MacBook Pro locked at log in screen

I am unable to log back onto my computer after logging out.  The grey screen comes up with my user names, and my mouse seems to work, but I am unable to click on any icons on that screen.  I have tried a few things I have found on here, but so far no success.  Thoughts?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • Power on MacBook Pro takes me to login screen. All user icons appear as normal. Once I enter password for myself (administrator) spinning takes longer than normal and doesn't log in but displays a no sign

    Power on MacBook Pro takes me to login screen. All user icons appear as normal. Once I enter password for myself (administrator) spinning takes longer than normal and doesn't log in but displays a no sign (circle w line through it) when attempting to login from guest account it takes me to screen that says that the computer will restart to a safe safari system for the guest user. I waited for a longer time and the grey denim screen comes up. By the apple in left upper corner it said I think LSA? Then safari menu bar. The page it loads to us file:///System/Installation/CDIS/Mac%2005%20X%20Utilities.app/Contents/Resource s/English.iproj/GuestLoginInfirmation.html
    Can someone HELP? I'm afraid I might do something wrong

    What backups do you have?

  • TS3824 My MacBook Pro freezes with a white screen after I log in.

    MacBook Pro freezes with a white screen after I log in, support says to download an update, but if it
    s frozen, how do I update?

    Thanks for posting back your solution.  It will help others w/the same problem. 

  • My MacBook Pro won't log me in at the log in screen

    My MacBook Pro won't log me in at the lag in screen. It won't restart and it's the right password (won't do the vibrating thing that it does when it's the wrong password). Any suggestions?? I really can't do anything on it.... Command-r doesn't work and neither does shift.

    You are supposed to press Command-r as soon as you push the power button to turn the computer on.
    I hope I helped.
    Austin

  • What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...

    As the topic says,
    What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...
    Help me out please.

    Yes ... minidisplay
    But what I do not like in that picture (my personal view, others may think differently), is that there is much plastic around the connectors where the cable must fit.  You may ot may not be able to get the cable to *fully seat* with the adapter.
    Other adapters (http://www.microcenter.com/single_product_results.phtml?product_id=0334087, yes I know this is a DVI) hve no plastic barriers to connections.

  • My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help?

    My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help I have tried everything I know to do

    Unfortunately this means that there is a problem in the boot sector of your hard drive. It might be indicative of a fundamental corruption in the coding that allows your computer to boot your operating system from your hard drive. I had this problem twice and it resulted in me having to get a new hard drive and restore my data.
    In other words, your computer can't talk to your operating system so you can't access your data.
    Here is my advice: DON'T CALL APPLE TECH SUPPORT though they are kind and usually helpful it will take you an hour just to explain the situation and they will only tell you to do what I'm gonna say here.
    First: Shut down your computer completely
    Two: boot up while holding down the following keys: command, option, p, and r. The computer will reboot 3 times. This solution will likely fail so if you're frustrated skip to the next step.
    Three: Boot up while holding down the option key. Select recovery drive. Select your default language. Select disk utility, click on Macintosh HD, and select "verify and repair volume." Likely the verification will produce some line like "unused node not erased." Or something like that. If anything using the words "node structure" comes up, you need a new hard drive.
    If after verification and repairs you still can't boot I sincerely hope you have apple care because you will need a new hard drive. Set up an appointment to come in to the apple store, they will tell you to go and get data recovery, just ask them to give you the old hard drive. Unless you have an up to date backup in which case you can just restore from that. If you're lucky the only issue is with the boot sector which means that if you ask them to give you the old hard drive, you can buy an enclosure and you have effectively been given a free external hard drive. It still works to store data just not to load an operating system.
    If you have a back up drive bring it to the apple store and they'll do the whole thing right there, it should take around an hour and a half but may take longer.
    Hope this helps, it's annoying but it's your safest bet.
    All the best.

  • How to erase a Macbook Pro Hard drive when the screen is dead

    I have a Macbook Pro (2007) with a dead screen and a motherboard issue. Just bought a new macbook and i was planning on transfering the hard drive over and selling my pro on ebay for parts, Is there anyway i can securely delete my data from the computer without seeing it on the screen before i decide to sell it?

    Be sure your dead Mac isn't covered by this program:
    http://support.apple.com/kb/TS2377
    If it is, you can get a free repair, and it would be worth a lot more on EBay.
    Good luck!

  • I have reset my macbook pro to factory reset the screen is now asking me to put in my details, do i have too as if i am showing it to someone they need to be able to see it working but does that not mean that my name will be on it. please help

    i have reset my macbook pro to factory reset the screen is now asking me to put in my details, do i have too as if i am showing it to someone they need to be able to see it working but does that not mean that my name will be on it. please help

    Use a alias, but you might have to use a zip code that matches the location used.
    Also if you click the right button there is a way to bypass the registration, like register later or something, Apple has it hidden. Also to bypass the internet connection to send the registration off.
    Never place your name on a Mac or PC, it's spread throughout the entire machine, in emails, on the network in plain sight etc.

  • When I turn on my Macbook Pro and sign in, the screen is blank, none of the icons appear, I can't click, open or do anything! Help!

    When I turn on my Macbook Pro and sign in, the screen is blank, none of the icons appear, I can't click, open or do anything! Help!

    You could try this; Mac OS X: Starting up in Safe Mode.It takes awhile to come up so patience is a virtue here.
    And here is What is Safe Mode.
    DALE

  • I have a macbook pro can can log into a server, but my new iMac with lion can't even see the server--both are over wifi- how do i get the new iMac to see the server?

    i have a macbook pro can can log into a server, but my new iMac with lion can't even see the server--both are over wifi- how do i get the new iMac to see the server?

    Without knowing what you have tried please open System Preferences - Sharing - File Sharing and select File Sharing. If you still have trouble you can call AppleCare in the morning when they re-open. You have 90 days of telephone support if you haven't already bought AppleCare.

  • Why won't my MacBook Pro start up? White screen and flashing question mark.

    Hi,
    I've had my MacBook Pro for almost 2 years now and I installed OS X 10.8 about 4 months ago.
    Today I turned the MacBook Pro on and a white screen with a flashing question mark appeared. I tried then getting the startup manager up: turning on the laptop and immediately holding in alt (option). But nothing appeared for about 25 seconds until a rotating Earth labelled 'Internet recovery' appeared that gave me options to join wireless connections. However, my internet wasn't in the options and when I tried typing in the information required to join my internet the laptop would just load and never find it.
    I then tried putting in my Mac OS X install DVD (10.6.7) and help in C until the apple logo appeared on the screen and the little rotating loading circle appeared. That then disappeared and a cicle with a cross through it appeared (similar to a no entry sign). Then after about 30 seconds a blue screen followed by a grey screen appeared until eventually the disc ran properly. I then went into Disk Utility but there was no option called Macintosh HD, only the discs content. It wouldn't let me first aid, erase or repair anything.
    I'm totally stumped and have 4 exams at university within the next 2 weeks. I'd really appreciate it if anyone could help me out here?
    Thanks,
    Best wishes,
    Connor

    The support article linked below is somewhat outdated. Where it refers to starting up from an installation disc, you should instead start up in Recovery by holding down the key combination command-R at the chime. Release the keys when you see a gray screen with a spinning dial.
    If you don't have a current backup of all the data on the startup volume, and you want to preserve that data, then you must try to back up before you do anything else. Ask for instructions if you need them.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to reinstall OS X from Recovery, if necessary. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    A flashing question mark appears when you start your Mac

  • My early 2008 Macbook Pro is suffering from black screen after Yosemite update

    My early 2008 Macbook Pro is suffering from black screen after Yosemite update. It ran beta 5 great but failed on restart after beta 6 install. There is no cursor but I can hear the HDD spooling up. I have tried booting in safe mode, PRAM reset and SMC reset but nothing works. After the first 5 days of every now and then trying to start it, it started fine. I used the machine all day with no problems, it had rolled back the install and was back on beta 5. I decided to try the update again, the same thing happened and it has stayed black for over a week now. It wont work with a monitor either. Help!

    Hello Adam,
    I would try instead of installing the beta software, to install the official build of OS X Yosemite from the Mac App Store to see if that gets you passed the no video issue when updating the beta software. 
    How to install OS X Yosemite on your Mac
    http://support.apple.com/en-us/HT6412
    Regards,
    -Norm G.  

  • 2012 macbook pro retina display artifacts on screen when using onboard video

    2012 Macbook Pro Retina Display artifacts on screen when using onboard video.
    About a month ago I've noticed these strange artifacts (blocky pixelated looking) running vertically down the screen. It first started when using Safari. Then it started to happen all the time. I turned off the auto switch video in preferences, which I'm assuming forces the computer to use the separate video card and the artifacts go away.
    On top of that issue I also have had the ghosting issue.
    Anyone else have this problem?

    artifacts onscreen could mean a faulty gpu. You said by forcing it on inbuilt gpu you do not find this issue highlights that. Do take it in to apple for service and also tell them of your ghosting issue.
    There are a few retina owners who have faulty gpus.

  • Can I use MacBook pro A1211 with external monitor, screen has died but

    CCan I use MacBook pro A1211 with external monitor, screen has died but computer seems fine

    Hmm seems like this model has DVI out. You could just plug a standard DVI monitor into that. Or use the DVI connector (VGA supported with included adapter; S-video and composite video supported with optional adapters) adapter that came w/ your machine.

  • When i turn on my macbook pro it has a black screen and just beeps quickly 3 times with a pause and then repeats.

    when i turn my macbook pro it has a black screen and it beeps 3 times in succession with a pause and then repeats the beeping and so on.

    If you replaced the Ram in your machine at any time, you may not have been aware of the fact that Apple computers have always been a little picky when it comes to 3rd party Ram.  Apple computers have always run very well on 2 different brands.
    Memory for iMac 2GB, 4GB, 8GB, 16GB, & now 32GB - OWC Certified RAM for Apple iMac with Lifetime Warranty
    This first link is from other world computing and none of us on these forums to my knowledge have heard of any bad ram from either Other World Computing
    or Crucial Ram.
    Crucial Ram
    The only difference I am aware of is that Crucial offers a download and will tell you exactly what Ram your computer is capable of using and the prices that are available.
    Resolving Kernel Panics
    HOPE THIS HELPS IN SOME WAY
    DON

Maybe you are looking for

  • Validation of values in an input field.

    Hello togther, I've created an input field with a value-selector, so that the user can choose a value from help-list. But he can also enter a value directly into the input field. Is there any "STANDRAD" method to check whtether the value which is in

  • What happened to ImageReady?

    I used to use ImageReady to create rollovers for web sites. ImageReady no longer exists in CS3. Ive looked through the Video Workshops and the help files on both Photoshop and Dreamweaver. There is little or no mention of creating rollovers in anythi

  • Queryable Extended Attributes not Queryable

    Hey All, I added a queryable attribute 'Username' to IDM. I set it up under the config -> attributes page. I then added it to the UserUIConfig to the SummaryAttrNames, QueryableAttrNames and the RepoIndexAttrs lists. I then edited the User Search Def

  • Get non-iTunes music on my iphone

    I downloaded an album off the artist's website, and my iPad/iPhone are saying apple does not currently support non-iTunes music.  How do I get the album on my iPhone?

  • Parts of pages don't work in ALL web browsers?

    There's a site where I'm a registered user and have a profile page. One one of my PowerBook G4s, all the frames and content appear fine and I can use the tabs and pull-down menus no matter which browser I use (Safari or Firefox). On my other PB G4 th