Macbook Pro MA609 (ati x1600) + Windows-7 64 bit. Any chances?

Hello,
trying to install W7 - 64 on MBP with Mobility Radeon x1600 video and have "standart VGA display". 3.1 update didn't help.
Did I miss something or I won't have it running anyway?

I'm looking into running Windows 7 64bit on the exact same MBP you have, so I'm curious as to whether or not you've found a solution yet outside of the forums.
Do you think it might be that the bootcamp 3.1 update is only for Windows 7 32bit and not for the 64bit version?

Similar Messages

17" MacBook Pro Core i5 Boot Camp Nvidia 64 bit driver install issue

Can't get correct Nvidia driver to install on 17" MacBook Pro core i5. Windows 7 64 bit is installed and running but its using a standard VGA driver for the video card so the full resolution of the display is unatainable. I've loaded the snow leopard windows 64 bit drivers, downloaded the BootCamp 3.1 64bit drivers and installed but each time I try to run it the Nvidia part of the installer closes with the error, you are trying to use a 32bit uninstaller for a 64bit program, and it exits. I've double checked to make sure I have the 64bit driver installer instead of the windows 7 32bit installers but I still get the error every time. I then downloaded Nvidias own driver for windows 7 64bit Gt 330M and it gets the same error. Please help?

A number of people in this and other forum threads have reported problems with the Nvidia drivers when installing Windows 7 (64bit) on the new Macbook Pro (April 2010).
The problems appear to be due to an installation of Boot Camp 3.0, followed by the update to Boot Camp 3.1. As Boot Camp 3.0 does not include the Nvidia graphics drivers for the
Macbook Pro 2010, the graphics card is not recognized and the subsequent update to Boot Camp 3.1 does not complete successfully.
The proper approach consist of installing Boot Camp 3.1, which is included in the system disk that shipped with the laptop. A copy of that version was posted e.g. here
http://files.me.com/jason_fearing/an51fn. One should not use on the Macbook Pro 2010 the Boot Camp version 3.0 that shipped with the original DVD of Mac OS X Snow Leopard.
I had the same problems that were reported in the forum, when installing Boot Camp 3.0 + Boot Camp 3.1 update on Windows 7 (64bit). First I had to manually run the 64bit Boot Camp setup, as suggested by others, and then I had to install the Nvidia drivers with the modified INF files from http://www.laptopvideo2go.com/, as the graphics card was not recognized.
However when I used the proper Boot Camp 3.1 that came with the laptop, everything went completely smoothly and the installation consisted of just clicking on the setup file.

Macbook Pro and ATI Graphics crashes in Windows Vista and 7

Hey all, I was wondering if anyone else had been having problems with Windows 7 and Vista having graphics driver crashes. I have been having this problem since the Boot Camp beta, and it has yet to be addressed as far as I can tell.
Basically the problem is that after a few minutes in either Vista or 7(after installing all the boot camp drivers from the Leopard or Snow Leopard disc) the screen graphics will start getting all corrupted. Eventually I will get a message in the taskbar telling me that the ATI driver has crashed and recovered from an error.
I have looked everywhere online I can think of for an answer, but have come up pretty empty thus far. The only thing I remember finding that was a possibility a long time ago was something to do with trying it with 1 stick of ram installed rather than 2, or that my ram could be problematic.
I tried running with just 1 stick, and that didn't help at all. I also tried each stick individually also with no change. I even went as far as running a diagnostic using some kind of memory testing software to see if the ram was bad, but it came back as good.
Also, I have run in XP without any issues whatsoever, so I am assuming it is something Vista and 7 specific. I was thinking it might have something to do with the Aero features as when I disable the ATI driver and run in Windows Basic without Aero enabled, I don't get the graphics glitches. Another clue might be that when the graphics glitch up, if I bring up the ctrlaltdel screen which gives you the option of Task Manager, Log Off, etc. the graphics are NOT glitched on that screen. As soon as you exit that screen however, the glitched screen is immediately back.
Bah, I am at pretty much the end of my sanity trying to figure this out, and was just wondering if anyone else has had this problem with the older MacBook Pro or is mine just inherently bad? Any help would be greatly appreciated.
Here is my system info just for extra help possibly?
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro1,2
Processor Name: Intel Core Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP12.0061.B03
SMC Version (system): 1.5f10
ATI Radeon X1600:
Chipset Model: ATY,RadeonX1600
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x71c5
Revision ID: 0x0000
ROM Revision: 113-xxxxxx-086
EFI Driver Version: 01.00.086

Just an added update for anyone interested. I believe I have finally figured out what the issue is.
Apparently, at least on this model of MacBook, Apple has the ATI card underclocked to 310MHz / 278MHz (GPU and RAM respectively) when running normally. However, when running in Windows the ATI driver automatically uses the full clock speed of 470MHz / 470MHz (or something to that effect). The reason that it ends up getting artifacts and driver crashes is because of overheating. Apple has it underclocked because of the way heat is distributed in the system.
Anyway, I found a tool that KIND of works for fixing the issue I believe. It is called ATITool, and allows you to change the clock speed to the 310MHz / 278MHz that works so well in OS X.
It is located at: http://www.techpowerup.com/atitool/
One thing though, the newest version 0.27 beta 3 (on mine at least) causes the backlight of the screen to go off when you load it in Windows. If you put the machine into hibernate, then bring it back up it will come back on... but that is annoying. I have found that the version 0.25 beta 13 doesn't have this issue. It is possible some of the other versions prior to 0.27 beta 3 also don't have this issue, but I haven't tested them yet. I will give some of them a try later.
The previous versions can be found here: http://www.techpowerup.com/downloads/Tweaking/ATITool/
Anyway, if anyone else has luck with other clock speeds or knows of any other solutions please let me know. This way works, but I would like to find a better solution if possible.

Does anyone know How to run twin monitors on a MacBook Pro operating on a Windows Server 2008 R2 ?

Hi
Does anyone know How to run twin monitors on a MacBook Pro operating on a Windows Server 2008 R2 ?

I know this doesn't help you much, but, I think you have to see if your Mac pro does audio out via HDMI. I don't even know if mine does via DVI. I think it may have to do with the adapter. Try going into Audio MIDI and setting the digital out to multichannel
and using the toslink cable for now. Lemme see...apparently DVI does not carry audio at all. Hm. apparently monoprice could be helpful? If I understand what you're saying correctly: you want to take DVI and multichannel audio via the Toslink and have it all go out over HDMI, right? Whooo..... amazon...looks like it's about $100http://www.amazon.com/Audio-SPDIF-Toslink-Converter-Adapter/dp/B0015YYOQQ
just a shot in the dark
I'm probably wrong....or not
John B

Everytime I open Safari on my MacBook Pro a pop-up window from my Finder menu, with the Applications highlighted on the left in the favorites column with the Resources folder highlighted comes up and locks my Safari page until I manually close the Resourc

Everytime I open Safari on my MacBook Pro a pop-up window from my Finder menu, with the Applications highlighted on the left in the favorites column with the Resources folder highlighted comes up and locks my Safari page until I manually close the Resources window then I have to refresh the internet search address line at the top of Safari. Can someone tell me how to stop this. It started after a software upgrade. It didn’t do that before. Thank you.

A few thoughts for diagnosis/testing purposes:
Have you recently run the disk utility and repaired HD and permissions? If not do so.
Boot into the Safe mode - hold down shift key on boot - and see if the problems are still there. Some functions won't work but see if anything odd happens.
Check your startup items. Get rid of them temporarily.
Create a new user account and see if the problems occur with the new account.
Lastly, be sure your backup is up-to-date.

How do I convert my Windows 7 Folder to an ISO image to burn to a USB, in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

How do I convert my Windows 7 Folder to an ISO image to burn to my USB Flash drive (16GB) in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

Sorry - confusing - My question has NOT been solved yet - can anyone help?

On my MacBook Pro, while using the windows side, I have no audio. Any suggestions

On my MacBook Pro while using the Windows hard drive, I have no audio. The icon shows that I should (no mute insignia). Any thoughts what I might do to correct?
Thnaks.
Tom

Whoa, I found the answer by clicking on one of the questions in the "More Like This" box to the right. I do wonder how to find that box before posting my dumb question. The answer turned out to be checking the youtube volume control. I turned that up and it solved the problem for Comast as well.

Macbook Pro Will Not Boot Windows Disk

I have a late 08 (or early 09) Unibody Macbook Pro 2.53Ghz. I start the Bootcamp Assistant and successfully create my Windows partition. When I restart with the Windows 7 disk, I get a blinking cursor for 1 second then it goes to a black screen and never leaves. I have tried several different Windows 7 disks with the same result. I have even tried booting from a Windows Vista, Windows XP and even a Ubuntu disk all with the same result, stuck at a black screen.
I took the hard drive out of this mac and put it into my wife's older Macbook pro, and it booted off the Windows 7 disk and completed the install to the drive with no issues. I then put the hard drive back into my Macbook Pro and get the same black screen when trying to start the Windows partition, and still have the same problem that it will not boot from any other OS disk be it Windows or Ubuntu. It boots from OS X DVDs without a problem.
Also several months ago I had a Windows XP installation on this computer with no issues. I wiped it just before going to Snow Leopard.
Any clue as to what is going on here?

What is really odd is if I take my hard drive out of my Unibody Macbook Pro and put it into my wife's non-unibody Macbook Pro, it boots the Windows partition with no problem (Remembering I previously swapped these hard drives to complete the Windows installation to my hard drive). Seeing as the disk boots on her machine fine and not in mine, and my Windows cds (DVDs) boot fine on hers and not on mine, it seems to me it's something specific about my machine, but I can't imagine what it is.

I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.

I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.

OS X can natively read NTFS of Windows, but not write to it.
Windows can't read or write to HFS+ of OSX, and that's a good thing from a security standpoint.
Ideally if you share files between operating systems you should have a FAT/MSDOS formated USB key or hard drive. (exFAT external drive if any of your files are over 4GB in size) both these formats are universal for OS X or Windows.
If you install software into Windows and OS X to read each others formats, then you have to pay to update/upgrade it deal with headaches.
If you swtich between Windows and OS X a lot, don't need full hardware performance for Windows, you may consider installing virtual machine software like VMFusion or Parallels which can take a copy of your Windows in Bootcamp and place it into OS X as a file then run that copy of Windows in a window in OS X like so.
Advantage here is you run most of your light weight Windows programs like this at the same time as OS X.
Benefit is you can run just about any Windows or Linux version and OSX server editions (not client versions)
Bootcamp only allows Windows 7, that's it now.
You'll also be interested in two fre pieces of software, Carbon Copy Cloner and Winclone on macupdate.com.
CCC clones OS X partition and Winclone clones the Bootcamp partition. Valuable for you.
Good Luck

While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player.Or neither connects to the server that i created

While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player. Or, any other devices doesn't connects to the LAN server that i created in the Game.
Could any one help me please.

Please do not post more than about 50 lines of console logs or output from an Application crash at a time. No one can make it through those.
If you had a kernel panic, those are Full of good information and should be posted in their entirety. They are stored, and can be read back and posted using this article:
How to log a kernel panic

I lost my password and cannot log on to my MacBook Pro. MacOS X window opens upon startup, with my log on name, requesting password, but I cannot remember it. Is there a way to bypass this window and reset my password? Cannot get to System Preferences

I lost my password and cannot log on to my MacBook Pro. MacOS X window opens upon startup, with my log on name, requesting password, but I cannot remember it. Is there a way to bypass this window and reset my password? Cannot get to System Preferences or Apple Menu
Thanks!

Yes.
https://discussions.apple.com/thread/4913069

My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. Any suggestions?

My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. However I can then take my DSL cord and insert it in a different Ethernet port other than the WAN port and I can get internet on my Mac and iphones but only wifi on my husband's PC. I hate to spend another $179 if this is just something I'm doing wrong. Please help

I'm having a bit of trouble confirming that the ZyXEL is a combination modem & wireless-N router. If it is, then you really won't get any advantages of using the 802.11g AirPort.
If the range of your ZyXEL is limited, you may find that doing either or both of the following will help: 1) Move the ZyXEL so that it is higher vs. lower in the room, that is away from any closed areas or placed in a metal cabinet, and 2) Changing radio channels. The latter is especially important in you live in an area where there are a number of competing Wi-Fi.
A good utility to find out, is iStumbler. You would use this to find these other Wi-Fi and find which have the strongest signal value. Those that do, you would also want to note which channel they are operating on, and then, change yours to one that is at least 3-5 channels away. So, for example, if you find strong ones on channels 1 & 6, change yours to 11.

HT201262 How can I Recover original (MacBook Pro) Mac os from Windows XP running Windows os

How can I Recover original (MacBook Pro) Mac os from Windows XP running Windows os because on Bootcamp I don't see Mac Os. Hear is only show Windows.
And option is restant with Window. When I reimstall windows on my Mac via bootcamp then may be I delete any one from all of (3) partition. Please help me to reinstall my Mac o

No, Please check the attachment file.

Why should i buy a macbook pro while the i7 windows laptop comes with more features and with a lesser price??

why should i buy a macbook pro while an i7 windows laptop comes with greater specs with less price???????
i love mac but i need strong points for mac to convince my father!!!!

osamawazarat wrote:
why should i buy a macbook pro while an i7 windows laptop comes with greater specs with less price???????
i love mac but i need strong points for mac to convince my father!!!!
For me, presonall, becasue the Mac will run OS X, while the windows machine will run, well, Windows. Seriously, whenever given the option, I greatly prefer to use OS X over windows without hesitation. I buy Apple hardware because I prefer OS X to Windows and have since the OS X public beta. Apple hardware is very good quality, but so are many Windows PC (Lenovo IMO makes some great hardware, if picking a Windows machine).
I use windows at work because that's what they give me, but I'd not pick it if given the choice.

HT4818 why doesnt the new macbook pro come with the windows installation disc?

why doesnt the new macbook pro come with the windows installation disc?

Because it is a Microsoft product. it must be purchased separately.

Macbook Pro MA609 (ati x1600) + Windows-7 64 bit. Any chances?

Similar Messages

Maybe you are looking for