Macbook Pro isn't excepting my password

I tried inserting my user name and password but they don't accept it

Re-read 1. "Log in with an administrator account. Tip: If you don't know the password of any administrator accounts, see "Resetting the original administrator account password" below."

Similar Messages

Macbook pro isn't accepting my password?

My macbook Pro isn't accepting my password. How can I log in?

Boot from your install disc and reset your password. The password reset utility is under the Utilities drop down menu.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

My macbook pro isn't automatically connecting to wifi when I open it. I have to manually enter the password every time although I always click "remember password". PLease advise

My macbook pro isn't automatically connecting to wifi when I open it. I have to manually enter the password every time although I always click "remember password". PLease advise

Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences ▹ First Aid
If the box marked
          Keep login keychain unlocked
is not checked, check it.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

Macbook pro isn't starting

my macbook pro isn't starting. it gets as far as the apple logo and loading wheel but does go any further, please help!!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 9
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My key to increase backlighting of keys for my MacBook Pro isn't functioning

My Key to increase backlighting of Keys for my MacBook Pro isn't functioning.

Check your settings in System Preferences>Keyboard.
Try a SMC reset:
http://support.apple.com/kb/ht3964
Ciao.

Hi, my Macbook Pro isn't charging when I plug in my charger and the light on the charger thing isn't lighting up. How can I tell if the charger or the computer is broken? Also, is there a way to fix it? Thanks.

Hi, my Macbook Pro isn't charging when I plug in my charger and the light on the charger thing isn't lighting up. How can I tell if the charger or the computer is broken? Also, is there a way to fix it? Thanks.

Not sure how I would tell if the contacts are stuck, but they look normal. The other stuff:
Battery Information:
Model Information:
Serial Number:    W0046Q08UBX0A
Manufacturer:    SMP
Device name:    bq20z451
Pack Lot Code:    0000
PCB Lot Code:    0000
Firmware Version:    0201
Hardware Revision:    000a
Cell Revision:    0157
Charge Information:
Charge remaining (mAh):    3211
Fully charged:    No
Charging:    No
Full charge capacity (mAh):    5845
Health Information:
Cycle count:    943
Condition:    Normal
Battery Installed:    Yes
Amperage (mA):    -1354
Voltage (mV):    11210
System Power Settings:
AC Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    10
Wake On AC Change:    No
Wake On Clamshell Open:    Yes
Wake On LAN:    Yes
Display Sleep Uses Dim:    Yes
GPUSwitch:    2
Battery Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    2
Wake On AC Change:    No
Wake On Clamshell Open:    Yes
Current Power Source:    Yes
Display Sleep Uses Dim:    Yes
GPUSwitch:    2
Reduce Brightness:    Yes
Hardware Configuration:
UPS Installed:    No
AC Charger Information:
Connected:    No
Charging:    No

TS3391 I movie 09 on my Macbook Pro isn't recognizing the presence of my Sony handycam dvd201E - nor does it offer options - any advice please? dave R

I movie 09 on my Macbook Pro isn't recognizing the presence of my Sony handycam dvd201E - nor does it offer options - any advice please? dave R

I have a MacBook Pro 15 inch early 2011.
The new features available in OS X Yosemite like Continuity, Handoff,etc are not supported in this model.
I did upgrade RAM to avoid any possible slowdown.
I found replacing the HD with SSD is too expensive for a 4 years old model.
Replacing the CPU/GPU is not for amateurs.
If you think that rebuilding a Mac part by part is a viable option, please go ahead and rebuild it.
Best.

Hi.i have an macbook pro with a forgotten efi password.how i to install a new mac OS on the my macbook?, hi.i have an macbook pro with a forgotten efi password.how i to install a new mac OS on the my macbook?

hi...i have a macbook pro with a forgotten efi password.i want to remove it for install a new OS....please help me!!

No. The only people that can help you are at an Apple store.
Just how in the world did you forget a Boot EFI password?
Next time you buy a computer don't set a EFI/BOIS password. If you must WRITE IT DOWN so you can always refer to it.

How do I login to my macbook pro if I forgot my password?

How do I login to my macbook pro if I forgot my password?

If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password. In OS X 10.10 and later, this option also works with FileVault, but only if you enabled it when you activated FileVault. It's not retroactive.
Otherwise*, start up in Recovery mode. When the OS X Utilities window appears, select
Utilities ▹ Terminal
from the menu bar at the top of the screen—not from any of the items in the OS X Utilities window.
In the window that opens, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select the startup volume ("Macintosh HD," unless you gave it a different name) if not already selected. You won't be able to do this if FileVault is active.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but the Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as the login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

I just bought a macbook pro and asks me the password, says it has expired and I accept that I do?

I just bought a macbook pro and asks me the password, says it has expired what I do?

marsrover25 wrote:
I recently purchased a macbook pro and qualified for the free Mountain Lion update. Now that I've received the very long content code from Apple, where do I go to enter this information? Is there a link within apple.com? This is my first apple computer so I'm not a proficient user. Thank you
Sign into the App Store with your Apple ID. App Store should be in the Dock.
Cheers
Pete

My Macbook Pro keeps on saying my password is incorrect, but my password hint is the same?? Help?

My macbook pro, is telling me my password is incorrect. I have tryed to change it but it continues to tell me that my old password is incorrect? so i tryed to use the password that i had tryed to change it to and continues to tell me its incorrect. As well the hint for my old password continues to stay there?? Please help??

See #6 here for 10.6, 10.7, 10.8
..Step by Step to fix your Mac
If you don't have the 10.6 disk or it's damaged
Snow Leopard 10.6 password reset, no disk method

My MacBook Pro isn't a year old yet and would like to use iCloud. However, very apprehensive about Lion upgrade...how can I find out what I will lose if I upgrade?

My MacBook Pro isn't a year old yet and would like to use iCloud. However, very apprehensive about Lion upgrade...how can I find out what I will lose if I upgrade?

Ajimd33 wrote:
I appreciate the prompt response. Having read several threads, you can appreciate why I would be hesistant to upgrade to the Lion. All I basically use is Office for Mac and the other basic functions such as email/calendar/address/contacts...etc. I have read horror stories about peoples stuff dissapearing into cyberspace and obvi dont want that to happen.
That's all nonsense. Most people don't post anything if they don't have any problems. People who do have problems usually have very specific reasons for them that they have caused themselves.

Hello..i have the macbook pro and i had a password when it opens and when i have updated the software when i delete something it asks me every time to put my password ;/ how do i delete my password or just correct a setting for it?

hello..i have the macbook pro and i had a password when it opens and when i have updated the software when i delete something it asks me every time to put my password ;/ how do i delete my password or just correct a setting for it?

You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
Repair User Permissions

HT201612 My 2007 Macbook Pro isn't able to download Mac OS X 10.5 because the software is apparently up to date on 10.4.11?

My 2007 Macbook Pro isn't able to download Mac OS X 10.5 because the software is apparently up to date on 10.4.11?

Mac OS X 10.5 has never been available as a download, only on DVD.
It sounds like you're using Software Update and expecting to see 10.5 as an option, but that's not how it works. Software Update will update minor versions within the same Mac OS X branch (e.g. anything in the 10.4.x series), but it won't upgrade major versions (e.g. 10.4 -> 10.5). For that you need the DVD.

My MacBook Pro is asking for a password, when trying to play DVD. Anybody experienced that before.

One of user's MacBook Pro is asking for a password, when trying to play DVD. Anybody experienced that before?
Maybe the DVD itself is password protected, the user is travelling abroad.
Thank you in advance

Hi m,
My guess is the DVD is from another region than the one the optical drive is set to. Region changes are limited to 5 total, so it asks for the admin password to make sure you want to do it/allow it. After #5, the drive is locked to that region forever.

Macbook Pro isn't excepting my password

Similar Messages

Maybe you are looking for