my apps, why i have tu buy and pay for that app now? i'm want my imovie back!
    please!!! I HELP ME!

    I DONT UNDERSTAND why pay for imovie, because i;m pay for that when i buy the macbook pro..

  • MacBook Pro iSight not working

    Hi! I have my MacBook Pro for almost 4 years now and ever since I have not encountered any problem with it not until few months ago. I was working with my output during that day and I put it to sleep using the monitor part. After a while, my laptop would not turn on like I tried using the charger, etc. So I brought it to the Apple Center right away. They could not fix it and they have told me that my LCD needs to be replaced because my camera can not be detected and that the processor needs to be replaced. After knowing the things to be replaced and the cost, I was almost decided that I should just buy a new one than having it repaired because those two combined cost more than a new laptop. After a month, I tried my best to open my laptop and there it opened but the sad thing is, the camera cannot be detected in Photobooth, Quicktime, iMovie, Skype, etc. I have also checked in the system profiler and there is no iSight thing there. I have tried resetting the SMC thing already but still no solution. Please help? Thank you!!
    PS I have updated to Mavericks a month before the "crash".

    Graceful Hope wrote:
    I've had my Macbook Pro for just over three months and used the built-in isight frequently, but yesterday it simply stopped working. (The irony is that I was talking to several people about how much I love my mac when I opened photobooth and discovered a blank screen.) The green light is on in all the applications I've tried and it still shows up under "utilities" in the system profiler, but the screen is blank each time I try to use it. I've tried all the tips I can find online, but it still won't work. Is there anything else I should attempt before taking it in for service?
    Welcome to Discussions, Graceful Hope
    It seems you are doing everything right!
    If you have tried everything except taking your new Mac for service from
      http://support.apple.com/kb/HT2090
    and the behavior is the same in every user account you test, have it serviced now.
    The AASP will soon have you happy again so you can continue to enjoy the new Mac!
    Message was edited by: EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

  • MacBook Pro iSight not working after 10.6.5

    After upgrading to 10.6.5 the iSight on my older MBP Core Duo no longer works. It shows up as detected in the System Profiler, but when I try to access the camera through Skype, iChat, FaceTime, and PhotoBook all I get is a black screen and the green light doesn't come on.
    Skype says "camera in use by another application" even though nothing else is accessing the camera.
    PhotoBooth returns a black screen.
    FaceTime doesn't load properly, only returns a black rectangle of a window.
    I tried uninstalling the Google video/voice plugin but that didn't do anything. I repaired permissions several times, that didn't help either. Any thoughts?

    jmcopeland wrote:
    After upgrading to 10.6.5 the iSight on my older MBP Core Duo no longer works. It shows up as detected in the System Profiler, but when I try to access the camera through Skype, iChat, FaceTime, and PhotoBook all I get is a black screen and the green light doesn't come on.
    Skype says "camera in use by another application" even though nothing else is accessing the camera.
    PhotoBooth returns a black screen.
    FaceTime doesn't load properly, only returns a black rectangle of a window.
    I tried uninstalling the Google video/voice plugin but that didn't do anything. I repaired permissions several times, that didn't help either. Any thoughts?
    As a follow up, I rebooted and reset the PRAM, checked the camera on another user account, and still have the same problem.
    Two ideas, jmcopeland
    (1) try all relevant suggestions from http://support.apple.com/kb/HT2090
    If your iSight problem still occurs in more than one app and more than one user account, the PMU (SMC) reset suggested there often restores proper function of inbuilt iSight.
    (2) If the problem still exists, aapply the Combo Update. If you don't already have a trusted Combo update method, use this one:
     • Backup you Mac
     • Disconnect all peripherals
     • Restart your Mac
     • Use Disk Utility to repair permissions
     • Download and install http://support.apple.com/kb/DL1324
     • Repair permissions again as soon as the update is complete
     • Test iSight again per http://support.apple.com/kb/HT2090
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5);
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

  • Macbook Pro Beach Ball Problems

    I have a '08 MBP that has the spinning beach ball showing up in all the apps during use and everything runs slower.
    Web pages take 5-10 seconds to load.
    Lightroom photos take 5-10 seconds to load. Commands and mouse selections take 4-5 seconds to respond.
    It slows down even more with an external monitor being used.
    The fan runs high 85% of the time.
    Hard drive was replaced with an SSD about 2 years ago, which helped calm HD noise.
    The HD has 15.5 GB left right now, but the beach ball problem has been there even with half the HD full.
    Problem has been going on for a couple of years, but I've managed around it.
    This issue occurs even with only 1 app running. For instance, I'll shut all apps except one application, and it still drags, whether that one app be Safari or LR.
    I realize the MBP is older, but it used to be very responsive with the same apps. Never used to see the beach ball during app usage, only at startup of app if anytime.
    I believe the RAM is maxed out for what this machine can handle at 4GB, but again, the system didn't slow down before.
    I believe the problem may be some processes running in the background that are dragging down everything, but not sure what to look for.
    Any advice any fixes are greatly appreciated.
    Here is the EtreCheck:
    Hardware Information: ?
      MacBook Pro (15-inch  2.4/2.2GHz) (Verified)
      MacBook Pro - model: MacBookPro3,1
      1 2.2 GHz Intel Core 2 Duo CPU: 2 cores
      4 GB RAM
    Video Information: ?
      GeForce 8600M GT     - VRAM: 128 MB
      Color LCD 1440 x 900
      Cinema HD 2560 x 1600
    System Software: ?
      OS X 10.9.4 (13E28) - Uptime: 0 days 21:27:44
    Disk Information: ?
      SAMSUNG SSD 830 Series disk0 : (256.06 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 255.2 GB (15.5 GB free) (Low!)
      Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information: ?
      Apple Inc. Built-in iSight
      X-Rite, Inc. i1Display3
      Logitech USB Receiver
      Apple Computer, Inc. Apple Cinema HD Display
      Seagate Backup+ Desk 3 TB
      S.M.A.R.T. Status: Verified
      disk1s1 (disk1s1) <not mounted>: 262 KB
      3 Seagate (disk1s3) /Volumes/3 Seagate: 3 TB (2.04 TB free)
      Apple Computer Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
      Apple Inc. Bluetooth USB Host Controller
    Gatekeeper: ?
      Mac App Store and identified developers
    Kernel Extensions: ?
      [not loaded] au.com.glassechidna.heimdall_usb_shield (6.0) Support
      [loaded] com.aladdin.kext.aksfridge (1.0.2) Support
      [not loaded] com.devguru.driver.SamsungACMControl (1.4.20 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungACMData (1.4.20 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungComposite (1.4.20 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungMTP (1.4.20 - SDK 10.5) Support
      [not loaded] com.devguru.driver.SamsungSerial (1.4.20 - SDK 10.6) Support
      [not loaded] com.jft.driver.PdaNetDrv (1.0.0d1) Support
      [loaded] com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) Support
      [not loaded] com.roxio.BluRaySupport (1.1.6) Support
      [not loaded] com.roxio.TDIXController (2.0) Support
      [not loaded] com.sandisk.driver.com_sandisk_SanDiskImageMate (1.0.17) Support
      [not loaded] xxx.qnation.PeerGuardian (1.1.9) Support
    Startup Items: ?
      HP IO: Path: /Library/StartupItems/HP IO
    Problem System Launch Daemons: ?
      [failed] com.apple.Kerberos.digest-service.plist
      [failed] com.apple.Kerberos.kdc.plist
    Launch Daemons: ?
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.adobe.SwitchBoard.plist Support
      [running] com.aladdin.aksusbd.plist Support
      [running] com.aladdin.hasplmd.plist Support
      [loaded] com.bombich.ccc.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [not loaded] com.logmein.logmeinblanker.plist Support
      [running] com.logmein.logmeinserver.plist Support
      [loaded] com.logmein.raupdate.plist Support
      [not loaded] com.palm.novacomd Support
      [failed] com.tvmobili.tvmobilisvcd.plist Support
      [running] com.xrite.device.xrdd.plist Support
      [failed] xxx.qnation.PeerGuardian.kextload.plist Support
    Launch Agents: ?
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [failed] com.logmein.LMILaunchAgentFixer.plist Support
      [running] com.logmein.logmeingui.plist Support
      [running] com.logmein.logmeinguiagent.plist Support
      [not loaded] com.logmein.logmeinguiagentatlogin.plist Support
      [running] com.sandisk.SanDiskImageMate.plist Support
      [failed] com.tvmobili.artwork.plist Support
      [loaded] com.xrite.device.softwareupdate.plist Support
    User Launch Agents: ?
      [loaded] com.adobe.ARM.[...].plist Support
    User Login Items: ?
      Scroll Reverser
      iTunesHelper
      iTunesHelper
      LMILaunchAgentFixer
      Connect360Helper
      PdaNetMac
      Music Manager
      Canon IJ Network Scanner Selector2
      Dropbox
      Android File Transfer Agent
      i1ProfilerTray
      fuspredownloader
      KiesAgent
      HP Scheduler
    Internet Plug-ins: ?
      AdobePDFViewerNPAPI: Version: 10.1.10 Support
      Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
      EPPEX Plugin: Version: 3.0.5.0 Support
      AdobePDFViewer: Version: 10.1.10 Support
      LogMeInSafari32: Version: 1.0.935 - SDK 10.7 Support
      googletalkbrowserplugin: Version: 5.4.2.18903 Support
      iPhotoPhotocast: Version: 7.0
      QuickTime Plugin: Version: 7.7.3
      FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
      DivXBrowserPlugin: Version: 2.0 Support
      CouponPrinter-FireFox: Version: Version 1.1.5
      LogMeIn: Version: 1.0.935 - SDK 10.7 Support
      Silverlight: Version: 4.0.50524.0 Support
      Google Earth Web Plug-in: Version: 7.1 Support
      AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 2.3.2.6 Support
      o1dbrowserplugin: Version: 5.4.2.18903 Support
      JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
      OfficeLiveBrowserPlugin: Version: 12.3.6 Support
    Safari Extensions: ?
      feedly-2
      Greenhouse
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User iTunes Plug-ins ?
      TuneUp Visualizer: Version: 2.2.0 Support
    User Internet Plug-ins ?
      fbplugin_1_0_3: Version: (null) Support
      Move-Media-Player: Version: npmnqmp 071505000006 Support
      BrowserPlus_2.8.1: Version: 2.8.1 Support
      CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
      Picasa: Version: 1.0 Support
    3rd Party Preference Panes: ?
      BrowserPlus  Support
      Connect360  Support
      DivX  Support
      Flash Player  Support
      Flip4Mac WMV  Support
      MacFUSE  Support
      MusicManager  Support
      Perian  Support
    Time Machine: ?
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 237.67 GB Disk used: 223.24 GB
      Destinations:
      Seagate Backup Plus [Local] (Last used)
      Total size: 3 TB
      Total number of backups: 42
      Oldest backup: 2012-11-15 08:13:19 +0000
      Last backup: 2014-09-01 15:11:17 +0000
      Size of backup disk: Excellent
      Backup size 3 TB > (Disk size 237.67 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU: ?
          11% WindowServer
          1% AdobeCrashDaemon
          0% i1ProfilerTray
          0% xrdd
          0% fontd
    Top Processes by Memory: ?
      500 MB Adobe Photoshop Lightroom 4
      123 MB com.apple.WebKit.WebContent
      102 MB Safari
      82 MB Finder
      70 MB WindowServer
    Virtual Memory Information: ?
      709 MB Free RAM
      1.70 GB Active RAM
      714 MB Inactive RAM
      636 MB Wired RAM
      1.79 GB Page-ins
      28 MB Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • MacBook Pro - iSight

    K - back when boot camp originally came out the iSight camera would cause a BSOD if it was enabled, so I disabled it in windows XP. Problem is, it's been a number of years, and now I want it back on. I've upgraded to Vista, and I've upgraded to 10.5. I can't find the hardware listed anywhere, and I would prefer not to have to reformat my computer to enable it in a hardware profile. I'm really not sure how to do that at this point, because it doesn't show up in my device manager.
    Even in OS 10.5 the photobooth says I don't have any camera's. The Apple system profiler doesn't think it exists.... Physically the thing is still embedded in the frame of the macbook pro, so I haven't gone crazy, I just can't access it.
    I think what went wrong is that when I installed Vista, it was disabled, and therefore wasn't picked up. Similarly when I upgraded from Tiger it wasn't enabled so it wasn't picked up. So now neither operating system sees the hardware, and I have no clue how to re-enable it.
    Any help would be appreciated.

    Hello Jamoke
    I suggest that you boot OS X and try all relevant suggestions in Apple's How to Troubleshoot iSight.
    The reset suggested there usually restores function for the Mac OS side.
    If not, post back which apps work with iSight and which ones that should do not. Also tell us if the results are EXACTLY the same for EVERY apps in EVERY user account that you test.
    I suggest you try to get it working in OS X first. Once you have your built-in iSight working with Mac OS and can see your iSight as a USB device in System Profiler, your iSight should be able to work in Windows provided that you have installed the drivers from Leopard's Boot Camp.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2)  External iSight

  • MacBook Pro Retina - iMove or iPhoto Won't Start

    I just used the migration assistant to migrate my files from my old MacBook Pro to my new MBP Retina.  It went smoothly, but I cannot run iPhoto or iMovie.  When I click either icon neither application displays, and the icon in the dock has the white light underneath indicating the app is running.  If I do a ps aux from the command line, I can see the the apps are running.  But again, the applications are not visible at all.
    Could it be a file/ownership or permissions issue?
    -Thanks

    It is defenataley not a file permision issue, because Mac's do need permisions to open applications, unlike Windows. One can actually cappy an Application From a Mac to another Mac, and it will run perfectly, the only problem is you will need the original Apple Id that purchased an item in order to update it.
    You Can Try: right-clicking(ctr clicking) the applications at the dock and making sure windows are not hidden. (If it is hidden you shoud see a "show" option.
    Replacing the apps. To do this copy the applications from the application folder to a USB, or other starage device. Go to : Macantosh HD > Library > Applicatoin Support > (iphoto) and (iLife) + (iLife Media Browser) + (iLifeSlideshow) and copy these files to your storage devise.
    Replcae all of the files youve just copied onto your new MacBook.
    If none of these work, please tell me.

  • Does any one else with a mid 2012 13 inch macbook pro have this problem?

    I took my computer in for repair last year having this problem and the problem has started again. I don't know why this happens because I am very carefull with my laptop and never use it on my lap. I also have a shell case on the computer and put this in a laptop sleeve. Also,  have friends that abuse their laptops and have the same model as me and they have never had this kind of issue. My software is up to date so I don't think thats a problem.
    Model: Macbook Pro 13 inch Mid 2012
    I purchased this in June 2012 and do not have apple care so if someone can tell me how much the repair for this problem will cost that would be great!

    That looks like a GPU or display problem.  Make an appointment at an Apple store genius bar.  The evaluation will be free regardless of warranty status.  You will be told what repair costs will be, which you may accept or decline.
    Bring the image with you just in case the MBP starts to behave it self in front of the technician.
    Ciao.

  • Could these (MacBook Pro) keyboard/trackpad problems be Leopard related?

    My (MacBook Pro's) keyboard and trackpad stop working every couple of minutes. And then suddenly comes back. The capslock key and it's LED is also not responding anymore when it happens.
    Could this be a software thing? I'm about to send this MacBook Pro back and get a replacement, but that would be kind of pointless if this is a software problem caused by Leopard.
    Anyone in the same situation?
    S.

    I have a MacBook Pro running 10.4.11, and mine started out having the exact same problems:
    First, the keyboard took 2-3 minutes to be recognized after waking from sleep. Then, a few days later, the keyboard and trackpad would quit unexpectedly during use, took a few minutes to start working again. Then it went off a cliff from there. For the past 5 days, my keyboard and trackpad are not working whatsoever, I've tried all of the suggestions I can find online, nothing works. From the moment I startup, to the moment I shut down (thankfully I have a wireless Mighty Mouse) neither of them are recognized. I've had it on for 8 hours straight and it still didn't recognize the keyboard or trackpad. They don't show up in the system profiler under the USB section, and on top of that the on screen keyboard only types in lowercase, nothing happens when I hit the shift or Caps Lock key on the on screen keyboard.
    I called Apple 4 days ago, they said that this is a priority issue and hope to have a fix out within a couple of weeks...yes...a couple of weeks, they said that they had the fix, and were just waiting on patents to go through (you have to be kidding me right?). Their temporary "fix" is to buy an external keyboard and mouse.
    This is not by any means a Leopard only issue, and you can trace posts about this online all the way back to October 1, 2007, well before Leopard was released to the public.
    The crazy thing is, if you look at this and don't assume it was caused by Apple, this bug behaves exactly like a virus, and a very well written one at that.
    Message was edited by: adapaw

Maybe you are looking for