MacBook Pro, Leopard & Suddenly not working printer

Hi.
I have a new MacBook Pro (4 weeks old). I installed the Leopard software that came along with the new computer. I have an HP5180 printer. Everything was working just fine until last night when all of a sudden when I go to print something, I get the error "Printer is currently Offline". This same printer works just fine with my iBook G4. And it worked just fine with my new MacBookPro....until last night.
I cannot print anything using my MacBookPro.
Help?
Thank you
Margie

Did you install anything recently? How is the printer connected in the network?

Similar Messages

  • Hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

    hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

    hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

  • I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7).  What is the problem?

    I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7).  What is the problem?

    You haven't identified the version so I can't tell if offering you contact options for Adobe Support will be of use to you.  But they will likely be your only hope of getting resolution unless you just happen to be using the wrong number as the serial number.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
    Phone support | Orders, returns exchanges
    http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • My macbook pro external speaker not working! help please

    My macbook pro external speaker not working! help please

    1. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
         Pllug in the speakers.
         Do they show up?
         Make sure that Mute is not enabled.
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • My macbook pro retina is not working camera after updating Mountain lion.

    My macbook pro retina is not working camera after updating Mountain lion.
    I have also updated to latest update 10.8.1. Still its the same.

    Reset SMC.  http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • Programs suddenly quitting on my Macbook Pro and Airport not working right

    I upgraded from an ibook to a Macbook pro about a month ago. Over the past month at least once a day a random program will "unexpectedly quit" on my computer. I have updated all the software on my computer and dont really run much peer to peer software. Also, after waking up from "sleep" my airport will suddenly stop working or even recognizing the my network. This is only solved by a restart. Can anyone help with this? I never had these problems with my sturdy old ibook. Between the high temp my computer reaches, the relatively short battery life, and the issue with all the software quitting I'm starting to feel like I was sold a lemon. Any positive feedback would be appreciated.
    macbook pro 15' Mac OS X (10.4.6)

    I have a 15 inch mbp and while i am using it the computer shuts down while i am working in word. This is upsetting as I am losing what I havent saved since the last save.
    This problem cropped up today. Any thoughts or suggestions. I havent added anything by way of ram or other hardware.
    Please I need your thoughts. This is my first mac.
    Thanks for the assist

  • My MacBook Pro trackpad is not working

    My Macbook Pro was purchased in September 2009. The trackpad is not responding to clicks on the computer. The cursor is present and you can click the trackpad just fine, but it will not select what I click. It's very frustrating. It worked fine, but then all of a sudden it isn't. Help me with this issue please ASAP!

    My Macbook Pro was purchased in September 2009. The trackpad is not responding to clicks on the computer. The cursor is present and you can click the trackpad just fine, but it will not select what I click. It's very frustrating. It worked fine, but then all of a sudden it isn't. Help me with this issue please ASAP!

  • 2007 MacBook Pro ctrl key not working

    Hi all,
    I have used various iterations of bootcamp with my 2007 macbook pro without problem. I have also sucessfully installed Windows 7 64-bit using bootcamp and got it working almost perfectly (sound, video, magic mouse) despite it not officially being supported by the version of bootcamp that came with Snow Leopard.
    My only problem now is that the control lkey isn't working. I've tried various keymappers to map it to another key (generally the Apple key) to no avail. And when I say it isn't working, I mean it's not working at all. Key mappers don't recognise when I tap it, I can't Ctrl-C to copy or Ctrl-anything to anything.
    I have installed the Apple keyboard driver and everything else works perfectly, including the F-keys, Fn, alt and the Apple key (which opens the start menu). Any suggestions for how I could fix this would be greatfully received.
    Thanks,
    Alexis

    Sadly it turns out that it's not working in OS X either. I had convinced myself it was a software issue but it is apparently hardware. Shows how seldom the control key's used in OS X doesn't it.
    If anyone has any suggestions as to how I might have a bash at fixing it, please let me know.
    Thanks,
    Alexis

  • New Macbook Pro number keys not working

    Hi everyone,
    I have a brand new macbook pro (running 10.6.4) who's number keys suddenly stopped working. The keys from 1 through 9 do not respond at all. Neither does holding down shift, while pressing them. The key rows below and above them work fine. I have the newest updates on the machine, and have restarted multiple times.
    Any suggestions would be greatly appreciated!
    Thanks!

    This same issue happens to me frequently. I've lived with it for the most part just because I didn't want to spend my time running down Apple's glitch. I can not tell if it is a hardware, firmware, or software issue. I have a case number which is 163792369 that I've had since June. I've never taken it in because it is not consistent. I'm leaning towards an OS glitch. I have searched Apple's archives and found one reference to it happening on an earlier version of OS-X, but I was afraid to install the patch because of version differences. Please let me know if you get a solution from the customer support. It is somewhat frustrating as this is my first experience with a Mac and I understand it's a complex piece of machinery from a hardware and software perspective, but fresh out of the box the freak'in keys should work.
    Thanks,
    Shawn A. Peterson
    It just works??? Most of the time.

  • HT6510 Airdrop between two Macbook Pro's is not working in Yosemite

    Airdrop is not working between my Macbook Pro Late 2011 and my co-workers Macbook Pro Mid 2012 on Yosemite. We're on the same wireless network. It worked fine in Mavericks.

    It's probably that UVerse modem/router you have.  I say this because I've run into similar issues with Arris modem/wifi router boxes from Comcast for a few clients.  They went out a bought an AirPrint capable printer and configured it on the network.  They could print to it from their PCs just fine (IP based printing), but none of their iOS devices would see the printer as an AirPrint device, they couldn't see any printer on the network.  The solution was to put their modem into bridge mode (while disabling the WIFI on it) and use a Netgear router behind it in normal fasion.  AirPrint worked fine after that.  After some further digging, I discovered that Arris has an issue with supporting some Multicase based protocols on their boxes.
    My suggestion is to go try AirPrint on another WIFI network and see what happens.  If it works, then you have your answer.  Obviously, if the first one doesn't work, don't give up... you can't just say it's not the router beause you can't be sure what that other network has for WIFI.  Just keep an open mind when testing this.  Or you could go get yourself a router and set it up, but that of course would cost you money you may not want to spend until you're 100% sure that this is the case here.
    After a simple search, I found this.  http://forums.att.com/t5/Residential-Gateway/AirPrint-Function-Quit-After-Uverse -Install/td-p/2936993
    Seems the gateway device that UVerse installs can have similar issues as I described above.  At this point, I'd look at that device as your culprit for this.  I can't think of anything else that could be causing this to not work.

  • Macbook Pro intranet will not work on iPads

    I'm trying to set up an intranet network hosted on my MacBook Pro running Mountain Lion 10.8.5.  I have created a local web site hosted in the Apache server on the MBP, and I want 5 iPads to access it.  Its event photos for sale.  The problem is, the site shows up on the iPads ok, but when I tap a photo to enlarge it, it hesitates, then the browser crashes, every time, no matter what browser is used.
    I'm using an Airport Extreme for the wifi.  The problem occurs whether connected to the internet or not.  I tried connecting the Airport to the MBP with an ethernet cable, and making a whole new intranet network on the Airport, and it still does the same thing, despite trying a lot of different configurations.  So, I got a MAMP server, and it still did not help.  I need it to work offline because the events I photograph rarely have internet access.  I've tried using the peer-to-peer connection with the same result.
    I have used the exact same system hosted on my iMac (identical operating system) with no problems.
    I can't figure out what is wrong, any help would be appreciated!

    Try
    Intel-based Macs: Resetting the System Management Controller (SMC)
    <http://support.apple.com/kb/HT3964>
    It's important to know precisely what MBP you're dealing with. For instance, if it's a Mid-2010, 15in,
    <http://support.apple.com/kb/TS4088>

  • 2008 Macbook pro left click not working properly after upgrading to 10.6.8

    I have a 2008 Macbook pro and a few months ago after upgrading to 10.6.8 my left click has been wonky.
    Using the trackpad the left click eventually gets "stuck" or stops responding and I have to push it multiple times before it does anything.  I have tried plugging in a mouse, but when I do so the mouse also behaves the same way.  The only way I seem to be able to get the clicking to work properly is to restart the computer with the mouse attached.
    I have seen threads about trackpads being messed up by swollen batteries, but my battery is brand new and looks fine, and the clicking problem extends to an external mouse, so I believe it is something with the preferences.
    I tried deleting  com.apple.driver.AppleBluetoothMultitouchTrackpad.plist   and restarting and the problem seemed to be fixed, but then after about a half hour it returned.
    Having to keep a mouse plugged into my macbook is driving me crazy, anyone know a solution?

    I started having the same issue after update.  I'm on a MacBookpro running 10.7.2
    ICalled apple and they did a remove battery reboot, a reload lion and a option/command/R/P reboot on startup and then the computer started working.  Two days later problem was back.  I then did a reboot and the computer was back to working.  Today the computer worked fine tell it went to sleep.  I had to do a hard reboot to get the Mac up and running and now no left click.  Please help. I can not use the Mac  with the trackpad, a mouse, a Bluetooth mouse, or a digital pad. All so signs of left mouse click not working.  One other item when you go to pick your user at startup the left mouse click works.  Help!

  • My macbook pro charger is not working

    Dear All,
    My macbook pro (Retina, 13-inch, Late 2013) is not working, no light is appearing...  What can i do now, Please any one help me.

    Hello,
    Please read this to troubleshoot your Mac or it's charger :
    Apple Portables: Troubleshooting MagSafe adapters - Apple Support
    If you are experiencing a hardware issue you better contact an apple store or get an appointment at the Apple Genius
    Bar to get your Mac fixed
    http://www.apple.com/retail/geniusbar/

  • Using EarPods Mic with MacBook Pro 17" (2012) - not working

    hello,
    FYI: computer is the early 2012 MacBook Pro - last of the 17" models. it has the 2 separate jacks... one for audio/mic IN and one for headphone OUT. not combined like in the smaller models.
    FYI: using a brand new (early 2013) pair of EarPods that came with a new iPhone 5.
    i love using the earpods plugged in to the headphone jack to listen to music whilst working. and i also use it to "listen" when doing video conferencing via Skype, iChat/Messages, & Hangout.
    but when i'm in a noisier environment (cafe), it would be nice for the other people i'm talking to to hear be better than what the built-in mic can provide. people tell me they hear me great using the earpods when talking thru my iPhone in the same locations.
    so, i thought, okay, i'll just get a Y-splitter/adapter... female input to 2 male outputs. recognizing that the earpods have 3 rings on the mini-jack (2 for stereo headphones & 1 for mic, i presume), i made sure the adapter male ends had at least 2 rings on them. found one at Radio Shack.
    but it does not work! :-(
    discovered audio output comes thru fine, but the computer doesn't recognize the mic input.
    i've gone to System Preferences > Sound > Input...
    and changed the selection from "Internal Microphone - Built-in" to "Line In - Audio line-in port" but the level meter just goes dead.
    i've done some reading about the MBP only allowing "line level in" vs "mic level in" but i don't know what that means.
    can this work? if not, why?
    am i just missing some setting somewhere? if so, what?
    do i need some different kind of adapter? if so, please point me to one.
    THANKS!!!

    Good that it was a simple solution. I've had some of the mice lose the BT association  and you have to clear out the configs and re-pair the two.

  • NEW macbook pro power cord not working

    I just bought my macbook pro 3 weeks ago and for some reason my power cord is not working to charge the computer. There doesn't appear to be any damage to it and I've tried plugging it in to different outlets etc. and no luck. I noticed one day that it was blinking on and off from charging and not charging and then the next day it just stopped working completely. Is this a common thing? Should I just go buy a new one?

    Welcome to Apple Discussions!
    Your power adaptor is under warranty as well as your new Mac. If it isn't working, Apple should replace it for free under warranty.
    You might want to try resetting the SMC:
    http://support.apple.com/kb/HT1411?viewlocale=en_US
    This is likely the first thing they would do at the Apple Store, and it may well solve the charging problem.
    Good luck!

Maybe you are looking for