MacBook Pro (MC118) power supply problem

Hello.
I have MacBook Pro (MC118). I'm using two power supply (home, work).
Yesterday I noticed, that macbook does not charging up. So i decided that my power supply is broken. Found another at work (from my old macbook) and used it.
But when I got home and tried to use power supply (original supply that comes with my MBP) I was surprised. It doesn't work at all.
So today I tried another power supplies at work (from few other MPB) and they all doesn't charging my MPB!
And now I have only one power supply, that actually can charge my battery.
What is wrong with my MPB?
Thanks!

Yes, it's strange! Only one charger works for this laptop.
And unfortunately it's hard to use warranty in my country (Ukraine)

Similar Messages

MacBook Pro Retina power supply is surprisingly hot

The power brick seems to get a lot hotter than my previous MacBook Pro power supplies. Anyone else noticing this?

Just got my new 2013 retina MPB, and the powersupply is charging the battery in the MPB at an amazing rate (faster than 1% per minute) but holy Hephaestus batman that power brick gets lava-hot.
This is my 10th Mac laptop (personal) and none of the other power supplies have ever heated up like this. Other Mac laptop power supplies got very hot but never too hot to touch. This retina power supply, at the temp it was at earlier today, would cause burns if left on skin. So hot I am concerned about the plastic melting. Will check but I would not be surprised if when all the lights are off there isn't a slight glow to this lava powered adaptor.
My retina seems to love it and it does not get hot in the least. As i typed this message, the charge went from 40% to 67%. (freekin awesome) and the power supply is very warm but hot yet.
I cannot help but wonder if this is not related to the powersupply on house wiring with the reversed phase... My brick does not get hot all the time and not everywhere I plug it in.
<Edited by Host>

Info on macbook pro unibody power supply or charging issues

there are all kinds of tricks to resetting things, but what if the laptop battery is dead and wont charge, are there any tricks to perform on a dead macbook pro?

Or the charger is shot...
https://discussions.apple.com/message/20307139#20307139

Macbook Battery and/or Power Supply Problem(?)

Hello everybody.
New to these forums but been a Mac user and software developer for many many years.
I've detailed the problem on my blog here: http://vanirsystems.com/danielsblog/?p=209
Basically my battery isn't charging on my Macbook but the power supply is still able to run the laptop - laptop still recognises whether the battery is in/out, have tried all of the usual things:
* leaving it to charge when its off
* leaving the power supply unplugged to get rid of static
* resetting the PSU
Battery has been working fine up until this point, was able to fully charge and run the laptop for hours... then all of a sudden there was nothing.
Battery Model is A1185.
If anyone could get back to me on the forum, or my blog or by email then I would be very thankful.
Many thanks in advance,
Daniel
[ edit ] p.s. really looking forward to trying Mac OS X 10.5 Leopard [/ edit ]
Message was edited by: danieljohnlewis
Message was edited by: danieljohnlewis

As of yesterday, I am experiencing a similar battery problem. The battery shows up in the menu bar as fully charged, and the battery indicator lights also indicate that the battery is charged.
However, my Macbook shuts off about one second after I unplug the power supply. When I try to turn it on again, it begins to boot up (the disc drive makes it's usual racket!), but before the startup sound would occur, it shuts off completely. The screen powers up but doesn't get to the grey screen before everything shuts down.
But interestingly, the battery will keep the Macbook running if I put it to sleep first. (I can unplug it while it's sleeping without a problem, as long as I plug it in again before I turn it on.)
The battery model is also A1185. I've done the battery update. My Macbook's SN starts with 4H6386N and is from Sept. 2006. Am I eligible for the two-year warranty?
Thanks so much for your help.

Macbook pro will power up but cant log on any user. Buttons on keynoard work but nothing responds to curser.

Macbook pro will power up but cant log on any user. Buttons on keyboard work and light up etc. but nothing responds to curser. Have powered off manually and tried with powercord attached but still same problem.

Have you reset the SMC?
http://support.apple.com/kb/ht3964

Severe Incompatibility between Mac Pro 2012 power supply and Tripp Lite 2400 watt Line Conditioner [switching transformer].

Severe Incompatibility between Mac Pro 2012 power supply and Tripp Lite LC2400 [switching transformer].
The Mac Pro will not power on when connected to the Tripp Lite LC2400. The Power Supply makes continuous clicking noises and repeatedly resets the Mac Pro every 3 seconds.
The same Mac Pro connected to an outlet with no Tripp Lite starts up with no problem.

Hi,
I've the same notebook. I've not had any hardlocks so far, but I've not seen so much flash movies yet. Anyway, I just tried closing running youtube-video tab on Kde4 + enabled desktop effects -> Everything's fine.
Anyway, perhaps we can collect some issues and solutions in this thread. Here are problems, that I encounter:
- restart does not work
- errors during boot:
[ 2.399277] pnp 00:0b: [irq 23]
[ 2.399308] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
[ 2.932179] pnp 00:0c: can't evaluate _CRS: 12311
[ 14.616662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 14.616771] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 14.616792] iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
[ 14.616904] iTCO_wdt: probe of iTCO_wdt failed with error -16
[ 9.262898] sdhci-pci 0000:0b:00.1: SDHCI controller found [1217:8321] (rev 5)
[ 9.262920] sdhci-pci 0000:0b:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 9.262966] sdhci-pci 0000:0b:00.1: Invalid iomem size. You may experience problems.
[ 9.263176] sdhci-pci 0000:0b:00.1: setting latency timer to 64
Issued solved:
- in order to make nvidia graphics working you have to disable Optimius in BIOS.
- Battery not recognized -- fixed after recend updates
- grub2 does not work. As soon as grub2 loads, the laptop reboots. -> stick to grub1 -- works now (either I did sth wrong the first time or a new version of grub2 fixes this issue)
- in order to make the touchpad work properly install psmouse-elantech from AUR
update: this is only a half-solution. vertical scrolling on the right edge works but graphical tools which rely on x11-input-synpatics still don't work. However, everything works fine with kernel 3.3. Once this in the main arch repos you won't need psmouse-elantech anymore.
Last edited by knue (2012-03-06 23:26:26)

User Contributed Tips, MacBook Pro (Original) Power and Batteries, MB Pro

*The following User Contributed Tips are located in the MacBook Pro (Original) > Power and Batteries on a MacBook Pro forum:*
None at this time.
*The following related tips are located in other areas of Apple Discussions:*
neuroanatomist - Apple notebook batteries – maintenance and troubleshooting
http://discussions.apple.com/thread.jspa?threadID=1764220
Publish date: Oct 23, 2008
See Also User Tips Library

Frani wrote:
Hi Martin, thanks for your response, I'll have a good read through that article. Just to fire some more facts at you:
My superdrive has been playing up intermittently for a while. Sometime it wont read the content on CDs / DVDs - usually copied / PC & Mac written discs, not commercial ones. However I haven't been trying to read and discs when the problems have happened.
I upgraded my hard drive from a 320Gb to a 500Gb disc about 6 months ago and the switch was done by a competent Apple Authorized Service Provider. For a few weeks after the new drive had been installed there were a few occasions where the disc was making some noise, like a clicking noise. This would start and go on for a minute or so then seem to dye down and stop. It happened a total of about 10-15 times but when I reported this to the person that fitted my new hard drive he assured me he felt it was unlikely to cause a problem. he did say that if it went on to be an issue they would replace the drive of course. Like I said this was all done about 6 months ago and the clicking noises only happened a handful of times in the first month or so after the install and it did have one bad crash in this time but since then it has been fine.
I just wondered if you thought either of the above might be a cause of the issue?
Thanks
Frani,
I think the optical drive is not your problem, but it sounds like it needs replacement. There's a 75% chance it's your hard drive. Read the article on kernel panics. It takes time to diagnose the issue, but if you get TechTools and run a full diagnostic, you might find out if it's a hardware issue. But fix permissions and clean out your cache first, just in case it's a simple fix.

Hello THIS IS RAZA I GOT A MACBOOK PRO I HAVE A PROBLEM. PROBLEM IS how to solve this problem i have uploaded in .... all the time few days later on i face this problem in safari..... anyone can help me please.....thanks Screen Shot 2015-03-21 at 10.

Hello
THIS IS RAZA
I GOT A MACBOOK PRO
I HAVE A PROBLEM. PROBLEM IS how to solve this problem i have uploaded in .... all the time few days later on i face this problem in safari..... anyone can help me please.....thanks

This is a scam. Do not phone these people, at best they will charge you for unnecessary 'cleaning' and at worst they will gain access to your Mac and steal your data. You've probably managed to install some 'adware' which is producing this fake warning. 'Adwaremedic' should remove it and is safe to use - please see
http://www.adwaremedic.com/index.php

I unplug my MacBook Pro from power and external speaker and I hear incremental beeps and sounds as if email being sent. Doesn't' stop until I close email

I unplug my MacBook Pro from power and external speaker and I hear incremental beeps and sounds as if email being sent. Doesn't' stop until I close email. Not sure what is happening our what if any emails are being sent.

You can install Temperature Monitor and have a look if the CPU oder GPU oder something else went to hot. The processor has a built in safety mechanism to shut down the computer before taking damage.

HT4906 my iPhoto i can't open it on my macbook pro what is the problem?

my iphoto i can't open it on my macbook pro what is the problem?

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What I can do?

Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What can I do?

Try booting to the Recovery drive, running Disk Utility and Repair disk and Repair Permissions.
1. Reboot and immediately hold down command and R (two keys).
2. When you see the screen shown on this page, select Disk Utility and continue.
3. When DU is running, select the hard drove on the left, First Aid and Repair Disk.
4. After Repair Disk, click Repair Permissions.
Quit DU and restart.

Power supply problem a little better after unplugging imac for 24 hours

Hello,
I'm currently having power supply problems (at least I hope it's the power supply and not the mother board), similar to many others I've seen on these boards. What I've noticed is that if I unplug my iMac for about 24 hours I can get it to run again for a little while. Unplugging it for a few minutes (or even 8 hours) doesn't seem to help. My iMac won't get much further than the starting chime before it loses power. But it seems to me that unplugging it for 24 hours has gotten me between 5 days to 5 hours of use before I unexpectedly lose power.
Is there anything to account for this or am I just imagining things? Ultimately, I don't think the answer will help me much, but I am curious to know. I'm taking my iMac to a Mac Genius tomorrow to see if they can help diagnose the problem. I saw a little hit in my video today, which was a first, so I suspect the problem may be getting worse. I'll probably be buying a new power supply soon.

I'm having the same problem. They say to restart you have to unplug the power, wait 10 seconds and then plug it back in but apparently it's not enough. I have to unplug for about 30 seconds, plug back in, and wait anywhere from 30 minutes to several hours before it'll start up again properly. The last time I had this issue was in october '06- when I had a new logic board and power supply put in. Now I'm worried because my applecare is expired by about 3 months. I bought the computer in feb. '05. I hope a new board doesn't cost more than what the computer itself is worth but I'm afraid that'll be the case...

HT204382 Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no d

Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no diference

Download and install the free VLC for Mac - that should work:
http://www.videolan.org/vlc/download-macosx.html

Since updating my iPhones, iPad and MacBook Pro I'm having problems with Calendars...

Since updating my iPhones, iPad and MacBook Pro I'm having problems with Calendars - I keep all the details of my work schedule on Calendars but since updating everything I am notified at 9 a.m. before each of my days off. Can someone please tell me how I can stop this? Also, how can I change that time (9a.m.) if I do want to be notified about something?
Thanks.

troubleshooting message http://support.apple.com/kb/ts2755
Do you have MMS turn on in Settings?
Are you provisioned by your carrier to use MMS?
Lastly, give your phone carrier a call, as MMS is a carrier feature.

My MacBook Pro's power cord just died yesterday - no power. I borrowed my husband's to charge my computer and now his is dead too! Is this my computer doing this?

My MacBook Pro's power cord just died yesterday - no power. I borrowed my husband's to charge my computer and now his is dead too! Is this my computer doing this?

there are only 2 statistical probabilities of both charger blocks (NOT the cord as you report) going at the same time.
and what "goes" is one of the 2 capacitors inside them.
A: bad power on your outlet (more likely)
B; also likely is a defective IO board in your macbook causing the charger blocks to go kaput
Contact Apple for appt for free diagnostic examination in shop

MacBook Pro (MC118) power supply problem

Similar Messages

Maybe you are looking for