Macbook Pro (late 2008) memory upgrade problem

Hi,
I have an Macbook Pro (late 2008) 15'' 2.53GHz, 4GB DDR3, GeForce 9400m/9600M GT
4GB ram are by default. I tried to upgrade ram to 8GB, but my MBP doesn't recognize more than 4GB.
At Apple website I found information that maximum supported RAM memory is 4GB (which means that I cannot upgrade my MBP with 8GB of RAM), what isn't ok because it is a Pro machine. Are there some chipset drivers upgrade or BIOS firmware upgrade to let notebook to be able to has 8GB?

At Apple website I found information that maximum supported RAM memory is 4GB...
Yes, and that same information appeared in the specifications for your machine when you decided to buy it, and also in the owner's manual that came with it. So it's not a surprise — or at least it shouldn't be.
In spite of that information, and without support from Apple, you can put 6GB of RAM into it in the form of one 2GB and one 4GB module.

Similar Messages

  • Macbook Pro late 2008 Memory upgrade Issue

    Dear Gurus,
        I have a late 2008 15" Macbook Pro 2.4 Ghz  with 2 GB 1066 MHz DDR3 installed, I just brought a pair of corsair (2*4GB) DDR3 (CMSO4GX3M2A1333C9) memory upgrade and installed it in my macbook pro. I'm running OS-X Lion 10.7.1 before the upgrade now in About This Mac menu show that I have 8 GB 1333 MHz DDR3 and everything seem to be ok only when I shutdown and power up again the boot time seem to take longer than it is with previous 2GB memory module installed, it took almost 2 minutes from the power button pushed untill my macbook display the login screen. Question: Is the Ram upgrade is OK or I need to return the Ram and get the 1066 Mhz to replace my 2 Gb Ram. How can my mac report that I have 8GB 1333 MHz DDR3 Ram while the system only at 1066 Mhz bus
    Best regards,

    RAM will clock back to match the system bus as long as it's otherwise compatible. Reporting utilities tend to read the RAMs design speed.
    It it works, ignore it.
    As for this part of your question:
    only when I shutdown and power up again the boot time seem to take longer than it is with previous 2GB memory module installed, it took almost 2 minutes from the power button pushed untill my macbook display the login screen.
    that's normal. The OS does a "power-in self test" or "POST" at startup that includes RAM checking. The more RAM installed, the longer the test takes. You quadrupled you RAM, so the increase in start time does not surprise me.

  • Macbook pro late 2008 hardware upgrade

    Hi,
    I’m planning to do upgrade my macbook pro late 2008 (2.66 GHz Intel Core 2 Duo 4 GB DDR3 1067 MHz / NVIDIA GeForce 9400M / 320.07 GB Hitachi and Superdrive).
    I would like to:
    Upgrade memory from 4 to 8 GB via e.g. two PC3-8500 4GB RAM Chip iFixit https://www.ifixit.com/Store/Mac/PC3-8500-4-GB-RAM-Chip/IF111-036-1
    Replace the Superdrive by either e.g. :
    SSD 256 GB Solid State Drive
    https://www.ifixit.com/Store/Mac/256-GB-Solid-State-Drive/IF107-124-2
    or SSD or 512 GB
    https://www.ifixit.com/Store/Mac/512-GB-Solid-State-Drive/IF107-125-2
    or OWC DIY Bundle: OWC Data Doubler Kit + 6G 480GB OWC SSD - http://eshop.macsales.com/item/OWC/DDMBS6E480/
    And use the Superdrive externally via a case
    http://www.macway.com/fr/searches?keywords=Storeva+slim+burner&aff_i=25904&t_edi t=affinitaire_high_tech&aff_v=&aff_a=
    Do you think the investment is worthwhile and if so are there according to your experience better solutions. (faster SSD, faster memory ram or kits specially designed).
    What would be better to replace the SuperDrive by the SSD or to replace the HD by the SSD and the SuperDrive by the HD.
    I have read that on many of the 2008/9 MacBook Pro models, if you put a SATA III drive in it will slow down to 1.5Gb/s. Can you confirm my 2008 can't take advantage of the very fastest SSDs and that it’s better to use a SATA II drive (like the OWC Electra 3G).  
    Thank you for your help.

    Hi again OGELTHORPE,
    You're right my MBP is a 5.1 model.
    Thank you, I take good note for the memory.
    If I understand correctly your answer, there will be no performance difference if I put the SSD in place of the SuperDrive or of the HD.
    Yes I understand your opinion for the cost of SSD. But I am writing from Europe (Belgium) and here MBP are more expensive (+/- 18%) than in your beautiful country. And as I mostly use my Mac for photo editing and surfing I think the memory and SSD will give him a new youth.
    If someone has already added an SSD to a 5.1 model I'm interested in any information about the SSD model and where he installed it.
    Thanks.

  • Instaling ML on Macbook pro late 2008 from dmg problem

    Hello all
    a friend of mine has a macbook pro late 2008 with snow leopard installed.
    He wanted me to clean install the machine and install ML on it
    i checked the requirements and i saw that this is possible
    went on my mac mini and restored the image file to a usb stick and holding option key while booting i started the process
    first erased the hard drive and then  back to main screen press install ML
    the next screen after confirming that i agree  the dialog box was reading tyhe instalation files..it went throughh till the last bit and then just stuck there!
    left it almost all night and nothing happened
    Any ideaw on how to proceed?
    Maybe the installation image that i have used is only for my mac mini and that is the reason that this happens?
    a possible solution is to install snow leopard again and inform him to buy the software so as to be machoine specific from the mac app store?
    Any help will be much appreciated
    Many thanks

    Your friend has to purchase OS X Mountain Lion with his/her Apple ID. If you install OS X Mountain Lion without having purchased it with his/her Apple ID, he/she won't be able to reinstall OS X Mountain Lion if it gets damaged, so this is dangerous.
    He/She must purchase OS X Mountain Lion, so he just have to open  > Software Update and install all available updates. Then, open App Store and purchase OS X Mountain Lion, so it will be downloaded into his/her MacBook and the Mountain Lion installer will show up when the download finishes, so just follow the steps to upgrade to OS X Mountain Lion.
    He/She should make a backup of his/her files with Time Machine or Carbon Copy Cloner before upgrading, and also, check if the applications are compatible > http://www.roaringapps.com
    The OS X Mountain Lion version used is the same for all Macs (except the 13-inch MacBook Pro with Retina display, and the Late 2012 Mac mini and iMac because of driver problems), so this is not a problem

  • MacBook Pro late 2008 hard drive problems

    I've got a 2.4Ghz 15" MacBook Pro (model MB470LL/A). I've been having so many problems with upgrading the hard drive that I'm at my wits end. First, I swapped out the stock 250gb hd for a Western Digital Scorpio Blue 500gb. Only later did I find out a lot of people are having problems with it. My problem was slightly different...it would work fine for random periods of time, sometimes hours. Then the system would seemingly freeze (even iTunes stopped playing and the menu bar clock stopped running), then after maybe 15 seconds or so, it'd start up again. This started driving me nuts when it became more frequent. I tried all the different fixes from various message boards, to no avail. I even tried reinstalling OS X. No change.
    So I threw that in an external enclosure (where it's been working fine since) and bought a Samsung Spinpoint M7E HM501II instead. The system seemed to crash more often, so I ran a disk scan (Drive Genius 3) on it. The scan kept either choking at a certain point and/or kicked up bad block errors like crazy. HOWEVER, when I put the Samsung in an external enclosure and ran the disk scan again, it finished without an error. I can replicate this at will.
    I took it in to the local Genius Bar, where they ran more tests and determined it was a bad drive. I RMA'd it and got a new one. Same problem with the scans. And again, it runs and scans perfectly fine in the external enclosure.
    So now I'm at a loss. I don't want to keep wasting money buying different branded hard drives. Is there some strange problem with my MacBook Pro? I'm thinking there some sort of weird problem with the drive controller or something, and I tried to get the Genius Bar to test that. They claimed they did and found no problem. Do I live with my 250gb drive (I'm only looking to get a bigger drive, not something faster. I need the battery life) or is there anything else I can do?

    Lately there have been quite a few debates on the hard replacement issues with MBP's and from what I have seen they mostly are around the power consumption of the drives being not compatible..
    So it's been many days now I'm recommending people this drive :
    http://www.amazon.com/Western-Digital-2-5-Inch-Internal-WD5000BEKT/dp/B003TOE4PQ
    It's one of the least power hungry drives on the market and is one of the highest performers as well.
    It's 7200 rpm and a whopping 500GB for 70-80 dollars is quite interesting .
    if you buy the drive and hesitate to replace don't worry it's a 5 minute super easy task and you will find plenty of help if you report back here
    I hope I could be of help

  • Trackpad non responding for wake up on macbook pro late 2008

    i mentioned a problem with my macbook pro late 2008 since upgrading to 10.8. while clicking the trackpad to wake up my macbook air 2011 everything works fine, but on my macbook pro late 2008 it wouldn't. i have to click either the spacebar or any other key on the keyboard. otherwise no issues with the trackpad. is there anything different to the air, is there a fix or is it just normal. thanks for replies. greez.

    Yes. That wouldn't hurt. I do have a couple of other suggestions:
    1 - create a new test library, import a few photos and see if the import succeeds. If it does then the problem is with the original library.
    2 - if the test import crashes log into another account on your Mac, create a test library if there isn't a library there, and see if you can import. If you can't then a reinstall of iPhoto would be the next step.To do so you'll have to delete the current application and all files with "iPhoto" in the file name that reside in the HD/Library/Receipts folder. Reinstall iPhoto from the disks it came on and apply the latest updates.
    3 - if you can import successfully in the second account your primary account is the culprit. It could be a preference file other than iPhoto's that's causing the problem. Here's how to determine if that's the case.
    Trouble Shooting Preferences in Leopard
    1 - Create a folder titled "Preferences A" on the Desktop.
    2 - Open the working Preferences folder, HD/Users/your_name/Library/Preferences, and move the contents to the Preferences A folder on the Desktop.
    3 - Make a duplicate copy of the Preferences A folder on the Desktop as a precautionary backup.
    4 - With the working Preferences folder empty run the application again and determine if the problems is fixed.
    NOTE: you may have to drag the contents of the working folder to the trash and empty if moving the contents to the A folder only copies them instead of moving.
    5 - If the problem is fixed:
    A - open the working Preferences folder (HD/Users/your_name/Library/Preferences).
    B - Open the Preferences A folder on the Desktop, select all of the contents and drag them into the working Preferences folder.
    C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace button as seen here.
    6 - If the problem is NOT fixed, empty the working Preferencess folder and move the contents of the Preferences folder on the desktop back into it.
    OT

  • Internal HD upgrade or external HD for my Macbook Pro (Late 2008)

    Hello,
    I am finding the 250gb internal hard drive not enough and want to upgrade to a 500gb/1tb hard drive for my macbook pro (late 2008 edition).
    What I am wondering is whether to change the internal hard drive OR buy the fastest possible external hard drive for my mac which I believe is one that works with firewire 800 as my late 2008 macbook pro does not come with USB 3.0.
    The external hard drive I have found is £110 and my macbook would be using the Firewire 800 connection:
    LaCie Rugged Triple 301984 1TB USB 3.0 and Firewire 800 5400 rpm Portable Hard Disk Drive
    http://www.amazon.co.uk/Rugged-Triple-301984-Firewire-Portable/dp/B005C2BNJI
    I dont necessarily need the portability of a external hard drive. I work with large files (photoshop, illustrator files mainly) and would would be concerned that I would not be able to work directly on the hard drive for this type of work so an internal hard drive may be better/
    Can anyone suggest a good, fast, cheap, popular internal hard drive compatible with my computer and whether you would suggest changing the internal HD or buying an external.
    I am running Mavericks and the only other change I have made is by upgrading my RAM from 4gb to 8gb. Thanks so much for your help
    Hardware Overview:
      Model Name: MacBook Pro
      Model Identifier: MacBookPro5,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2.4 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache: 3 MB
      Memory: 8 GB
      Bus Speed: 1.07 GHz
      Boot ROM Version: MBP51.007E.B06
      SMC Version (system): 1.33f8
      Serial Number (system): W8******1G0
      Hardware UUID: *****
      Sudden Motion Sensor:
      State: Enabled
    <Edited By Host>

    For both convenience and speed, I'd recommend replacing the internal hard drive.  Your MacBook Pro can handle nearly any internal SATA 2.5" HD on the market, including 7200rpm models. For what it's worth, I'd recommend a Western Digital Black WD7500BPKX or similar or Hitachi HGST 7K1000 although in my experience Hitachi drives run hot and that's the reason I don't use them as internal drives.
    FW800 is fine, but then you have an external hard drive to lug around plus the connection is considerably slower than the internal SATA connection used by the internal hard drive.
    Note that you will have to either 1) clone your existing drive to the new drive or 2) completely reinstall OSX and all your apps from scratch to the new drive when you replace the internal drive.   If it were me, I'd take the opportunity to reinstall everything from scratch.
    btw, I have done this myself on a number of 2008/2009 MacBook Pros and it's not hard at all.  iFixit has tutorials on how to do this.  (Here is a link to the one that I believe is your model.

  • Macbook Pro (late) 2008 won't recognize HD and MAC OS X installed, but recognizes SAME HDD with Windows installed ... where is the problem !???D a

    Macbook Pro (late) 2008 won't recognize HDD and MAC OS X installed, but recognizes SAME HDD with Windows installed ... where is the problem !???
    And HDD is APPLE certified ( 250 GB )

    Hello JashaCOLD,
    Thank you for the details of the issue you are experiencing with your external hard drive.  I found an article with steps you can take when an external device is not being recognized.
    I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Macbook pro late 2008 battery problem

    I have a macbook pro late 2008 and I've been experiencing problems with the battery. I have changed the battery two times till now and now it's telling me to service battery. I am not a heavy user and I always try to drain the battery twice a month. Can it be the power supply?
    I need help

    Hi there,
    I seem to have the same problem. My battery indicator gives me no more than 2 1/2 hours of battery life.
    I checked to see if my computer was set to better battery performance and it was.
    Now initially I thought that this may because of my external display (ACD 23") and my LaCie rugged external HD, which takes power from the FW connector. But even when I disconnect both of them I still only get two and a half hours of battery life, even when I leave the computer alone to just sit there.
    Now I'm guessing this isn't normal. It may take an software update to correct this. But if this doesn't get corrected this thing is useless to me. And I will no doubt return it.

  • I have a MacBook Pro late 2008 edition with 2 Gigs of RAM and running Mavericks. When trying to download Yosemite from the App Store it gives me an error message. Anyone has a similar problem?

    MacBook Pro late 2008 edition with 2 Gigs of RAM and running Mavericks (10.9.5). It gives me an error message when I try to download Yosemite

    All,
    I thought it may be related to spaces in the path in which the script was called from. I tried having the ODBC command script in another directory but the same thing happens. It will give me the "CONFIGSYSDSN: Unable to create a data source for the 'Oracle in OraClient10g_home1' driver: Could not load the setup or translator library with error code -2147467259". As soon as the script is done running I can manually double click the script and it adds the DSN fine.
    Thanks,
    Clif Bridegum

  • MacBook Pro Late 2008 (Unibody) doesn't boot

    Hello,
    my good old MacBook Pro Late 2008 running Mountain Lion won't boot anymore. The sleep light does not light on, the green battery status indicator light is showing that the battery is full. I had this problem two or three times, and usually my Macbook comes magically back to life after one or two days.
    At the Apple store they said I'd have to make a SMC reset, and when they did it in the store, it worked. But it doesn't work for me (and I am sure I am doing the same thing, so maybe the Apple guy was just lucky – or is there another special trick?). What could be the solution to my problem?
    Unfortunately, I can't really tell the exact specifications, but it is the standard model, and I didn't change anything since. I just had the problem that it was getting really hot like half a year ago, but then I cleaned the fans and since then it was running rather fine (just sometimes froze).
    Any help greatly appreciated!
    Julian

    I've got the same, or almost the same problem on a MBP 2008 (late).
    MBP 15.4/2.53/2X2GB/320/SD/512VRAM upgraded to 8 GB 1067 DDR3 (OWC memory)
    In my case the computer works fine when I'm able to get it on. If it is turned off and the MagSafe charger disconnected then left that way for a few hours, and the MagSafe is re-connected, let it charge for a bit, it can often be turned on via the power button. HOWEVER, .....
    If it is left OFF overnight (Apple > Shut Down .... ), and the backlit keyboard goes dark, then a little pause before closing the lid, and left overnight, it will usually not be able to be turned on. The battery is in reasonably good condition (~+3500 mAh) and the newer battery (~ guess +5000 or more mAh) it doesn't do any better, and it won't turn on. Cycle count 183.
    Take the battery out, (disconnect the MagSafe first! Never have the MagSafe charging without a batter in the computer) wait half a minute, reinstall battery (I like the 5,1 because the back section can be easily removed to access the battery and the hard drive), attach the MagSafe charger then wait a bit (few minutes), and the computer can often be turned on the first time. If not the first time then repeat the process. Tried hitting the Power button with the battery off but that doesn't seem to change anything.
    Erased the HD (Hard Drive) and reinstalled Yosemite, have Fire Vault turned off, did a Utilities (Cmd + r ) check of the hardware (no problems), also did a few other tests - no problems. PRAM reset. Investigated BONJOUR - haven't gone into the Terminal yet. Would be nice to disable Bonjour without disabling DNS. https://www.apple.com/support/bonjour/ and http://apple.stackexchange.com/questions/151485/how-do-i-disable-bonjour-visibil ity-after-yosemite-install and http://forums.obdev.com/viewtopic.php?f=1&t=6106
    The Genius Bar tested it and couldn't find a problem. Suggested the Logic Board be replaced and that i$ expen$ive! I've investigated having the Logic Board repaired and that would cost around $150 + shipping. Won't do the oven trick. Other problem sources I've come across is the graphics chip (mainly on the 2008 (early) MBPs.
    Since erasing and reinstalling OS X Yosemite the computer really screams but I've started to reinstall some of the applications (FCPX & Motion), Documents, and Movie files. Still screams though! Nothing like a real cleaning of the hard drive. Didn't do a Time Capsule-type backup because I wanted to minimize "junk". The CanoScan LiDE 90 scanner won't work because Canon won't come up with a driver to work with Yosemite. Won't buy a Canon scanner again and didn't want to buy it to begin with due to a previous Canon problem. Bought a new Canon camcorder, $1,600 + tax, back when they had mini-tapes, it at the Maxwell tape but just outside the warranty period and wanted something around $500 to fix it. Turned out that was a typical problem.
    Really running out of options and ideas at this point. Hate to send it off to repair the Logic Board. Still looking for a software or setting fix.

  • Random hard freezing issues, Windows 8 64-bit on Macbook Pro (Late 2008)

    Hi,
    I recently upgraded to OS X 10.8.3 and got a hold on copy of Windows 8 64-bit. As I'm running on my old trustworthy 15 inch Macbook Pro (Late 2008), my hardware is officially unsupported. Over the years I've had XP, Vista, Win7 32-bit and 64-bit running running on the same machine, and thought I'd give Win8 a chance.
    To be able to install Win8 on my unsupported hardware, I tricked the Bootcamp assistant that I was going to install Win7, and after the reboot and start of the Win7 installation, I exited the installer, rebooted, switched DVD to Win8 and did the installation from there. So far so good. For installing the Bootcamp drivers, I followed the instructions in https://discussions.apple.com/thread/4894920?tstart=90.
    Now, the machine runs just fine with Windows 8, and I've installed some basic third party applications (Firefox, Spotify, Steam). However, I get completely random hard freezes on the machine (sound looping, no other activity whatsoever) during normal use. These can occur 20 minutes after start, or 3-4 hours in. The freezing behavior is very much similar to how my model can behave under overheating conditions (which mostly have occured in past Windows versions while gaming), however overheating doesn't seem to be the issue here (based on simple palpation ).
    Have anyone experienced a similar problem, or know something about it? My current idea is that some weird things are going on with the Bootcamp drivers, so unless anyone comes up with a suggestion I might try doing a rollback to the point before I installed the drivers to see what I can make of it.
    Thanks!

    Had a few similar short system freezes, after installing Windows 8 x64 on 13” MacBook Pro Mid-2010 with BootCamp 5.0.5033.
    There is a suggestion that DisableDynamicTick may fix the problem: https://discussions.apple.com/message/21565295#21565295. There were similar topics at Microsoft forums: 1, 2, 3. It was said “that this will likely reduce system battery life, so it should be undone when you update your Windows build or if it doesn't resolve your issue”, and that “this problem is resolved in the release versions of Windows 8”.
    Another possibility is that there is indeed a buggy driver, within BootCamp 5.0.5033, or a 3rd party, like a wireless network driver in the following case http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/system-fr eeze-randomly-after-installing-windows-8/49488183-26cf-4389-af21-a85dc366c99a?pa ge=2#LastReply.
    The problem has been noticeable on my MacBook, but not annoying enough yet to spend time troubleshooting. If you find a robust solution, using the links above or other method, it would be interesting to know.
    HTH

  • Macbook Pro late 2008 with Mavericks gets Grey screen of death.

    Hey guys..
    When Mavericks was released, I updated my old Macbook Pro (late 2008) 2.8ghz on work, and since then I have had a couple of Grey Screen of Deaths.
    I had none of those before Mavericks, so I guess thats the source of the problem.
    I've been trying to figure out what might cause it, from the crash log below, but I can't seem to figure anything from it, so I was hoping you guys could help me?
    Correct me if I'm wrong, but it seems to be a kernel panic, caused by some PowerManagement from kernel_task. But how do one fix that?
    Anonymous UUID:       E9D5B1C8-5DAD-BA79-D217-03BABC2E9B4C
    Wed Oct 30 12:06:40 2013
    panic(cpu 1 caller 0xffffff8011cdc19e): Kernel trap at 0xffffff7f93be996c, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0xffffef7f93c0f9b8, CR3: 0x0000000014a0a000, CR4: 0x0000000000000660
    RAX: 0x0ffffffb97da0000, RBX: 0xffffef7f93c0f9b0, RCX: 0x0000000000000001, RDX: 0x000000468263fc7f
    RSP: 0xffffff80f3a93d80, RBP: 0xffffff80f3a93e70, RSI: 0x0000006682634051, RDI: 0xffffff80f3afd148
    R8:  0x00000000e0000000, R9:  0x0000000000000005, R10: 0x000000000000081e, R11: 0xffffff8012289ce8
    R12: 0xffffff8024296800, R13: 0x0000000000000005, R14: 0xffffff80f3afd148, R15: 0xffffff7f93c0de20
    RFL: 0x0000000000010006, RIP: 0xffffff7f93be996c, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0xffffef7f93c0f9b8, Error code: 0x0000000000000002, Fault CPU: 0x1
    Backtrace (CPU 1), Frame : Return Address
    0xffffff80f3a93a10 : 0xffffff8011c22f69
    0xffffff80f3a93a90 : 0xffffff8011cdc19e
    0xffffff80f3a93c60 : 0xffffff8011cf3606
    0xffffff80f3a93c80 : 0xffffff7f93be996c
    0xffffff80f3a93e70 : 0xffffff7f93be8b89
    0xffffff80f3a93f30 : 0xffffff8011cdda5c
    0xffffff80f3a93f50 : 0xffffff8011c3757a
    0xffffff80f3a93f90 : 0xffffff8011c378c8
    0xffffff80f3a93fb0 : 0xffffff8011cd6aa7
          Kernel Extensions in backtrace:
             com.apple.driver.AppleIntelCPUPowerManagement(216.0)[A6EE4D7B-228E-3A3C-95BA-10 ED6F331236]@0xffffff7f93be6000->0xffffff7f93c10fff
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13A603
    Kernel version:
    Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
    Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
    Kernel slide:     0x0000000011a00000
    Kernel text base: 0xffffff8011c00000
    System model name: MacBookPro5,1 (Mac-F42D86C8)
    System uptime in nanoseconds: 19122757284543
    last loaded kext at 18516227224656: com.apple.driver.AppleUSBAudio          2.9.3f17 (addr 0xffffff7f94013000, size 303104)
    last unloaded kext at 18583595087255: com.apple.iokit.IOUSBMassStorageClass          3.6.0 (addr 0xffffff7f93fea000, size 69632)
    loaded kexts:
    com.cisco.kext.acsock          1.1.0
    com.apple.nke.rvi          2.0.0
    com.apple.filesystems.smbfs          2.0.0
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AGPM          100.14.11
    com.apple.filesystems.autofs          3.0
    com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleMikeyHIDDriver          124
    com.apple.driver.AppleHDA          2.5.2fc2
    com.apple.driver.AppleMikeyDriver          2.5.2fc2
    com.apple.driver.AppleSMCLMU          2.0.4d1
    com.apple.driver.AppleMuxControl          3.4.12
    com.apple.GeForceTesla          8.1.8
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleHWAccess          1
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleLPC          1.7.0
    com.apple.driver.SMCMotionSensor          3.0.4d1
    com.apple.driver.AppleUSBTCButtons          240.2
    com.apple.driver.AppleUSBTCKeyboard          240.2
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.driver.AppleIRController          325.7
    com.apple.iokit.SCSITaskUserClient          3.6.0
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.4.0
    com.apple.nvenet          2.0.21
    com.apple.driver.AppleUSBHub          650.4.4
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.driver.AirPort.Brcm4331          700.20.22
    com.apple.driver.AppleAHCIPort          2.9.5
    com.apple.driver.AppleUSBEHCI          650.4.1
    com.apple.driver.AppleUSBOHCI          650.4.1
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleSMBIOS          2.0
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
    com.apple.driver.AppleUSBAudio          2.9.3f17
    com.apple.AppleGraphicsDeviceControl          3.4.12
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.driver.DspFuncLib          2.5.2fc2
    com.apple.vecLib.kext          1.0.0
    com.apple.driver.AppleHDAController          2.5.2fc2
    com.apple.iokit.IOHDAFamily          2.5.2fc2
    com.apple.driver.AppleGraphicsControl          3.4.12
    com.apple.driver.AppleSMBusPCI          1.0.12d1
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.nvidia.classic.NVDANV50HalTesla          8.1.8
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.nvidia.classic.NVDAResmanTesla          8.1.8
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.iokit.IOAudioFamily          1.9.4fc11
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.iokit.IOSurface          91
    com.apple.iokit.IOBluetoothFamily          4.2.0f6
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.5.1d27
    com.apple.iokit.IONDRVSupport          2.3.6
    com.apple.iokit.IOGraphicsFamily          2.3.6
    com.apple.driver.AppleSMC          3.1.6d1
    com.apple.driver.AppleUSBMultitouch          240.6
    com.apple.iokit.IOUSBHIDDriver          650.4.4
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.driver.AppleUSBComposite          650.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.6.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
    com.apple.iokit.IOUSBUserClient          650.4.4
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IO80211Family          600.34
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.iokit.IOAHCIFamily          2.6.0
    com.apple.iokit.IOUSBFamily          650.4.4
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.driver.NVSMU          2.2.9
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.10
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          21
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.8
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.pthread          1
    com.apple.kec.corecrypto          1.0
    Model: MacBookPro5,1, BootROM MBP51.007E.B06, 2 processors, Intel Core 2 Duo, 2.8 GHz, 8 GB, SMC 1.33f8
    Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
    Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
    Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.0f6 12982, 3 services, 15 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: Hitachi HTS723232L9SA62, 320.07 GB
    Serial ATA Device: MATSHITADVD-R   UJ-868
    USB Device: Built-in iSight
    USB Device: Logitech USB Headset
    USB Device: BRCM2046 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Apple Internal Keyboard / Trackpad
    USB Device: IR Receiver
    Thunderbolt Bus:

    I am  having similair issues :  MBP 4.1  2008 
    It does not want to reboot at all .
    Stops with the grey screen .Spinning wheel / gear stops spinning  and Mac reboots automaticly to.... get stuck again .
    Ive tried the recovery : No automatic reboot  But same screen : ( grey , stuck stopped spinning wheel)   some how it enters Disk Utility  because I can trigger the voice that ask for the language etc.  (I left it there overnight  without result )  I dont see DU on screen  ( tried second monitor : No luck )
    Did a hardware test : No issues
    Did single user logon  :   fsck   : No problems with the drive ( after 2 runs ) ( 1st runs : changes were made )
    Did Logon Verbose status :  Initial messages :  shutdown reasons : code 128 ...   now followed by code 3
    Tried to reinstall the original OSX ( 2008 )   No luck : grey screen changes to darker screen coming in from the top asking to reboot the system .
    1st real bad signal was : When donwloading Maverick ( again )  to create a bootable USB  the screen started flickering ( this started when pressing the download button ???  - I had to reboot the mac to stop
    2 days later :
    Last Live activity with this mac was : Trying to create maverick Bootable  USB  using diskmaker X )   During this activty the mac died on me .
    I have a full time machine backup : so no worries about data...I hope  )
    This mac is one of the lucky ones with the bad NVDIA 8600m gt cards ... after upgrarding in march 2013 to Lion ..it crashed on me with the black screen of death ...Since apple stopped the guarantee I baked it in the oven at 200 c for 7 minutes  . For the last  months it was working Fine  .   ( Hardware check shows no issues  - and upon reboot it chimes happy ..)
    What could be my next options ?  ( Obvious buying a new one ... This  is allready launched as an idea .   I need more creative thoughts :-)

  • Macbook pro late 2008 13 inch won't run 8 gb ram

    Hello, I have a question that has been bothering me for a while now.
    I bought a 4gb Ram Module at best buy, it is 1066GhZ DDR3 SODIM.H from PNY to upgrade my macbook pro to 8gb of RAM, everything was going well, I got home and opened up my macbook, inserted the module and turned on my mac.
    Everything started working fine until I tried to open google chrome, my machine went into a kernel panic and restarted itself.
    Being as I am, I decided to wipe my machine and re-install mountain lion (I run it because mavericks slows down my computer) but my machine wouldn't let me install it.
    I opened my computer up again, re-installed the 1gb module from the fabric and the computer worked well.
    Now, my question is this: Isn't my computer able to run 8 gb in RAM? I already upgraded my firmware and read a bunch about it on the internet and have done everything necessary but my computer won't accept the module!!
    I really would like to know what is going on :/
    My specs:
    Macbook pro late 2008 unibody
    Version 10.8.5
    H2.4 GHZ Intel core 2 duo processor
    5 gb 1067 MHz DDR3 memory
    Model Identifier: MacBook5,1
    Boot ROM Version: MB51.007D.B03

    According to http://mactracker.ca database (free download) the MacBook Pro
    13-inch model identifier5.1 you've stated that you have, is Not as you've said.
    However, there was a 15-inch with the 5.1 model identifier.
    •How to identify MacBook Pro models
    Be sure to correctly identify the MacBook Pro model, and then get high quality
    RAM of proper specification of known good brand for Apple portables.
    Find an Example of correct spec RAM, by model & identifier; display size, build year:
    http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade
    The budget name brands seldom work well in Apple products; they do OK in some
    models of old computers or loose-spec PCs. OWC/macsales and crucial.com are
    two better known reputable suppliers of upgrade parts for Macs. Be sure to match
    the correct part to the exact spec for your computer.
    •How to identify MacBook models
    •The MacBook 13-inch (Aluminum Late 2008) -- is not a MacBook Pro:
    Model Identifier    MacBook5,1
    Model Number    A1278
    EMC    2254
    As such the RAM spec according to MacTracker is as follows:
    Maximum Memory    8.0 GB (Actual) 4.0 GB (Apple)
    Memory Slots    2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM
    OWC site points to this page for RAM. Double check detailed specs:
    http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3
    Good luck & happy computing!
    edited 2x

  • Flashing Question mark: New hard drive not working Macbook Pro late 2008

    After following several peoples advice on this forum I decided to upgrade my Macbook Pro late 2008 with a Seagate (1TB) Solid State Hybrid Drive 2.5 inch.
    Heres the device.
    http://www.morecomputers.com/spec.aspx?pn=ST1000LM014
    After creating a mountable boot on a External hard drive with Mavericks install I removed the current hard drive and replaced with the new seagate drive. However it didn't seem to recognize the external hard drive (it is quite old but works perfectly) and went to a flashing grey question mark screen and wouldnt do anything else. Ive tried holding down command-r and option-r but I get nothing. Its just the same flashing question mark. I have done this several times and the same result.
    I put the old drive back in and it works fine.
    I am trying to work out is the problem with the mountable external hard drive OR is it the hard drive is not compatible with my computer?
    Appreciate your help
    Gary

    Sorry I think you may be confused.
    I am trying to install the new Seagate hard drive to my mac (not as an external hard drive).
    I replace the macbook pro hard drive with the seagate drive:
    http://www.morecomputers.com/spec.aspx?pn=ST1000LM014
    I then started up the machine with a usb external hard drive with a boot copy of mavericks on it. However, it just displayed a flashing question mark and wouldnt start booting the osx.
    I am trying to work out is the problem with the mountable external hard drive OR is it the hard drive is not compatible with my computer? Im guessing it must be hard drive. Would it be better to use a USB pen drive as the external hard drive is quite old?
    Does anyone know what the problem could be as the hard drive is brand new.
    Appreciate your help
    Thanks, Gary

Maybe you are looking for