Macbook pro mid 2009 Hard Drive Replacing

Hello my name is Javier, I amcontacting you for a problem I have on a mid 2009 Macbook Pro 2.8GHz (MB986LL /A), This is a computer, which I paid more than 2200€ less than 2 years, the date of purchase was July 17, 2009.
Serial number: W8925AZT644
Registered to Maria del Carmen
I have problems and Apple does not want help ☹
You will see the problem withthe computer for which you are annoyed by the hard drive where smart verification failsand tells me I have to changethe hard disk.
I tried not to disturb and replace the hard drive myself, but this team and its driver gives problems with SATAdrives that do not bear the Apple firmware, which are described in your techsupport forums
https://discussions.apple.com/thread/2054387?start=0&tstart=0
https://discussions.apple.com/thread/2267098?start=75&tstart=0
As you can see there two threads with literally hundreds of pages on the incident.
The problem is that the same hard disk carrying thenotebook without the Apple firmware is worth € 52 but if Apple bought the costis 300 €, the same drive just with different firmware but it makes that thehard drive "NO APPLE "problem which is an abuse by Apple against itscustomers and a clear assault on the consumer.
What hard drive could buy?, do not want problems, Can anyone give their experience?
I've been watching this that is very similar to what has by default
HTS545050B9A300 500 GB (500,0 GB, Travelstar 5K500.B, MAESTRO) AABIJ5
Help me Please!!!!!!!!!!!!!!!!!!!!

Seagate is the must compatible hard drives with Macs
And you can see how to replace it in the link below
http://www.ifixit.com/Device/MacBook_Pro_17%22_Unibody
But keep in mind that you will void apple's warranty any you may damage your computer.

Similar Messages

13" MacBook Pro (mid 2009) hard drive and memory upgrade

So I'm looking to upgrade my hard drive and memory for my 13" MacBook Pro. I'm still wondering just how easy it will be to recover my data, and put it back onto my new drive. I currently have everything backed up to an External drive using Time Machine. If I back it up, and then do the replacement, is it really as simple as it sounds to start it up, put in the Mac OS disk and then restore from a Time Machine backup? I have 150 Gb worth of data and would be ticked off if I can't get it back to my MacBook Pro. Any expertise out there? The actual installation looks easy, but it's the loading the new drive that has me concerned. When I install the new drive, is there anything else I need to do to prep it? And how do I do it if there is? Looking at a 500 gb or even 1 Tb Western Digital drive.

I would say get yourself an external enclosure. Put the hard drive that comes out of your MacBook pro into the enclosure. Put in the new hard drive. Boot up from the external hard drive, use disk utility to format the new drive. Use Carbon Copy Cloner to move everything as it is from old hard drive to new internal one. Re-boot to internal drive, you are done.
Carbon Copy Cloner is a freeware get it from download.com

Macbook Pro mid 2010 hard drive beep, click, freeze BACK after Lion?

I have a mid-2010 Macbook Pro and I had the same problem that was described here:
https://discussions.apple.com/message/9817201?messageID=9817201#9817201
https://discussions.apple.com/message/15055210#15055210
Like many others, mine stopped beeping after the Software Update released by Apple when they admitted there was a problem. However, since I've upgraded to Lion, the hard drive is back to its old ways of beeping, clicking, and freezing. Anyone else having this problem again? Anyone else think this is an odd coincidence? I called support and, after going through the usual troubleshooting, they escalated to a supervisor who wanted me to go through the same troubleshooting only to tell me that I should take it into an Apple Store where they'll likely send it in for testing. I haven't done it yet because it's rather inconvenient to have to jump through the same hoops and be without my computer again when the problem seems fairly obvious based on my history with this machine. I'm actually hoping it's hardware failure at this point so I don't have to wait for them to acknowledge another problem.

Hi Luke,
The click/beep was happening more and more and was starting to drive me nuts.
I contacted Apple/Seagate but neither were helpful at all.
I went to my local Apple representative but they said they would need to hold on to my laptop for 1-2weeks while they checked out the issue and then replaced the HDD and the same model, this was something I couldn't do as I need my laptop for work everyday.
Apple's online support (+ call) just told me to bring it into my local Apple representative so that went nowhere.
In the end I shelled out my own money to fix Seagate/Apples problem and bought a Seagate Momentus XT 500GB drive which I have had no issue with since I got it, about 6 months.
It also speeds up my Mac with the inbuilt SSD cache. I recommend it.
http://www.seagate.com/www/en-us/products/internal-storage/momentus-xt-kit/
I also just saw that Seagate now offer a 750GB model.
FYI, I had this click/beep issue in Snow Leopard too.
For anyone doing a google, here is the exact HDD I have now which works well:
ST95005620AS:
Capacity:          500.11 GB (500,107,862,016 bytes)
Model:          ST95005620AS
Revision:          SD26
Serial Number: ***
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Rotational Rate:          7200
Medium Type:          Rotational
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified

Which hard drive do you recommend macbook pro mid 2009

Which hard drive does Apple recommend as a replacement for the MacBook Pro Mid 2009??

I have a MacBook Pro (2009):
Model Identifier MacBookPro5,4
I tried severa Hard Drives, and none of them works, apparently there is a problem with the EFI firmware of the controler. This is what one of the support guys from Hitachi told me.
Apparently, the controler only handle STA I and it does not support SATA II, although the last firmware fore this MacBook pro (EFI Firmware update 1.7) says that it support SATA II. I am not sure if all of this is correct. But I will like some advice which Hard Drive will work whith this computer.
Thanks

I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my 10.6.8 back

I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my previous 10.6.8 back ... hope there is a way to do so

Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Change Hard Drive MacBook Pro mid 2009

My hard drive is dying (the beach ball appears, concurrent with a sound that can only be described as a squeak, coming from, I assume, the hard drive. Then, the beach ball freezes and the machine can only be revived by a hard restart)
My Question; can I put a Seagate Momentus XT ST750LX003, 750GB, Bulk 2.5 ", 8GB Flash, SLC, 32MB Cache, 7200 U / min • SATA III 6.0Gb / s in a Macbook pro Mid-2009 15"?
Would be very grateful for a reply

Ask as many questions as you like, OK.
Basically yes they are all backward compatible except for the drives and or firmware on the drives that refuse to be backward compatible. Which drive they are I have no idea but mostly they are SSDs and not spinning HDD. The transfer rate on any spinning HDD is slow enough, even on the XT series, that if you have a SATA II bus the drive can't really fill it up, IE can't go over its theoretical Rated transfer speed and or the actual data rate it can handle.
The problem occurred on 2009 MBPs because some of the original cables used could not handle the extra data rate the XT series drive could deliver, both reading and writing to the drive.

Replacement HD for my MacBook Pro Mid 2009?

Hello
I have a MacBook Pro Mid 2009 15" that crashed and failed on me, and I'll need to have the internal hard drive replaced. I'll be passing on this computer to my mom after it's repaired.
Is there a specific internal hard drive I have to get that fits my MacBook? because I noticed on BestBuy that some are 2.5" and others are 3.5". Are there ones that work better with some Apple products and some don't? What would you recommend me?
Any help or recommendations would be appreciated! Preferably something from BestBuy or FutureShop carries. My budget is $90 - $125.

Also - the one I'm looking at and like is a 2.5" ... Does this matter? Will it fit properly in my Macbook?
This one - http://www.newegg.ca/Product/Product.aspx?Item=N82E16822178340

How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?

How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
My optical drive is non-functional and I want to dual boot with win7. The only problem is my macbook does not boot from USB at all, even when I hold th ALT key down when it is starting up.
-I have a flashdrive with win7 on it.
-I mounted the ISO of win7 with toast for bootcamp to do its thing.

Good luck.
Consider this a bump so that hopefully someone with better news spots your thread.
Allan

MacBook Pro mid 2009 HDD to a Kingston SSD SATA drive - Problems

Hi
I own a MacBook Pro Mid 2009 and I'm running OSX Mavericks with Windows 8.1 Pro Bootcamp. I wanted to upgrade to an SSD drive and after reading the great reviews on Amazon, I purchased a Kingston 240GB SSD 2.5" V300 SATA 3.
Many of the buyers had installed the SSD drive on Macbook Pro, including "mid 2009' models without any real problems but I've just spent the best part of 3 hours trying to install the drive but so far, it has not worked and the problem seems to be that, although the Acronis True Image software that comes with the drive to 'clone' the source drive and install it onto the destination drive (new SSD drive), I get a message which states, "WARNING: After migration, the O/S will not be able to boot from the destination disk in the BIOS - If you want to boot from the destination disk after migration, you need to enable UEFI booting in your system and then restart".
During one of my first attempts to install the SSD drive, I removed the original HDD from the MBP and installed it in the supplied 2.5" caddy and and connected it to the MBP via the USB cable supplied then installed the new Kingston SSD SATA3 drive in the MBP, powered up and then rebooted. The Acronis bootable software launched and after choosing 'clone disk', cose source and destination drives, I got a message saying: "The selected disk will be migrated as is (disks layout will remain GPT)". "After operation completion, operating systems will not boot from the destination disk in the BIOS".
My system has the latest available Boot ROM Version (MBP.00AC.B03 and the SMC Version is 1.47f2 and as far as I am aware, Apple computers have no BIOS that you can access like on Windows computers and instead use EFI instead.
Both drives had Extended Journaled GUID Partitions on them and what baffles me is that other buyers of these Kingston SSD SATA3 drives appear to have managed to install the SSD drive, but I've had to give up.
I would really like to get the SSD drive working but so far I've failed. Any advice would be appreciated and I'll try it out before reluctantly returning the drive for refund.

Hi
Thanks for your reply.
Yes the Acronis software is Windows but I read through a lot of reviews on the Kingston SSD SATA 3 drives Amazon and from what I can gather, after removing the original drives and installing that in the 2.5" caddy and then installing the new SD drive in the Macbook, those buyers then used the software to boot from and clone the source drive to the new drive.
I'm not sure if I mentioned it in my first post, but I did use the Disk Utility in Mac OSX and erased, formatted and partitioned the drive and then pushed CMD + R at start up but I was not able to install a copy of the OS because the drive was not recognised.
I think I also used the disk utility in Windows and then tried again in OSX but no luck. I'm no expert but as stated above, the issue seems to be that the SSD drive is not booable in the BIOS (or Mac equivalent).
The SSD drive is SATA 3 and I'm sure that the SATA ports are SATA 1 on my MBP and maybe that the problem Perhaps someone can confirm this.

I just replaced the hard drive on my macbook pro, reformatted new hard drive and copied over a backup from time machine now I have a kernel panic message (you must restart) - what do I do now?

i just replaced the hard drive on my macbook pro, reformatted new hard drive, installed a back up from time machine and now have kernel panic ( you must restart your computer) what do I need to do?

If you're able to boot, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents – the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.

My optical drive on my macbook pro mid 2009 series is not working all the time.

I have a Macbook Pro mid 2009 series and just recently my optical drive is not working all the time. At times it decides to not spin a disk that has been inserted in the drive. I am currently deployed in Afghanistan and this is one of the very few things i have to distract me from the day to day haul. This is something that just started to happen and its very fustrating since i have limited support for this.

Another help source (if you haven't already done so).
Go to your OS Help Menu. In the search field type dvd
Click on all the troubleshooting topics & Support Articles that pertain to your issue.
You can also do the same in Disk Utility. Open same up.
At the bottom left of the window, click on the purple button w/the "?" in the middle.
This will bring up the Help Menu.
===============
Try a different brand. Top forum favorites
CDs
FUJI
TDK
Verbatim
DVDs
Maxell
Verbatim
==============
Apple's Disc Burning Quick Assist
http://support.apple.com/kb/HT2801 Apple Portables: Troubleshooting the slot load optical disc drive
Make sure the DVDs are not dirty, smudged and/or scratched.
http://support.apple.com/kb/TS2000 Mac doesn't start up from install disc
http://support.apple.com/kb/HT2801 Apple Computers: Troubleshooting the slot-loading SuperDrive
*** Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs. ***

Can intel 520 series SSD be installed in macbook pro mid 2009

This is some of the information for the 180g SSD I want to replace my HD in my 13" macbook pro mid 2009
25nm NAND Flash Memory
2.5” form factor
SATA 6.0 Gb/s performance
My computer though has this information for its hard drive:
Product:          MCP79 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          1.5 Gigabit
Description:          AHCI Version 1.20 Supported
I know that the SATA 6.0 will be backwards compatible with my connection, but I was wondering if I am going to hit any problems. I am going to do a full time machine backup so I can have everything cloned onto the SSD, but want to know before I buy the SSD

Recently installed same type of SSD (Intel 520 120GB) in our 2010 Macbook (white) and runs just as well as its big bro. No problems at all. Storage isn't an issue since most stuff's in the cloud these days and we carry large files around on a USB stick. Way to go!

Can i install 1TB to macbook pro mid 2009

hello,
i have a macbook pro mid 2009, 2.66ghz 2 duo and i want to install a new HDD
can i install 1TB??
what is the biggest HDD storage that the notebook can handle??
and how do i install my mac os x to the new HDD?
thank you.

The MacBook Pro's take 2.5" SATA hard drives. If you are going to replace the drive, now would be the time to upgrade to a 7200rpm drive; about the largest capacity you will find is 750GB. Also, since this will be your main hard drive, stay away from any green or blue drives; the supposed energy saving features will also reduce performance. May I suggest looking at OWC for their recommendations about hard drives for your specific model MBP.
You install OS X via the recovery DVDs that came with your MBP. One is for OS X, the other contains the Apple applications (iLife, etc). Of course, that will install the version of OS X that originally came with your MBP (a 2009 MBP probably came with Leopard 10.5). If you don't have the recovery DVDs, or want to install a later version of OS X, then I suppose you will need to purchase a Snow Leopard DVD and install that before upgrading to Mt. Lion.

How do I reinstall lion using time machine (Macbook Pro mid-2009)?

I am going to replace my hard drive (and add RAM) on my Macbook Pro (mid-2009) myself. I have Lion (10.7.4) currently, and have backed up via time machine on an external drive. I don't have Lion on a usb, and from what I read, Lion Recovery via internet isn't applicable for my macbook (pre 2010). Is the time machine backup a bootable drive? If so, then am I all good so long as my backup is completed prior to replacing the hard drive? If not, how do I create a bootable drive so I can get back to "normal"?
Thanks! :-)

To determine if your Time Machine backup has a Recovery HD on it restart the computer. Immediately after the chime press and hold down the OPTION key until the boot manager appears. A Recovery HD option should appear on your Time Machine backup drive. Select it and click on the arrow button below the icon. If all is well your machine should boot into the Recovery HD utilities screen.
If all is well then after you replace your drive boot from the Time Machine Recovery HD. Start by:
Drive Preparation for Lion
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is an entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After finishing formatting quit DU and return to the main menu. Select the option to Restore from a Time Machine backup then click on the Continue button.

Macbook pro mid 2009 Hard Drive Replacing

Similar Messages

Maybe you are looking for