MacBook Pro mid 2009 HDD to a Kingston SSD SATA drive - Problems

Question

Hi
I own a MacBook Pro Mid 2009 and I'm running OSX Mavericks with Windows 8.1 Pro Bootcamp.  I wanted to upgrade to an SSD drive and after reading the great reviews on Amazon, I purchased a Kingston 240GB SSD 2.5" V300 SATA 3.
Many of the buyers had installed the SSD drive on Macbook Pro, including "mid 2009' models without any real problems but I've just spent the best part of 3 hours trying to install the drive but so far, it has not worked and the problem seems to be that, although the Acronis True Image software that comes with the drive to 'clone' the source drive and install it onto the destination drive (new SSD drive), I get a message which states, "WARNING:  After migration, the O/S will not be able to boot from the destination disk in the BIOS - If you want to boot from the destination disk after migration, you need to enable UEFI booting in your system and then restart".
During one of my first attempts to install the SSD drive, I removed the original HDD from the MBP and installed it in the supplied 2.5" caddy and and connected it to the MBP via the USB cable supplied then installed the new Kingston SSD SATA3 drive in the MBP, powered up and then rebooted.  The Acronis bootable software launched and after choosing 'clone disk', cose source and destination drives, I got a message saying:  "The selected disk will be migrated as is (disks layout will remain GPT)".  "After operation completion, operating systems will not boot from the destination disk in the BIOS".
My system has the latest available Boot ROM Version (MBP.00AC.B03 and the SMC Version is 1.47f2 and as far as I am aware, Apple computers have no BIOS that you can access like on Windows computers and instead use EFI instead.
Both drives had Extended Journaled GUID Partitions on them and what baffles me is that other buyers of these Kingston SSD SATA3 drives appear to have managed to install the SSD drive, but I've had to give up.
I would really like to get the SSD drive working but so far I've failed.  Any advice would be appreciated and I'll try it out before reluctantly returning the drive for refund.

Answer 1

Hi
Thanks for your reply.
Yes the Acronis software is Windows but I read through a lot of reviews on the Kingston SSD SATA 3 drives Amazon and from what I can gather, after removing the original drives and installing that in the 2.5" caddy and then installing the new SD drive in the Macbook, those buyers then used the software to boot from and clone the source drive to the new drive.
I'm not sure if I mentioned it in my first post, but I did use the Disk Utility in Mac OSX and erased, formatted and partitioned the drive and then pushed CMD + R at start up but I was not able to install a copy of the OS because the drive was not recognised.
I think I also used the disk utility in Windows and then tried again in OSX but no luck.  I'm no expert but as stated above, the issue seems to be that the SSD drive is not booable in the BIOS (or Mac equivalent).
The SSD drive is SATA 3 and I'm sure that the SATA ports are SATA 1 on my MBP and maybe that the problem Perhaps someone can confirm this.