Macbook pro messed up screen on startup

i have a macbook pro 2nd gen 2012 running os x mavericks
i recently got back home from vacation and unpacked everything, including my laptop
i started it up, but it showed strange screen without the apple logo showing, the sounds are fine
it started darkening a little bit into grayish color
i tried restarting but does the same thing over and over again
what is happening??? what should i do?

Is this MBP a retina or non-retina?
here is a comprehensive trouble shooting guide:
https://discussions.apple.com/docs/DOC-3353
Go through steps 1 to 5.
Let me know what the result is.
Ciao.

Similar Messages

  • My Macbook Pro Showing White Screen At startup

    Macbook pro showing white screen after loading window
    i think its not booting to hdd
    What shoud i do??
    Message was edited by: Krishnaraj7777

    Krishnaraj7777,
    you can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the  OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Do you get past the white screen now?

  • 13" Macbook Pro Beeps Black Screen on Startup

    Hi all,
    My 2 month old 13" Macbook pro won't startup and I get a series of beeps and optical disc noise at start-up.
    My only modification to the machine is the addition of an intel X25 SSD drive that I have had installed since day 2 and two 2GB sticks of ram with no problems whatsoever.
    Yesterday, I ran the battery down all the way until the machine turned itself off (I guess it went to sleep or some hibernation mode).
    I plugged the MPB in and charged it over night. Woke up this morning and the charge light showed green.
    I tried turning it on and all I got were some beeps (longish) and the optical drive sounds like it is making some noise, but there is no disk in the drive. The beeps/optical drive noise seem to just cycle on and off and the machine never boots up.
    Any help would be much appreciated.
    Thanks in advance!

    Thanks for the replies. I'm on vacation at the moment and don't have the proper tools to remove the aluminum cover to get at the RAM.
    Upon startup I hear a beep folowed by the optical (DVD) drive making some noise as if it wants to read a DVD but there is nothing in the drive. Then I get another beep followed by the optical drive noise. This happens cyclically like this indefinitely. I am using the laptop to charge my iphone. While it's beeping/cd drive is making noise I can still charge my iphone, so I think the battery is ok.
    Thanks again for you help!

  • My macbook pro shows blank screen when I started..help me..

    My macbook pro shows blank screen when I started . (It's like in same state when power off. ) fan sound and hard disk is running. So i connected it Through external monitor via mini display to VGA cable. I can see everything on external monitor. My display of Mac needs to change? How much it cost ?? I found so many forum discussion said that if nvedia card is faulty then its happen...let me know suggestions...I given it to apple care service station n they r telling yr display needs to change its cost me a lot.. I can't afford. And can't spend that much for 3 yr old version as new versions of macbook pro is cost vice reasonable.. can I have any suggestion?

    If running 10.7 or later hold down Command-R at Startup.
    This should invoke recovery Mode.
    Choose Disk Utility.
    Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
    Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
    If errors, run again until it comes clean or gets stuck.
    Report any error messages.

  • My macbook pro has white screen with flashing folder.

    my macbook pro has white screen with flashing folder.
    i called the repair services and they say its hard disk problem
    so i would like to ask everyone here if the problem would be solved if i just changed the original hard disk to a ssd myself or do i realy need to let them repair for me.
    ps : i dont have warranty

    See A flashing question mark appears when you start your Mac. I would suggest you try reinstalling OS X.
    If you are running Snow Leopard:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    If you are running Lion or Mountain Lion:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • I dropped my macbook pro and the screen is broken can i still use it with an external monitor? Or can I or how do I transfer hard drive files to my mac mini?

    I dropped my 17" macbook pro and the screen is broken. Can I still use it with an external monitor? When I plugged it into a monitor I had used it with before, I'm not able to see anything on the macbook screen to control it. It came on but I just got the blue screen with nothing else after typing in my password. (Didn't see the password form just assumed it was there somewhere and it did go from space to blue screen but no desktop icons, files, dock strip at top or anything else, just blank blue screen) so I can't access the system preferences.
    Or can I / or how do I, transfer hard drive files to my mac mini? If not salvageable as is can I pull out the hard drive and make it an external harddrive? In otherwords is anything salvageable? It seems it's coming on I just can't access anything. BTW I was told it would cost aprox $1000 to replace the screen! I paid almost $4000 for this thing and it was running great - makes me sick to lose it!

    I'd like to promise you that everything will be fine if you just get the monitor going - but it's hard to know what the hardware damage might be. It might be the monitor, or the damage might be greater.
    Your best solution would be visit your local Apple Store and let them know what your situation is. They have access to diagnostics you don't, and they might be able to the best way to save your data and keep you computing. It's still not covered, but they can tell you what your current options are.
    Um, you might consider investing in a backup drive.
    And there other repair options, too. Powerbook Medic http://www.powerbookmedic.com/xcart1/pages.php?pageid=67 offers reliable repairs, and quotes prices well under Apple's.

  • My mid 2010 macbook pro 13 inch screen is cracked, how  much will it be to fix?

    My mid 2010 macbook pro 13 inch screen is cracked, how much will it be to fix?

    https://www.techrestore.com/mac/
    http://www.dttservice.com
    http://www.myservice.com/macbookpro.html
    http://www.ifixit.com/Device/MacBook_Pro
    http://www.PowerbookMedic.com

  • How do i connect my macbook pro to another screen (a fujitsu siemens) i got the cable for it but i want to know the settings so i transfer desc to the fujitsu screen.

    How do i connect my macbook pro to another screen (a fujitsu siemens) i got the cable for it but i want to know the settings so i transfer desc to the fujitsu screen.

    Welcome to Apple Support Communities
    If you have the cable, just connect it to both and the desktop will show up on the external display. Then, you can select different modes, changing arrangement in System Preferences > Displays > Arrangement, or using shortcuts > http://support.apple.com/kb/ht5019

  • Is it possible to connect my 2008 black macbook, to my new 2014 macbook pro retina display screen to make a dual monitor. If this is possible what cables would I need to buy?

    Is it possible to connect my 2008 black macbook, to my new 2014 macbook pro retina display screen to make a dual monitor. If this is possible what cables would I need to buy?

    You can try using Screen Sharing in the Sharing preferences. Or try a third-party utility such as ScreenRecycler.

  • NEW Macbook Pro anti-glare screen choice

    Hi,
        I did not see the NEW Macbook Pro anti-glare screen choice.
          Did Apple Stop offering the anti-glare screen option on the NEW 2013 Laptops?
                      THANKS!!  - Randy

    If you look at the specifications for the 15" non-retina MBPs, you will note that anti-glare option is available.
    Ciao.

  • MacBook Pro and Samsung screen compatibility

    Hi there
    I have a 13" MacBook Pro 7,1, screen resolution 1280 x 800.  I also have a Sony HDVD camera [HDR-SR11E].
    I am thinking of buying a Samsung monitor for ease of video and picture editing -- SAMSUNG 2333HD, which has a 23-inch widescreen display; 16:9 Aspect Ratio; 1920 x 1080 Resolution; 300 cd/m2 Brightness.
    Apparently it has "two HDMi sockets, a DVI input and a VGA entry"
    Is the aspect ratio of the Samsung compatible with my Mac and do I have to purchase any extra peripherals to make these pieces of equipment work together?
    Thanks for any clear, simple help anyone can give

    There are two different models.
    http://www.miglia.com/products/video/tvmini/index.html
    http://www.miglia.com/products/video/tvminihd/index.html

  • I1 DISPLAY PRO and DISPLAY MACBOOK PRO 15 " GLOSSY SCREEN

    "Ciao" to all.
    I recently  i bought a macbook pro 15 "glossy screen. Would like to try to calibrate the monitor with a i1 DISPLAY PRO produced by X-Rite. Some of you have already tried? with what result?
    Many thanks for the responses.

    I talked to AppleCare; they referred me to Customer Service to arrange a return of the MBP and shipment of a new replacement. They said since it was a defect out of the box not to repair it, just go for a replacement.
    Sounds good in the long run, but being without it for a few days will be painful!
    Message was edited by: PJR1

  • Trying to defrag my macbook pro(2010)with drive genius startup disc and the disc is stuck in my computer.  How do I get it out??

    Trying to defrag my macbook pro(2010)with drive genius startup disc and the disc is stuck in my computer.  How do I get it out??

    Try these options:
    Credit Kappy.
    Look at these discussions:
    https://discussions.apple.com/message/6369213#6369213
    https://discussions.apple.com/docs/DOC-4032
    Ciao.
    Message was edited by: OGELTHORPE

  • My macbook pro out of screen when i switch from windows to mac

    my macbook pro out of screen when i switch from windows to mac , mac is running but out of screen , what should i do??

    my macbook pro out of screen when i switch from windows to mac , mac is running but out of screen , what should i do??

  • Tiny crack in Macbook Pro 13 inch screen?

    There's this tiny v-shaped crack in my macbook pro 13 inch screen. Inside the v shaped crack it's cloudy and i can't see the screen clearly through the v shape. The crack itself is rainbow colored and at first I thought it was water or something. But it didn't come off. This is about a three week old macbook pro and I haven't dropped it, slammed the cover, or anything. I've been so careful. I just noticed it a few minutes ago. I was doing stuff on my laptop, and my eyes wandered.. To the little crack. What could it be? Will Apple Care cover this? I swear I didn't do anything to it.
    Julia

    Apple may class this as accidental damage, whether it was or not as it could be hard to prove. However, it won't hurt you to take it into Apple or phone them up to see if they can do anything, especially if you've only had it a week.

Maybe you are looking for

  • How to print out page number

    I want to print page number with every page how it possible..... So that I would come to know how many printed documents are left.... Please reply soon

  • Itunes only syncs PART of my library to the iPhone

    I made some modifications to my iTunes library a few weeks ago, and only recently noticed that my iPhone suddenly has NO music. iTunes looks completely normal; all my music is there, all playlists, etc. When I go to sync just a few playlists to the i

  • Intel Quad Core for Premiere - is this a smart choice ?

    Hi everyone, I'm wondering if Intel's new Quad Core processor ( 2.4 Ghz ) will give a good boost to system performance over an older Intel 3.2 Ghz Ht chip. I have seen test results where a 1.6 ghz dual core Intel processor has lost in speed tests vs

  • AR Invoice Original 3 Copies should be printed in one command

    Hi Gurus, Requirement is When I click on print command, system should print ORIGINAL , DUPLICATE, TRIPLICATE SO on...at once I have seen a thread already in SDN But i needed more information on the inputs.... If i need to develop an addon  please pro

  • Printing through Photoshop with applescript

    I'm trying to set up a script that will automatically print a certain quantity based on user input. I can't figure out how to access the "Copies" part of the print menu. Is that possible? This is what I have so far. set myQuantity to the text returne