Macbook Pro Late 2011 Grey screen

Hi pals,
I have a Macbook Pro Late 2011 since 2012. I've upgraded it to Yosemite, thing that I've to do from scratch because it worked very slow, but that's not the deal here.
The other day I started it, and it simply didn't do it. I've tried everything, like Unique user mode, safe mode, starting from dvd, reseting PMU-PRAM-NVRAM, changing hard disk, changing RAM,... everything I've found in the internet.
Only one thing worked once, and I say once, because it only worked once... I switch the HD and I used an USB to install Yosemite from scratch. It worked but when I reseted it, it never came alive again... That time, I used Disk Utility on Yosemite to format the original hard disk (700GB 7200rpm), and I recovered my personal data.
Now, when I try to start it from USB to install or from HD it never works. It shows the progress bar till 1/3 and then the screen becomes grey, the CPU heats and the fans start to spin like crazy. Sometimes it turns off, sometimes it doesn't and I have to do it.
Any help will be welcome, thank you .

The colored lines seem like it's a hardware graphics problem, likely brought on by the EFI firmware update that's been going around lately that exposed problems your hardware had you didn't know about.
Your going to have to bring this problem to Apple, I hope you have AppleCare because it's looking like a replacement logicboard and they are not cheap.
You can try exhausting the remedies in my User Tip, but those mostly deal with issues from the gray screen onwards, the colored lines represent a firmware issue and Apple doesn't release the newest versions online for self reinstall until they have proven themselves.
If your worried about sensitive data, you can order a tool kit from OtherWorld Computing, open the machine and remove the hard drive and use a SATA to USB connector to another Mac to remove data and scrub free space in Disk Utility.

Similar Messages

Macbook Pro (Late-2011) Grey Cross during Install

Hello.
MacBook Pro (Late-2011) version. Just installed a new Intel 520 Series 480 GB SSD drive to replace the 750GB drive that was in it.
Created a bootable USB Drive with Mountain Lion from the App Store (8GB SanDisk Ultra). When I try and boot from the drive, after about 45 seconds I get a grey crossout circle and it doesn't move from there.
I've used the same method of creating a bootable install drive before when I did a fresh install on the same computer of Mountain Lion, and on my Mac Mini.
So, is it the SSD that's causing the issue, or do I have a bad image?

This problem is from a faulty restore of the installer to the USB thumb drive. Try fully repartitioning it with Disk Utility and then try the restoration again. To repartition, select the drive device in Disk Utility, and then use the Partition tab and select "1 Partition" from the drop-down menu. Then click "Options" and ensure GUID is the partition scheme. Apply the changes, and try restoring the installer to the drive again.

MacBook Pro (late 2011) black screen, resolution issue.

Hi. Please excuse my spelling and grammar as I'm asking this on my phone.
I have a pretty big issue regarding my Late 2011 MacBook Pro (15inch). Every time I start it up, it shows the apple logo with the pinwheel fine, but after that it just goes black, but the computer is still on and functioning, but no matter what I press it remains black. However, if I plug it into an external monitor (via my thunderbolt to HDMI) the screen turns blue for a second and then comes on, and it works. If I pull it out the screen goes blue and then goes black. Also, if I open photobooth, the screen works on its own without the external monitor, and if I close it, it stops working again. I've found out by taking a screenshot when the screen is black that the resolution is 2048x1536 (when it's black), but when it'a plugged into an external monitor, the resolution is as it should be.
I have tried many things, such as restoring, using disk utility, replacing the harddrive with a spare, resetting the PRAM. I haven't come across anyone who has had a similar issue yet. Could you help me out?

Hi. Please excuse my spelling and grammar as I'm asking this on my phone.
I have a pretty big issue regarding my Late 2011 MacBook Pro (15inch). Every time I start it up, it shows the apple logo with the pinwheel fine, but after that it just goes black, but the computer is still on and functioning, but no matter what I press it remains black. However, if I plug it into an external monitor (via my thunderbolt to HDMI) the screen turns blue for a second and then comes on, and it works. If I pull it out the screen goes blue and then goes black. Also, if I open photobooth, the screen works on its own without the external monitor, and if I close it, it stops working again. I've found out by taking a screenshot when the screen is black that the resolution is 2048x1536 (when it's black), but when it'a plugged into an external monitor, the resolution is as it should be.
I have tried many things, such as restoring, using disk utility, replacing the harddrive with a spare, resetting the PRAM. I haven't come across anyone who has had a similar issue yet. Could you help me out?

My japanese macbook pro (late 2011) physical keyboard does not match with the on screen japanese keyboard in windows 8.1 so does caps lock

I am using windows 8.1 pro on my Japanese macbook pro (Late 2011) and enabled japanese language but the problem is that when i press caps lock (lower left corner) it changes the input method from english to japanese. I checked my on screen keyboard (OSK) in windows and its different from my physical keyboard i.e. keys are different on my physical keyboard compared to OSK. Can anyone help me?
Thanks
Tenadona

Can I suggest the following articles, which are worth reviewing?
Boot Camp: About keyboards and key assignment for Microsoft Windows - Apple Support
Boot Camp: Apple Wireless Keyboard keyboard mapping in Windows - Apple Support
Boot Camp: Windows commands on an Apple keyboard
Windows does require language packs to be installed, if you want the physical keyboard to match the on-screen keyboard.

I have a MacBook Pro Late 2011 and having issues with utilities screen.

I have a MacBook Pro Late 2011. I want to reformat my hdd to start from scratch. My issue is when I am on the utilities screen I am unable to click on anything. I want to delete my current partition but I am unable to click on Disk Utilities. Please help me!

According to your profile your Mac is running v10.7.3 Lion.
If that is the case, to reformat the hard drive you need to use Lion Recovery not Disk Utility.

MacBook Pro late 2011 screen goes blank and needs shutdown and superdrive spins 3 times before ejecting discs

Hi everyone,
I have a big problem with my MacBook Pro late 2011, suddenly while working without connecting the charger and it is 100% charged the screen would go black and I would need to hold the power button to shut it down and then power it up again, The second issue is the superdrive whenever I use a disc it spins it for 3 times before ejecting it to me, tried resetting PRAM and tried re-installing mac os x mavericks, but no solution so far and about the superdrive I bought a cleaner disc and tried to insert it, the superdrive would spin it 3 times and ejects it after that. Saw the disk permission solution and tried it once and I think there is a problem with that because this is the second time I try it and it was saying that there were problems.
Sorry for being long.
Thanks in advance.

Depending on what you are doing on the computer, how hard you are working the computer, it should not overheat. And if it does it should shut down or get very slow because when it starts to overheat the CPU will be throttled back to a lower Ghz speed and or just shut down so it doesn't cause damage to the CPU. The Kernel Panics are a sign that something else is going on. This could be software or hardware.
If after wiping the drives and reinstall Lion on the SSD if the system is running OK then the drives are fine, IE they are not bad. There is something else corrupting them. Again this could be hardware or software, but I doubt it is heat. And using the MBP ion clamshell mode should not cause overheating or excessive heating of either of the drives.
Have you installed iStat Pro or Menu and kept and eye on the temps? If not install iStat Pro and keep and eye on the temps. I bet they do not get above the 150°- 180°F mark which although hot is not overheating.
Be very careful when calling Apple. Removing the DVD drive and installing a hard drive in that bay could void your warranty. The DVD is not a User Removable part and Apple frowns on doing that. So if you call them do not mention that you have replaced the DVD drive with another HDD.
Honestly I suspect you have a hardware problem. But the only way to know that is to install just Lion and your basic programs and run the system. Leave out any AV type software, if you are running some. If you don't get any kernel panics thenn install some of your other software, one programm at a time. If with just the OS and basic software you get a kernel panic then it is hardware related and needs to be checked out by Apple. If you do that re-install the DVD and the original HDD with just the OS on it before you take it in.

When my MacBook pro late 2011 wakes from sleep i have it set to make me enter my password, but when that pace comes up the resolution of it is smaller than my screen. Why is this happening?

When my MacBook pro late 2011 wakes from sleep i have it set to make me enter my password, but when that pace comes up the resolution of it is smaller than my screen. Why is this happening?

I was at the Apple Service. The problem was the 750Gb Toshiba HDD. It's incredible what noise can make that little thing
I didn't know the hdd position is on left on MBP 17" , I thought is the same position like MBP15"
I did't lose any kind of data.. it was fix on time.
Anyway, thank u guys....and don't forget that noise !!!
P.S. I'll make a song with that noise sample to remember it

Both Internal hard drives fail on Macbook Pro late-2011

Both internal hard drives (SSD and HDD) failed on Macbook Pro late-2011.
Setup: MBP closed with Thunderbolt display attached.
Problem on HDD-A
I called Apple Support to log an issue with my MBP2011. The system is made up of 2 drives - SSD (128GB) and HDD with 2 partitions HDD-A and HDD-B(original 750GB).
HDD-A has LionOSX 10.7 and HDD-B is storage. SSD has LionOSX on it as well. I normally boot HDD-A.
I was working on HDD-A and the Kernel Panic screen appeared prompting me to shutdown the machine and start it up again.
I tried to reboot HDD-A and the grey progress bar appeared for a long time. I then forced shutdown and rebooted into SSD.
I was able to boot from SSD and then I opened Disk Utility to check the drives. I verified the disk for HDD-A and there was an error. I then tried to repair disk and it couldn't repair it. A dialogue said the disk could not be repaired and that data should be backed up.
HDD-A was not visible in Finder but HDD-B was accessible.
I verified HDD-B and it was "ok".
I shutdown, booted from SSD, disk utility HDD-A and the same message occurred.
I called Apple Support and they advised that I boot from my external HDD which was a clone of HDD-A.
Solution
I was successfully able to boot from the Clone HDD-A.
HDD-A was able to be accessed and I could retrieve the files from HDD-A.
I copied over the latest files from HDD-A to an external drive.
Same Problem on SSD
Boot from SSD, i started working for about 3 hours, with the lid closed, and attached to the ACD.
Kernel Panic screen happened again on the SSD.
Couldn't boot boot from either SSD or HDD-A.
I booted from Cloned HDD-A, Disk Utility verify and repair returned errors on SSD. The same issue had occurred on the second drive.
Disk Recovery from a boot recovery USB thumb, Disk Utility, erased SSD, verify was ok.
Tried to install then there was an install error saying that SSD was damaged (large triangle warning icon). Tried 3 times, failed.
Boot from Recovery Drive HDD-A, downloaded LionOSX.
Next steps
Format HDD-A and HDD-B into 2 partitions
Install LionOSX on HDD A.
Note:
I did not do any software updates for about a week before 14.04.2012 and suspect it might be due to the virus.
I normally work with the lid closed and attached to the ACD, I also suspect that overheating caused both drives to fail. However, I have been using this system with the lid closed for atleast a week. One Kernel Panic screen occured.

Depending on what you are doing on the computer, how hard you are working the computer, it should not overheat. And if it does it should shut down or get very slow because when it starts to overheat the CPU will be throttled back to a lower Ghz speed and or just shut down so it doesn't cause damage to the CPU. The Kernel Panics are a sign that something else is going on. This could be software or hardware.
If after wiping the drives and reinstall Lion on the SSD if the system is running OK then the drives are fine, IE they are not bad. There is something else corrupting them. Again this could be hardware or software, but I doubt it is heat. And using the MBP ion clamshell mode should not cause overheating or excessive heating of either of the drives.
Have you installed iStat Pro or Menu and kept and eye on the temps? If not install iStat Pro and keep and eye on the temps. I bet they do not get above the 150°- 180°F mark which although hot is not overheating.
Be very careful when calling Apple. Removing the DVD drive and installing a hard drive in that bay could void your warranty. The DVD is not a User Removable part and Apple frowns on doing that. So if you call them do not mention that you have replaced the DVD drive with another HDD.
Honestly I suspect you have a hardware problem. But the only way to know that is to install just Lion and your basic programs and run the system. Leave out any AV type software, if you are running some. If you don't get any kernel panics thenn install some of your other software, one programm at a time. If with just the OS and basic software you get a kernel panic then it is hardware related and needs to be checked out by Apple. If you do that re-install the DVD and the original HDD with just the OS on it before you take it in.

Osx 10.8.4 does not run macbook pro late 2011

does any have issues after installing osx 10.8.4??? because i have an issue after i update my macbook pro late 2011 ,it doesn't start and only stay on the mac logo and appears the pointer i restarted many times and does not work the only option i had is to reinstall the osx 10.8.3. can anybody help me with this issue?? thank you.

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

MacBook Pro Late 2011 10.7.5 won't detect external monitor

Hello,
I have a Macbook Pro Late 2011 13" Running OSX Lion 10.7.5. It won't flash blue at ALL when connected to an external display. Under system report, it shows that the "Link Status" is 7. The same setup works with another MacBook Pro Mid 2009 15 inch. I am under AppleCare, should I take it in? Weird. All firmware updates are completed, no "Air Display" type programs are installed currently, and gfxcardstatus is also installed and doesn't really help.

Looks like a problem with the GPU (possibly the screen, but it looks more as if it's the GPU). If I were you, I'd take your machine into your local Apple Store or an AASP and have it diagnosed.
Clinton

Macbook Pro (Late 2011) Won't read game

My Macbook Pro (Late 2011) plays dvds (I used Family guy to test) but will not read the disk for Football Manager 2015 despite it being Mac compatible. THe disk itself runs on PC so isn't faulty. Any thoughts?
Processor 2.4 GHz Intel Core i5
Memory 4 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
Software Mac OS X Lion 10.7.5 (11G63b)

Thanks, OrangeMarlin. Lots to learn about in land of the Macs.
Point taken on the driver. The reason I'm hesitant to assume it's power related is because everything else works. Here is a short list of other devices I've used it for in the week or so I've owned this machine:
iPad (connected fine and charged iPad to full)
Seagate GoFlex (connects fine, but this device also uses wall power)
Samsung Spinpoint HDD (in an aluminum Rosewill enclosure, also uses wall power)
iPod Classic (fifth gen, 30GB), also charges
Samsung Captivate (Android phone), charges
I got this machine from the Apple store last week, when I swapped out my original purchase MBP due to a screen defect. I asked them to run a gamet of tests to ensure everything OK, and they complied (at least claimed to). I assume if I brought it back, with the drive, they would be able to test for a power issue, correct?
Thanks again.

My MacBook Pro shows a grey screen at start-up how do I fix this problem?

My MacBook Pro shows a grey screen when I try to login and won't go onto my homepage. Why has this happened and how do I fix it?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Macbook Pro (Late 2011 model issue)

I purchased my Macbook pro (late 2011 Model) a couple of months back, towards the end of last year. Staright after i had purchased it, and had got it delivered i experienced cracking and clicking noises coming from within the Hinge of the Macbook. And got it replaced for a brand new one as i was still within the 2 weeks prior to purchase, as the apple policy states i was eligible to get a new if i had any problems. So i did. And the brand new replacement macbook pro that i have NOW has the same problem. Ever since i got the other one replaced THIS ONE has the problem or rather much worse, Cracking and clicking noises everywhere whenever i handle the notebook or carry it there is cracking noises everywhere. Whenever i open and close the screen lid, UP or Down. There is loud clicking noises coming from inside, sounds like something is breaking. This is totally unacceptable. First macbook had issue, replaced it, And now replaced Macbook pro is much worse. Since i had it replaced i havent had time to come bring it in. It still bears the same preoblem and is getting worse!

You're just going to have to take it into your local Apple Store. They won't replace again but you're still within your one-year warranty so they will certainly repair. I have the same model and have not have any of the problems that you describe.
Regards,
Clinton

Graphic problem in 13'' macbook pro late 2011

I have problem with my 13'' i7 macbook pro (late 2011) . for instance when i swipe up/down with 4 fingers, my apps or docs minimize So logy and slowly as well as when i want full screen my browser or other application, it do it very bad with some vibration and i dont know what do i have to do?
is this problem for my graphic card or is for Lion ios?
as the matter of fact , i bough this mac 2 months ago.
Im wondering if someone can help me in this regard!

Since it is less than a year old call AppleCare: 800-SOS-APPL (in the US).
Have your Mac's serial number ready: http://support.apple.com/kb/HT1349
After you wait on hold for a very long time they ask you some frustratingly basic questions like is it charged and did you spill water on it etc., they will talk you through some basic troubleshooting such as an SMC reset. In the end they will offer to schedule an appointment at a Genius Bar where they will fix whatever is wrong. It won't cost you anything (unless you spilled water on it etc).
You can do all this yourself:
SMC reset:
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Genius Bar Reservations:
http://www.apple.com/retail/geniusbar/
You can test the hardware yourself also, if it reports something wrong tell them what it is.
Using Apple Hardware Test:
http://support.apple.com/kb/HT1509

After upgrading to yosemite my macbook pro late 2011 does a random sound from time to time.

After upgrading to yosemite my macbook pro late 2011 does a random sound from time to time. Its completely random and i already checked all apps in use and its not from them.

Sounds like Notifications app.
Maybe some other app. In SystemPreferences->Users&Groups->LoginItems tab: remove all entries with the minus sign underneath. This will not uninstall anything, you have to start those apps by hand now. Restart.
Still there?
Yes: Restart again while holding the shift key, this will start the mac in SafeMode: only the necessary items are loaded to run.
Still there?
Yes: Make an etrecheck list and post it here.
No: Restart, put the items in the LoginItems back, one by one, restart after each entry, and you will find the "culprit"
Please report accordingly. I will be back in 24 hours.

Macbook Pro Late 2011 Grey screen

Similar Messages

Maybe you are looking for