MacBook Pro late 2013 does not show login window after waking from sleep

MacBook Pro late 2013 does not always prompt for login, but opens directly to desktop, even though security settings are setup to prompt for password after 5 minutes. Up to now, this only has happened on battery, machine goes to sleep or lid is closed, 10 minutes pass, lid is opened and desktop is shown instead of lock screen. Console shows, that the machine was actually sleeping (10 min no log entries) and also does not show any error in regards to login window.
This behaviour occurs randomly and I could not track down any root cause/behaviour, yet. Sometimes everything behaves as it should.
Any ideas?
Thanks
marcus

Count me in, I have the same issue, and from what I read here, it looks like a Yosemite/SSD related issue ?
I'm not 100% sure if it started when I put a SSD in my old iMac 2009 (as a fusion drive) or if that's after that when I upgraded to Yosemite...
I did disable auto poweroff like suggested in another thread : Mac freeze during the night sleep.
sudo pmset -a autopoweroff 0
We'll see if it helps.
It happens toughly a couple of times a week.

Similar Messages

MacBook Pro, late 2013 will not start up on battery.

Why won't my MacBook Pro (Retina, 13", late 2013) start up on battery, even though it's charged 100%? I can start it up with the power cord, then disconnect the cord and it runs fine and the battery doesn't seem to run down too quickly. I just downloaded OS X Yosemite 10.10.3 last night and this started today. Any help?

Try a SMC reset:
https://support.apple.com/en-us/HT201295
Ciao.

MacBook Pro with Yosemite freezes on the login window after being woken up from sleep.

Hi,
my early 2011 MacBook Pro freezes when it's woken up from sleep mode. I have to force power down the macbook and do a fresh boot. I recently installed a SSD and did a fresh yosemite install from a USB thumb drive.
EtreCeck:
EtreCheck version: 2.0.10 (97)
Bericht vom 1. November 2014 22:50:42 MEZ
Hardware-Informationen: ℹ️
MacBook Pro (13 Zoll, Anfang 2011) (Verifiziert)
MacBook Pro - Modell: MacBookPro8,1
1 2.7 GHz Intel Core i7 CPU: 2-core
8 GB RAM Nachrüstbar
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Älter - Handoff/Airdrop2 nicht unterstützt
Wireless: en1: 802.11 a/b/g/n
Video Informationen: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
Acer H236HL spdisplays_1080p
System-Software: ℹ️
OS X 10.10 (14A389) - Laufzeit: 0:14:59
Festplatteninformationen: ℹ️
Samsung SSD 850 PRO 256GB disk0 : (256,06 GB)
S.M.A.R.T. Status: Verifiziert
EFI (disk0s1) <nicht sichtbar> : 210 MB
Recovery HD (disk0s3) <nicht sichtbar> [Erholung] : 650 MB
SSD (disk2) / [Startup] : 254.83 GB (184.38 GB frei)
Core Storage: disk0s2 255.20 GB Online
Hitachi HTS547550A9E384 disk1 : (500,11 GB)
S.M.A.R.T. Status: Verifiziert
EFI (disk1s1) <nicht sichtbar> : 210 MB
Recovery HD (disk1s3) <nicht sichtbar> [Erholung] : 650 MB
HDD (disk3) /Volumes/HDD : 498.88 GB (334.08 GB frei)
Core Storage: disk1s2 499.25 GB Online
USB-Informationen: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Microsoft Wired Keyboard 600
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Informationen: ℹ️
Apple Inc. thunderbolt_bus
Konfigurationsdateien: ℹ️
/etc/hosts - Graf: 31
Gatekeeper: ℹ️
Mac App Store und verifizierte Entwickler
Kernel-Erweiterungen: ℹ️
/Library/Extensions
[nicht geladen] com.caiaq.driver.NIUSBHardwareDriver (2.6.0 - SDK 10.8) Unterstützt
[nicht geladen] com.caiaq.driver.NIUSBMaschineControllerDriver (2.6.0 - SDK 10.8) Unterstützt
Start-Agents: ℹ️
[nicht geladen] com.adobe.AAM.Updater-1.0.plist Unterstützt
[geladen] com.epson.esua.launcher.plist Unterstützt
[ungültig?] com.teamviewer.teamviewer.plist Unterstützt
[ungültig?] com.teamviewer.teamviewer_desktop.plist Unterstützt
Start-Daemons: ℹ️
[geladen] com.adobe.fpsaud.plist Unterstützt
[ungültig?] com.adobe.SwitchBoard.plist Unterstützt
[geladen] net.freemacsoft.LiteIcon.LIHelperTool.plist Unterstützt
Benutzer Start-Agents: ℹ️
[geladen] com.adobe.AAM.Updater-1.0.plist Unterstützt
Anmeldeobjekte: ℹ️
Flux Programm (/Applications/Flux.app)
iTunesHelper Programm (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Alfred 2 UNKNOWN (missing value)
Internet Plug-Ins: ℹ️
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Unterstützt
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Unterstützt
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 10.1.12 Unterstützt
AdobePDFViewer: Version: 10.1.12 Unterstützt
Flash Player: Version: 15.0.0.189 - SDK 10.6 Unterstützt
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Version prüfen
Safari Extensions: ℹ️
AdBlock
Einstellungskarten von Drittanbietern: ℹ️
Flash Player Unterstützt
Native Instruments USB Audio Unterstützt
Time Machine: ℹ️
Überspringen Systemdateien: NEIN
Mobil Sicherungskopie: AUS
Automatische Sicherungskopie: NEIN - Automatische Sicherungskopie ausgeschaltet
Gesicherte Platten:
HDD: Festplattengröße: 498.88 GB Disk verwendet: 164.80 GB
Sicherungsziele:
TimeMachine [Network]
Gesamt Größe: 3 TB
Gesamtzahl der Sicherungskopie: 17
Älteste Sicherungskopie: 2014-08-03 17:35:39 +0000
Letzten Sicherung: 2014-10-24 11:15:03 +0000
Größe der Sicherungsplatte: Hervorragend
Größe der Sicherungsplatte 3 TB > (Disk Größe 498.88 GB X 3)
Top Prozesse von der CPU: ℹ️
      10% mds
      8% WindowServer
      1% hidd
      1% Safari
      0% fontd
Top Prozesse vom Speicher: ℹ️
241 MB Safari
189 MB mds_stores
137 MB com.apple.WebKit.WebContent
103 MB softwareupdated
94 MB Console
Informationen zum virtuellen Speicher: ℹ️
4.35 GB Freier RAM
2.36 GB Aktive RAM
478 MB Inaktive RAM
1.40 GB Wired RAM
1.05 GB Seite-ins
0 B Seite-outs
Here is the console log from a recent freeze:
01.11.14 21:03:08,000 kernel[0]: sleep
01.11.14 21:03:08,000 kernel[0]: Wake reason: EHC2
01.11.14 22:35:05,000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
01.11.14 22:35:05,000 kernel[0]: Previous sleep cause: 5
01.11.14 22:35:05,000 kernel[0]: The USB device HubDevice (Port 1 of Hub at 0xfa000000) may have caused a wake by issuing a remote wakeup (2)
01.11.14 22:35:05,000 kernel[0]: AppleThunderboltGenericHAL::earlyWake - complete - took 1 milliseconds
01.11.14 22:35:05,000 kernel[0]: The USB device BRCM2070 Hub (Port 1 of Hub at 0xfa100000) may have caused a wake by issuing a remote wakeup (3)
01.11.14 22:35:05,000 kernel[0]: TBT W (1): 0 [x]
01.11.14 22:35:05,000 kernel[0]: AppleUSBMultitouchDriver::validateChecksum - 512-byte packet checksum is incorrect (expected 0x47b, checksum bytes were 0xdead)
01.11.14 22:35:05,000 kernel[0]: wlEvent: en1 en1 Link DOWN virtIf = 0
01.11.14 22:35:05,000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
01.11.14 22:35:05,000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
01.11.14 22:35:05,000 kernel[0]: en1: 802.11d country code set to 'X3'.
01.11.14 22:35:05,000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
01.11.14 22:35:05,140 sharingd[250]: 22:35:05.140 : SDStatusMonitor::kStatusWirelessPowerChanged
01.11.14 22:35:05,147 discoveryd[48]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 8.8.8.8 Port 53 errno 50, fd 46, ErrLogCount 1 ResolverIntf:0
01.11.14 22:35:05,148 discoveryd[48]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 8.8.8.8 Port 53 errno 50, fd 46, ErrLogCount 2 ResolverIntf:0
01.11.14 22:35:05,148 discoveryd[48]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 8.8.8.8 Port 53 errno 50, fd 46, ErrLogCount 3 ResolverIntf:0
01.11.14 22:35:05,148 discoveryd[48]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 8.8.8.8 Port 53 errno 50, fd 46, ErrLogCount 4 ResolverIntf:0
01.11.14 22:35:05,149 discoveryd[48]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 8.8.8.8 Port 53 errno 50, fd 46, ErrLogCount 5 ResolverIntf:0
01.11.14 22:35:05,153 UserEventAgent[16]: Captive: CNPluginHandler en1: Inactive
01.11.14 22:35:05,154 configd[25]: network changed: v4(en0:192.168.178.30, en1-:192.168.178.22) DNS* Proxy SMB
01.11.14 22:35:05,156 discoveryd[48]: Basic Warn DD_Warn: Corrupt NSEC RDATA size
01.11.14 22:35:05,154 networkd[156]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache
01.11.14 22:35:05,000 kernel[0]: The USB device Bluetooth USB Host Controller (Port 3 of Hub at 0xfa110000) may have caused a wake by issuing a remote wakeup (3)
01.11.14 22:35:05,000 kernel[0]: full wake promotion (reason 1) 241 ms
01.11.14 22:35:05,214 watchdogd[200]: [watchdog_daemon] @( pm_callback) - ref=0x0 msg_type=0xe0000320 msg=0x0
01.11.14 22:35:05,234 hidd[68]: MultitouchHID: device bootloaded
01.11.14 22:35:05,446 discoveryd[48]: Basic Bonjour,Warn Warning: IPv6 listener multicast send failed en1, 49
01.11.14 22:35:05,560 sharingd[250]: 22:35:05.559 : SDStatusMonitor::kStatusWirelessPowerChanged
01.11.14 22:35:05,588 sharingd[250]: 22:35:05.588 : SDStatusMonitor::kStatusWirelessPowerChanged
01.11.14 22:35:05,611 sandboxd[283]: ([29]) airportd(29) deny file-read-metadata /Library/Preferences/com.apple.security-common.plist
01.11.14 22:35:05,620 sandboxd[283]: ([29]) airportd(29) deny file-read-data /Library/Preferences/com.apple.security-common.plist
01.11.14 22:35:05,000 kernel[0]: MacAuthEvent en1 Auth result for: 58:6d:8f:ae:80:e9 MAC AUTH succeeded
01.11.14 22:35:05,000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
01.11.14 22:35:05,000 kernel[0]: AirPort: Link Up on en1
01.11.14 22:35:05,000 kernel[0]: en1: BSSID changed to 58:6d:8f:ae:80:e9
01.11.14 22:35:05,000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
01.11.14 22:35:05,000 kernel[0]: AirPort: RSN handshake complete on en1
01.11.14 22:35:06,666 WindowServer[137]: CGXDisplayDidWakeNotification [3660674748260]: posting kCGSDisplayDidWake
01.11.14 22:35:06,667 WindowServer[137]: handle_will_sleep_auth_and_shield_windows: Reordering authw 0x7f8e4d73e0e0(2004) (lock state: 3)
01.11.14 22:35:06,667 WindowServer[137]: handle_will_sleep_auth_and_shield_windows: err 0x0
01.11.14 22:35:06,926 networkd[156]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache
01.11.14 22:35:06,927 configd[25]: network changed: v4(en0:192.168.178.30) DNS* Proxy SMB
01.11.14 22:35:06,928 UserEventAgent[16]: Captive: [CNInfoNetworkActive:1709] en1: SSID 'Desperate Housewifi' making interface primary (cache indicates network not captive)
01.11.14 22:35:06,929 UserEventAgent[16]: Captive: CNPluginHandler en1: Evaluating
01.11.14 22:35:06,934 UserEventAgent[16]: Captive: en1: Not probing 'Desperate Housewifi' (cache indicates not captive)
01.11.14 22:35:06,935 UserEventAgent[16]: Captive: CNPluginHandler en1: Authenticated
01.11.14 22:35:06,936 configd[25]: network changed: v4(en0:192.168.178.30, en1!:192.168.178.22) DNS Proxy SMB
01.11.14 22:35:06,943 networkd[156]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache
01.11.14 22:35:06,000 kernel[0]: en1: BSSID changed to 58:6d:8f:ae:80:e9
01.11.14 22:35:06,954 sharingd[250]: 22:35:06.953 : SDStatusMonitor::kStatusWirelessPowerChanged
01.11.14 22:35:08,023 discoveryd[48]: Basic Bonjour Failed to delete registration recordId=21 error=4
01.11.14 22:35:12,885 discoveryd[48]: Basic DNSResolver UDNSServer:: PowerState is Wakeup
01.11.14 22:35:14,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,2301,0de1,0300,cde1,3c00]
01.11.14 22:35:14,772 ntpd[749]: wake time set +0.196458 s
01.11.14 22:35:14,850 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
01.11.14 22:35:14,886 com.apple.iCloudHelper[799]: objc[799]: Class FALogging is implemented in both /System/Library/PrivateFrameworks/FamilyCircle.framework/Versions/A/FamilyCircle and /System/Library/PrivateFrameworks/FamilyNotification.framework/Versions/A/FamilyNotification. One of the two will be used. Which one is undefined.
01.11.14 22:35:14,898 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
01.11.14 22:35:15,561 CalendarAgent[216]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
01.11.14 22:35:15,616 CalendarAgent[216]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
01.11.14 22:35:16,181 CalendarAgent[216]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/plain; charset="utf-8"].]
01.11.14 22:35:16,334 CalendarAgent[216]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/plain; charset="utf-8"].]
01.11.14 22:35:20,013 com.apple.iCloudHelper[799]: AOSKit WARN: APS timeout encountered (cxn initialization)
01.11.14 22:35:20,013 com.apple.iCloudHelper[799]: AOSKit WARN: Failed to get response from APSConnection's initialization method(s)
01.11.14 22:35:26,000 kernel[0]: en1: 802.11d country code set to 'DE'.
01.11.14 22:35:26,000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
01.11.14 22:35:26,363 AddressBookSourceSync[797]: Stream 0x7ff1e3628fb0 is sending an event before being opened
01.11.14 22:35:26,419 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
01.11.14 22:35:31,000 kernel[0]: MacAuthEvent en1 Auth result for: 58:6d:8f:ae:80:e9 MAC AUTH succeeded
01.11.14 22:35:31,000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
01.11.14 22:35:31,000 kernel[0]: AirPort: RSN handshake complete on en1
01.11.14 22:35:31,000 kernel[0]: wl0: Roamed or switched channel, reason #8, bssid 58:6d:8f:ae:80:e9
01.11.14 22:35:31,000 kernel[0]: en1: BSSID changed to 58:6d:8f:ae:80:e9
01.11.14 22:35:31,000 kernel[0]: en1::IO80211Interface::postMessage bssid changed

Count me in, I have the same issue, and from what I read here, it looks like a Yosemite/SSD related issue ?
I'm not 100% sure if it started when I put a SSD in my old iMac 2009 (as a fusion drive) or if that's after that when I upgraded to Yosemite...
I did disable auto poweroff like suggested in another thread : Mac freeze during the night sleep.
sudo pmset -a autopoweroff 0
We'll see if it helps.
It happens toughly a couple of times a week.

New Mac Book Pro does not ask for password when waking from sleep

I've noticed that several others are having this problem. I have tried all of the suggestions on the other posts and have had no luck getting it to work.
I have it set to "require password to wake this computer from sleep or screensaver".
When I wake the computer in the morning it requires a password but if I wake it after and hour or two it does not. I have my screensaver set to turn on after 4 minutes but it never asks for a password when when I come back to my computer.
I think this is a bug and Apple should deal with it in a security update.
I'm open to any more suggestion though.
Thanks,
Tevadar

FYI, you can also lock your screen manually if you like. Launch Applications > Utilities > Keychain Access, select Keychain Access menu > Preferences > General tab, and check the box to "Show Status in Menu Bar." That places a padlock icon in your menu bar, and clicking on that will give you the option to Lock Screen.

MacBook Pro airport doesn't choose 5 GHz network when waking from sleep

Hi,
I recently set up a Time Capsule [TC] 802.11n (4th Gen) as my airport base station catering for my MacBook Pro [MBP], iPad (1st Gen), iPod (3rd Gen) and BlackBerry 9900. I have it set up in dual-band mode (2.4/5 GHz) with the same SSID, mainly hoping to take advantage of the increased speed of the 5GHz band during Time Machine backups - I get a Transmit Rate of 300 Mbit/s when connected at 5 GHz and 145 MBit/s at 2.4 GHz. Aside from that I don't really care which it chooses to be honest - my internet connection is only 12 Mbit/s. When I start up my MBP from a full shut down within an 'appropriate' distance from the TC, AirPort automatically selects the 5 GHz band and falls back to 2.4 GHz if I stray too far.
The problem arises when I wake my MBP from a sleep (which is pretty much always having closed the lid each time I'm done using it) and AirPort ALWAYS selects the 2.4 GHz band and will never change to the 5 GHz band unless I fully disconnect from the network and then reconnect.
The iPad and BlackBerry both switch happily between the two bands as I move around the house, opting for the 5 GHz when possible and always without intervention so the set-up obviously works.
I think it's a problem in Snow Leopard having read problems around the internet from users who have upgraded from Leopard to SL, most of whom seem to do what I'm thinking, i.e. setting up a different name for the 5 GHz network and putting it higher in the priority list that the 2.4 GHz one, however the solution isn't ideal/elegant and certainly not how it's supposed to work, but I've yet to find a definitive solution from Apple anywhere.
Anyone else having this problem? Anyone found a solution? Anyone heard anything from Apple?
Thanks!

Yes. I'm having a very similar problem. I don't have TC, but I have a netgear wndr4000. I'm always bring my MBP out of sleep and having to manually select the 5GHz band. Even when I know it should. I have different SSID's on each band, and I have tried setting the priority order, but that has another set of problems. When I get a little farther away, it will hook to the 5GHz band at 54Mb, but the 2.4GHz will be at 130Mb at the same distance. I thought it would make some type of smart choice about it.
I had been thinking about moving to a Airport Extreme because I've been told by others that their machines make the correct choice with the SSIDs set the same.
I too am on Snow Leopard, but I'll be upgrading soon.

10.5.8 does not resume wired ehternet after resume from sleep.

I am new to administering macs but have many years linux experience.
I have a imac here that does not correctly wake from sleep.
It assumes an generic IPV4 address instead of resuming its lease.
Here is some data from the kernel buffer running dmesg:
previous Sleep Cause: 0
Ethernet [AppleYukon2]: Link up on en0, 100-Megabit, Half-duplex, No flow-control, Debug [796d,4c08,0de1,0200,40a1,4000]
0 [Time 1271523730] [Message System Sleep
Wake reason = EHC1 EHC2
System Wake
Previous Sleep Cause: 0
USB (EHCI):Port 2 on bus 0xfa has remote wakeup from some device
Ethernet [AppleYukon2]: Link up on en0, 100-Megabit, Half-duplex, No flow-control, Debug [796d,4c08,0de1,0200,40a1,4000]
Ethernet [AppleYukon2]: Link up on en0, 100-Megabit, Half-duplex, No flow-control, Debug [796d,4c08,0de1,0200,40a1,4000]
[/code]
Things I have tried:
Searching here in these forums.
I have set the networking order in system > prefrences to put en0 first.
and disabled other services, network sharing, ipv6 etc.
I can correct the problem in the terminal using:
ifconfig en0 down
ifconfig en0 inet 192.168.0.2
ifconfig en0 up
however this is obviously not satisfactory for the user.
I read another post here about a 2nd dhcp being installed and conflicting with dhcp.
I am not sure how to check this but appears to be a dhcping: here is the output of locate:
locate dhcping
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/dhcping
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/dhcping/Por tfile
However I do not think it is "active" as which dhcp does not return anything.
Where are networking configuration files stored?
Is there somewhere I can set the IPV4 fallback IP address?
Or how about setting the DHCP timeout?
Thanks for any input / ideas.

Hmm thanks I have tried to reset the lease and looked at the advanced settings.
Nothing in the network pane fixes the problem reliably.
I suggested the same option to the user with the sleep issue and that solution was rejected as it saves more energy send the kernel into sleep mode.
The problem seems to have appeared after a update to 10.5.8.
Perhaps I will try to revert the computer back to 10.5.7. to see if the issue goes away?
Is there a "package manager" (like portage or apt-get?) for OSX system applications or is it just a release?
Perhaps I could just revert the DHCP application or the network manager as on linux?
Here is a link to that other post: http://discussions.info.apple.com/thread.jspamessageID=11088284&#11088284

Why does my computer keep freezing after waking from "sleeping"?

I'm running Lion (10.7.2) and frequently, not everytime, but often, the computer will freeze about 1-2 min after I've woken it from sleep – there are usually 1-2 applications open and then I can work for about a couple minutes and then it freezes and the only way to resolve it is to power it off w/ the power button and then restart.
I've got a late 2008 15" MacBook Pro, 2.4Ghz Intel Core 2 Duo, 4GB RAM – there is very little on the hard drive, but that seems irrelevant here anyway.
Thanks for any tips/help!

Intel-based Macs: Resetting the System Management Controller (SMC)

Not re-connecting automatically after waking from sleep

Hello,
I have recently purchased the TC 1Tb version. I have set this up to be automatic for both channels and all seems OK. However, after I wake up the Imac from sleep mode, the wireless does not automatically re-connect. I have to manually re-connect from the airport symbol in the menu bar. I have an a normal AE before this, and I did not have this issue.

Hello Diane:
Welcome to Apple discussions.
Try clicking the mouse if it does not automatically pair.
I would also delete the preference file (com.apple.bluetooth.plist) and restart.
Barry

Help ..my macbook pro late 2013, will not turn on..charger starts off green then immediately is out....it worked fine 2 days ago????

i have had a good experience with my macbook for a few years, when i downloaded osx, too many hanging issues, and now the battery, or charger will not work, no power ..just cannot get it to turn on

if you can borrow a charger from a friend, or go to the apple store and use a charger there; if it works then your charger is bad. If they also don't work then maybe your battery needs replacing.

S_ALR_87012178 does not show any data after upgrade from 4.6C to ECC6

Hi Gurus,
We do upgrade and do testing to all functional process realted.
When open S_ALR_87012178 in SAP ECC6 no data showed, but in old version (SAP 4.6C) data showed although we select the same parameter selection.
Any setting missed ? or any suggestion about this issue.
Thx in advance.
Tri Wicaksono

Hi Tri,
Check the following.
I have checked your request, and there are two 'ways' the report
will send out the data:
1. In a 'normal' list
If you call the report in the 'standard' way, the data get displayed
in a normal list. This is the standard.
2. If the 'ACCESSIBILITY_MODE' flag is set in the user parameters.
With this flag, the reports output is done with the ALV Grid display.
About this ACCESSIBILITY_MODE flag, refer to the note 929036,
which describes the 'function' of it.
Regards,
Fernando Evangelista

Macbook Air (mid-2011) Facetime HD Camera stops working after waking from sleep

Hi, for the past week or so (no more than a week), my computer has not been able to connect to my built-in camera. I have a mid-2011 Macbook Air (running version 10.7.5) and a Facetime HD Camera (version 6.46). I don't usually restart my computer unless I am having issues with it being slow or freezing and so usually just close the top of my laptop when I am sleeping or at work. When I wake my computer up and attempt to use Skype, Photobooth, or Facetime, I cannot connect to the camera. Restarting my computer fixes this issue but that's as far as I've gotten since I am not very tech savvy and do not want to do anything to jeopardize the data and documents stored on my Air (I'm in school so losing anything would be very stressful for me). I have gone into the System Information in my Utilities folder and my camera is listed under the USB tab but my computer refuses to connect unless I restart it.
Any suggestions or help would be greatly appreciated! Thanks in advance!

my computer has not been able to connect to my built-in camera
iSight is the built-in camera.
Help here > How to Troubleshoot iSight

Get safari 7 on macbook pro late 2013 to stop having bookmarks also go to iPhone 5s?

How can i get safari bookmarks I save on my macbook pro late 2013 to not also go to my iphone 5s? I want to keep notebook and iphone seperate and I do use icloud for both for backups, etc.
New to the mac side but have had iPhones since the 3G. I did read post saying turn off icloud for safari on my iPhone but wouldn't that impact all my bookmarks I have on iPhone if I ever restore from icloud?
Thank you

I did read post saying turn off icloud for safari on my iPhone but wouldn't that impact all my bookmarks I have on iPhone if I ever restore from icloud?
No.

Microphone Input Not Showing on Garageband 10.0.1 (Macbook Pro Late 2013)

I am using GB 10.0.1, trying to connect a microphone to my Macbook Pro (Late 2013) and record a few things. But the input doesn't show up at all... The only thing that shows up is "Built In Microphone". What should I do?

kdrummercash wrote:
I believe the computer won't power the microphone.
an SM58 is a dynamic mic, not a condenser, it does not use Phantom power, however there still are reasons why you can not plug an SM58 directly into a Mac, and do indeed need an interface:
http://www.bulletsandbones.com/GB/GBFAQ.html#micline
(Let the page FULLY load. The link to your answer is at the top of your screen)

I got my iPhone 6plus 10 days back. And I updated to 8.1. Am having MacBook Pro late 2013 which has been updated to Yosemite. My iPad air also updated to 8.1. But am not able to use airdrop among these devices. AirDrop is not working inspire of doing

I Got my iPhone 6plus 10 days back. And I updated to iOS 8.1. My MacBook pro late 2013 mode was updated to Yosemite.
MY iPad air has been updated to 8.1. But airdrop is not working among these devices inspire of doing all settings. can anyone solve this problem?

Try following this article.
Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices
Mann

MacBook Pro late 2013 not charging

Hello guys!
Well, I'm having a problem with my laptop. (MacBook Pro late 2013, 15" 2.3 GHz, 16 GB ram etc) Today, my battery went down to 3% and I connected it to its charger but it does not do anything. No light at all and of course no charging. As far as I can remember, before it died it did not show "Not charging" instead of the battery percentage or anything. Tried removing the long cable and using the short one but still nothing. Tried different outlets, nothing. I read on the internet multiple suggestions and tried most of them (its dead so I can not do anything software related). Tried cleaning the MagSafe, turning it upside down, warming up the charger a little, still nothing. The complicated things are: I live in Greece (no apple stores), so i cannot just go to the genius bar to get it checked. It probably is the charger, but it might as well be a problem with the device itself, and I cannot just buy another charger to try it since they are expensive. By the way, once a few months ago, the charger got really hot and did not work at all until it cooled down a little. Any other advice?

Hi, AppleiGeorge.
Thank you for visiting Apple Support Communities.
I understand that your MacBook Pro is not charging. Here are some troubleshooting steps that may help.
Troubleshooting batteries
Built-In diagnostic tools
My battery runtime is low
My battery is not charging
My battery will not charge to 100%
My battery is not recognized
The low battery warning does not display
Mac notebooks: All about batteries
http://support.apple.com/en-us/HT204054
-Jason H.

MacBook Pro late 2013 does not show login window after waking from sleep

Similar Messages

Maybe you are looking for