MacBook Pro Late 2008 USB provides power but won't read anything?

I tried connecting my USB port to a portable harddrive and unfortunately the harddrive never pops up on my desktop, but the harddrive turns on and receives power from my USB port. I also have an external fan base that can plug into the USB port and run perfectly, but when I plug something in like a mouse receiver I don't get a response. I can't even plug my iPhone into the USB port to get a response, but if I plug any off the listed accesories into my other port they all work fine.
Is my USB port faulty somehow or is there someway I can reset the hardware to work properly?
I tried resetting my PMR by removing the battery and holding the power button but that didn't work. I also tried rebooting and holding ctrl+option+cmd and PR which also did not work and if anything messed up my Mac's booting so now i have to hold option+cmd+O+F to get my laptop to boot properly.
I figured I might as well ask as i've made my problems worse...

Yes sorry it was cmd+option+PR i forgot the specifics. I did do that previously. Everything is checked off to be shown under finder preferences. The weird thing is that the USB port provides power, but it seems like it doesn't process information if that makes sense. So on my WD passport external harddrive it powers onw hen plugged in, but never shows on the defective port. On the other USB port it works perfectly. The same goes with any USB accessory like my mouse which when plugged int he defective port doesn't do anything.
A USB sandisk thumbdrive lights up when initially plugged in, but then the light goes off after a second and the disk is never recognized. If i plug the same disk in my other USB port, the light remains on and the drive pops up on my desktop and is easily read.

Similar Messages

Macbook Pro Late 2008 usb to serial cable stops communicating after Yosemite upgrade

I recently updated my MacbookPro to Yosemite and have found that my usb to serial cable no longer works. I've tried reinstalled drivers multiple times with no success when I connect my Gigaware usb to serial cable and conect my cisco console cable which used to work fine on Mavericks but now I get no output in my terminal program secureCRT.
I when my cable is connect I see the following in dev
hugh-millers-macbook-pro-77:dev Yogi$ ls tty.*
tty.Bluetooth-Incoming-Port tty.HughsiPhone-WirelessiAP
tty.Bluetooth-Modem tty.PL2303-00002006
hugh-millers-macbook-pro-77:dev Yogi$ ls *PL*
cu.PL2303-00002006 tty.PL2303-00002006
hugh-millers-macbook-pro-77:dev Yogi$
Here is what I see in System Information
USB-Serial Controller:
Product ID: 0x0fba
Vendor ID: 0x05ad (Y.C. Cable U.S.A., Inc)
Version: 3.00
Speed: Up to 12 Mb/sec
Manufacturer: Prolific Technology Inc.
Location ID: 0x04100000 / 4
Current Available (mA): 500
Current Required (mA): 100
SecureCRT is set to use /dev/cu.PL2303-00002006
Has anyone experienced this issue, can anyone assist?
Mac Info
MacBook Pro (15-inch, Late 2008)
2.53 GHz Intel Core 2 Duo
4 GB 1067 MHz DDR3

You can use this : http://www.macupdate.com/app/mac/51344/serial but let me tell you that last night I found the way to do it with Coolterm for free http://www.macupdate.com/app/mac/31352/coolterm
I think that the problem is the installation , you have to copy to sudo kextload /System/Library/Extensions/ProlificUsbSerial.kext or in my case I used this as reference, now it is working....
http://www.xbsd.nl/2011/07/pl2303-serial-usb-on-osx-lion.html
I hope this can help

I did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

i did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

That does not work on model year older then 2010 and really doesn't work on any older then late 2011 models.
You will need a set of original system dvd disc thjat are always sypplied with every mac sold before Lion came out. Systems older then late release early 2011 models.
If you don't have them you kcan order a replacement set from apple by calling them. Have the serial number of you mac handy.

Focusrite Saffire 6 USB (1.1) with Macbook Pro late 2008

Equipment-
     Macbook Pro Late 2008 w/ Yosemite 10.10.2
     Focusrite Saffire 6 USB (1.1)
The Saffire 6 is a audio interface using USB 1.1 to connect microphones to my Macbook. It has 2 inputs and 4 outputs. I've had this unit for years and has worked fine. I realized today that I haven't used it since upgrading to 10.10 (Yosemite) and wasn't able to get it working. When I try to set it within Sound Preferences, all devices, In and Out, go blank, then come back constantly. It will even change Built-In Mic to "Unknown".
The Saffire website (http://global.focusrite.com/usb-audio-interfaces/saffire-6-usb/downloads) lists two different driver choices to use, but one is labeled specifically for 10.8.5. The other just says "Mac". I'm certain my device is USB 1.1. If it were 2.0, I wouldn't need a driver. According to the website, I should use the 2.9 version.
How can I check to see if all previous driver installations are clear?
Is there anything I can check to make this thing work? The Focusrite website (http://us.focusrite.com/answerbase/are-focusrite-products-compatible-with-osx-yo semite) says that the Saffire 6 USB is compatible with Yosemite.
I've emailed Focusrite and I'm hoping between them and this forum, I can get this working again.
Thanks!!

I've spoken to Focusrite. They had me try a number of things. I tried some of my own things.
Different USB cable
Deleted VodBurner device
Repaired Permissions
Installed/Uninstalled 3ivx codec
Reset PRAM
Performed Safeboot
Removed Startup items
     Growl, Sizeup, Crossover CD Helper, Dropbox
     Disable MagicPrefs from Autostart
Still not able to get it to work. The device will work on an XP computer but I don't have another Mac to try it out on. Any suggestions?

Macbook Pro (late) 2008 won't recognize HD and MAC OS X installed, but recognizes SAME HDD with Windows installed ... where is the problem !???D a

Macbook Pro (late) 2008 won't recognize HDD and MAC OS X installed, but recognizes SAME HDD with Windows installed ... where is the problem !???
And HDD is APPLE certified ( 250 GB )

Hello JashaCOLD,
Thank you for the details of the issue you are experiencing with your external hard drive. I found an article with steps you can take when an external device is not being recognized.
I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
USB and FireWire Quick Assist
http://support.apple.com/kb/HT1151
Thank you for using Apple Support Communities.
Best,
Sheila M.

User Contributed Tips in the MacBook Pro (Late 2008) Power and Batteries

*The following User Contributed Tips are located in the MacBook Pro (Late 2008) > Power and Batteries on a MacBook Pro (Late 2008) forum:*
None at this time.
*The following related tips are located in other areas of Apple Discussions:*
neuroanatomist - Apple notebook batteries – maintenance and troubleshooting
http://discussions.apple.com/thread.jspa?threadID=1764220
Publish date: Oct 23, 2008
Also see User Tips Library

The management is quite easy. You can move your Documents, Movies, Music, and Pictures folders to another drive and then replace them in the original location with aliases.
Select Mac Help from the Finder's Help menu and search for "alias." This will provide a help file on creating and using aliases.

My macbook pro (late 2008) shuts down but battery is at 25-30%

My macbook pro (late 2008) shuts down but battery is at 25-30% and I don't get a low power warning box before this happens. This only happens when the power chord is not connected, and it restarts with no problems once I put the power chord in. Does this mean I need a new battery, or is it an indication of something else? Using osx 10.5.8

Mine is Unibody 15" MBP late 2008, with the exact problem as yours. It can be a sudden shut down at 25-32%, or, after upgrading to OS 10.7.2, can be hang all of sudden on battery power.
Condition on, "Replace Soon". From 4.5 - 6 hours when new, goes down to 1 - 2 hours on discrete graphics.
But after 'abusing' it for the first year in the heat of Jakarta's climate in a non AC room when doing a video editing, before moving back to a comfort AC room at home sweet home, the battery performance is still top notch comparing to other kind than Apple. Also, it caused me to replace the right fan, after a lot of hard work on that first year. Oh, and by the way, I regularly done the battery calibration, at least once or twice between 3-6 months.
Here's also an useful link about battery I found on the internet:
http://batteryuniversity.com/learn/article/how_to_prolong_lithium_based_batterie s
My battery condition:
Battery Information:
Model Information:
Serial Number:          6N8389BD13EB
Manufacturer:          SMP
Device Name:          bq20z951
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          002a
Hardware Revision:          000a
Cell Revision:          100
Charge Information:
Charge Remaining (mAh):          2192
Fully Charged:          No
Charging:          Yes
Full Charge Capacity (mAh):          2716
Health Information:
Cycle Count:          616
Condition:          Replace Soon
Battery Installed:          Yes
Amperage (mA):          254
Voltage (mV):          12392
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          0
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          15
Automatic Restart on Power Loss:          No
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          No
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
PrioritizeNetworkReachabilityOverSleep:          0
RestartAfterKernelPanic:          157680000
Battery Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          5
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
Reduce Brightness:          Yes
RestartAfterKernelPanic:          157680000
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0100
Wattage (W):          85
Revision:          0x0000
Family:          0x00ba
Serial Number:          0x0063ac36
Charging:          Yes
Got the battery replacement today. Hopefully it will last for at least 3 years like it predecessor.

Macbook pro late 2008 update to osx mountain lion already but can't open safari

macbook pro late 2008 update to osx mountain lion already but can't open safari

Where did you buy this "open box" MacBook Pro?
Here are the specifics on the upgrade program:
http://www.apple.com/osx/uptodate/

Macbook pro late 2011. Have power on the battery but doesn't turn on at all.

Macbook pro late 2011. Have power on the battery but doesn't turn on at all. Not even a sound, my mac has stayed turned off in nearly a month and now its not working???
Any ideas to what the problem could be?
Regards// Michael

If a SMC reset does not bring life to your MBP, make an appointment at an Apple store genus bar for a free diagnosis.
http://support.apple.com/kb/ht3964
Ciao.

Macbook Pro Late 2008 Boot Issue

Hello All!
So I have an issue i would like to throw into the ring and see if I get any responses I have not thought of yet. Let me give you a quick backstory to my recent macbook adventures.... I will start with a quick prelude story.
Chapter One:
Purchased a used Macbook Pro, Late 2008 2.53ghz, 4gb DDR3 ram with no charger off ebay. And yes, I should know better. But honestly, it only had a cracked screen but still worked perfectly connected to an external monitor and i could not pass on the price of it.
Chapter Two:
After recieving my purchase, I determined that it was just a cracked cover over the LCD screen which is easily replaced, but the backlight was out on the LCD. So i ordered a new LCD. The new LCD did not fix my issue, which then pointed me to a problem on the motherboard. I then sent it out and had it repaired.
Chapter Three:
Upon recieving my newly repaired macbook, I installed a new SSD drive, battery and replaced the screen cover for the newly installed LCD. It looks Fantastic if I do say so myself! I then proceded to install lion and I have a perfect running Macbook Pro for less than 700 bucks after all was said and done.
Chapter Four:
Now, at this point you should know why I bought it... I use it for djing. That is it. There is nothing else on this. No apps, programs, or scripts. It has an updated lion OS on it and my serato itch Djing software. There isnt even any music on it as i store that on an external 3T WD elements drive. (I only installed an 80gb SSD for the OS system). Unfortunately i have had some instances where the Mac Pro has just shut down completely while im spinning! Not good for business!
Chapter Five:
Over the course of the last year I have noticed some things happening. Longer than normal boot times (especially since it has an SSD in it this seems wierd to me) and crashing of the Itch software while trying to analyze music or just not closing itch at all when im done playing a show and having to press and hold the power button to turn off the mac. Now for the kicker... Unbeknowst to me, apparently you cant use a 65W charger on a macbook that requires an 85W charger, this i just recently learned. The charger i was using was a 65W from a white 13 inch macbook 2006. I just recently aquired the 85W charger.
This brings us to the present.....
Here is the issue. I was analyzing my music files using itch, when suddenly & randomly one of the 2 analyzing indicators would just stop analyzing the track it was on... This leaves only one analyzer bar going and the other just stuck where it is (16000 songs will take awhile with only one analyzer going). If i stop analyzing and restart it, it picks up where it left off and continues for a bit and stops again, but its never the same track or same length of time before it stops analyzing. Now I have tried this with both Lion and Snow Leopard (the white macbook 2006 has snow) and it appears to happen with either OS.
So I decided to install Snow on my Mac Pro 2008. For some reason, and I dont know why, it would not let me install snow to the partion I made on the drive. The disc would just keep rebooting the Mac pro over and over again. I know for a fact that snow works because I took the drive out of the white Macbook 2006 and put it into the Mac Pro 2008. Booted right up.
So, I have re-installed itch on lion... Still has the same problem with lion.
I have restored a copy of snow to the partioned hard drive of my Mac Pro 2008 from my white macbook 2006. This seems to be the only way to do this if i want snow on my Mac Pro 2008 since it won't boot Snow from disc or USB. Installed a new copy of itch, still the same problem.
So my question is this.... Is it hardware or software?
And to stop those from putting the obvious, I have done all the PVRAM, SMC etc resets!! I am not some 12yr old trying to make daddys computer work again because i used it like i shouldn't have. Im looking for something besides the obvious!
Sorry, but I felt the entire story needed to be told in order to get the responses I'm looking for....
And thanks for taking the time to read about my issues! Hopefully someone can point me in the direction I need to go to get this to stop doing what it's doing. I will be more than happy to answer any and all questions concerning this issue as best I can.

The heat generated may be a function of what you are doing on the Internet. Watching videos will stress the CPU/GPU and create heat and result in faster fan speeds.
First try a SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/PH14222?viewlocale=en_US
If there is no change, post back.
Ciao

User Contributed Tips, Ports & interfaces on MacBook Pro (Late 2008 & 2009)

*The following User Contributed Tips are located in the Ports and interfaces on the MacBook Pro (Late 2008 and 2009) Forum:*
None at this time.
*The following related tips are located in other areas of Apple Discussions:*
a brody - June 8, 2009 MacBook and Pros myths and facts
http://discussions.apple.com/thread.jspa?threadID=2032539
Publish date: June 26, 2009
See also the User Tips Library

Thanks again for your help Rod!
One of the first things I tried was different combinations of devices to see if it may have been the device just not powering up. The main device I use is an official Apple wired keyboard, because at home I connect my MBP to my monitor and use a separate keyboard and mouse. I have tried other devices too with the same result, they only work when the dock is connected. I have tried connecting my iPhone via USB cable, i have a 16GB SanDisk Cruzer flash drive, which only lights up if the dock is connected, and I have a 4 port USB hub with a power LED on it, which again only lights up when the dock is connected.
I looked in system profiler, and it says the USB ports are there, but doesn't recognise any devices plugged in, other than the dock. However, when the dock is plugged in, for example, it recognises the Apple keyboard in the other port.
I took two screen shots, one of system profiler without the dock plugged in (USB keyboard still plugged in but not showing up), and another of when I plugged the dock in.
Without Dock:
With Dock:
It might be worth pointing out that the HDD dock has two USB ports on it, which is what is highlighted in the second pic.
I have also tried rebooting the computer with devices already attached but with the same result again. I've tried booting it with the dock and the keyboard attached, with just the keyboard, with just the dock, but either way unless the dock is connected, nothing else will work via USB.
I just want to say thanks again Rod, it's very kind of you to spend your time trying to help me, and it is really appreciated!
I'm going to contact Apple support shortly and see if they can offer a solution, or see if I can send it in for repair, which I am reluctant to do seeing as it's my only computer
Cheers!
Gav

HT3053 Can I run my MacBook Pro Late 2008 without battery forever? Is it bad in long term or anything? Does it make the system less stable?

Can I run my MacBook Pro Late 2008 without battery forever? Is it bad in long term or anything? Does it make the system less stable?
My battery got swollen (and I unfortunately noticed it very late and might have be running with it for months, which potentially explains all the crashes everyday and the trackpad not working anymore, the Apple test also says I have a bar of ram broken...) and I had to remove it because the back pannel did not close anymore... Can I still use my MBP normally forever that way? I was planning on buying a new mac anyway but maybe waiting for the next iMac upgrade in the year... Should I wait?

Other than the system shutting down instantly if you have a power outage, whcih could corrupt the OS. Nothing else bad will happen.

MacBook Pro late 2008 no longer working with Airport Express

Hi,
since a few days I have big problems with my MacBook Pro (late 2008) and my Airport Express. The MacBook can't find the airport express anymore, even not with the airport utility...
The Airport Express is correctly configured as my Ipod, Blackberry and Dell pc are connecting to it and do have internet access...
I can only manage the Airport Express when I'm directly connected to it with an ethernet cable.
My brother has an airport expreme, I tested it with my MacBook Pro and there it just works fine...
Can anyone help me? Has it something to do with an update for Mac OS X or the firmware from the Airport Express?
Many thanks in advance!

Thanks for the response,
1. I live in Atlanta, close enough to an Apple store. But I just know that going there will probably mean I'll have to get the logic board replaced.
2. The only thing I noticed before the first USB port started acting funny was that my battery status changed to "Service Battery". I plan on replacing it this week too.
3. Nope only difference is that my battery drains kind of fast. After about 3-4 hours of my normal usuage with it (Internet, music, videos, and sometimes using Logic) it will be time to hook up the charger.
Would replacing the battery do anything? I'm not thinking it would but figure it'd be worth a shot since I've got to replace it anyway.
And to goofyziggy,
I too noticed that most people who had this problem had some version of OSX 10.8.x

Internal HD upgrade or external HD for my Macbook Pro (Late 2008)

Hello,
I am finding the 250gb internal hard drive not enough and want to upgrade to a 500gb/1tb hard drive for my macbook pro (late 2008 edition).
What I am wondering is whether to change the internal hard drive OR buy the fastest possible external hard drive for my mac which I believe is one that works with firewire 800 as my late 2008 macbook pro does not come with USB 3.0.
The external hard drive I have found is £110 and my macbook would be using the Firewire 800 connection:
LaCie Rugged Triple 301984 1TB USB 3.0 and Firewire 800 5400 rpm Portable Hard Disk Drive
http://www.amazon.co.uk/Rugged-Triple-301984-Firewire-Portable/dp/B005C2BNJI
I dont necessarily need the portability of a external hard drive. I work with large files (photoshop, illustrator files mainly) and would would be concerned that I would not be able to work directly on the hard drive for this type of work so an internal hard drive may be better/
Can anyone suggest a good, fast, cheap, popular internal hard drive compatible with my computer and whether you would suggest changing the internal HD or buying an external.
I am running Mavericks and the only other change I have made is by upgrading my RAM from 4gb to 8gb. Thanks so much for your help
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 3 MB
Memory: 8 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP51.007E.B06
SMC Version (system): 1.33f8
Serial Number (system): W8******1G0
Hardware UUID: *****
Sudden Motion Sensor:
State: Enabled
<Edited By Host>

For both convenience and speed, I'd recommend replacing the internal hard drive. Your MacBook Pro can handle nearly any internal SATA 2.5" HD on the market, including 7200rpm models. For what it's worth, I'd recommend a Western Digital Black WD7500BPKX or similar or Hitachi HGST 7K1000 although in my experience Hitachi drives run hot and that's the reason I don't use them as internal drives.
FW800 is fine, but then you have an external hard drive to lug around plus the connection is considerably slower than the internal SATA connection used by the internal hard drive.
Note that you will have to either 1) clone your existing drive to the new drive or 2) completely reinstall OSX and all your apps from scratch to the new drive when you replace the internal drive. If it were me, I'd take the opportunity to reinstall everything from scratch.
btw, I have done this myself on a number of 2008/2009 MacBook Pros and it's not hard at all. iFixit has tutorials on how to do this. (Here is a link to the one that I believe is your model.

My macbook pro late 2008 randomly freeze

Hi I recently upgrade my macbook pro Late 2008 by adding a 250 go Crucial SSD drive in the main harddrive spot. I also put a 1 To HDD in the place of the super drive.
Since then, my macbook randomly freeze. I can't see any link to any specific usage. It just happen for no reasons. I had to reboot by holding the power button.
Thanks for your help!
Here is the informations I collect using the software "EtreCheck":
Description du problème :
L’ordinateur gèle sans raisons. Peu importe le moment ou l’intensité de l’utilisation.
EtreCheck version: 2.1.8 (121)
Report generated 18 avril 2015 13:21:13 UTC−4
Télécharger EtreCheck à http://etresoft.com/etrecheck
Cliquez sur les liens [Cliquer pour l’aide] pour l’assistance avec les produits non-Apple.
Cliquez sur les liens [Détails] pour plus d'informations sur cette ligne.
Informations matérielles : ℹ️
    MacBook Pro (15 pouces, fin 2008) (Caractéristiques techniques)
    MacBook Pro - modèle : MacBookPro5,1
    1 2.4 GHz Intel Core 2 Duo CPU : 2-core
    8 GB RAM Extensible
        BANK 0/DIMM0
            4 GB DDR3 1067 MHz ok
        BANK 0/DIMM1
            4 GB DDR3 1067 MHz ok
    Bluetooth: Vieux - Handoff/Airdrop2 pas disponible
    Wireless: en1: 802.11 a/b/g/n
    La santé de la batterie : Normal - Comptage de cycles 155
Informations vidéo : ℹ️
    NVIDIA GeForce 9400M - VRAM : 256 MB
    NVIDIA GeForce 9600M GT - VRAM : 256 MB
        Color LCD 1440 x 900
        SMBX2450 spdisplays_1080p
Logiciel du système : ℹ️
    OS X 10.9.5 (13F34) - Temps depuis le démarrage : 0:7:8
Informations des disques : ℹ️
    Crucial_CT256MX100SSD1 disk0 : (256,06 GB)
        EFI (disk0s1) <non monté> : 210 Mo
        New Macintosh HD - SSD 2014 (disk0s2) / : 255.72 Go (66.29 Go libre)
    ST1000LM024 HN-M101MBB disk1 : (1 TB)
        EFI (disk1s1) <non monté> : 210 Mo
        Storage Macintosh (disk1s2) /Volumes/Storage Macintosh   : 999.86 Go (942.51 Go libre)
Informations USB : ℹ️
    Apple Inc. Built-in iSight
    Apple, Inc. Keyboard Hub
        Apple Inc. Apple Keyboard
    Brother HL-L2360D series
    Apple, Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
    Logitech USB Receiver
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
Gatekeeper : ℹ️
    Mac App Store et développeurs identifiés
Extensions du noyau : ℹ️
        /Library/Extensions
    [engagé]    com.Logitech.Control Center.HID Driver (3.9.1 - SDK 10.8) [Cliquer pour l’aide]
    [engagé]    com.movavi.driver.SoundGrabber (1.6.5 - SDK 10.6) [Cliquer pour l’aide]
        /System/Library/Extensions
    [désengagé]    com.IKMultimedia.driver.StompIO1 (1.0.0) [Cliquer pour l’aide]
    [engagé]    com.Logitech.Unifying.HID Driver (1.3.0 - SDK 10.6) [Cliquer pour l’aide]
    [désengagé]    com.caiaq.driver.NIUSBGuitarRigMobileDriver (2.4.23) [Cliquer pour l’aide]
    [désengagé]    com.caiaq.driver.NIUSBHardwareDriver (2.4.23) [Cliquer pour l’aide]
    [désengagé]    com.digidesign.iokit.DigiDal (8.0.1f1) [Cliquer pour l’aide]
    [désengagé]    com.digidesign.iokit.DigiIO (8.0.1f1) [Cliquer pour l’aide]
    [désengagé]    com.ikmultimedia.driver.StealthPedal (1.0.0) [Cliquer pour l’aide]
    [désengagé]    com.maudio.usb.fasttrackpro.driver (1.8.1) [Cliquer pour l’aide]
    [désengagé]    com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) [Cliquer pour l’aide]
    [désengagé]    com.seagate.driver.PowSecDriverCore (5.2.6 - SDK 10.4) [Cliquer pour l’aide]
        /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
    [désengagé]    com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) [Cliquer pour l’aide]
    [désengagé]    com.paceap.kext.pacesupport.panther (5.9 - SDK 10.-1) [Cliquer pour l’aide]
    [engagé]    com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) [Cliquer pour l’aide]
    [désengagé]    com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) [Cliquer pour l’aide]
        /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
    [désengagé]    com.seagate.driver.PowSecLeafDriver_10_4 (5.2.6 - SDK 10.4) [Cliquer pour l’aide]
    [désengagé]    com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6 - SDK 10.5) [Cliquer pour l’aide]
    [désengagé]    com.seagate.driver.SeagateDriveIcons (5.2.6 - SDK 10.4) [Cliquer pour l’aide]
Éléments de démarrage : ℹ️
    HP IO : Chemin : /Library/StartupItems/HP IO
    Les éléments de démarrage sont obsolètes avec OS X Yosemite
Daemons de lancement systèmes avec un problème : ℹ️
    [en marche]    com.seagate.TBDecorator.plist [Cliquer pour l’aide]
Agents de lancement : ℹ️
    [désengagé]    com.adobe.AAM.Updater-1.0.plist [Cliquer pour l’aide]
    [en marche]    com.adobe.AdobeCreativeCloud.plist [Cliquer pour l’aide]
    [échec]    com.adobe.ARMDCHelper.cc24aef4a1b90ed56a...plist [Cliquer pour l’aide]
    [échec]    com.lexmark.bmlaunchd.plist [Cliquer pour l’aide]
    [échec]    com.lexmark.lexnetlaunchd.plist [Cliquer pour l’aide]
    [en marche]    com.Logitech.Control Center.Daemon.plist [Cliquer pour l’aide]
    [en marche]    com.m-audio.fasttrackpro.helper.plist [Cliquer pour l’aide]
    [engagé]    com.oracle.java.Java-Updater.plist [Cliquer pour l’aide]
Daemons de lancements : ℹ️
    [en marche]    com.adobe.adobeupdatedaemon.plist [Cliquer pour l’aide]
    [engagé]    com.adobe.ARMDC.Communicator.plist [Cliquer pour l’aide]
    [engagé]    com.adobe.ARMDC.SMJobBlessHelper.plist [Cliquer pour l’aide]
    [engagé]    com.adobe.fpsaud.plist [Cliquer pour l’aide]
    [engagé]    com.oracle.java.Helper-Tool.plist [Cliquer pour l’aide]
    [engagé]    com.oracle.java.JavaUpdateHelper.plist [Cliquer pour l’aide]
    [en marche]    com.paceap.eden.licensed.plist [Cliquer pour l’aide]
    [engagé]    PACESupport.plist [Cliquer pour l’aide]
Agents de lancement pour l’utilisateur : ℹ️
    [engagé]    com.adobe.AAM.Updater-1.0.plist [Cliquer pour l’aide]
    [engagé]    com.adobe.ARM.[...].plist [Cliquer pour l’aide]
    [engagé]    com.facebook.videochat.[expurgé].plist [Cliquer pour l’aide]
    [engagé]    com.google.keystone.agent.plist [Cliquer pour l’aide]
    [engagé]    com.valvesoftware.steamclean.plist [Cliquer pour l’aide]
Éléments Ouverture : ℹ️
    Steam    Application (/Applications/Steam.app)
    TimingHelper    UNKNOWN (missing value)
    gfxCardStatus    Application (/Applications/gfxCardStatus.app)
    Tabs    UNKNOWN (missing value)
    AURecvAddHostSheet.nib    Document Caché (/System/Library/Components/CoreAudio.component/Contents/PlugIns/CoreAudioAUUI. bundle/Contents/Resources/ro.lproj/AURecvAddHostSheet.nib)
    Chronicle Mini    UNKNOWN (missing value)
    MenuTab for Facebook    UNKNOWN (missing value)
    ElementsAutoAnalyzer    Application (/Applications/Adobe Elements 10 Organizer.app/Contents/ElementsAutoAnalyzer.app)
    Dropbox    Application (/Applications/Dropbox.app)
    NIHardwareAgent    Application Caché (/Library/Application Support/Native Instruments/Hardware/NIHardwareAgent.app)
    AdobeResourceSynchronizer    Application Caché (/Applications/Adobe Acrobat DC/Adobe Acrobat.app/Contents/Helpers/AdobeResourceSynchronizer.app)
    HP Scheduler    Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
Plug-ins internets : ℹ️
    Default Browser : Version : 537 - SDK 10.9
    Flip4Mac WMV Plugin : Version : 2.4.4.2 [Cliquer pour l’aide]
    iLokClientHelper : Version : 3.5 - SDK 10.5 [Cliquer pour l’aide]
    OfficeLiveBrowserPlugin : Version : 12.3.6 [Cliquer pour l’aide]
    AdobeAAMDetect : Version : AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Cliquer pour l’aide]
    FlashPlayer-10.6 : Version : 17.0.0.169 - SDK 10.6 [Cliquer pour l’aide]
    AdobePDFViewerNPAPI : Version : 15.007.20033 - SDK 10.8 [Cliquer pour l’aide]
    DivXBrowserPlugin : Version : 2.0 [Cliquer pour l’aide]
    Flash Player : Version : 17.0.0.169 - SDK 10.6 [Cliquer pour l’aide]
    LogMeIn : Version : 1.0.961 - SDK 10.7 [Cliquer pour l’aide]
    iPhotoPhotocast : Version : 7.0
    LogMeInSafari32 : Version : 1.0.961 - SDK 10.7 [Cliquer pour l’aide]
    AdobePDFViewer : Version : 15.007.20033 - SDK 10.8 [Cliquer pour l’aide]
    QuickTime Plugin : Version : 7.7.3
    RealPlayer Plugin : Version : Inconnu [Cliquer pour l’aide]
    Silverlight : Version : 5.1.30514.0 - SDK 10.6 [Cliquer pour l’aide]
    JavaAppletPlugin : Version : Java 8 Update 45 Vérifier la version
Plug-ins internets pour l’utilisateur : ℹ️
    fbplugin_1_0_3 : Version : Inconnu [Cliquer pour l’aide]
Extensions de Safari : ℹ️
    Searchme [Adware ! - Enlever]
    Antidote
    Amazon Shopping Assistant [Adware ! - Enlever]
    Ebay Shopping Assistant [Adware ! - Enlever]
Panneaux de préférences tiers : ℹ️
    DivX [Cliquer pour l’aide]
    Flash Player [Cliquer pour l’aide]
    Flip4Mac WMV [Cliquer pour l’aide]
    Java [Cliquer pour l’aide]
    Logitech Control Center [Cliquer pour l’aide]
    M-AudioFastTrackPro [Cliquer pour l’aide]
    Native Instruments USB Audio [Cliquer pour l’aide]
    Paragon NTFS for Mac ® OS X [Cliquer pour l’aide]
Time Machine : ℹ️
    Ignorer les fichiers du système : NON
    Sauvegarde automatique : OUI
    Disques sauvegardés :
        New Macintosh HD - SSD 2014 : Taille de disque : 255.72 Go Disque utilisé : 189.42 Go
    Destinations :
        MACintouch [Local]
        Taille totale : 499.76 Go
        Nombre de sauvegardes total : 29
        Sauvegardes la plus agée : 2013-11-18 17:57:27 +0000
        Dernière sauvegarde : 2015-04-16 16:37:30 +0000
        Taille de la disque de sauvegarde : Trop petit
            Taille de sauvegarde 499.76 Go > (Disque utilisé 189.42 Go X 3)
L’utilisation du CPU par processus : ℹ️
         9%    WindowServer
         1%    mdworker
         0%    mds
         0%    fontd
         0%    AdobeCrashDaemon
L’utilisation de la RAM par processus : ℹ️
    490 Mo    firefox
    120 Mo    com.apple.IconServicesAgent
    103 Mo    mds_stores
    94 Mo    Creative Cloud
    69 Mo    ocspd
Informations de la mémoire virtuelle : ℹ️
    4.58 Go    RAM Disponible
    1.88 Go    RAM Active
    1.11 Go    RAM Inactive
    753 Mo    RAM Résidente
    758 Mo    Pages entrants
    0 o    Sorties pages
Informations du diagnostic : ℹ️
    Apr 18, 2015, 01:13:39 PM    Examen de soi - succès
    Apr 17, 2015, 06:22:44 PM    /Users/[expurgé]/Library/Logs/DiagnosticReports/Empire Total War_2015-04-17-182244_[expurgé].crash
    Apr 6, 2015, 02:03:41 PM    /Library/Logs/DiagnosticReports/Kernel_2015-04-06-140341_[expurgé].panic [Click for details]

Hi r.w.p & welcome to the forums...
Some or all of the following may be necessary - try in this order:
1. Try resetting your PRAM/NVRAM ( http://support.apple.com/kb/HT1379?viewlocale=en_US ). If everything isn't fixed, then continue to follow the steps here including resetting your SMC ( http://support.apple.com/kb/HT1411 ) if necessary.
2. Use Font Book to eliminate all bad and duplicate fonts.
3. Reinstall (or install for the first time) the .6.1 and .6.2 updates by downloading and installing the combo updater ( http://support.apple.com/kb/DL959 ).
4. Reinstall 10.6 using your Snow Leopard install DVD by installing Snow over Snow using the upgrade method. Test your system after returning to 10.6. If is good there, then you may not want to re-install the.6.1 & .6.2 updates - if you do, then use the combo updater again ( http://support.apple.com/kb/DL959 ).
Still no joy, take it to an Apple Store and ask staff there for assistance.

MacBook Pro Late 2008 USB provides power but won't read anything?

Similar Messages

Maybe you are looking for