Macbook Pro Late 2008 not recognizing battery and not charging

Hello
i really need some help please
i have a Macbook pro 15" Late 2008 running os x 10.7.4
i will say briefly how did the problem begin and what is the problem
it stopped charging for some reason the magsafe light was (and still is) dim green and at the battery icon it said not charging but after a couple of hours that it was turned off and connected i found out it is charging really slowly
later on that week
i was using an app called DSLR remote connected to my camera i left my macbook on the table outside connected via usb to my camera waited on it and came back
when i came back my mac was out of battery
i took it in hook it up to the magsafe nada nothing not charging dim light
so what i did i knew my magsafe charger is ready to be changed so i bought a new one
tried it same problem
later on did an smc reset
it did turn on biw the fans are really loud the battery icon (x) and it said no batteries available
so i tried my old fastly drained battery it used to hold up about 1-2 hours then i bought another battery but that was in the past
so i tried both batteries smc reseting with both same result
the smcfancontrol app says fan speed 000 rpm and temoerature 0 C
and one more thing when the mac is off and not connected to the magsafe i click on the battery indicator light on the left side i get a flashing light (battery empty needs to be charged) when i connect the magsafe it stops working even when its off and while its just connected
so it is and SMC problem
it has been like that for the past 4 weeks or so
i really need some help
and im from israel so no apple genius bars around =_= and i have a good technical knowledge
Sincerely, Sari Hassoun

its not about solving or not its about trying to
i understand nobody wants to make any harm to my macbook
thats reasonable
anyway its a hardware faliure of some sort i'll need to check it my self but now im almost sure its not software because i've tried many things
my other option is to run it off a battery
the thing is my battery is out so when its attached the battey indicator lights do work (they are controled by the SMC) that might solve it too
thanks for replying really
its appreciated

Similar Messages

  • Macbook Pro - Late 2008 - Hard-drive Noise and Freezing

    I bought my Macbook Pro in the latter part of 2008 and I haven't had any problems with it until a week ago when I started hearing what I believe to be the hard drive (the lower right portion just to the right of the track pad). During this time, I could still move the cursor around but I could not click on anything and all applications opened froze. This would occur every couple of hours or so, after which I would have to restart my Macbook Pro. Does anyone know what could be the problem and how I can go about solving this? Thanks!!!

    Lately there have been quite a few debates on the hard replacement issues with MBP's and from what I have seen they mostly are around the power consumption of the drives being not compatible..
    So it's been many days now I'm recommending people this drive :
    http://www.amazon.com/Western-Digital-2-5-Inch-Internal-WD5000BEKT/dp/B003TOE4PQ
    It's one of the least power hungry drives on the market and is one of the highest performers as well.
    It's 7200 rpm and a whopping 500GB for 70-80 dollars is quite interesting .
    if you buy the drive and hesitate to replace don't worry it's a 5 minute super easy task and you will find plenty of help if you report back here
    I hope I could be of help

  • HT3053 Can I run my MacBook Pro Late 2008 without battery forever? Is it bad in long term or anything? Does it make the system less stable?

    Can I run my MacBook Pro Late 2008 without battery forever? Is it bad in long term or anything? Does it make the system less stable?
    My battery got swollen (and I unfortunately noticed it very late and might have be running with it for months, which potentially explains all the crashes everyday and the trackpad not working anymore, the Apple test also says I have a bar of ram broken...) and I had to remove it because the back pannel did not close anymore... Can I still use my MBP normally forever that way? I was planning on buying a new mac anyway but maybe waiting for the next iMac upgrade in the year... Should I wait?

    Other than the system shutting down instantly if you have a power outage, whcih could corrupt the OS. Nothing else bad will happen.

  • MacBook Pro Late-2008 Battery Can't Keep a Charge.

    I understand I bought my MacBook Pro Late-2008 just before they upgraded the MacBook batteries; it's never held a good charge, so I've had to keep it plugged in. Lately I've been finding myself needing it when outlets might not be readily available.
    After I remove the power cord, it doesn't stay charged for more than 3 minutes, 30 seconds (I've timed it more than once). Even with its age, this seems like a significant problem with the battery.
    I'm really not sure it's worth it to spend $130 on a replacement battery, and I'm not in a position to simply get a new MacBook.
    Are those third-party batteries actually legit? Is there a chance that an Apple Store might be able to take care of it? I'm well past the life of my Apple Care, obviously, but three minutes for the battery?
    What is my best option? Or just suck it up and deal with having to find an outlet wherever I go?
    Thanks.

    There are many third party batteries that are at best suspect.  I have seen on Amazon what appear to be legitimate OEM Apple batteries which I suspect are graymarket products.  You may try that at your own risk.  If you purchase from Apple. you will know what you will be getting and with a warranty.
    Ciao.
    OWC has what appears to be a battery that will fit your MBP.  They are a reputable vendor for Mac compatible products,
    http://eshop.macsales.com/item/NewerTech/BAP15MBU54RS/
    Message was edited by: OGELTHORPE

  • Macbook Pro (late) 2008 won't recognize HD and MAC OS X installed, but recognizes SAME HDD with Windows installed ... where is the problem !???D a

    Macbook Pro (late) 2008 won't recognize HDD and MAC OS X installed, but recognizes SAME HDD with Windows installed ... where is the problem !???
    And HDD is APPLE certified ( 250 GB )

    Hello JashaCOLD,
    Thank you for the details of the issue you are experiencing with your external hard drive.  I found an article with steps you can take when an external device is not being recognized.
    I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • MacBook pro (late 2008) shutting down even without the battery

    Hello
    I have a MacBook pro late 2008 model, recently it started to randomly shut down.
    I have tried the following
    - Reseting Pram
    - Reseting the SMC
    - Recalibrating the battery
    - New hard drive
    - Returned to original RAM (from 4 to 2Gb)
    - Removed the battery and run with the MagSafe only
    - Downloaded a fan control program to run it at max and verify if this was not a heating issue (although this also happens right after starting the laptop)
    Does anyone have any suggestions? I'm already loosing hope on my Mac :(
    Thanks for any help that you could provide

    Hi V,
    Even though the symptoms don't match up exactly, you may have the NVIDIA issue. First, go to System Profiler > Hardware > Graphics/Displays and see if you have the GeForce 8600M GT GPU. This is the GPU covered under the free repair program. While there, also look at PCIe Lane Width. If it says anything other than x16, the GPU has issues (but this is only one potential symptom). If you have the 8600 GPU, bring the MBP to an Apple Store or AASP for free testing. If Apple's free test confirms the issue, repair is free. Read all about it here: http://support.apple.com/kb/TS2377
    Also, whether you have the 8600 or not, you should run all the updates in Software Update.

  • Macbook pro late 2008 battery problem

    I have a macbook pro late 2008 and I've been experiencing problems with the battery. I have changed the battery two times till now and now it's telling me to service battery. I am not a heavy user and I always try to drain the battery twice a month. Can it be the power supply?
    I need help

    Hi there,
    I seem to have the same problem. My battery indicator gives me no more than 2 1/2 hours of battery life.
    I checked to see if my computer was set to better battery performance and it was.
    Now initially I thought that this may because of my external display (ACD 23") and my LaCie rugged external HD, which takes power from the FW connector. But even when I disconnect both of them I still only get two and a half hours of battery life, even when I leave the computer alone to just sit there.
    Now I'm guessing this isn't normal. It may take an software update to correct this. But if this doesn't get corrected this thing is useless to me. And I will no doubt return it.

  • My macbook pro (late 2008) shuts down but battery is at 25-30%

    My macbook pro (late 2008) shuts down but battery is at 25-30% and I don't get a low power warning box before this happens.  This only happens when the power chord is not connected, and it restarts with no problems once I put the power chord in. Does this mean I need a new battery, or is it an indication of something else? Using osx 10.5.8

    Mine is Unibody 15" MBP late 2008, with the exact problem as yours. It can be a sudden shut down at 25-32%, or, after upgrading to OS 10.7.2, can be hang all of sudden on battery power.
    Condition on, "Replace Soon". From 4.5 - 6 hours when new, goes down to 1 - 2 hours on discrete graphics.
    But after 'abusing' it for the first year in the heat of Jakarta's climate in a non AC room when doing a video editing, before moving back to a comfort AC room at home sweet home, the battery performance is still top notch comparing to other kind than Apple. Also, it caused me to replace the right fan, after a lot of hard work on that first year. Oh, and by the way, I regularly done the battery calibration, at least once or twice between 3-6 months.
    Here's also an useful link about battery I found on the internet:
    http://batteryuniversity.com/learn/article/how_to_prolong_lithium_based_batterie s
    My battery condition:
    Battery Information:
      Model Information:
      Serial Number:          6N8389BD13EB
      Manufacturer:          SMP
      Device Name:          bq20z951
      Pack Lot Code:          0
      PCB Lot Code:          0
      Firmware Version:          002a
      Hardware Revision:          000a
      Cell Revision:          100
      Charge Information:
      Charge Remaining (mAh):          2192
      Fully Charged:          No
      Charging:          Yes
      Full Charge Capacity (mAh):          2716
      Health Information:
      Cycle Count:          616
      Condition:          Replace Soon
      Battery Installed:          Yes
      Amperage (mA):          254
      Voltage (mV):          12392
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          0
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          15
      Automatic Restart on Power Loss:          No
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Wake on LAN:          No
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      GPUSwitch:          2
      PrioritizeNetworkReachabilityOverSleep:          0
      RestartAfterKernelPanic:          157680000
      Battery Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          5
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Display Sleep Uses Dim:          Yes
      GPUSwitch:          2
      Reduce Brightness:          Yes
      RestartAfterKernelPanic:          157680000
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          Yes
      ID:          0x0100
      Wattage (W):          85
      Revision:          0x0000
      Family:          0x00ba
      Serial Number:          0x0063ac36
      Charging:          Yes
    Got the battery replacement today. Hopefully it will last for at least 3 years like it predecessor.

  • Flashing Question mark: New hard drive not working Macbook Pro late 2008

    After following several peoples advice on this forum I decided to upgrade my Macbook Pro late 2008 with a Seagate (1TB) Solid State Hybrid Drive 2.5 inch.
    Heres the device.
    http://www.morecomputers.com/spec.aspx?pn=ST1000LM014
    After creating a mountable boot on a External hard drive with Mavericks install I removed the current hard drive and replaced with the new seagate drive. However it didn't seem to recognize the external hard drive (it is quite old but works perfectly) and went to a flashing grey question mark screen and wouldnt do anything else. Ive tried holding down command-r and option-r but I get nothing. Its just the same flashing question mark. I have done this several times and the same result.
    I put the old drive back in and it works fine.
    I am trying to work out is the problem with the mountable external hard drive OR is it the hard drive is not compatible with my computer?
    Appreciate your help
    Gary

    Sorry I think you may be confused.
    I am trying to install the new Seagate hard drive to my mac (not as an external hard drive).
    I replace the macbook pro hard drive with the seagate drive:
    http://www.morecomputers.com/spec.aspx?pn=ST1000LM014
    I then started up the machine with a usb external hard drive with a boot copy of mavericks on it. However, it just displayed a flashing question mark and wouldnt start booting the osx.
    I am trying to work out is the problem with the mountable external hard drive OR is it the hard drive is not compatible with my computer? Im guessing it must be hard drive. Would it be better to use a USB pen drive as the external hard drive is quite old?
    Does anyone know what the problem could be as the hard drive is brand new.
    Appreciate your help
    Thanks, Gary

  • I have a MacBook Pro late 2008 edition with 2 Gigs of RAM and running Mavericks. When trying to download Yosemite from the App Store it gives me an error message. Anyone has a similar problem?

    MacBook Pro late 2008 edition with 2 Gigs of RAM and running Mavericks (10.9.5). It gives me an error message when I try to download Yosemite

    All,
    I thought it may be related to spaces in the path in which the script was called from. I tried having the ODBC command script in another directory but the same thing happens. It will give me the "CONFIGSYSDSN: Unable to create a data source for the 'Oracle in OraClient10g_home1' driver: Could not load the setup or translator library with error code -2147467259". As soon as the script is done running I can manually double click the script and it adds the DSN fine.
    Thanks,
    Clif Bridegum

  • Macbook pro late 2008 (unibody) backlight not working, trackpad issue

    Hi,
    My wife is running 10.7.4 (Lion) on a MacBook Pro late 2008, first gen unibody. There is two issue with her computer.
    The first issue is that the backlight keyboard is not working correctly. In fact, it is not working at all. My assumption is that it stopped working when it had a a display assembly replacement in 2010. My wife not behing to technical realized she did not had this feature when I bought a MBA 13" last year. It could be something with the system (OS) but I'm pretty sure it is not. I open the back of the case to see if something (a missing wire connectivity) could be found, but none step to my eyes. I did not want to dismantle everything in case I'll be making it worst!
    The second issue is the trackpad. She told me many times that her mouse was not working as expected, and when I looked at, I finally found that the problem was not the mouse, but the trackpad. What I found is that the trackpad button, sometimes, stayed pressed. If that happen, eventually, the mouse is acting very trangely! My wife never uses the trackpad, so I can't figure out it is an abuse of it. To temporaly resolve the issue, I dissabled the trackpad when a mouse is connected in the Universal access system pref.
    I plan to have it send to the Apple store next time I go near one. The Apple Care is expired...
    My questions are:
    any idea of what may be the problem and is it repairable easily by myself?
    Could it be that the trackpad is broken in anyway?
    Could it be possible that the technician forgot to reconnect a cable near the keyboard (under the motherboard) that prevent the backlight to work?
    Thanks

    Hi,
    My wife is running 10.7.4 (Lion) on a MacBook Pro late 2008, first gen unibody. There is two issue with her computer.
    The first issue is that the backlight keyboard is not working correctly. In fact, it is not working at all. My assumption is that it stopped working when it had a a display assembly replacement in 2010. My wife not behing to technical realized she did not had this feature when I bought a MBA 13" last year. It could be something with the system (OS) but I'm pretty sure it is not. I open the back of the case to see if something (a missing wire connectivity) could be found, but none step to my eyes. I did not want to dismantle everything in case I'll be making it worst!
    The second issue is the trackpad. She told me many times that her mouse was not working as expected, and when I looked at, I finally found that the problem was not the mouse, but the trackpad. What I found is that the trackpad button, sometimes, stayed pressed. If that happen, eventually, the mouse is acting very trangely! My wife never uses the trackpad, so I can't figure out it is an abuse of it. To temporaly resolve the issue, I dissabled the trackpad when a mouse is connected in the Universal access system pref.
    I plan to have it send to the Apple store next time I go near one. The Apple Care is expired...
    My questions are:
    any idea of what may be the problem and is it repairable easily by myself?
    Could it be that the trackpad is broken in anyway?
    Could it be possible that the technician forgot to reconnect a cable near the keyboard (under the motherboard) that prevent the backlight to work?
    Thanks

  • AirDrop transfer between Mac mini (late 2012) and MacBook Pro (late 2008) works only one way.

    AirDrop transfer between Mac mini (late 2012) and MacBook Pro (late 2008) works only one way.  I see both machines on both airdrop windows. Firewalls on both machines are set exactly the same way, and with Network Browser set to allow.  Can send a file from Mac mini to MacBook, but not the other way.  Never get a window asking to accept on the Mac mini.
    Found no useful documentation on AirDrop anywhere in the whole support site.

    Maybe this will work. From an Apple support article.
    You can also use the Share button to send files to your neighbors via AirDrop. In a Finder window, select the item you want to share, and then click the Share button in the toolbar. For more information about the Share button, see this help topic:

  • Use airdrop between macbook pro late 2008 (mavericks installed) and iphone 5s.

    Can i transfer files between airdrop with a macbook pro late 2008 (mavericks installed) and iphone 5s?

    I have the same problem on my early 2011 mbp... i think it's a bug. there's not even a menu for see older macs or who can airdrop to me

  • User Contributed Tips in the MacBook Pro (Late 2008) Power and Batteries

    *The following User Contributed Tips are located in the MacBook Pro (Late 2008) > Power and Batteries on a MacBook Pro (Late 2008) forum:*
    None at this time.
    *The following related tips are located in other areas of Apple Discussions:*
    neuroanatomist - Apple notebook batteries – maintenance and troubleshooting
    http://discussions.apple.com/thread.jspa?threadID=1764220
    Publish date: Oct 23, 2008
    Also see User Tips Library

    The management is quite easy. You can move your Documents, Movies, Music, and Pictures folders to another drive and then replace them in the original location with aliases.
    Select Mac Help from the Finder's Help menu and search for "alias." This will provide a help file on creating and using aliases.

  • How can i Flash and restore the firmware ( EFI ) from a Macbook pro ( late 2008 , 5.1 ) ??

    How can i Flash and restore the firmware ( EFI ) from a Macbook pro ( late 2008 , 5.1 ) ??
    Please help me !!

    The Seagate backup drive I bought doesn't support 10.5.8
    The only reason I can see for that is it's formatted NTFS, which would likely be Read Only in 10.5.x, if you can reformat it MacOS extended, which would erase everything on it now, then that should work for your purposes.

Maybe you are looking for

  • Problems with syncing with iTunes

    Have had iPhone 4 for two (2) years and been syncing with itunes all that time. As of two days ago the sync process will not sync the calendars either way (from phone to PC or from PC to phone). PC has Win7 and XP Outlook. iPhone has 5.1.1 system (no

  • TS3274 Cannot get it to accept my password. I have changed it and it still won't accept.

    I have tried to sign in for the iMessage on my iPad 2. It won't accept my password. I have changed the password and it won't accept new password either.

  • System allows GRs to be reversed after invoices have posted and clear

    Users have noticed that it is possible to post a GR, post and clear and Invoice, then reverse the GRs, which is an audibility problem. Previously (possibly before upgrade to ECC 6) this was not possible.Is there any configuration available to change

  • How to filter data in defining request

    Hi Midhun, Could you please help me in filtering data in defining request in offline mode. Still I am trying to open the store and read the data from store I am getting 0 records read from the store Best Regards Abhinav Dodda

  • Save screen as .gif in Java 1.1

    Hi, I have a frame that the user draws on, and I need to save the contents of this frame as a .gif file. I'm running Java 1.1. Can anyone help? Thanks. import java.awt.*; import java.awt.event.*; class PaintArea extends Frame     static int x, y;