MacBook Pro Laptop doesn't recognize new internal hard drive

I have a mid-2009 MacBook Pro laptop.  Recently I started getting the flashing question mark in the file folder issue.  It could  not locate my hard drive.  I tried all the basic troubleshooting steps which did not work.  So, I then replaced the hard drive and the SATA cable.  I restarted it with my Snow Leopard installation disk, but the hard drive still will not show up in Disk Utilities or when I try to restart and am given the option to choose a different drive.  It also does not show up when I try to do an installation.  Please help!

I'd suggest double checking the new SATA cable connections just to make sure they're on correctly. If you have an external housing you can put the drive in there and see if Disk Utility sees it. That will at least verify the drive is good.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1397956818&sr=8-3&keywords=2.5+enclosure

Similar Messages

  • MacBook Pro (13-inch, Mid 2009) - Maximum internal hard drive size and speed?

    What is the maximum size of hard drive and speed for an internal hard drive to my Macbook Pro (13 inch, Mid 2009), please?
    I bought myself a Technics 1TB, 7200 rpm internal hardrive. Made a clone successfully in Super Duper.
    It fits, but It is not available for starting up my Macbook Pro. Not available in System Prefs, but visible and grey in Disc Utility.
    Although it starts up my Mac Pro just fine.. but not my Macbook Pro.
    Is there a limit of hard drive specifics?
    What is the maximum size of hard drive and speed for an internal hard drive to my Macbook Pro (13 inch, Mid 2009), please?

    Thanks for the reply
    I cloned the Technics HDD ( 2,5" HGST Travelstar 7K1000 - 1 TB : HTS721010A9E630) from the MBP.
    I tried to boot it up with my Technincs ( 2,5" HGST Travelstar 7K1000 - 1 TB : HTS721010A9E630) installed in my MBP (as my internal hard drive).

  • Won't recognize new internal hard drive; any suggesstions?

    I am a new mac user and am trying to install a 2nd hard drive (250G Western Digital SATA WD Caviar SE- 7200 RPM- 16 mb Cache/300MB's/s) and for some reason it isn't showing up when I boot up and doesn't appear in Disk Utility. Is the drive compatable? Is there something I am not doing?
    Power Mac G5   Mac OS X (10.4.6)  
    Power Mac G5   Mac OS X (10.4.6)  

    There is something else wrong if you hold down command option o f on startup and you can't boot into Open Firmware. that is the best way to clear nvram and has nothing to do with your disk drive etc as it happens much earlier and before the boot loader let alone system is present.
    The whole 'system freezing' - I always start with resetting nvram, then running extended AHT, then Memtest.
    Might want to start here:
    http://www.apple.com/support/mac101/help/
    It can help walk you (and us) through what steps...
    #1 boot into Open Firmware to Reset NVRAM
    #2 boot to your Apple Hardware Test disk using OPTION key and run tests
    #3 run Memtest 4 when possible
    - MacIntouch: Bad RAM
    #4 check cables (again)
    #5 Tiger is now out on DVD with 10.4.6 - updated and easier to upgrade
    #6 boot into Single User Mode and run after ANY freeze or hard restart
    #6 install and use Applejack
    Instructions from MacFixit:
    #7 Repair Permissions - MacFixit: Repairing Permissions demystified
    General Troubleshooting permissions
    #8 boot into Single User Mode
    #9
    #10 Backup!
    The fans are controlled by software so they will be on high for safety and precaution until the OS has begun to load.

  • How do I reboot my Macbook pro 2011 to a new internal hard drive?

    I had to get a new internal hard drive and I can't afford to pay some one to do it for me. So I was wondering how do I install the operating system on to the hard drive?
    Thanks

    Since we don't know which MBP you have or what OS was initially installed on it, try this. Start up the Mac and hold down the Command and "R" keys. If you have an internet connection and if the MBP came with Lion installed, you should be able to boot into Internet Recovery. From there, you can download Lion from Apple's servers and install it. That's assuming the new HD has already been installed and formatted (you can format it yourself using the Disk Utility that's available in Internet Recovery).

  • HT4718 I want to install a new internal hard drive for my Macbook (13in, Late 2009) and restore to factory settings. However, I want to keep my Mac OS X Snow Leopard.

    I want to install a new internal hard drive for my Macbook (13in, Late 2009) and restore to factory settings.  However, I want to keep my Mac OS X Snow Leopard., which I downloaded from the app store. How can I restore computer with the updated OS?

    What I did on our two computers was partition the hard drive so that both Snow Leopard and Mountain Lion can be used on the computers. This allowed me to be able to retain/use older applications and games on the Snow Leopard partition. This will allow you to do a clean install of Mountain Lion on the newly created partition. The Mountain Lion installer has a button that allows you to select another drive so you don't install it over Snow Leopard. I cleverly name one partition Snow Leopard and the other one Mountain Lion so I wouldn't confuse the two (I never claimed to be smart).
    To partition, you need to have sufficient free hard drive space (I suggest 50 GB minimum). Boot off the Snow Leopard DVD or the disks that came with the computer and use Disk Utility to partition your hard drive into two partitions. If you plan to make Mountain Lion your primary OS, then you can reduce the size of the Snow Leopard partition so most of the free hard drive space is available for Mountain Lion. While booted off the disk, you can install Snow Leopard on the partition you want it on.
    Restart and download Mountain Lion, remembering to select the correct partition before installing. I would make a copy of the installer and move it out of the Applications folder because the installer self destructs.
    After getting all that sorted out, I found that while booted in Mountain Lion I could access the Snow Leopard partition. That allowed me to drag files and applications from Snow Leopard to Mountain Lion. Applications that won't work with Mountain Lion will be grayed out with a slash through them.

  • How do I backup to time machine with a new internal hard drive?

    My Macbook Pro's hard drive got corrupted about a year ago so I had to get the hard drive completely replaced. However, I wanted to start backing up my data to time machine so if the same situation were to reoccur, I would be better prepared. For some reason Time Machine does not recognize the new internal hard drive of the computer as it is supposed to. Could someone please help? thank you in advanced
    Current OS: OS X 10.8.4

    That error message is saying that it is attempting to setup a Time Capsule for Time Machine to backup your data on.
    Do you have a Time Capsule?
    Do you have an external Disk Drive?
    You can do a backup to the internal disk drive. It is worthless to do that.
    Allan

  • Installing Leopard and new internal hard drive at same time, best plan?

    Ok so basically the title explains what I need to do. I am currently travelling in Europe, and returning home to New York on Tuesday night. I have a new hitachi 250gb HD and will have Leopard waiting for me at home when I arrive, and will get right to doing this installation. I am writing on the discussion boards here because I am hoping the users here can give me their opinions on what is the best plan of action to do this whole install?
    So what I was thinking was, I should remove the hard drive that's already inside, put it into an external enclosure. Then, put my new blank 250gb hard drive into the macbook pro, close up the computer, then put the Leopard OSX install disk, and do a completely fresh install of Leopard. Then, after installing (or during installing?) I should run the migration assistant program to get all my files and settings etc. transferred over to the new internal hard drive with Leopard on it, from the old hard drive that will be plugged in from an enclosure as an external drive.
    Will this plan have any problems that I am not aware of? Is there a better process for doing this task? Any advice will be greatly appreciated! I am anxious to get my new hard drive into the computer because my 160gb is filling up, and dying so badly to use the new Leopard!!

    You could also put the new disk in the external enclosure, partition it using disk utility. Then make a clone of your current hard disk to the new external one using the restore feature in disk utility. Boot from the external disk and Install Leopard as an upgrade keeping all your files and setting. check everything is all running how I should and swap drives over. That's another option for you.

  • I have a macbook pro, and i want to transfer my hard drive from my macbook, but the display drivers and such are different.  How do i do this?

    I have a macbook pro, and i want to transfer my hard drive from my macbook (500g), but the display drivers and such are different.  How do i do this and is it possible?
    The Macbook Pro has Mac OS X 10.4.11 (70g hard drive)
    The Macbook has Mac OS X 10.6.8 (500g hard drive)

    The MacBook's hard drive lacks the necessary hardware drivers to boot the MacBook Pro even though it has a much newer OS on it; that's why simply moving it into the Pro doesn't work. Presumably you have a very old MB Pro, because only the very first MB Pro model (produced January to May 2006) was ever offered with an 80GB hard drive. Are you sure you want to move your big drive into such an old machine? The MacBook must be newer, because the first MacBook was introduced just as the first Pro model was discontinued.

  • Can I reformat and partition a new internal hard drive with the Snow Leopard disk?

    I'm planning on installing a new internal hard drive in my 15'' Macbook Pro. Can I format and partition the new drive with the Snow Leopard disk or is it just an upgrade from Leopard? Thanks much.

    You should be able to do that.
    If you want to change the sizes of existing partitions this may help:
    Enlarging a partition

  • Best way to transfer data to new internal hard drive

    Hi,
    I just got a new internal hard drive for my macbook and I'm trying to figure out the best way to transfer all the data from my old hd to the new one. Basically, I would just like to make an exact copy of my old hd and put it on the new larger one. Thanks for the help.

    Will I simply be able to do a firewire transfer on the new internal HD is installed
    Yes. Use Carbon Copy Cloner with the sopurce and destination volumes reversed after installing the new drive.
    Additionally do I need a bootable copy of OSX on my external HD to do the transfer?
    Yes; the clone can act as this copy. If you copy everything with Carbon Copy Cloner, you will be told whether the drive will be bootable or not prior to the clone.
    (33676)

  • New internal hard drives, seems slow with Logic 8, how can i test

    Hi,
    I just bought a new internal hard drive, but it seems subtley too slow!,
    On a Logic 8 song i'm working on the tracks timing seems slightly off, it's kind of driving me crazy because at times it is subtle, and other times obvious.
    and 2 other things, one is an iTunes playback stalled twice, and that's never happened before,
    also, when working on a Word doc, the screen was not re-drawing properly. i had to repeatedly reisze the doc window to get it re-draw itself. this has never happened before either.
    is there a way to test this new hard drive?,
    thanks

    There are though all the ones I've used, TechTool Pro, Disk Utility, Intech Speedtools, none were 'perfect' or as good as the vendor's own utility which runs on Windows.
    But you might do something for us - include the drive make/model version, and, do a look up with Google and see if you get any helpful hits.
    How you have your system setup, number of drives and organization of files, can also have an impact.
    Off hand, WD Caviar 640GB is cheap and fast, or there are some 1TB drives that look good, too.
    Drives do break in over a period of days or first week, and it can help to break in and torture, zero the entire drive, run media scan, use a benchmark utility to graph I/O over the full drive.
    Check out Barefeats, they do a bit of drive testing benchnmarks and see what they use and results. Or Tom's Hardware.

  • After I installed Lion, my MacBook Pro can no longer detect my external hard drives or my USB flash drives. What should I do?

    After I installed Lion, my MacBook Pro can no longer detect my external hard drives or my USB flash drives. What should I do?

    And me -- My Mac at work running Snow Leopard reads the drive normally. My home Mac (on Lion) can't even find it....
    Yet another Leo let-down.....

  • My MacBook Pro no longer "sees" my LACie external hard drive

    Hello,
    I need you help with this one. My MacBook Pro no longer "sees" my LACie external hard drive. In the System Profiler (under FireWire) the drive is listed as:
    FireWire Bus:
    Maximum Speed: Up to 800 Mb/sec
    Unknown Device:
    Manufacturer: Unknown
    Model: Unknown
    Maximum Speed: Up to 800 Mb/sec
    Connection Speed: Unknown
    Can anyone help me to correct this issue? Thank you in advance for your help!!
    Nat

    I was finally able to resolve this issue. I went to LaCie's site and went to the support area to find troubleshooting steps for my particular drive. It turns out that the problem was corrected when I swapped the power supply cord of the "troubled" drive with another LaCie drive that I have and that seemed to resolve the problem. Thank you Tony for your help. I appreciate you guys!
    Thanks,
    Nat

  • Importing FROM external hard drive to new internal hard drive

    How can I move my backed up Itunes library from my external hard drive to my new internal hard drive? I went through the steps listed on the support page, and imported the .xml playlist that I moved to the desktop. Now all my playlists (names only) are on Itunes, but there is no content. Help?

    lksj wrote:
    How can I move my backed up Itunes library from my external hard drive to my new internal hard drive? I went through the steps listed on the support page, and imported the .xml playlist that I moved to the desktop. Now all my playlists (names only) are on Itunes, but there is no content. Help?
    assuming you moved the whole iTunes folder to your new internal HD, try this:
    launch iTunes with the options key pressed. this window will appear
    click +choose library+ and navigate to the _iTunes library file_ on your internal HD.
    any luck ?

  • How do I transfer all data from my old internal hard drive to a new internal hard drive

    How do I transfer all data from my old internal hard drive to a new internal hard drive? I have an iMac with a 320gb internal HD that is full and I am replacing it with a 2tb internal drive. I have several external drives; 1 tb, 2tb and 3 tb. The 2 tb is being used for Time Machine. Do I have to buy an enclosure? If so, where would I get an inexpensive one?
    I also want to partition the new internal drive for Windows, and I'm not sure how much space to use for that. I plan to use Windows to check my work in PowerPoint created on my Mac for clients on PCs.

    Do you already have Time Machine making backups onto the 2TB drive? If so, after you get the internal drive replaced, boot up into the recovery partition (hold down ⌘R) and restore the latest Time Machine backup that you have onto the new internal drive.
    I recommend always having two backups. I'd use SuperDuper to make a complete clone of your internal drive onto an external drive in addition to having the Time Machine backup.
    Boot Camp is what is used to make partitions for Windows. How much space to allocate depends on how much space you expect Windows to use up based on how you plan to use it.

Maybe you are looking for