Macbook Pro mid 2010 hard drive beep, click, freeze BACK after Lion?

I have a mid-2010 Macbook Pro and I had the same problem that was described here:
https://discussions.apple.com/message/9817201?messageID=9817201#9817201
https://discussions.apple.com/message/15055210#15055210
Like many others, mine stopped beeping after the Software Update released by Apple when they admitted there was a problem. However, since I've upgraded to Lion, the hard drive is back to its old ways of beeping, clicking, and freezing. Anyone else having this problem again? Anyone else think this is an odd coincidence? I called support and, after going through the usual troubleshooting, they escalated to a supervisor who wanted me to go through the same troubleshooting only to tell me that I should take it into an Apple Store where they'll likely send it in for testing. I haven't done it yet because it's rather inconvenient to have to jump through the same hoops and be without my computer again when the problem seems fairly obvious based on my history with this machine. I'm actually hoping it's hardware failure at this point so I don't have to wait for them to acknowledge another problem.

Hi Luke,
The click/beep was happening more and more and was starting to drive me nuts.
I contacted Apple/Seagate but neither were helpful at all.
I went to my local Apple representative but they said they would need to hold on to my laptop for 1-2weeks while they checked out the issue and then replaced the HDD and the same model, this was something I couldn't do as I need my laptop for work everyday.
Apple's online support (+ call) just told me to bring it into my local Apple representative so that went nowhere.
In the end I shelled out my own money to fix Seagate/Apples problem and bought a Seagate Momentus XT 500GB drive which I have had no issue with since I got it, about 6 months.
It also speeds up my Mac with the inbuilt SSD cache. I recommend it.
http://www.seagate.com/www/en-us/products/internal-storage/momentus-xt-kit/
I also just saw that Seagate now offer a 750GB model.
FYI, I had this click/beep issue in Snow Leopard too.
For anyone doing a google, here is the exact HDD I have now which works well:
ST95005620AS:
Capacity:          500.11 GB (500,107,862,016 bytes)
Model:          ST95005620AS
Revision:          SD26
Serial Number: ***
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Rotational Rate:          7200
Medium Type:          Rotational
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified

Similar Messages

MacBook pro 13" 2010 hard drive died in less than 2 months, what to do

Hey apple forums, ran into issues today and I want to know how to handle the situation. I bought a MacBook pro 13" (2010) model on may 1st 2010, it died 9 days latter, best buy replaced it free of charge (even though I had to fight them to do so) this next one ran fine from may 9th 2010 to June 22 2010, just shy of two months. What happened? The **** hard drive died (which by the way is a crappy seagate, I only buy western digital drives as they have NEVER failed me in the 10 years I have used them). The way i know this is because I am a pc repair technician and have run diagnostics and they all say drive is dead. When boot up (or attempt) the apple logo pops up and shows a progress bar (which I have never seen before) it stays on for 10 seconds and then disappears, then the normal circle loading animation begins, then my MacBook pro starts getting ridiculously hot and never loads up Mac os x 10.6.4. I am then forced to hold the power button for 10 seconds to kill the power. I can boot into windows 7 which tells me that it is strongly recommended to perform a disk check which hangs midway, or if I cancel it before it starts I can boot in to a working copy of windows 7. If I access or attach a external hard drive I get a blue screen that says "applehfs.dll" is the cause of the blue screen.
I did force boot the Mac os x install DVD and used the disk utility to first verify permissions and it came up with god knows how many errors, but won't let me repair permissions (it is grey out). So I proceed to do a disk volume check, it stops and says it is strongly recommended to backup as many files as possible and reformat the hard drive. I do have the equipment to recover data, however my concern is getting the hard drive replaced under warranty. Being a it support personnel I need my computer asap, it isn't my problem that the hard drive died so I am not going to just buy a new one, how does apple go about replacing NOT repairing the hard drive.
This is what I want, go to the apple store with my Macbook pro and my craftsman set of #000 screw drivers and take the hard drive out myself, hand the hard drive to the "genius" (which by the way are un qualified in my opinion to service my $1200 Macbook pro, as they scratched my first MacBook pro, and stripped the screws. Sorry Apple but you lost my trust). Have the genius hand me a replacement hard drive, I place that back into my MacBook pro and be on my merry way home to reinstall all of my programs and restore my data.
Is this a reasonable request and do you think apple will give me a hard time?
Thanks to all the help,
Jakthebomb

No, that isn't a reasonable request, and it's not going to happen that way. If you want Apple to warrant your new drive, Apple will insist on installing it. If you want to choose your new hard drive, you'll have to buy and install it at your own expense. Given your impatience, your prejudices, and your low opinion of Apple service, that's certainly what you should do. In addition to getting your preferred drive and installing it on your own schedule, you'll get a much longer warranty than Apple would give you on it, and you'll get to keep the old drive to recover data from it if necessary (Apple would keep it if they replaced it.) Installing a new drive yourself will have no effect on the Apple warranty covering the rest of the machine, and being an IT professional, you can probably buy a new hard drive for even less than we ordinary mortals pay for them nowadays.
So yes, Apple owes you a new drive, but if you can't accept the terms on which Apple will provide it, by all means just buy and install one yourself and get on with your life.

Macbook pro mid 2009 Hard Drive Replacing

Hello my name is Javier, I amcontacting you for a problem I have on a mid 2009 Macbook Pro 2.8GHz (MB986LL /A), This is a computer, which I paid more than 2200€ less than 2 years, the date of purchase was July 17, 2009.
Serial number: W8925AZT644
Registered to Maria del Carmen
I have problems and Apple does not want help ☹
You will see the problem withthe computer for which you are annoyed by the hard drive where smart verification failsand tells me I have to changethe hard disk.
I tried not to disturb and replace the hard drive myself, but this team and its driver gives problems with SATAdrives that do not bear the Apple firmware, which are described in your techsupport forums
https://discussions.apple.com/thread/2054387?start=0&tstart=0
https://discussions.apple.com/thread/2267098?start=75&tstart=0
As you can see there two threads with literally hundreds of pages on the incident.
The problem is that the same hard disk carrying thenotebook without the Apple firmware is worth € 52 but if Apple bought the costis 300 €, the same drive just with different firmware but it makes that thehard drive "NO APPLE "problem which is an abuse by Apple against itscustomers and a clear assault on the consumer.
What hard drive could buy?, do not want problems, Can anyone give their experience?
I've been watching this that is very similar to what has by default
HTS545050B9A300 500 GB (500,0 GB, Travelstar 5K500.B, MAESTRO) AABIJ5
Help me Please!!!!!!!!!!!!!!!!!!!!

Seagate is the must compatible hard drives with Macs
And you can see how to replace it in the link below
http://www.ifixit.com/Device/MacBook_Pro_17%22_Unibody
But keep in mind that you will void apple's warranty any you may damage your computer.

13" MacBook Pro (mid 2009) hard drive and memory upgrade

So I'm looking to upgrade my hard drive and memory for my 13" MacBook Pro. I'm still wondering just how easy it will be to recover my data, and put it back onto my new drive. I currently have everything backed up to an External drive using Time Machine. If I back it up, and then do the replacement, is it really as simple as it sounds to start it up, put in the Mac OS disk and then restore from a Time Machine backup? I have 150 Gb worth of data and would be ticked off if I can't get it back to my MacBook Pro. Any expertise out there? The actual installation looks easy, but it's the loading the new drive that has me concerned. When I install the new drive, is there anything else I need to do to prep it? And how do I do it if there is? Looking at a 500 gb or even 1 Tb Western Digital drive.

I would say get yourself an external enclosure. Put the hard drive that comes out of your MacBook pro into the enclosure. Put in the new hard drive. Boot up from the external hard drive, use disk utility to format the new drive. Use Carbon Copy Cloner to move everything as it is from old hard drive to new internal one. Re-boot to internal drive, you are done.
Carbon Copy Cloner is a freeware get it from download.com

MacBook Pro 13" 2010 hard drive

I get a folder with a "?" on boot up. I booted from the disk tools CD. Hard drive is listed, but no options are available - buttons are grayed out. I replaced the hard drive with the same results. What other options do I have to resolve this problem? OS - Snow Leopard, latest update.
Many thanks!

What do you mean you "Replaced" the hard drive.
If you put a new hard drive in the notebook and cloned or used Time Machine to copy all the data from the original hard drive, operating system, programs and personal data, to the new drive doing that just carried over everythinig that was wrong with the original hard drive and operating system.
You need to erase the new drive, re-install the operating system on it then copy over all your personal data from the old drive to the new. That also means you will need to re-install all the program you use on the new drive. Copying them from the old might also carry over some of the bad stuff that is on the old drive.

Macbook Pro - Late 2008 - Hard-drive Noise and Freezing

I bought my Macbook Pro in the latter part of 2008 and I haven't had any problems with it until a week ago when I started hearing what I believe to be the hard drive (the lower right portion just to the right of the track pad). During this time, I could still move the cursor around but I could not click on anything and all applications opened froze. This would occur every couple of hours or so, after which I would have to restart my Macbook Pro. Does anyone know what could be the problem and how I can go about solving this? Thanks!!!

Lately there have been quite a few debates on the hard replacement issues with MBP's and from what I have seen they mostly are around the power consumption of the drives being not compatible..
So it's been many days now I'm recommending people this drive :
http://www.amazon.com/Western-Digital-2-5-Inch-Internal-WD5000BEKT/dp/B003TOE4PQ
It's one of the least power hungry drives on the market and is one of the highest performers as well.
It's 7200 rpm and a whopping 500GB for 70-80 dollars is quite interesting .
if you buy the drive and hesitate to replace don't worry it's a 5 minute super easy task and you will find plenty of help if you report back here
I hope I could be of help

MacBook Pro (mid 2010), won't turn on if back cover is on?

If I try and boot my Macbook Pro with the back cover on, I get a flashing question mark folder.
If I remove the back cover and boot, everything is fine, bots up perfectly...
Could this be some kind of short, I'm totally confused...
Any ideas...?

Back cover with magnets?
http://support.apple.com/kb/TS2917

I've lost my macbook pro mid 2010 optical drive ribbon cable. What do I do now?

I had kept it somewhere as my SSD bracket was about to arrive. But I lost it as I was moving out of my apartment

The cables are not that expensive at an Apple store and it will be replaced for you as well. Consider that option.
Ciao.

Hi everyone I have a macbook pro mid 2010 17'' 2.66 i7 looking to put a new hard drive in it something like a 250 gb , orig drive 500 gb 5400 toshiba but i don;t really need that much space so i would like some input, type,speed,brand,compatibly,noise

I have a macbook pro mid 2010 17'' 2.66 i7 looking to put a new hard drive in it something like a 250 gb , orig drive 500 gb 5400 toshiba but i don;t really need that much space so i would like some input, type,speed,brand,compatibly,noise Thank You!!

There's no reason to install a smaller hard drive. In some cases, it may decrease performance.
Your MacBook Pro comes with a 5400 rpm hard drive, so what you can do is to install a smaller, 7200 rpm hard drive, so you will get a better performance. Any 2'5" SATA hard drive will work, but you can have a look at OWC for hard drives > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
HGST and Seagate hard drives have a good reputation, so you can purchase one of them

I was using my MacBook Pro Mid-2010 and then the screen went blank, I did a hard restart and went to restart again and it won't startup. The white light comes on and then the computer kinda "clicks" off!

I was using my MacBook Pro Mid-2010 and then the screen went blank, I did a hard restart and went to restart again and it won't startup. The white light comes on and then the computer kinda "clicks" off!

Execute the procedures in this support article:
http://support.apple.com/kb/TS1367?viewlocale=en_US
Ciao.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?

Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Apple Unibody 13.3" MacBook Pro (Mid-2010): 4GB vs. 8GB DDR3 1066MHz Memory (RAM).

Apple Unibody 13.3" MacBook Pro (Mid-2010): 4GB vs. 8GB DDR3 1066MHz Memory (RAM).
1. About my Mac.
     Processor: Intel® Core 2 Duo (2.66GHz)
     Memory (RAM): 4.00GB DDR3 1066MHz (2 x 2.00GB)
     Hard Drive: 320GB 5400RPM (Apple Stock HD)
     Graphics: NVIDIA GeForce 320M (256MB)
     Operating System: Mac OS X Lion (10.7.1)
2. My concerns/questions
     For quite some time now, I've been planning to upgrade the memory (RAM) of my MacBook Pro from 4.00GB (Apple Stock) to 8.00GB. In terms of "FASTER BOOT TIMES, IMPROVED RESPONSIVENESS (OPENING and CLOSING PROGRAMS, FILES & ETC.), SMOOTHER GRAPHICS, ABILITY TO OPEN MORE PROGRAMS SIMULTANEOUSLY AND OVERALL IMPROVEMENT IN PERFORMANCE", does it really make a BIG difference?
     If ever I am going to pursue this upgrade, should I let Apple do the upgrade or buy the parts and do it myself?
     If I am going to buy the parts and install it myself, what brand do you recommend? Crucial, Kingston, OWC & etc.?
     Why does Apple charge so much for memory (RAM) upgrades? Is the memory module they are using any special compared to the ones we can find in Amazon (Crucial, Kingston, OWC & etc.)?
Thanks for helping me out with my concerns.

I recommend OWC RAM because it's reasonably priced and OWC's support is great if you ever need it. I recommend installing the RAM yourself because it's dead simple. There is no good reason for anyone ever to pay Apple's prices for RAM.
I don't think you will see faster boot times with more RAM, but that shouldn't be a concern, because there's seldom any need to shut down or restart a MBP. Just put it to sleep when you aren't using it, unless you won't use it again for more than two or three days. Opening and closing programs won't benefit significantly from more RAM either, but when running multiple large programs at once, you will see a significant improvement in their performance. It's well worth the small investment ($65) to upgrade from 4GB to 8GB.
http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3

MacBook Pro Mid 2010 Battery Capacity

I've read a few threads about this, mostly about battery capacity rapidly dropping after an install of ML. I installed ML when it first came out, and just noticed the drastic decrease in battery life about 3 weeks ago. My capacity could have potentially been dropping since I installed ML (and I just now noticed it), or it may have just started a couple weeks ago when I noticed. I'm not sure.
Either way, my MacBook Pro (Mid 2010) now has a battery life of less than an hour, even with extremely light processor load. I contacted Apple about this, and the tech said that the battery was rated for 1000 cycles. I'm currently at 220, and my battery capacity is a pathetic 30%. He said that since I wasn't under warranty, there was nothing they could do besides replace the battery - which I really want to avoid since I'm a broke college student.
Is there anything I can do here? I understand that I'm not under warranty anymore, and this wouldn't be a problem if my battery was degrading normally. However, getting 1/5th of the recommended battery life is pretty sad. I've read that doing a clean install of Mountain Lion/Lion might help. Is there a way I can do this without having to back up all my files? I don't have an external hard drive or anything.
It seems this is a common topic in these forums. Any help or links to solutions would be great. If this is answered in a similar topic, I'll gladly delete.
Here is the system info on my battery, incase that might help:
Battery Information:
Model Information:
Serial Number:          9G030040MD3MA
Manufacturer:          DP
Device Name:          bq20z451
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          201
Hardware Revision:          2
Cell Revision:          158
Charge Information:
Charge Remaining (mAh):          1453
Fully Charged:          No
Charging:          Yes
Full Charge Capacity (mAh):          1939
Health Information:
Cycle Count:          220
Condition:          Service Battery
Battery Installed:          Yes
Amperage (mA):          1507
Voltage (mV):          12214
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          0
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          15
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
PrioritizeNetworkReachabilityOverSleep:          0
Battery Power:
System Sleep Timer (Minutes):          15
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          10
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0100
Wattage (W):          60
Revision:          0x0000
Family:          0x0085
Serial Number:          0x00cb7bc3
Charging:          Yes
Thanks in advance

Condition:
     Service Battery
You need a new battery.

MacBook Pro Mid-2010 Intermittent Shut-Down and Fuzzy Screen

Hi,
My MacBook Pro Mid-2010 has been having some problems recently. Hope someone will be able to help me with this. Below are the symptoms that has been showing.
Symptoms:
1. Intermittent Shutdown
2. Screen going fuzzy (when I give it a slight tap it will be fine but everything just hangs)
3. 3 beep sound
4. Can't start up (The sleep light will just stay on but nothing appears. I have to force shutdown and try starting it again.)
I have recently done a clean install of Yosemite but the problem is still occuring.
I also took it down to Singapore Apple Service Centre to try to get the problem fixed. But the initial tests shows that all the components in the Mac is working fine. I will need to pay for a full test as my Mac is out of warranty hence I did not send it in.
Below is a copy of the recent log after it shut down by itself.
Appreciate if someone can help me with this!
Thank you!
Regards,
Kai Yuan
Anonymous UUID:       730F95C2-DB71-659C-6654-559BD5396C64
Sun Nov 16 20:38:03 2014
*** Panic Report ***
panic(cpu 2 caller 0xffffff801c01e80a): Kernel trap at 0xffffff801c35a806, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x00000001069a1000, CR3: 0x000000001e2fc001, CR4: 0x00000000000226e0
RAX: 0xd7f3000000000000, RBX: 0xffffff802c1370f0, RCX: 0x0000000025000000, RDX: 0x0000000000000000
RSP: 0xffffff80b28cbd00, RBP: 0xffffff80b28cbd20, RSI: 0x0000000000000002, RDI: 0xffffff802c122528
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0x0000000000002000, R11: 0x0000000000000022
R12: 0xffffff802c1370f0, R13: 0x0000000000000000, R14: 0xffffff80b28cbe18, R15: 0xffffff802c122528
RFL: 0x0000000000010286, RIP: 0xffffff801c35a806, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x00000001069a1000, Error code: 0x0000000000000000, Fault CPU: 0x2
mp = 0xffffff80278dbc00, phys = 0x1e649c00, prev (0x7: 0x1bd13000-0x1be00000)
vp = 0xffffff80278dbc00, phys = 0x11b8d40f0, prev (0xb: 0xffec4000-0xffee8000)
0xffffff80278da000: aAAAAGsAAABwAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABAICA gAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAACAgB4fCQcgAACACAAAACETGg2GkqKTgoIaPgACAgACKggAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACAgEAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAG1hcCBhdXRvX2hvbQjXQCeA////AAACAP8PAAAAAAA h/////z8AAAAA0BwoQNutKWNUYjgAno0ngP///wCyjSfQsTie4NxlHID///8A360pgP///yDdrSmA/// /QN2tKYD///9QqI0nCABQBAAACAAABAAAAAIAAAEAAC0VAAAAYXV0b2ZzAAAvbmV0bWFwIC1ob3PAzAA A4A4O7pDu3g5lgAAgIASwOYAPIAAB/P83YNANAAAA
0xffffff80278db000: eAAAAIEAAACNAAAAAAAAAAAAAAAAAAAAAACAgB4fCQcgAACACAAAACETGgmGkqLTgoMZP0QBMwACKQQ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AADAwAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAwMAfH4mHLQAGwAgAAAAhExoNidMiE4aPKn9oAuoAAhoAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAIjyRyeA////AAACAP8PAAAAAAAh/////z8AAAAAUa0 nIN2tKYD///+4V2E4AKiNJ4D///8AvI0nMAlmHCDcZRyA////oEWYJ9CylS9Qso0nABAQBAAQEADoMRw nZGV2Zi9kZXb/DwAAACLnt//////4LgoAAAAAIT8AAACA4pEnsESYJynJ1hsgU28cGkkAABjeZhxg22U c8IBFKBBxEyxgS5gnYLyNJwDQgAQAAV2AABAAAAAAEAAAdkIH///LBv8FywYBcHcABAAAAREAAABoZnM AzAAADA7uDuDu7m7jAAAAMMALDswMAHDgDg5u7u7uPu7+DgAGIAAIAgFsDjgDCAAT/wMODWACaBZsTjA HIAAIAgFgKj+bAz4AAgD4P4CDBwH+vQAA
0xffffff80278dc000: WQAAAF0AAABkAAAAAAAAAAAAAAAAAAAAACAgIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAwgIAaHxoHLQAGQAoRAAAAABIDABAAAIAAFn0AAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAHh8JByAAAIAAAAAAAAAiAS9kZXYvZGlzazEAAAjInieA////AAAAAgABAAAAAEA AAwAAACHdCAAAAAAhMEyYJwMAAADA4pEnQMaNJwAQAAAAAAIA/w8AAAAAACH/////wIx3JwIAAAAAAAA A4ADmDk7uBM4AAAzsAIIQAArYeiP/Ax4AAvwPOFCCCRAgAAgCAQAOAAAA
Backtrace (CPU 2), Frame : Return Address
0xffffff80abe1de10 : 0xffffff801bf3a811
0xffffff80abe1de90 : 0xffffff801c01e80a
0xffffff80abe1e050 : 0xffffff801c03a443
0xffffff80abe1e070 : 0xffffff801c35a806
0xffffff80b28cbd20 : 0xffffff801c142c3b
0xffffff80b28cbdd0 : 0xffffff801c357da7
0xffffff80b28cbeb0 : 0xffffff801c15c86b
0xffffff80b28cbdd0 : 0xffffff801c146ef4
0xffffff80b28cbf40 : 0xffffff801c1510f7
0xffffff80b28cbf50 : 0xffffff801c44dcb2
0xffffff80b28cbfb0 : 0xffffff801c03ac46
BSD process name corresponding to current thread: launchd
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:     0x000000001bc00000
Kernel text base: 0xffffff801be00000
__HIB text base: 0xffffff801bd00000
System model name: MacBookPro6,2 Mac-F22586C8)
System uptime in nanoseconds: 694617714744
last loaded kext at 41929989267: com.apple.driver.AudioAUUC 1.70 (addr 0xffffff7f9e43c000, size 32768)
last unloaded kext at 112897414739: com.apple.driver.AppleUSBUHCI 656.4.1 (addr 0xffffff7f9d344000, size 65536)
loaded kexts:
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.37
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 266.5
com.apple.driver.AppleHDA 266.5
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleIntelHDGraphics 10.0.0
com.apple.GeForceTesla 10.0.0
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMuxControl 3.7.21
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIntelHDGraphicsFB 10.0.0
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleUSBCardReader 3.5.0
com.apple.driver.AppleIRController 327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.7.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 266.5
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0
com.apple.nvidia.classic.NVDAResmanTesla 10.0.0
com.apple.driver.AppleBacklightExpert 1.1.0 >AppleGraphicsControl 3.7.21
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOSurface 97
com.apple.driver.AppleHDAController 266.5
com.apple.iokit.IOHDAFamily 266.5
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOBluetoothFamily 4.3.0f10
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0
com.apple.iokit.IOUSBMassStorageClass 3.7.0
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.CoreStorage 471
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.iokit.IO80211Family 700.52
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.Libm 1
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.0f10 14890, 3 services, 19 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS545050B9SA02, 500.11 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: IR Receiver
USB Device: Built-in iSight
Thunderbolt Bus:

I just had the same problem! Just installed Mavericks a couple of days ago but everything was running perfectly till just a couple of minutes ago watching netflix and working on Dreamweaver my macbook just shutdown. I had to Turn it back on and in the first try it shutdown immediatelly again, then i tried for second time and as soon as i got back into my account a bunch of programs start sending erros as my clock was set to a different date. My battery seems to be fine, i even check the report in the system preferences, it had 50% of battery and was plugged in so i am guessing that is not the problem.
Here the report:
Charge Information:
Charge Remaining (mAh):          3356
Fully Charged:          No
Charging:          Yes
Full Charge Capacity (mAh):          6626
Health Information:
Cycle Count:          367
Condition:          Normal
I had to have my motherboard replaced last year as my macbook its a 15 inch Mid 2010 so i took it to Mac Store.. they didnt charge me for anything as it is a problem that Apple acknowledge the problem was in their side. I am just hoping i dont have to deal with this again.

BootCamp 5.0 error on 13" MacBook Pro Mid-2010: "Installation Error. Boot Camp x64 is unsupported on this computer model"

Installing Boot Camp 5.0.5033 (downloadable at http://support.apple.com/kb/DL1638) on Windows 8 x64 on 13” MacBook Pro Mid-2010 using BootCamp\setup.exe, I get the following message: “Installation Error. Boot Camp x64 is unsupported on this computer model”.
According to http://support.apple.com/kb/HT5634, Windows 8 x64 is not supported by Boot Camp 5 on 13” MacBook Pro Mid-2010 .
Previous version, Boot Camp 4.0, causes bluescreens on Windows 8 (https://discussions.apple.com/message/20131524#20131524).
Fortunately, it might be still possible to employ updated Boot Camp by launching “msiexec /i BootCamp.msi” from BootCamp\Drivers\Apple folder using administrative command prompt (http://technet.microsoft.com/en-us/library/cc947813%28v=WS.10%29.aspx).
However, new Boot Camp 5.0.5033 does not contain all the drivers for 13” MacBook Pro Mid-2010. E.g. driver for NVIDIA nForce System Management Controller (labeled Other devices/Coprocessor in Control Panel) and NVIDIA nForce PCI Systems Management (labeled Other devices/SM Bus Controller in Control Panel) must be obtained at Drivers\NVidia\NVidiaChipset64 in older Boot Camp 4.0 (downloadable at http://support.apple.com/kb/DL1634)
According to Microsoft (http://windows.microsoft.com/en-US/windows-8/system-requirements), the MacBook Pro config (Intel Core 2 Duo P8600 2.4GHz, 4GB RAM) exceeds Windows 8 x64 hardware requirements. Windows Experience Index for this laptop is approx. 5.1 (http://windows.microsoft.com/en-US/windows-8/what-windows-experience-index).
Does anybody know, is there any technical reason why Windows 8 x64 is not supported by Boot Camp 5 on 13” MBP Mid-2010?
Is there a specific hardware/firmware deficiency in this MacBook model, incompatible with Win8? Maybe NVIDIA refused to provide Win8-compatible drivers for its chipset components (GeForce 320M graphics card though is still supported by latest notebook drivers available at www.geforce.com)?

Thanks for the detailed explanation! If MacBook supports AHCI/SATA only in native “UEFI mode”, while reverting back to PATA/IDE in legacy “BIOS mode”, then it could make perfect sense to use UEFI to make sure that technology like Native Command Queuing (NCQ) is employed, as it may give noticeable performance improvements for certain operations: www.happysysadm.com/2012/12/intel-g530-nas-performance-part-3.html. I wonder how do you get Windows 8 x64 with EFI bootloader installed on MacBook?
Simply choosing EFI Boot (“Some EFI platforms support both UEFI and BIOS firmware. On some of those systems, it is not always clear if the default DVD boot option is an EFI or BIOS boot option. On these systems, using the EFI shell command may be required. If you do not specifically start Windows Setup by using the EFI boot entry, the default firmware boot entry for BIOS may be used. If Windows Setup starts in BIOS mode on a combined EFI/BIOS system, the ESP and MSR partitions are not created.”) from Win8 x64 DVD when installing on blank HDD would yield “The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed" message. Also, if the hard drive was not in SATA mode during Windows installation, registry tweaking may be required before switching from PATA to SATA. Do you do registry tweaking and EFI bootloader configuration manually after a copy of Windows was installed in its dedicated partition in a regular way?

Macbook Pro mid 2010 hard drive beep, click, freeze BACK after Lion?

Similar Messages

Maybe you are looking for