MacBook Pro (Mid 2010) will only boot in safe mode.

I've been unable to boot my MacBook Pro normally. It will boot in safe mode, and, until today, I was able to get a normal startup after resetting both PRAM and SMC. Running "Repair Disk" on the startup disk did not reveal any problems. I have also done a recovery boot to reinstall OS (10.9.1), which did not help either, though I did not wipe the hard disc first (I did back it up).
Had to take it to Apple back in January when the screen started acting funny, i.e. getting static-y and going blank for seconds at a time but then coming back. Their tests showed that there were no hardware problems, and the screen issue was eventually resolved by doing a PRAM reset. About 14 months ago, I had the logic board replaced.
Also, I'm not sure if this is related, but when I have been able to boot normally, if I quit Google Chrome, the machine will freeze completely.
Ran EtreCheck; here's the info from that:
Hardware Information:
          MacBook Pro (15-inch, Mid 2010)
          MacBook Pro - model: MacBookPro6,2
          1 2.66 GHz Intel Core i7 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics - VRAM: 288 MB
          NVIDIA GeForce GT 330M - VRAM: 512 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 0:50:36
Disk Information:
          ST9500420ASG disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 499.25 GB (146.37 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-898
USB Information:
          Apple Inc. Built-in iSight
          Apple Computer, Inc. IR Receiver
          Apple Internal Memory Card Reader
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Configuration files:
          /etc/hosts - Count: 15
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.adobe.SwitchBoard.plist 3rd-Party support link
          [System] com.google.keystone.daemon.plist 3rd-Party support link
          [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
          [invalid] com.oracle.java.Helper-Tool.plist
Launch Agents:
          [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [System] com.adobe.CS5ServiceManager.plist 3rd-Party support link
          [System] com.divx.dms.agent.plist 3rd-Party support link
          [System] com.divx.update.agent.plist 3rd-Party support link
          [System] com.google.keystone.agent.plist 3rd-Party support link
          [invalid] com.oracle.java.Java-Updater.plist
          [System] com.wacom.wacomtablet.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
          [not loaded] com.mlbam.nexdef.core.NexdefLoader.plist 3rd-Party support link
          [not loaded] com.mlbam.nexdef.plist 3rd-Party support link
          [not loaded] com.spotify.webhelper.plist 3rd-Party support link
User Login Items:
          XPSLauncher
Internet Plug-ins:
          AdobePDFViewerNPAPI: Version: 10.1.9 3rd-Party support link
          Flash Player: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
          McGraw Hill ChemDraw: Version: 12.0.3 3rd-Party support link
          DivX Web Player: Version: 3.0 - SDK 10.5 3rd-Party support link
          AdobePDFViewer: Version: 10.1.9 3rd-Party support link
          WacomNetscape: Version: 2.1.0-1 - SDK 10.8 3rd-Party support link
          googletalkbrowserplugin: Version: 5.1.4.17398 3rd-Party support link
          iPhotoPhotocast: Version: 7.0
          DirectorShockwave: Version: 11.6.5r635 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          FlashPlayer-10.6: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
          npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 3rd-Party support link
          Silverlight: Version: 5.1.20125.0 - SDK 10.6 3rd-Party support link
          OVSHelper: Version: 1.1 3rd-Party support link
          Google Earth Web Plug-in: Version: 6.1 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          Flip4Mac WMV Plugin: Version: 2.4.4.2 3rd-Party support link
          o1dbrowserplugin: Version: 5.1.4.17398 3rd-Party support link
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
          WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 3rd-Party support link
          JavaAppletPlugin: Version: 14.8.0 - SDK 10.9 Outdated! Update
          AmazonMP3DownloaderPlugin101736: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 3rd-Party support link
Safari Extensions:
          ClickToFlash: Version: 2.7.5
          ClickToPlugin: Version: 2.7.5
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          WebEx64: Version: 1.0 - SDK 10.6 3rd-Party support link
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
          Flip4Mac WMV 3rd-Party support link
          Growl 3rd-Party support link
          Perian 3rd-Party support link
          WacomTablet 3rd-Party support link
Old Applications:
          None
Time Machine:
          Skip System Files: NO
          Mobile backups: OFF
          Auto backup: NO - Auto backup turned off
          Volumes being backed up:
                    Macintosh HD: Disk size: 464.96 GB Disk used: 328.64 GB
          Destinations:
                    G-DRIVE [Local] (Last used)
                    Total size: 465.64 GB
                    Total number of backups: 1
                    Oldest backup: 2013-07-27 20:13:09 +0000
                    Last backup: 2013-07-27 20:13:09 +0000
                    Size of backup disk: Too small
                              Backup size 465.64 GB < (Disk used 328.64 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               1%          hidd
               1%          EtreCheck
               1%          WindowServer
               0%          mds
               0%          Google Chrome
Top Processes by Memory:
          180 MB          Google Chrome
          168 MB          com.apple.IconServicesAgent
          111 MB          Finder
          77 MB          Google Chrome Helper
          74 MB          Dock
Virtual Memory Information:
          850 MB          Free RAM
          1.80 GB          Active RAM
          839 MB          Inactive RAM
          432 MB          Wired RAM
          584 MB          Page-ins
          0 B          Page-outs
Any ideas are much appreciated!

First try doing a Software Update.
Then restart and see if that works.
If not then I would update Java.
Restart and see if that works.
If not then delete the following plist items.
[invalid] com.oracle.java.Helper-Tool.plist
[invalid] com.oracle.java.Java-Updater.plist
Should find these in:
/Macintosh HD/Library/LaunchAgents
/Macintosh HD/Library/LaunchDaemons
Now restart & see if that works.
If that doesn't work try deleting everything in:
/Macintosh HD/Library/StartupItems
Hope this helps.

Similar Messages

My macbook pro will only boot in safe mode

Hey,
I have a macbook pro 15-inch, Early 2011 running osx 10.9.4. I have a SSD hard drive that i installed myself a year ago and hasn't shown any defects. Its a 120 gb OCZ-AGILITY3.
My problem:
My macbook will only boot in safe mode nowadays. I have done a complete erasion of my hard drive and installed osx mavericks twice already. After the installation the computer will safely go to the desktop. But if i then do a reboot it won't get further than after the first apple logo, sometime the turning wheel will pop up, before turning off and trying again. i have tried resetting PRAM, I have tried resetting SMC, i have tried avoiding SMC (with big fan rate), but all with no success.
I have done a complete hardware test (the longer one) and it showed "no troubles found".
My guess is that the problem is with the battery. My computer won't run anymore without the adapter, when i pull the adapter out it either stays on for a while before just turning off. Without having it plugged in it won't start. Is it possible that during normal start up there is some kind of communication with the battery that can cause this?
I ran a diagnostic shown in this thread (Will only boot in safe mode) and included it in this post.
Hope someone can help me out.
Thanks,
Bram
Start time: 17:07:42 08/25/14
Model Identifier: MacBookPro8,2
System Version: OS X 10.9.4 (13E28)
Kernel Version: Darwin 13.3.0
Boot Mode: Safe
Time since boot: 10 minutes
Battery
Condition: Replace Now
Diagnostic reports
2014-08-25 UserEventAgent crash
Log
Aug 26 00:41:52 Previous Shutdown Cause: -128
Aug 25 16:23:38 smb1_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
Aug 25 16:24:05 process rpcsvchost[94] thread 917 caught burning CPU! It used more than 50% CPU (Actual recent usage: 99%) over 180 seconds. thread lifetime cpu usage 100.014147 seconds, (82.533432 user, 17.480715 system) ledger info: balance: 90006319931 credit: 100003230498 debit: 9996910567 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 90079246240
Aug 25 16:25:50 smb1_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
Aug 25 16:58:05 jnl: b(1, 3): replay_journal: from: 9340928 to: 9773056 (joffset 0x37a000)
Aug 25 16:58:05 jnl: b(1, 3): examining extra transactions starting @ 9773056 / 0x952000
Aug 25 16:58:05 jnl: b(1, 3): txn starting at 9773056 (9773056) @ index 80 bnum 2696544 (8192) with disk cksum != blhdr cksum (0x93b69228 0xc647562)
Aug 25 16:58:05 jnl: 0x662b0000 0x451b0000 0x2a0001ff 0x40000000 0xd7330300 0x46001d00 0x6c006f00 0x65006400
Aug 25 16:58:05 jnl: b(1, 3): restarting journal replay (9340928 - 9773056)!
Aug 25 16:58:05 jnl: b(1, 3): replay_journal: from: 9340928 to: 9773056 (joffset 0x37a000)
Aug 25 16:58:05 jnl: b(1, 3): journal replay done.
Aug 25 16:58:06 Previous Shutdown Cause: -128
Aug 25 16:59:26 smb1_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
Aug 25 16:59:59 smb1_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
Activity
CPU: user 17%, system 4%
CPU per process: WindowServer (UID 0) is using 30.5 %
launchd
/System/Library/LaunchAgents/com.apple.AirPortBaseStationAgent.plist
- com.apple.AirPortBaseStationAgent
Contents of /System/Library/LaunchAgents/com.apple.AirPortBaseStationAgent.plist (XML document text)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.AirPortBaseStationAgent</string>
<key>EnableTransactions</key>
<true/>
<key>LowPriorityIO</key>
<true/>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>POSIXSpawnType</key>
<string>Background</string>
<key>LaunchEvents</key>
<dict>
<key>com.apple.distnoted.matching</key>
<dict>
<key>com.apple.airport.agent.prefschanged</key>
<dict>
<key>Name</key>
<string>com.apple.airport.agent</string>
</dict>
</dict>
<key>com.apple.bonjour.events</key>
...and 21 more line(s)
Spotlight: Indexing and searching disabled
Font issues: 11
Wi-Fi
link auth: wpa-psk
Restricted files: 1
Elapsed time (s): 278

Actually it sometimes gets a little further, the display will dim and the pointer will appear and then whoop it will turn off. if i do a verbose start up, it will finish all the steps, the white screen will appear and dim and then it will turn off.

How can I transfer files from a 27" iMac which will only boot in safe mode?

My late 2009 27" imac is having issues and will only boot in safe mode. I have tried to transfer files to a new Imac using migration assistant but it wont let me. If I try booting the old Imac normally I just get a grey screen, I believe it is the video card failed and am waiting for a fix, but I would like to transfer files before the fix in case something goes wrong and I lose everything.
Any help would be great

Hello Myles, likely it is a Hardware problem.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Qosmio X305 will only boot in safe mode or when the graphics card disabled

Hi All
I am having a very concerning issue with my laptop (Toshiba Qosmio X305). It will only boot in safe mode or if I disable the graphics card.
Awhile back I upgraded the drivers for the nVidia 9800M GTX from the nVidia website, it worked fine for awhile, but then it started crashing randomly by giving me a full screen of random color then switching off. I fixed this by rolling back to the previous version of the drivers (the drivers that came with the laptop software).
After that it working perfectly for months but yesterday my machine started crashing and I could not get it to boot correctly.
I have completely deleted (not just a quick format) both the hard drives that came internally in the laptop and I have installed a clean version (the out of the box option) of the x64 Vista that came with the laptop from the recovery disks I created. After I did the install, it boots fine as only the standard VGA device is used, as soon as I installed the driver off the drivers and applications disk it would not boot correctly:
Just after the status bar comes up and it is about to show the windows logo, just before login, I get a black screen. I can hear that it is booting fine and I can even log in to windows and by memory make things run, but I can't see anything. I then got the latest drivers, again from the nVidia website and they are not helping at all.
My system is as follows (nothing has been added, its is just how I got it):
Vista Ultimate x64
4.00 GB RAM
Intel Core 2 Quad
Like I said previously it is a clean install of the operating system, I have not added any programs, except for installing and then updating the display drivers.
Any help would be much appreciated!

Hi buddy,
It seems that this is a typical example, that only pretested display drivers from Toshiba should be used. Why?
The nVidia drivers are not pretested and they dont have an overheat protection. So for me it sounds like that the nVidia driver has destroyed your graphic card. That means no driver will help you and reinstallation of the whole system too.
I think the only option is replacing the graphic card. Therefore you should contact an authorized service provider in your country. Here you can search:
http://www.csd.toshiba.com
Explain the whole story and then you will see, what the technicians say. If your notebook is under warranty, hopefully this will be covered too. Normally other display drivers you have to install on your own risk
Good luck! :)

MacBook Pro mid 2010 - iMac late 2012 in target mode?

Can I connect a MacBook Pro mid 2010 with Mini Display Port with a late 1012 iMac in target mode? Thanks.

A 2010 MBP does not support Thunderbolt technology so that is not an avenue for you. A Fire wire with one of these adapters should enable you to connect the two devices:
store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapter
Ciao.

Windows 7 will only boot in safe mode after Bootcamp Driver Installation

Help! I recently installed Windows 7 onto my MacBook Pro with OS X 10.6.4. Everything runs smoothly until I restart the machine following the installation of the Bootcamp Drivers. Upon restart, I am told that Windows "was not able to shut down successfully." I can restart in safe mode but cannot seem to fix the problem. I assume it is related to one of the Bootcamp drivers but which one? Has anyone had this problem? Do I need to install the Bootcamp drivers in order to run windows successfully? Thanks so much!

BEFORE you installed anything off OS X DVD, you did have Windows running, right?
So it was crippled but somewhat functional. And it is possible to create a standard user account, a 2nd admin account. Just as one backup, I understand that doesn't really help.
Same with backing up Windows 7 to an external drive, making a system restore image.
And you can copy the Apple drivers to a folder in Windows and use Troubleshoot Compatibility Mode and install individually (they aren't one program or package, they are in
Apple\Drivers\ for one and people using 64-bit have to use that to run Bootcamp64.msi using Compatibility Mode.
When you started and titled "will boot in safe mode" that sounded like you could boot and login.
Using external wired keyboard and mouse is what some people have had to do until they got proper drivers.
Would be nice if:
Windows had more drivers and Apple would ship a set to be included in Windows 7 SP1; drivers worked! And could be downloaded and installed directly into Windows, and no need for old 3.0 and then 3.1 but go directly to latest (and new Macs do have improved 3.0 drivers, which are on 10.6.4 DVDs).

Intel Mini will only boot into safe mode - hangs on ANY Mac OS volume

I have an Intel Mac Mini... the core2duo 1.83GHz or whatever.
I acquired it from it's previous owner, as it was "broken".
He could not get it to run an install disc.
It will not boot any of the Mac OS install media (DVD or CD - 10.4, 10.5, 10.6).
It will not boot/install a Linux disc (I haven't tried, but that's what I was told).
It WILL boot/install Windows !?!?
So... anyway, I removed the HDD, and installed OS 10.6 Leopard on it (FW Target mode installs kept failing at the end - regular retail DVD). I then reinstalled the HDD back into the machine.
The system keeps hanging at the same point it would when trying to boot an install DVD - after the screen turns blue, it goes back to the gray screen, then immediately freezes.
However, I eventually discovered that it WILL boot into safe mode !
Everyone kept saying it's the logic board failure, but if it boots into safe mode, can that be true ? It doesn't seem to me that it would be hardware based in that case - unless it's just a specific component, like the Airport module or something.
The last line displayed in Verbose mode when it hangs is:
"athset_txchainmask[5124] sc->sc.config.txchainmask 5 mask 5"
It also says something about the Airport just before that.
I tried removing the Airport module and it still hangs.
I also tried different RAM, with the same results.
I ran the 10.6.2 combo update in Safe Mode. It still hangs. Haven't tried 10.6.3 yet, though I do have it downloaded and ready to install.
This thing is driving me crazy. Please tell me there's a fix, OTHER than replacing the logic board ?!?! It just doesn't seem like it should be so complicated considering that it runs in safe mode.
It's rare I can't figure out a Mac problem - please help !
Message was edited by: maxtechsystems

Very strange, and getting stranger !
Ok... so, from safe boot mode, I installed Windows XP Pro using the boot camp assistant.
Everything installed perfectly. I started up from Windows, and put in the Mac Mini recovery disc, in order to load the drivers. The Boot Camp software started with Auto Run, and I clicked through to install everything. The drivers start loading...Windows reacts positively, with the system tray announcing "new hardware installed" every 30 seconds or so. Airport/WiFi IS working (in Windows), as it detected my router/network...this is where it gets F'ed up - when the installer gets through with the drivers, and installs the boot camp software for Windows - the system reboots, goes through the usual Windows startup...the desktop background appears, but no icons or start menu - then it reboots again...same thing, again, over and over in a loop.
Went back into OS X (safe boot mode). Installed reEFIt (a bootloader utility), to see if maybe I can bypass the Mac OS/Boot Camp bootloader. No luck. Install worked, but still had the same issues.
For the heck of it, I try installing Linux Mint 8. The live CD starts up OK, but only as far as the boot menu. I tried the installer first - after the splash screen, it hangs on a plain gray screen (w/o the normal linux installer language selection menu - just solid grey).
I tried running the live CD w/o the installer - the actual OS. Same thing - after the splash screen, it hangs, only it's a black screen this time. If I use verbose mode, it still seems to hang on the WiFi card.
Here's the strangest thing yet - Ok, remember, it wouldn't boot normally into ANY Mac OS volume - including the installer DVDs - only in safe boot mode...
So, I try the "hackintosh" IPC osX86 10.5.6 DVD - it boots into the installer with NO problem, WITHOUT safe boot mode ! I tried installing it unsuccessfully. I forget now which options I choose, if any, though I may try it again later and pretend it's just a non-apple PC with the same specs as the Mini (or try just the "base system", and the bootloader - then run the official Apple updates)
This last thing really makes me think it has something to do with the EFI/bios - however, I've only been able to find info on how to update it, not replace or restore it - and it's only from a working install, not forced from a flash drive or CD (plus when I do try the installer from safe boot mode, it says it's current and unneeded).
I still haven't changed the hard drive. After almost successfully installing Windows, I made the assumption the -hardware- was OK, and reassembled everything.
Currently, I'm trying a direct installation of Windows XP Pro SP2 with which I'll try installing the drivers WITHOUT the boot camp software, to see if the WiFi (Airport card) and everything else is indeed working OK (remember too that the system passed ALL the ASD 3S116 tests).
So anyway, that's the current status. Any new ideas anyone ?
Thanks.
Message was edited by: maxtechsystems

24" iMac will only boot in safe mode

Here is the short version:
I have a 24" iMac Core 2 2.16 GHZ with Lion installed (has been for a long time). It will only boot successfully in safe mode. The AHT Extended tests do not report any problems. I have reset PRAM and SMC. Nothing helps. Normal boot process will get to the point where it switches from the Apple logo with spinning wheel to where it would normally switch the OSX GUI and login screen. Instead the screen is all white or gray. The exact same problem happens if I try to boot from an OSX Install DVD or USB and also my DiskWarrior DVD. Since safe mode works, my guess is that the problem is with the video card and the normal color depth that the Mac boots to. In Safe Mode it is in reduced colors.
Since safe mode works, I have all of my data backed up to an external drive. If I could boot from an install disk, I would have already wiped the disk and done a new install, but I cannot do this! I am assuming this is a hardware problem and given the age of this iMac I am out of luck. I ordered a new system last night, but if it is possible to get this one working again, I would like to be able to give it to a relative who could use it. So if anyone has any ideas, it would be appreciated.
Just slightly longer version:
Been using this system since 2007. Used to use it for work, now it is the home media hub where we sync our iOS devices. It has had Lion installed for probably a year now and has always worked great. A few weeks ago, it started locking up whenever my son was playing Minecraft. I would have to power off the system to get it back. I assumed it was a Java problem. I tried fixing disk permissions etc. but nothing solved it. Anyway, last week I was downloading App updates in iTunes when the system locked up again. The mouse would move around but I could not Force Quit anything or really do anything. So I had to power off the system. That is when the boot problems started. Since that happened, the system has not come back with a normal boot.
Thanks for any ideas/help. If someone thinks this is fixable, I can bring it to my local Apple service dealer. I do not want to pay them $100 just to have them tell me it cannot be fixed or needs a new logic board or something like that which would not be worth buying.
Mark

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
The commands may line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it. Copy the selected text to the Clipboard (command-C). Then click anywhere in the Terminal window and paste (command-V).
find /Sy*/L*/Ex* -type f -name Info.plist -exec sh -c '/usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$1" 2> /dev/null | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo ${1%*.kext/*}.kext' {} {} \;
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 3
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, these steps are all copy-and-paste — no typing. Also remember to post the output.
You can then quit Terminal.

Macbook Pro mid 2009 will not boot unless SMC is reset (macbookpro5,5)

Hello!
I have a mid-2009 Macbook Pro (macbookpro5,5) and I've had this weird issue for like a month, and I ran out of ideas.
So my problem is: whenever I turn on my mbp (either on OS X or Windows 7) it will go to sleep (on OS X after it shows the login screen and on Windows when it's loading) and when it wakes up, *it goes to sleep again*!
I kinda panicked back then because I couldn't get to boot the machine for all what was worth, but then I tried resetting the SMC and voila! it booted; and I thought that was it, but no, it wasn't: *I have to reset the SMC everytime I turn on the mbp*, or else the same sleeping loop will happen again and again.
This happened after installing the first March Update that Apple released (which misteriously only addressed iTunes issues - supposedly) on OS X. I already tried looking for SMC or EFI updates (just in case) and I already have the current versions (just EFI, SMC updates were never released for this mbp) so now I have no clue on what to do...
And what really puzzles me is that I disabled sleep when closing the lid on Windows 7, and it worked fine, but after this issue, it just goes to sleep, even when I see the closing the lid option on "do nothing", it's just weird.
Does anybody had some sort of trouble like that?? or anyone has some hints that may help me??
Message was edited by: piku9000

Well, it seems that apple fixed this issue in the 10.6.7 update. I kinda wish there was a little more documentation about the patches released and what files they modify, since no update was released to the SMC, I have no idea why it had to modify it. Anyway, thanks for the help!

My MBP crashes with diagonal video issues, and will only boot in Safe Mode. Now what?

My 17" MBP (2007, 2.33 mHz) crashed the other night as I was trying to copy some music off a friend's iPod. Now, on boot, it will show the gray Apple logo, then clear the screen, but never go farther (and the fan starts up a terriific rumble after a few minutes). It is also showing distorted diagonal lines across the display.
Things I've found:
* It won't boot to the OSX Leopard DVD, just spins, and spits out the Snow Leopard DVD
* If I put it in FW Target mode it will mount on my iMac, but the FW 800 port is so skitchy/loose it loses connection eventually
* If I boot it in safe mode, everything works--no video distortion, can connect to a USB drive, which I did to back up the entire contents, and I can mount the Leopard DVD
* During that backup (using Chronosync), no disk errors except for an Aperture library failure.
I'm not sure what to do next. Boot to the Leopard DVD via safe mode to renistall the system, hoping that it'll work after it restarts? If I were in OS9 I'd be using extension manager to turn features on and off to see what's crashing, but it doesn't look like I have that capability with Safe Boot.
Any thoughts would be welcome, let me know of any other info you need.
Thanks!
Oh, two other things: I ran disk utility and repaired permissions, didn't fix the problem. And I don't have one of the video cards from that era that was covered by Apple even after warranty, one of the first things I checked
Message was edited by: Paulza

http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht3964

CFP-2110 will only boot into safe mode + communication error?

Hello all,
I have a new cFP-2110 and I'm trying to configure it. I'm using Realtime 8.0, Fieldpoint drivers 5.1.2 on WIndows XP. My host computer versions match the FP controller software version and the safe-mode dip switch is in the 'off' position.
I even re-formatted the controller memory (like someone suggested in a different thread) but I keep getting the same thing: Connected - Safe Mode (Improper Installation)
Attached is a screen shot of the error I get when I try to 'find devices.' I have a good ethernet connection (although I have a yellow blinking LED on the RJ45 of the controller but not the green). I know this because I can reboot the controller from the host - It just always reboots into safe-mode. Does anybody have any suggestions for me?
Thanks - Paul
Attachments:
cFP-2110 error.JPG ‏365 KB

I finally found the problem and thought I'd share in case anyone else has similar issues:
In troubleshooting I wanted to eliminate network communication errors so I decided to connect directly to my host PC. I got a crossover ethernet cable and connected straight to my host PC's ethernet card. I had to log in as administrator on the host in order to change it's IP address to a static address. Then I re-formatted the FP controller, re-assigned it's IP and finally re-installed the RT and FP drivers. Finally - I had a normal connection!
This made me wonder if it was being directly connected to the host or being logged in as an administrator that was the fix. So I went to a second host PC, logged in as administrator (leaving it as a normal network connection), reformatted my second controller and re-installed the software - and hot damn - it worked!
Moral of this story is - be logged in as admin. before attempting to install any software...

Installing Windows 7 on MacBook Pro mid-2010 13" with Mavericks?

Hello, my 13" macbook pro mid-2010 is only capable of running BootCamp 4, but has Mavericks which can only run BootCamp 5. Is there any way to get around this to install Windows 7 through Bootcamp or any ways to downgrade from Mavericks to Mountain Lion without a Time Machine backup? I also know that virtual machines and Parallels are out there, but I need a separate partition for Windows for gaming.
Thanks.

I just got off the phone with Apple Support. They have decided to make MacBook Pro mid 2010 models non-compatible with BootCamp 5. They have also decided to make OS Mavericks only compatible with BootCamp 5. Therefore it will not work at all unless you downgrade your OS. It is not possible to use BootCamp on mid 2010 MB Pros with Mavericks.

MacBook Pro 13" Only boots to safe mode and running VERY slow.

Hi...
Not posted on here before, but am desperate so hoping there are some experts out there who can help...
I have 13" Macbook pro which has ceased to work properly - it runs very slowly and will only boot in safe mode.
I have installed a new hard disk, but I get the same problem whether I (try to) boot from the old HHD or the new one.
The new drive was imaged using Carbon Copy Cloner.
I have run the repair disk priorities in disk utility and verifying the disk says all OK.
I have set the startup disk to be the new hard disk, and cleared the NVRAM via cmd-option-p-r...
As things stand at the moment, rebooting (not in safe mode) leaves me with the grey screen and apple logo (and no obvious activity for 10+ mins (so far)).
Booting in safe mode takes 3+ mins but I do get to a user login prompt and can get to a desktop.
Any ideas / help very much appreciated as I urgently need to get this machine working!
Thanks!

Domonic White,
when you ran Disk Utility, did you do so from your user account, or from Recovery mode? There are four options there: Verify Disk Permissions, Repair Disk Permissions, Verify Disk, and Repair Disk. Which of these did you do in Disk Utility?
Have you tried resetting your MacBook Pro’s System Management Controller?
Have you tried logging in as your administrative user, opening the Users & Groups pane of System Preferences, creating a new standard user (e.g. “Test”), and trying to log in as the new user, to see if the slow performance affects the new user also?
There is a chance that this could be due to a faulty internal SATA cable. If you have an external disk enclosure, or a SATA-to-USB or SATA-to-FireWire adapter, try booting from one of your drives when it’s externally connected. If it works fine that way, but is sluggish when internal, that could point to your internal SATA cable as the culprit.

2011 MBP only boots in safe mode after yosemite update

After attempting to update to yosemite, 2011 MBP (16GB Ram, 1TB HD) will only boot into safe mode. If I reboot without holding the shift key, I get the Apple logo and progress bar ......... that never goes away, just hangs about half way through. Any help?
Dan

Hey there Danielrbjo,
It sounds like you are unable to boot your mac without using Safe Boot. I would use the other troubleshooting from the following article, named:
Mac OS X: Gray screen appears during startup
Disconnect, test peripheral devices and network cables
Note: "Peripheral devices" refers to external devices other than what came with your Mac, such as hard drives, printers, or hubs that you connect via a USB or FireWire cable.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Disconnect all peripheral devices such as external hard drives or printers (leave only the display, a keyboard, and mouse connected).
Disconnect any Ethernet cables.
Start up your Mac.
If you can start up this way, one or more of your peripheral devices (or installed software related to the device) is probably causing the gray screen issue. Connect one device, then restart your Mac to test for the issue. Repeat the process until you locate the device at issue. Make sure the device is powered if it needs to be to operate correctly. Check with the manufacturer of the device for support or possible software driver or firmware updates that may be available for the device. Try a different cable with the device if possible (such as a different USB or FireWire cable).
Note: If you have multiple peripheral devices and the issue only occurs when they are all connected, but not when each device is the only peripheral connected, see the Additional Information section below.
If you are using a desktop Mac with a third-party keyboard and/or mouse device, and the issue still occurs, try starting up with an Apple keyboard and mouse connected instead. Try starting with no keyboard and mouse connected, then connect them after start up. Also, try a different USB port on your Mac.
If the gray screen issue persists with no devices connected, go to the next section (with the peripherals still disconnected).
Reset the NVRAM / PRAM
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Reset the NVRAM / PRAM.
If the gray screen issue persists, go to the next section.
Remove third-party RAM and internal hardware
Remove any non-Apple RAM or other third-party hardware upgrades (such as expansion cards or third-party optical drives or hard drives, if present) to help isolate the issue. This is necessary to get as close as possible to the original factory hardware configuration of your Mac.
If you are not sure which RAM modules or other hardware is Apple or third-party, or if you are not comfortable performing these steps, or if you have a Mac mini, consider contacting an Apple Authorized Service Provider for assistance. Otherwise, perform these steps before going to the next section.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Open your Mac to access the memory slots. Refer to the User Guide that came with your Mac, or search Apple Support Manuals for a PDF copy of your Mac's User Guide.
Remove any third-party RAM that has been installed.
Reinstall the Apple RAM that came with the computer if available. Note that Mac OS X 10.5 requires 512 MB or more of RAM; Mac OS X 10.4 requires 256 MB or more of RAM.
If your Mac starts up with only Apple RAM installed, contact the vendor of your third-party RAM.
If you have installed a third-party drive, ensure it is running the latest firmware. Otherwise, reinstall the Apple drive that came with the computer if available.
Thank you for using Apple Support Communities.
All the best,
Sterling

BootCamp 5.0 error on 13" MacBook Pro Mid-2010: "Installation Error. Boot Camp x64 is unsupported on this computer model"

Installing Boot Camp 5.0.5033 (downloadable at http://support.apple.com/kb/DL1638) on Windows 8 x64 on 13” MacBook Pro Mid-2010 using BootCamp\setup.exe, I get the following message: “Installation Error. Boot Camp x64 is unsupported on this computer model”.
According to http://support.apple.com/kb/HT5634, Windows 8 x64 is not supported by Boot Camp 5 on 13” MacBook Pro Mid-2010 .
Previous version, Boot Camp 4.0, causes bluescreens on Windows 8 (https://discussions.apple.com/message/20131524#20131524).
Fortunately, it might be still possible to employ updated Boot Camp by launching “msiexec /i BootCamp.msi” from BootCamp\Drivers\Apple folder using administrative command prompt (http://technet.microsoft.com/en-us/library/cc947813%28v=WS.10%29.aspx).
However, new Boot Camp 5.0.5033 does not contain all the drivers for 13” MacBook Pro Mid-2010. E.g. driver for NVIDIA nForce System Management Controller (labeled Other devices/Coprocessor in Control Panel) and NVIDIA nForce PCI Systems Management (labeled Other devices/SM Bus Controller in Control Panel) must be obtained at Drivers\NVidia\NVidiaChipset64 in older Boot Camp 4.0 (downloadable at http://support.apple.com/kb/DL1634)
According to Microsoft (http://windows.microsoft.com/en-US/windows-8/system-requirements), the MacBook Pro config (Intel Core 2 Duo P8600 2.4GHz, 4GB RAM) exceeds Windows 8 x64 hardware requirements. Windows Experience Index for this laptop is approx. 5.1 (http://windows.microsoft.com/en-US/windows-8/what-windows-experience-index).
Does anybody know, is there any technical reason why Windows 8 x64 is not supported by Boot Camp 5 on 13” MBP Mid-2010?
Is there a specific hardware/firmware deficiency in this MacBook model, incompatible with Win8? Maybe NVIDIA refused to provide Win8-compatible drivers for its chipset components (GeForce 320M graphics card though is still supported by latest notebook drivers available at www.geforce.com)?

Thanks for the detailed explanation! If MacBook supports AHCI/SATA only in native “UEFI mode”, while reverting back to PATA/IDE in legacy “BIOS mode”, then it could make perfect sense to use UEFI to make sure that technology like Native Command Queuing (NCQ) is employed, as it may give noticeable performance improvements for certain operations: www.happysysadm.com/2012/12/intel-g530-nas-performance-part-3.html. I wonder how do you get Windows 8 x64 with EFI bootloader installed on MacBook?
Simply choosing EFI Boot (“Some EFI platforms support both UEFI and BIOS firmware. On some of those systems, it is not always clear if the default DVD boot option is an EFI or BIOS boot option. On these systems, using the EFI shell command may be required. If you do not specifically start Windows Setup by using the EFI boot entry, the default firmware boot entry for BIOS may be used. If Windows Setup starts in BIOS mode on a combined EFI/BIOS system, the ESP and MSR partitions are not created.”) from Win8 x64 DVD when installing on blank HDD would yield “The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed" message. Also, if the hard drive was not in SATA mode during Windows installation, registry tweaking may be required before switching from PATA to SATA. Do you do registry tweaking and EFI bootloader configuration manually after a copy of Windows was installed in its dedicated partition in a regular way?

MacBook Pro (Mid 2010) will only boot in safe mode.

Similar Messages

Maybe you are looking for