Macbook Pro lags when charging.

My Macbook Pro seems to lag very badly when charging since I updated to Yosemite a day ago.
But on the contrary it runs smoothly when unplugged.
I thought it was supposed to be other way around?
I am puzzled.
My specs:
MacBook Pro (13-inch, Late 2011)
2.8 GHz i7
4GB RAM
Intel HD3000

Hi , I am basically having the same problem.
I downloaded Yosemite Beta 3 few weeks ago, and this same problem occurred. I wasn't able to do anything with the laptop as it loads all the time. I contacted Apple and they told me I should restore from my backup which enables it to get back on Mavericks. When the official Yosemite was launched, I installed it, and now it has the same problem. The laptop lags like crazy everytime the charger is plugged in. I am unable to Skype, watch a movie, browse the internet, open an App or even type a document while the laptop charges. Im not sure of the solution, but will try calling apple again. Safest bet is to downgrade to Mavericks by backup i guess. Oh yeah, i have about 150+ Gb memory but when i checked dick utility it shows I have 18.6 mb free space and the other 36 GB.
Specs:
MacBook Pro Early 2011
13 inch i5
4GB Ram
Yosemite....

Similar Messages

MacBook Pro HOT when CHARGING

My MacBook Pro get hot at the bottom when its charging, should I be worried?

Battery charging does work on the battery so some heat build up is normal...if it feels hot enough to you that you think it is a problem, drop by an Apple genius bar and have it checked out by the techs to be sure all is ok.

What is the normal temperature for MacBook Pro's when charging?

I really wanted to know because sometimes I feel like my MacBook Pro is too hot. I don't want anything to melt in there. So I decided to download a temperature monitor.
What is the highest healthy temperature a MacBook Pro can reach?
Also ---
What is the average temperature of a MacBook Pro?
Thank you so much! Any help would be greatly appreciated.

Hi
I have a NewerTech external charger with an inbuilt battery calibrator. It provides 2 charging methods: it either fast charges or conditions (calibrates) the battery. Fast charging, which fully charges the battery in about 2 hours, causes the battery to noticeable heat up. However, conditioning, which discharges then recharges the battery, is so gradual that the battery remains cool (at ambient temperature).
The charger has 2 slots (for 2 batteries) and will charge or condition 1 or 2 batteries but not at the same time. For example, it will fast charge one battery and when finished switch to conditioning the second battery. This charging regime means the universal power supply connected to the charger can be less powerful (and smaller), i.e., it will deliver sufficient current to fast charge one battery at a time. Batteries may be left in the charger which automatically switches to trickle charge when continuous charging finishes.
The heat generated by the battery in the MBP is caused by fast charging and whilst I have never made any temperature recordings of the base of my MBP I can confirm that sometimes it gets so hot that it can be painful if in contact with the skin, e.g. resting on ones lap. This is normal. The battery also heats up when the MBP is running solely on battery power. Excessive heat could indicate a battery fault and it should be removed and examined immediately as any distortion, e.g., swelling, can damage the MBP.
An external charger/conditioner is useful if you have a spare battery, or two.
Regards
Phil

Hi, my Macbook Pro isn't charging when I plug in my charger and the light on the charger thing isn't lighting up. How can I tell if the charger or the computer is broken? Also, is there a way to fix it? Thanks.

Hi, my Macbook Pro isn't charging when I plug in my charger and the light on the charger thing isn't lighting up. How can I tell if the charger or the computer is broken? Also, is there a way to fix it? Thanks.

Not sure how I would tell if the contacts are stuck, but they look normal. The other stuff:
Battery Information:
Model Information:
Serial Number:    W0046Q08UBX0A
Manufacturer:    SMP
Device name:    bq20z451
Pack Lot Code:    0000
PCB Lot Code:    0000
Firmware Version:    0201
Hardware Revision:    000a
Cell Revision:    0157
Charge Information:
Charge remaining (mAh):    3211
Fully charged:    No
Charging:    No
Full charge capacity (mAh):    5845
Health Information:
Cycle count:    943
Condition:    Normal
Battery Installed:    Yes
Amperage (mA):    -1354
Voltage (mV):    11210
System Power Settings:
AC Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    10
Wake On AC Change:    No
Wake On Clamshell Open:    Yes
Wake On LAN:    Yes
Display Sleep Uses Dim:    Yes
GPUSwitch:    2
Battery Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    2
Wake On AC Change:    No
Wake On Clamshell Open:    Yes
Current Power Source:    Yes
Display Sleep Uses Dim:    Yes
GPUSwitch:    2
Reduce Brightness:    Yes
Hardware Configuration:
UPS Installed:    No
AC Charger Information:
Connected:    No
Charging:    No

My macbook pro will not charge when I am using it.

My macbook pro will not charge when I am using it. My battery will say "charged" then "not charging" and it goes back and fourth. It says "Power Source: Power Adapter". But when I use my pro it will loose the power source then reconnect a second later to it. This problem is getting annoying because I have to stop using my macbook pro to charge it.

Reset SMC.
http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best.

My macbook pro will not charge or turn on. When I plug in the charger nothing happens and the light doesn't turn on. What can I do?

My macbook pro will not charge or turn on. When I plug in the charger nothing happens and the light doesn't turn on. What can I do?

Some basics please, what vintage is your MBP, have you plugged anything else into the wall socket to verify that it is live? which light doesn't turn on, the charger or the MBP?
Hold the power button down for 15 seconds, wait for 2 then press it normally and see te MBP it turns on

When the battery charged fully in macbook pro and the charger (AC Adapter)

when the battery charged fully in macbook pro and the charger (AC Adapter) is connecting (Showing Green Lamp) to the macbook pro does that effect to the battery live of the macbook pro with Retina Display 15'' ME665
Also I want know the Best headphone compatible with macbook pro Retina that help me to Hear and Record ?
Notes ( the macbook pro 15" has just one port for the headphone usually it's tow for record and hear)
Best Regards,

The MacBook Pro charging circuit will charge the battery until it reaches 100% charge and then switch to power mode for the MBP. When the battery drops to 93-95% charge the circuit will switch back to charging mode to top off the battery charge again. You will not harm the battery or MBP by leaving it plugged in most of the time.
There are many good headphone/microphone combinations on the market, best really is more a function of how much money you want to spend. Check those offered in the Apple on-line store for features/price to see what would best fit your needs. You can also look at audio equipment suppliers, all the earphones need is a standard 3.5 mm plug.

My Macbook Pro won't charge when it's on, only charges VERY slowly when it is shutdown

My Macbook Pro won't charge when it's on. It only charges VERY slowly when it is shutdown. Recently when it was charging shutdown, I could not get it to turn on. The only way it turned on was by removing the charger from the Macbook Pro. This only happene one time but still wondering what is going on with this battery.
Thanks for the help!

First see the MagSafe troubleshooting tips:Apple Portables: Troubleshooting MagSafe adapters and check to see that all looks ok. You might want to try using another charger in case the charger is faulty. If that doesn't help, take the MacBook Pro and charger to an Apple store genius bar and have the technicians test the system to see where the fault is.

My Macbook Pro is not charging eventhough the battery is 95%, Is it not working ?

My Macbook Pro is not charged even though the battery is at 95%. This is my first Macbook therefore I dont have any knowledges about it. When I replug the Adapter, only green light appeared, no matter how many tme I try. I bought it last year therefore I dont know if the battery is dead, or someting else happen to it. Last time, I need to get a new adapter because it is not charging at all. Is there anyway I can prevent it to happen? Thank you so much for helping me.

About Batteries in Modern Apple Laptops
Apple - Batteries - Notebooks
Extending the Life of Your Laptop Battery
Apple - Batteries
Determining Battery Cycle Count
Calibrating your computer's battery for best performance
MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
Battery University

Macbook Pro (Early 2011) charging problems

Hey Guys,
The Macbook Pro was bought in July of 2011 which is only a few months old .When I plug in my magsafe to charge the macbook pro it turns green, then orage to show that it is charging. However, after a few mintues of charging the orange LED light goes off and it stops charging, then the orange light comes on to charge for another few mintues then stops charging. I have been aren't to charge the macbook pro
Is the charger broken? I cant find or see anything tearing in the charging cable or anything broken with the power brick.
Thanks

First try resetting the SMC...
Reset SMC of a MacBook or MacBook Pro’s with an internal battery:
* Shutdown your MacBook/Pro
* Connect the power adapter to your Mac
* On the MacBook/Pro’s keyboard, hold down the Shift+Control+Option keys and the Power button at the same time
* Release all keys and the power button at the same time
* Boot your Mac as usual
Then try resetting the PRAM...
Resetting the PRAM
You reset the PRAM by rebooting a Mac and then immediately hold down theCommand+Option+P+R keys, you will then hear the Mac reboot sound again, signifying your PRAM has been reset. You must hit the key combination before the grey screen appears otherwise it won’t work.
If those two tricks fail, take the adapter and the laptop to the applestore. IMO it sounds like a battery issue and not a charger problem.

My macbook pro won't charge due to an electric shock

My macbook pro won't charge due to an electric shock that was caused from a charger that was in a bad condition, the computer didn't turn off when it happened but it stopped charging. When the battery died it refused to charge with any charger, I even bought 2 new ones. I sent it to apple and they are asking $650 for fixing it! The problem is that the macbook is only a year and a half old and I live abroad where there is no apple branches or any of that. I had to send it to the USA first. Also, I might lose everything saved on the macbook after fixing it! Any solutions? please help!

qhqpaliwallah wrote:
I might lose everything saved on the macbook after fixing it! Any solutions?
My computer is not working, is my personal data lost?

MacBook Pro '11 "Stops Charging" as soon as iMovie Exports Video.

MacBook Pro '11 stops charging as soon as you start exporting video from iMovie. A video demonstration in the link explains the phenomena.
http://www.youtube.com/watch?v=rnpB5G2pgMI

Respectfully, I disagree with your claim that nothing is wrong.
While I understand the behavior is by design, most users - myself included, believe that when the laptop is plugged in, it's charging and can operate indefinitely as long as it's plugged in. Instead, a Macbook will, in certain circumstances, shut down completely if under heavy load for too long. Heavy load isn't just rendering complex 3D designs or transcoding HD video - things many users will never do - but it does include activities as seemingly trivial as playing videogames or watching Netflix where playing for too long when the battery is significantly less than full exposes the user to a very possible shut down.
Just this evening, my MacBook Pro (2011) nearly died while transcoding video in Final Cut Pro - while it was plugged in. This is a real problem for a pro user on the road. Simply being plugged in is not enough when historically it has been.
Again, I understand that the MacBooks exhibit this behavior by design, but it is a design that is counter to most people's experience of electronics.
Rather than have this simply be "the way it's designed," how about Apple consider providing an option that reduces the maximum system load to a lower threshold that will allow for effectively indefinite runtimes (keeping in mind engineering concerns like heat dissipation)? I'd be willing to deal with lower clock speeds (and the resulting lengthier processing times) in certain scenarios of my choosing if it means my project won't be exposed to an unwanted shut down like it nearly did tonight. This is feedback I intend to submit to Apple after tonight's episode.
While I'm no longer concerned that something's wrong with my MacBook Pro, I don't believe the current "normal" behavior is good enough for a $2,000+ laptop for professionals.

2 week old MacBook Pro doesn't charge.

My 2 week old 13" MacBook Pro won't charge, I worked on it until my battery was completely depleted.
Now when I connect my charger it won't charge, also the LED doesn't light up.
Is my 2 week old charger broken?
(sorry for my bad English)

Call AppleCare for warranty service.

I have an Apple MacBook Pro and when surfing the web my computer will slow to a crawl and I will have a multi-colored spinning wheel visible until my latest request is handled. What is causing this and is there a way to prevent this from occuring

I have a MacBook Pro. When surfing the web it will eventually slow to a crawl. When this occurs, there will be a small multi-colored wheel spinning until my latest command is handled. What is causing this and is there a way that I can modify or prevent this from happening? Is there a setting that will prevent this?

When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.

Macbook Pro lags when charging.

Similar Messages

Maybe you are looking for