MacBook Pro Late 2008 won't see my scanner

I have a new MacBook Pro. I noticed that I could not find my scanner anywhere in the system. I installed Adobe Acrobat and went to create a pdf from a scanner and the software could not find my device.
Any tips on how to get the system to see my scanner? I have an HP Photosmart 2710.
Thanks.

Did you load the scanner software?
I have an epson scanner that required that I installed specific drivers before being able to use the scanner.

Similar Messages

  • Macbook Pro (late) 2008 won't recognize HD and MAC OS X installed, but recognizes SAME HDD with Windows installed ... where is the problem !???D a

    Macbook Pro (late) 2008 won't recognize HDD and MAC OS X installed, but recognizes SAME HDD with Windows installed ... where is the problem !???
    And HDD is APPLE certified ( 250 GB )

    Hello JashaCOLD,
    Thank you for the details of the issue you are experiencing with your external hard drive.  I found an article with steps you can take when an external device is not being recognized.
    I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • MacBook Pro (Late 2008) won't start up

    Since December 2012, my MacBook Pro (late 2008) refuses start up. After trying many, many things (from online forums - nothing worked), the solution I found by hit and miss is to heat up the back of the laptop in front of my fireplace (or with a hair dryer), to remove the battery, to wait a few seconds and then to put it back in; after doing this, it turns on without a fuss and remains in perfect running condition until I turn it off again. I now leave it on 24/7 when at home, and I don't dare taking it away with me again... Seems to me a contact got loose and the heat expands it just enough to make it work again. Manufacturing problem?
    Has anybody else got the same or a similar problem? I hope to fix this without going to an Apple store if possible, as it's not under warranty any more...
    By the way, I have since replaced the battery and the hard disk, but that particular problem remains; I'm running OS X 10.8.2.

    It coule be one of two things:
    1) Your hard drive has become corrupted, and you'll have to reinstall the OS and cut your losses.
    2) Your logic board is fried. I seriously hope that this isn't the problem, but if it is, then it's time for a new mac.
    My macbook pro was stuck on a bootup loop, and I finally had to reinstall the OS. This fixed my problem. On the other hand, I had this same problem on my iMac, and an OS reinstall didn't do anything.
    Before making any judgements, take it to the genius bar and get some expert advice.

  • Macbook Pro late 2008 won't turn on

    I had a well working Macbook Pro unibody late 2008 (15 inches) but wanted to upgrade it a bit so after changing the HD to 1TB (which worked with no issues) I ordered some RAM to get it to 8GB (from 4). I opened it, changed the RAM, cleaned up the Fans that were really full of dust, put everything back and surprise: The Power button does NOT respond. Battery is fully charged, MagSafe is green, everything seemd normal but it just won't turn on.
    I tried to put the old RAM back in it => Same result.
    I tried to reset the SMC following this http://support.apple.com/kb/HT3964 (removed the battery and power, pressed the button for 5 seconds, plug it back) but it didn't work either..
    I checked every cable I could see under the hood but I really didn't touch much of the machine besides the fansm that I didn't even unplug..
    What could cause this?? How do you troubleshoot a machine that won't even power.
    Help please!
    thanks

    apassemard,
    how did you clean the fans? The MacBook Pro’s internals are extremely sensitive to static electricity; if you did not take care to discharge any static electricity on your person before working with its internals, you might well have fried them through static electricity discharging into your MacBook Pro’s logic board.

  • My macbook pro (late 2008) won't recognize dvd or cd?

    A few days ago my computer stopped recognizing that a disc was in the drive.  It has worked fine up until now.  Each time I insert a disc, the computer will spin the disc, then spit it back out.  I have tried opening programs that use the drive such as DVD Player, VLC Media Player, iTunes, Propresenter, and a DVD Ripping software to try to get it to use the drive, but none of these worked. 

    Spray canned air into the drive before you replace it.  Mine gives me fits everytime I use it (which isn't often) until I spray it out with air.

  • Macbook pro late 2008 13 inch won't run 8 gb ram

    Hello, I have a question that has been bothering me for a while now.
    I bought a 4gb Ram Module at best buy, it is 1066GhZ DDR3 SODIM.H from PNY to upgrade my macbook pro to 8gb of RAM, everything was going well, I got home and opened up my macbook, inserted the module and turned on my mac.
    Everything started working fine until I tried to open google chrome, my machine went into a kernel panic and restarted itself.
    Being as I am, I decided to wipe my machine and re-install mountain lion (I run it because mavericks slows down my computer) but my machine wouldn't let me install it.
    I opened my computer up again, re-installed the 1gb module from the fabric and the computer worked well.
    Now, my question is this: Isn't my computer able to run 8 gb in RAM? I already upgraded my firmware and read a bunch about it on the internet and have done everything necessary but my computer won't accept the module!!
    I really would like to know what is going on :/
    My specs:
    Macbook pro late 2008 unibody
    Version 10.8.5
    H2.4 GHZ Intel core 2 duo processor
    5 gb 1067 MHz DDR3 memory
    Model Identifier: MacBook5,1
    Boot ROM Version: MB51.007D.B03

    According to http://mactracker.ca database (free download) the MacBook Pro
    13-inch model identifier5.1 you've stated that you have, is Not as you've said.
    However, there was a 15-inch with the 5.1 model identifier.
    •How to identify MacBook Pro models
    Be sure to correctly identify the MacBook Pro model, and then get high quality
    RAM of proper specification of known good brand for Apple portables.
    Find an Example of correct spec RAM, by model & identifier; display size, build year:
    http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade
    The budget name brands seldom work well in Apple products; they do OK in some
    models of old computers or loose-spec PCs. OWC/macsales and crucial.com are
    two better known reputable suppliers of upgrade parts for Macs. Be sure to match
    the correct part to the exact spec for your computer.
    •How to identify MacBook models
    •The MacBook 13-inch (Aluminum Late 2008) -- is not a MacBook Pro:
    Model Identifier    MacBook5,1
    Model Number    A1278
    EMC    2254
    As such the RAM spec according to MacTracker is as follows:
    Maximum Memory    8.0 GB (Actual) 4.0 GB (Apple)
    Memory Slots    2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM
    OWC site points to this page for RAM. Double check detailed specs:
    http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3
    Good luck & happy computing!
    edited 2x

  • I did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

    i did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

    That does not work on model year older then 2010 and really doesn't work on any older then late 2011 models.
    You will need a set of original system dvd disc thjat are always sypplied with every mac sold before Lion came out. Systems older then late release early 2011 models.
    If you don't have them you kcan order a replacement set from apple by calling them. Have the serial number of you mac handy.

  • Macbook Pro Late 2008 Boot Issue

    Hello All!
    So I have an issue i would like to throw into the ring and see if I get any responses I have not thought of yet. Let me give you a quick backstory to my recent macbook adventures.... I will start with a quick prelude story.
    Chapter One:
    Purchased a used Macbook Pro, Late 2008 2.53ghz, 4gb DDR3 ram with no charger off ebay. And yes, I should know better. But honestly, it only had a cracked screen but still worked perfectly connected to an external monitor and i could not pass on the price of it.
    Chapter Two:
    After recieving my purchase, I determined that it was just a cracked cover over the LCD screen which is easily replaced, but the backlight was out on the LCD. So i ordered a new LCD. The new LCD did not fix my issue, which then pointed me to a problem on the motherboard. I then sent it out and had it repaired.
    Chapter Three:
    Upon recieving my newly repaired macbook, I installed a new SSD drive, battery and replaced the screen cover for the newly installed LCD. It looks Fantastic if I do say so myself! I then proceded to install lion and I have a perfect running Macbook Pro for less than 700 bucks after all was said and done.
    Chapter Four:
    Now, at this point you should know why I bought it... I use it for djing. That is it. There is nothing else on this. No apps, programs, or scripts. It has an updated lion OS on it and my serato itch Djing software. There isnt even any music on it as i store that on an external 3T WD elements drive. (I only installed an 80gb SSD for the OS system). Unfortunately i have had some instances where the Mac Pro has just shut down completely while im spinning! Not good for business!
    Chapter Five:
    Over the course of the last year I have noticed some things happening. Longer than normal boot times (especially since it has an SSD in it this seems wierd to me) and crashing of the Itch software while trying to analyze music or just not closing itch at all when im done playing a show and having to press and hold the power button to turn off the mac. Now for the kicker... Unbeknowst to me, apparently you cant use a 65W charger on a macbook that requires an 85W charger, this i just recently learned. The charger i was using was a 65W from a white 13 inch macbook 2006. I just recently aquired the 85W charger.
    This brings us to the present.....
    Here is the issue. I was analyzing my music files using itch, when suddenly & randomly one of the 2 analyzing indicators would just stop analyzing the track it was on... This leaves only one analyzer bar going and the other just stuck where it is (16000 songs will take awhile with only one analyzer going). If i stop analyzing and restart it, it picks up where it left off and continues for a bit and stops again, but its never the same track or same length of time before it stops analyzing. Now I have tried this with both Lion and Snow Leopard (the white macbook 2006 has snow) and it appears to happen with either OS.
    So I decided to install Snow on my Mac Pro 2008. For some reason, and I dont know why, it would not let me install snow to the partion I made on the drive. The disc would just keep rebooting the Mac pro over and over again. I know for a fact that snow works because I took the drive out of the white Macbook 2006 and put it into the Mac Pro 2008. Booted right up.
    So, I have re-installed itch on lion... Still has the same problem with lion.
    I have restored a copy of snow to the partioned hard drive of my Mac Pro 2008 from my white macbook 2006. This seems to be the only way to do this if i want snow on my Mac Pro 2008 since it won't boot Snow from disc or USB. Installed a new copy of itch, still the same problem.
    So my question is this.... Is it hardware or software?
    And to stop those from putting the obvious, I have done all the PVRAM, SMC etc resets!! I am not some 12yr old trying to make daddys computer work again because i used it like i shouldn't have. Im looking for something besides the obvious!
    Sorry, but I felt the entire story needed to be told in order to get the responses I'm looking for....
    And thanks for taking the time to read about my issues! Hopefully someone can point me in the direction I need to go to get this to stop doing what it's doing. I will be more than happy to answer any and all questions concerning this issue as best I can.

    The heat generated may be a function of what you are doing on the Internet.   Watching videos will stress the CPU/GPU and create heat and result in faster fan speeds.
    First try a SMC and PRAM resets:
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/PH14222?viewlocale=en_US
    If there is no change, post back.
    Ciao

  • Random hard freezing issues, Windows 8 64-bit on Macbook Pro (Late 2008)

    Hi,
    I recently upgraded to OS X 10.8.3 and got a hold on copy of Windows 8 64-bit. As I'm running on my old trustworthy 15 inch Macbook Pro (Late 2008), my hardware is officially unsupported. Over the years I've had XP, Vista, Win7 32-bit and 64-bit running running on the same machine, and thought I'd give Win8 a chance.
    To be able to install Win8 on my unsupported hardware, I tricked the Bootcamp assistant that I was going to install Win7, and after the reboot and start of the Win7 installation, I exited the installer, rebooted, switched DVD to Win8 and did the installation from there. So far so good. For installing the Bootcamp drivers, I followed the instructions in https://discussions.apple.com/thread/4894920?tstart=90.
    Now, the machine runs just fine with Windows 8, and I've installed some basic third party applications (Firefox, Spotify, Steam). However, I get completely random hard freezes on the machine (sound looping, no other activity whatsoever) during normal use. These can occur 20 minutes after start, or 3-4 hours in. The freezing behavior is very much similar to how my model can behave under overheating conditions (which mostly have occured in past Windows versions while gaming), however overheating doesn't seem to be the issue here (based on simple palpation ).
    Have anyone experienced a similar problem, or know something about it? My current idea is that some weird things are going on with the Bootcamp drivers, so unless anyone comes up with a suggestion I might try doing a rollback to the point before I installed the drivers to see what I can make of it.
    Thanks!

    Had a few similar short system freezes, after installing Windows 8 x64 on 13” MacBook Pro Mid-2010 with BootCamp 5.0.5033.
    There is a suggestion that DisableDynamicTick may fix the problem: https://discussions.apple.com/message/21565295#21565295. There were similar topics at Microsoft forums: 1, 2, 3. It was said “that this will likely reduce system battery life, so it should be undone when you update your Windows build or if it doesn't resolve your issue”, and that “this problem is resolved in the release versions of Windows 8”.
    Another possibility is that there is indeed a buggy driver, within BootCamp 5.0.5033, or a 3rd party, like a wireless network driver in the following case http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/system-fr eeze-randomly-after-installing-windows-8/49488183-26cf-4389-af21-a85dc366c99a?pa ge=2#LastReply.
    The problem has been noticeable on my MacBook, but not annoying enough yet to spend time troubleshooting. If you find a robust solution, using the links above or other method, it would be interesting to know.
    HTH

  • My macbook pro late 2008 randomly freeze

    Hi I recently upgrade my macbook pro Late 2008 by adding a 250 go Crucial SSD drive in the main harddrive spot. I also put a 1 To HDD in the place of the super drive.
    Since then, my macbook randomly freeze. I can't see any link to any specific usage. It just happen for no reasons. I had to reboot by holding the power button.
    Thanks for your help!
    Here is the informations I collect using the software "EtreCheck":
    Description du problème :
    L’ordinateur gèle sans raisons. Peu importe le moment ou l’intensité de l’utilisation.
    EtreCheck version: 2.1.8 (121)
    Report generated 18 avril 2015 13:21:13 UTC−4
    Télécharger EtreCheck à http://etresoft.com/etrecheck
    Cliquez sur les liens [Cliquer pour l’aide] pour l’assistance avec les produits non-Apple.
    Cliquez sur les liens [Détails] pour plus d'informations sur cette ligne.
    Informations matérielles : ℹ️
        MacBook Pro (15 pouces, fin 2008) (Caractéristiques techniques)
        MacBook Pro - modèle : MacBookPro5,1
        1 2.4 GHz Intel Core 2 Duo CPU : 2-core
        8 GB RAM Extensible
            BANK 0/DIMM0
                4 GB DDR3 1067 MHz ok
            BANK 0/DIMM1
                4 GB DDR3 1067 MHz ok
        Bluetooth: Vieux - Handoff/Airdrop2 pas disponible
        Wireless:  en1: 802.11 a/b/g/n
        La santé de la batterie : Normal - Comptage de cycles 155
    Informations vidéo : ℹ️
        NVIDIA GeForce 9400M - VRAM : 256 MB
        NVIDIA GeForce 9600M GT - VRAM : 256 MB
            Color LCD 1440 x 900
            SMBX2450 spdisplays_1080p
    Logiciel du système : ℹ️
        OS X 10.9.5 (13F34) - Temps depuis le démarrage : 0:7:8
    Informations des disques : ℹ️
        Crucial_CT256MX100SSD1 disk0 : (256,06 GB)
            EFI (disk0s1) <non monté>  : 210 Mo
            New Macintosh HD - SSD 2014 (disk0s2) /  : 255.72 Go (66.29 Go libre)
        ST1000LM024 HN-M101MBB disk1 : (1 TB)
            EFI (disk1s1) <non monté>  : 210 Mo
            Storage Macintosh  (disk1s2) /Volumes/Storage Macintosh   : 999.86 Go (942.51 Go libre)
    Informations USB : ℹ️
        Apple Inc. Built-in iSight
        Apple, Inc. Keyboard Hub
            Apple Inc. Apple Keyboard
        Brother HL-L2360D series
        Apple, Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
        Logitech USB Receiver
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
    Gatekeeper : ℹ️
        Mac App Store et développeurs identifiés
    Extensions du noyau : ℹ️
            /Library/Extensions
        [engagé]    com.Logitech.Control Center.HID Driver (3.9.1 - SDK 10.8) [Cliquer pour l’aide]
        [engagé]    com.movavi.driver.SoundGrabber (1.6.5 - SDK 10.6) [Cliquer pour l’aide]
            /System/Library/Extensions
        [désengagé]    com.IKMultimedia.driver.StompIO1 (1.0.0) [Cliquer pour l’aide]
        [engagé]    com.Logitech.Unifying.HID Driver (1.3.0 - SDK 10.6) [Cliquer pour l’aide]
        [désengagé]    com.caiaq.driver.NIUSBGuitarRigMobileDriver (2.4.23) [Cliquer pour l’aide]
        [désengagé]    com.caiaq.driver.NIUSBHardwareDriver (2.4.23) [Cliquer pour l’aide]
        [désengagé]    com.digidesign.iokit.DigiDal (8.0.1f1) [Cliquer pour l’aide]
        [désengagé]    com.digidesign.iokit.DigiIO (8.0.1f1) [Cliquer pour l’aide]
        [désengagé]    com.ikmultimedia.driver.StealthPedal (1.0.0) [Cliquer pour l’aide]
        [désengagé]    com.maudio.usb.fasttrackpro.driver (1.8.1) [Cliquer pour l’aide]
        [désengagé]    com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) [Cliquer pour l’aide]
        [désengagé]    com.seagate.driver.PowSecDriverCore (5.2.6 - SDK 10.4) [Cliquer pour l’aide]
            /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
        [désengagé]    com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) [Cliquer pour l’aide]
        [désengagé]    com.paceap.kext.pacesupport.panther (5.9 - SDK 10.-1) [Cliquer pour l’aide]
        [engagé]    com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) [Cliquer pour l’aide]
        [désengagé]    com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) [Cliquer pour l’aide]
            /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
        [désengagé]    com.seagate.driver.PowSecLeafDriver_10_4 (5.2.6 - SDK 10.4) [Cliquer pour l’aide]
        [désengagé]    com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6 - SDK 10.5) [Cliquer pour l’aide]
        [désengagé]    com.seagate.driver.SeagateDriveIcons (5.2.6 - SDK 10.4) [Cliquer pour l’aide]
    Éléments de démarrage : ℹ️
        HP IO : Chemin : /Library/StartupItems/HP IO
        Les éléments de démarrage sont obsolètes avec OS X Yosemite
    Daemons de lancement systèmes avec un problème : ℹ️
        [en marche]    com.seagate.TBDecorator.plist [Cliquer pour l’aide]
    Agents de lancement : ℹ️
        [désengagé]    com.adobe.AAM.Updater-1.0.plist [Cliquer pour l’aide]
        [en marche]    com.adobe.AdobeCreativeCloud.plist [Cliquer pour l’aide]
        [échec]    com.adobe.ARMDCHelper.cc24aef4a1b90ed56a...plist [Cliquer pour l’aide]
        [échec]    com.lexmark.bmlaunchd.plist [Cliquer pour l’aide]
        [échec]    com.lexmark.lexnetlaunchd.plist [Cliquer pour l’aide]
        [en marche]    com.Logitech.Control Center.Daemon.plist [Cliquer pour l’aide]
        [en marche]    com.m-audio.fasttrackpro.helper.plist [Cliquer pour l’aide]
        [engagé]    com.oracle.java.Java-Updater.plist [Cliquer pour l’aide]
    Daemons de lancements : ℹ️
        [en marche]    com.adobe.adobeupdatedaemon.plist [Cliquer pour l’aide]
        [engagé]    com.adobe.ARMDC.Communicator.plist [Cliquer pour l’aide]
        [engagé]    com.adobe.ARMDC.SMJobBlessHelper.plist [Cliquer pour l’aide]
        [engagé]    com.adobe.fpsaud.plist [Cliquer pour l’aide]
        [engagé]    com.oracle.java.Helper-Tool.plist [Cliquer pour l’aide]
        [engagé]    com.oracle.java.JavaUpdateHelper.plist [Cliquer pour l’aide]
        [en marche]    com.paceap.eden.licensed.plist [Cliquer pour l’aide]
        [engagé]    PACESupport.plist [Cliquer pour l’aide]
    Agents de lancement pour l’utilisateur : ℹ️
        [engagé]    com.adobe.AAM.Updater-1.0.plist [Cliquer pour l’aide]
        [engagé]    com.adobe.ARM.[...].plist [Cliquer pour l’aide]
        [engagé]    com.facebook.videochat.[expurgé].plist [Cliquer pour l’aide]
        [engagé]    com.google.keystone.agent.plist [Cliquer pour l’aide]
        [engagé]    com.valvesoftware.steamclean.plist [Cliquer pour l’aide]
    Éléments Ouverture : ℹ️
        Steam    Application  (/Applications/Steam.app)
        TimingHelper    UNKNOWN  (missing value)
        gfxCardStatus    Application  (/Applications/gfxCardStatus.app)
        Tabs    UNKNOWN  (missing value)
        AURecvAddHostSheet.nib    Document Caché (/System/Library/Components/CoreAudio.component/Contents/PlugIns/CoreAudioAUUI. bundle/Contents/Resources/ro.lproj/AURecvAddHostSheet.nib)
        Chronicle Mini    UNKNOWN  (missing value)
        MenuTab for Facebook    UNKNOWN  (missing value)
        ElementsAutoAnalyzer    Application  (/Applications/Adobe Elements 10 Organizer.app/Contents/ElementsAutoAnalyzer.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        NIHardwareAgent    Application Caché (/Library/Application Support/Native Instruments/Hardware/NIHardwareAgent.app)
        AdobeResourceSynchronizer    Application Caché (/Applications/Adobe Acrobat DC/Adobe Acrobat.app/Contents/Helpers/AdobeResourceSynchronizer.app)
        HP Scheduler    Application  (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
    Plug-ins internets : ℹ️
        Default Browser : Version : 537 - SDK 10.9
        Flip4Mac WMV Plugin : Version : 2.4.4.2 [Cliquer pour l’aide]
        iLokClientHelper : Version : 3.5 - SDK 10.5 [Cliquer pour l’aide]
        OfficeLiveBrowserPlugin : Version : 12.3.6 [Cliquer pour l’aide]
        AdobeAAMDetect : Version : AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Cliquer pour l’aide]
        FlashPlayer-10.6 : Version : 17.0.0.169 - SDK 10.6 [Cliquer pour l’aide]
        AdobePDFViewerNPAPI : Version : 15.007.20033 - SDK 10.8 [Cliquer pour l’aide]
        DivXBrowserPlugin : Version : 2.0 [Cliquer pour l’aide]
        Flash Player : Version : 17.0.0.169 - SDK 10.6 [Cliquer pour l’aide]
        LogMeIn : Version : 1.0.961 - SDK 10.7 [Cliquer pour l’aide]
        iPhotoPhotocast : Version : 7.0
        LogMeInSafari32 : Version : 1.0.961 - SDK 10.7 [Cliquer pour l’aide]
        AdobePDFViewer : Version : 15.007.20033 - SDK 10.8 [Cliquer pour l’aide]
        QuickTime Plugin : Version : 7.7.3
        RealPlayer Plugin : Version : Inconnu [Cliquer pour l’aide]
        Silverlight : Version : 5.1.30514.0 - SDK 10.6 [Cliquer pour l’aide]
        JavaAppletPlugin : Version : Java 8 Update 45 Vérifier la version
    Plug-ins internets pour l’utilisateur : ℹ️
        fbplugin_1_0_3 : Version : Inconnu [Cliquer pour l’aide]
    Extensions de Safari : ℹ️
        Searchme [Adware ! - Enlever]
        Antidote
        Amazon Shopping Assistant [Adware ! - Enlever]
        Ebay Shopping Assistant [Adware ! - Enlever]
    Panneaux de préférences tiers : ℹ️
        DivX  [Cliquer pour l’aide]
        Flash Player  [Cliquer pour l’aide]
        Flip4Mac WMV  [Cliquer pour l’aide]
        Java  [Cliquer pour l’aide]
        Logitech Control Center  [Cliquer pour l’aide]
        M-AudioFastTrackPro  [Cliquer pour l’aide]
        Native Instruments USB Audio  [Cliquer pour l’aide]
        Paragon NTFS for Mac ® OS X  [Cliquer pour l’aide]
    Time Machine : ℹ️
        Ignorer les fichiers du système : NON
        Sauvegarde automatique : OUI
        Disques sauvegardés :
            New Macintosh HD - SSD 2014 : Taille de disque : 255.72 Go Disque utilisé : 189.42 Go
        Destinations :
            MACintouch [Local]
            Taille totale : 499.76 Go
            Nombre de sauvegardes total : 29
            Sauvegardes la plus agée : 2013-11-18 17:57:27 +0000
            Dernière sauvegarde : 2015-04-16 16:37:30 +0000
            Taille de la disque de sauvegarde : Trop petit
                Taille de sauvegarde 499.76 Go > (Disque utilisé 189.42 Go X 3)
    L’utilisation du CPU par processus : ℹ️
             9%    WindowServer
             1%    mdworker
             0%    mds
             0%    fontd
             0%    AdobeCrashDaemon
    L’utilisation de la RAM par processus : ℹ️
        490 Mo    firefox
        120 Mo    com.apple.IconServicesAgent
        103 Mo    mds_stores
        94 Mo    Creative Cloud
        69 Mo    ocspd
    Informations de la mémoire virtuelle : ℹ️
        4.58 Go    RAM Disponible
        1.88 Go    RAM Active
        1.11 Go    RAM Inactive
        753 Mo    RAM Résidente
        758 Mo    Pages entrants
        0 o    Sorties pages
    Informations du diagnostic : ℹ️
        Apr 18, 2015, 01:13:39 PM    Examen de soi - succès
        Apr 17, 2015, 06:22:44 PM    /Users/[expurgé]/Library/Logs/DiagnosticReports/Empire Total War_2015-04-17-182244_[expurgé].crash
        Apr 6, 2015, 02:03:41 PM    /Library/Logs/DiagnosticReports/Kernel_2015-04-06-140341_[expurgé].panic [Click for details]

    Hi r.w.p & welcome to the forums...
    Some or all of the following may be necessary - try in this order:
    1. Try resetting your PRAM/NVRAM ( http://support.apple.com/kb/HT1379?viewlocale=en_US ). If everything isn't fixed, then continue to follow the steps here including resetting your SMC ( http://support.apple.com/kb/HT1411 ) if necessary.
    2. Use Font Book to eliminate all bad and duplicate fonts.
    3. Reinstall (or install for the first time) the .6.1 and .6.2 updates by downloading and installing the combo updater ( http://support.apple.com/kb/DL959 ).
    4. Reinstall 10.6 using your Snow Leopard install DVD by installing Snow over Snow using the upgrade method. Test your system after returning to 10.6. If is good there, then you may not want to re-install the.6.1 & .6.2 updates - if you do, then use the combo updater again ( http://support.apple.com/kb/DL959 ).
    Still no joy, take it to an Apple Store and ask staff there for assistance.

  • Focusrite Saffire 6 USB (1.1) with Macbook Pro late 2008

    Equipment-
         Macbook Pro Late 2008 w/ Yosemite 10.10.2
         Focusrite Saffire 6 USB (1.1)
    The Saffire 6 is a audio interface using USB 1.1 to connect microphones to my Macbook. It has 2 inputs and 4 outputs. I've had this unit for years and has worked fine. I realized today that I haven't used it since upgrading to 10.10 (Yosemite) and wasn't able to get it working. When I try to set it within Sound Preferences, all devices, In and Out, go blank, then come back constantly. It will even change Built-In Mic to "Unknown".
    The Saffire website (http://global.focusrite.com/usb-audio-interfaces/saffire-6-usb/downloads) lists two different driver choices to use, but one is labeled specifically for 10.8.5. The other just says "Mac". I'm certain my device is USB 1.1. If it were 2.0, I wouldn't need a driver. According to the website, I should use the 2.9 version.
    How can I check to see if all previous driver installations are clear?
    Is there anything I can check to make this thing work? The Focusrite website (http://us.focusrite.com/answerbase/are-focusrite-products-compatible-with-osx-yo semite) says that the Saffire 6 USB is compatible with Yosemite.
    I've emailed Focusrite and I'm hoping between them and this forum, I can get this working again.
    Thanks!!

    I've spoken to Focusrite. They had me try a number of things. I tried some of my own things.
    Different USB cable
    Deleted VodBurner device
    Repaired Permissions
    Installed/Uninstalled 3ivx codec
    Reset PRAM
    Performed Safeboot
    Removed Startup items
         Growl, Sizeup, Crossover CD Helper, Dropbox
         Disable MagicPrefs from Autostart
    Still not able to get it to work. The device will work on an XP computer but I don't have another Mac to try it out on. Any suggestions?

  • Macbook Pro late 2008 with Mavericks gets Grey screen of death.

    Hey guys..
    When Mavericks was released, I updated my old Macbook Pro (late 2008) 2.8ghz on work, and since then I have had a couple of Grey Screen of Deaths.
    I had none of those before Mavericks, so I guess thats the source of the problem.
    I've been trying to figure out what might cause it, from the crash log below, but I can't seem to figure anything from it, so I was hoping you guys could help me?
    Correct me if I'm wrong, but it seems to be a kernel panic, caused by some PowerManagement from kernel_task. But how do one fix that?
    Anonymous UUID:       E9D5B1C8-5DAD-BA79-D217-03BABC2E9B4C
    Wed Oct 30 12:06:40 2013
    panic(cpu 1 caller 0xffffff8011cdc19e): Kernel trap at 0xffffff7f93be996c, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0xffffef7f93c0f9b8, CR3: 0x0000000014a0a000, CR4: 0x0000000000000660
    RAX: 0x0ffffffb97da0000, RBX: 0xffffef7f93c0f9b0, RCX: 0x0000000000000001, RDX: 0x000000468263fc7f
    RSP: 0xffffff80f3a93d80, RBP: 0xffffff80f3a93e70, RSI: 0x0000006682634051, RDI: 0xffffff80f3afd148
    R8:  0x00000000e0000000, R9:  0x0000000000000005, R10: 0x000000000000081e, R11: 0xffffff8012289ce8
    R12: 0xffffff8024296800, R13: 0x0000000000000005, R14: 0xffffff80f3afd148, R15: 0xffffff7f93c0de20
    RFL: 0x0000000000010006, RIP: 0xffffff7f93be996c, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0xffffef7f93c0f9b8, Error code: 0x0000000000000002, Fault CPU: 0x1
    Backtrace (CPU 1), Frame : Return Address
    0xffffff80f3a93a10 : 0xffffff8011c22f69
    0xffffff80f3a93a90 : 0xffffff8011cdc19e
    0xffffff80f3a93c60 : 0xffffff8011cf3606
    0xffffff80f3a93c80 : 0xffffff7f93be996c
    0xffffff80f3a93e70 : 0xffffff7f93be8b89
    0xffffff80f3a93f30 : 0xffffff8011cdda5c
    0xffffff80f3a93f50 : 0xffffff8011c3757a
    0xffffff80f3a93f90 : 0xffffff8011c378c8
    0xffffff80f3a93fb0 : 0xffffff8011cd6aa7
          Kernel Extensions in backtrace:
             com.apple.driver.AppleIntelCPUPowerManagement(216.0)[A6EE4D7B-228E-3A3C-95BA-10 ED6F331236]@0xffffff7f93be6000->0xffffff7f93c10fff
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13A603
    Kernel version:
    Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
    Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
    Kernel slide:     0x0000000011a00000
    Kernel text base: 0xffffff8011c00000
    System model name: MacBookPro5,1 (Mac-F42D86C8)
    System uptime in nanoseconds: 19122757284543
    last loaded kext at 18516227224656: com.apple.driver.AppleUSBAudio          2.9.3f17 (addr 0xffffff7f94013000, size 303104)
    last unloaded kext at 18583595087255: com.apple.iokit.IOUSBMassStorageClass          3.6.0 (addr 0xffffff7f93fea000, size 69632)
    loaded kexts:
    com.cisco.kext.acsock          1.1.0
    com.apple.nke.rvi          2.0.0
    com.apple.filesystems.smbfs          2.0.0
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AGPM          100.14.11
    com.apple.filesystems.autofs          3.0
    com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleMikeyHIDDriver          124
    com.apple.driver.AppleHDA          2.5.2fc2
    com.apple.driver.AppleMikeyDriver          2.5.2fc2
    com.apple.driver.AppleSMCLMU          2.0.4d1
    com.apple.driver.AppleMuxControl          3.4.12
    com.apple.GeForceTesla          8.1.8
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleHWAccess          1
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleLPC          1.7.0
    com.apple.driver.SMCMotionSensor          3.0.4d1
    com.apple.driver.AppleUSBTCButtons          240.2
    com.apple.driver.AppleUSBTCKeyboard          240.2
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.driver.AppleIRController          325.7
    com.apple.iokit.SCSITaskUserClient          3.6.0
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.4.0
    com.apple.nvenet          2.0.21
    com.apple.driver.AppleUSBHub          650.4.4
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.driver.AirPort.Brcm4331          700.20.22
    com.apple.driver.AppleAHCIPort          2.9.5
    com.apple.driver.AppleUSBEHCI          650.4.1
    com.apple.driver.AppleUSBOHCI          650.4.1
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleSMBIOS          2.0
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
    com.apple.driver.AppleUSBAudio          2.9.3f17
    com.apple.AppleGraphicsDeviceControl          3.4.12
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.driver.DspFuncLib          2.5.2fc2
    com.apple.vecLib.kext          1.0.0
    com.apple.driver.AppleHDAController          2.5.2fc2
    com.apple.iokit.IOHDAFamily          2.5.2fc2
    com.apple.driver.AppleGraphicsControl          3.4.12
    com.apple.driver.AppleSMBusPCI          1.0.12d1
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.nvidia.classic.NVDANV50HalTesla          8.1.8
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.nvidia.classic.NVDAResmanTesla          8.1.8
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.iokit.IOAudioFamily          1.9.4fc11
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.iokit.IOSurface          91
    com.apple.iokit.IOBluetoothFamily          4.2.0f6
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.5.1d27
    com.apple.iokit.IONDRVSupport          2.3.6
    com.apple.iokit.IOGraphicsFamily          2.3.6
    com.apple.driver.AppleSMC          3.1.6d1
    com.apple.driver.AppleUSBMultitouch          240.6
    com.apple.iokit.IOUSBHIDDriver          650.4.4
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.driver.AppleUSBComposite          650.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.6.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
    com.apple.iokit.IOUSBUserClient          650.4.4
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IO80211Family          600.34
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.iokit.IOAHCIFamily          2.6.0
    com.apple.iokit.IOUSBFamily          650.4.4
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.driver.NVSMU          2.2.9
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.10
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          21
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.8
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.pthread          1
    com.apple.kec.corecrypto          1.0
    Model: MacBookPro5,1, BootROM MBP51.007E.B06, 2 processors, Intel Core 2 Duo, 2.8 GHz, 8 GB, SMC 1.33f8
    Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
    Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
    Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.0f6 12982, 3 services, 15 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: Hitachi HTS723232L9SA62, 320.07 GB
    Serial ATA Device: MATSHITADVD-R   UJ-868
    USB Device: Built-in iSight
    USB Device: Logitech USB Headset
    USB Device: BRCM2046 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Apple Internal Keyboard / Trackpad
    USB Device: IR Receiver
    Thunderbolt Bus:

    I am  having similair issues :  MBP 4.1  2008 
    It does not want to reboot at all .
    Stops with the grey screen .Spinning wheel / gear stops spinning  and Mac reboots automaticly to.... get stuck again .
    Ive tried the recovery : No automatic reboot  But same screen : ( grey , stuck stopped spinning wheel)   some how it enters Disk Utility  because I can trigger the voice that ask for the language etc.  (I left it there overnight  without result )  I dont see DU on screen  ( tried second monitor : No luck )
    Did a hardware test : No issues
    Did single user logon  :   fsck   : No problems with the drive ( after 2 runs ) ( 1st runs : changes were made )
    Did Logon Verbose status :  Initial messages :  shutdown reasons : code 128 ...   now followed by code 3
    Tried to reinstall the original OSX ( 2008 )   No luck : grey screen changes to darker screen coming in from the top asking to reboot the system .
    1st real bad signal was : When donwloading Maverick ( again )  to create a bootable USB  the screen started flickering ( this started when pressing the download button ???  - I had to reboot the mac to stop
    2 days later :
    Last Live activity with this mac was : Trying to create maverick Bootable  USB  using diskmaker X )   During this activty the mac died on me .
    I have a full time machine backup : so no worries about data...I hope  )
    This mac is one of the lucky ones with the bad NVDIA 8600m gt cards ... after upgrarding in march 2013 to Lion ..it crashed on me with the black screen of death ...Since apple stopped the guarantee I baked it in the oven at 200 c for 7 minutes  . For the last  months it was working Fine  .   ( Hardware check shows no issues  - and upon reboot it chimes happy ..)
    What could be my next options ?  ( Obvious buying a new one ... This  is allready launched as an idea .   I need more creative thoughts :-)

  • Audio Issues with MacBook Pro (Late 2008)

    I am seeing an occasional issue with my MacBook Pro (Late 2008). The Audio will go out... and instead you will just hear static-like clicking sounds when and audio even happens. For example... when you have the up/down volume notification on... and you change the audio volume.. you hear clicks. Or... when you open up a file that has audio.. you will hear the static-like click when the audio starts to try to play.
    The work around per-se is to completely shutdown and turn the notebook back on. A simple restart does not seem to fix it... it looks like the system needs to have a bit of energy drain first. Which... worries me that this is a hardware issue and not a driver issue.
    Wondering how many others are seeing this???

    I went to and Apple Support Center last week and I asked some questions about audio because my MBP was having troubles too. The tech told me audio issues are very frequent on these machines and sometimes you have to change a part of the soundcard. He also added you have to bring the MBP to a support center if you're having the problem several times - in my case I'm waiting the next "crash" since I had only 2 issues so far... If you're under warranty go for a check up and see if it really needs assistance. Goodbye

  • User Contributed Tips in the MacBook Pro (Late 2008) Power and Batteries

    *The following User Contributed Tips are located in the MacBook Pro (Late 2008) > Power and Batteries on a MacBook Pro (Late 2008) forum:*
    None at this time.
    *The following related tips are located in other areas of Apple Discussions:*
    neuroanatomist - Apple notebook batteries – maintenance and troubleshooting
    http://discussions.apple.com/thread.jspa?threadID=1764220
    Publish date: Oct 23, 2008
    Also see User Tips Library

    The management is quite easy. You can move your Documents, Movies, Music, and Pictures folders to another drive and then replace them in the original location with aliases.
    Select Mac Help from the Finder's Help menu and search for "alias." This will provide a help file on creating and using aliases.

  • MacBook Pro Late 2008 (Unibody) doesn't boot

    Hello,
    my good old MacBook Pro Late 2008 running Mountain Lion won't boot anymore. The sleep light does not light on, the green battery status indicator light is showing that the battery is full. I had this problem two or three times, and usually my Macbook comes magically back to life after one or two days.
    At the Apple store they said I'd have to make a SMC reset, and when they did it in the store, it worked. But it doesn't work for me (and I am sure I am doing the same thing, so maybe the Apple guy was just lucky – or is there another special trick?). What could be the solution to my problem?
    Unfortunately, I can't really tell the exact specifications, but it is the standard model, and I didn't change anything since. I just had the problem that it was getting really hot like half a year ago, but then I cleaned the fans and since then it was running rather fine (just sometimes froze).
    Any help greatly appreciated!
    Julian

    I've got the same, or almost the same problem on a MBP 2008 (late).
    MBP 15.4/2.53/2X2GB/320/SD/512VRAM upgraded to 8 GB 1067 DDR3 (OWC memory)
    In my case the computer works fine when I'm able to get it on. If it is turned off and the MagSafe charger disconnected then left that way for a few hours, and the MagSafe is re-connected, let it charge for a bit, it can often be turned on via the power button. HOWEVER, .....
    If it is left OFF overnight (Apple > Shut Down .... ), and the backlit keyboard goes dark, then a little pause before closing the lid, and left overnight, it will usually not be able to be turned on. The battery is in reasonably good condition (~+3500 mAh) and the newer battery (~ guess +5000 or more mAh) it doesn't do any better, and it won't turn on. Cycle count 183.
    Take the battery out, (disconnect the MagSafe first! Never have the MagSafe charging without a batter in the computer) wait half a minute, reinstall battery (I like the 5,1 because the back section can be easily removed to access the battery and the hard drive), attach the MagSafe charger then wait a bit (few minutes), and the computer can often be turned on the first time. If not the first time then repeat the process. Tried hitting the Power button with the battery off but that doesn't seem to change anything.
    Erased the HD (Hard Drive) and reinstalled Yosemite, have Fire Vault turned off, did a Utilities (Cmd + r ) check of the hardware (no problems), also did a few other tests - no problems. PRAM reset. Investigated BONJOUR - haven't gone into the Terminal yet. Would be nice to disable Bonjour without disabling DNS. https://www.apple.com/support/bonjour/ and http://apple.stackexchange.com/questions/151485/how-do-i-disable-bonjour-visibil ity-after-yosemite-install and http://forums.obdev.com/viewtopic.php?f=1&t=6106
    The Genius Bar tested it and couldn't find a problem. Suggested the Logic Board be replaced and that i$ expen$ive! I've investigated having the Logic Board repaired and that would cost around $150 + shipping. Won't do the oven trick. Other problem sources I've come across is the graphics chip (mainly on the 2008 (early) MBPs.
    Since erasing and reinstalling OS X Yosemite the computer really screams but I've started to reinstall some of the applications (FCPX & Motion), Documents, and Movie files. Still screams though! Nothing like a real cleaning of the hard drive. Didn't do a Time Capsule-type backup because I wanted to minimize "junk". The CanoScan LiDE 90 scanner won't work because Canon won't come up with a driver to work with Yosemite. Won't buy a Canon scanner again and didn't want to buy it to begin with due to a previous Canon problem. Bought a new Canon camcorder, $1,600 + tax, back when they had mini-tapes, it at the Maxwell tape but just outside the warranty period and wanted something around $500 to fix it. Turned out that was a typical problem.
    Really running out of options and ideas at this point. Hate to send it off to repair the Logic Board. Still looking for a software or setting fix.

Maybe you are looking for

  • Officejet Pro 8600 won't print PDF's

    Just bought a new OJP 8600 (3rd HP printer in a year, starting to get VERY frustrated). I've searched through all of the forums, all over the internet and cannot find a solution.  I'm on a Mac OSX 10.9.3. I can't print any PDF files either through Ac

  • Where are my albums?

    Upgraded to this new mac software and had problems with iPhoto. Didn't support my printer so had to buy a new one (not impressed). Husband had trouble getting iPhoto to work/print and had to reload library but now this new iPhoto (which i don't like

  • How to migrate a two node ISE installation to a six node ISE installation

    How do we migrate from a two node ISE installation where the primary ISE has IP address A and the secondary has IP address B to a six node ISE distributed installation with one primary admin ISE, one secondary admin ISE, one primary monitoring ISE, o

  • Adobe Encore crashes after creating New Project

    So something weird and unexpected happened so I'm telling the whole thing. I uninstalled Premiere Pro CC and installed Premiere Pro CS6 and the uninstalled it but unchecked Encore so that I can use Encore. I never used it before. So when I open Encor

  • Dynamically Load Subreport depends on Parameter?

    Hi I am wondering if it is possible to create a crystal report that includes a sub-reports section, which can load different subreport (.rpt) file into that section dynamically depends on the Parameter. E.g. @ReportID = 1 then it load abc.rpt as a su