MacBook Pro Mid-2011 screen freaks out, goes psychedelic

Been using and taking care of Macs since 1985, and I've never seen this before. Anyone? Graphics card going south maybe?
Reboot fixed the problem, but I'm concerned about it returning.

Been using and taking care of Macs since 1985, and I've never seen this before. Anyone? Graphics card going south maybe?
Reboot fixed the problem, but I'm concerned about it returning.

Similar Messages

  • 13" Macbook Pro (mid-2011) audio in/out problem in Bootcamp Windows 7 64-bit

    Hello,
    I have a 13" MacBook Pro (mid-2011) and when in Windows 7 (64-bit) there is no way to configure the single combination audio in/out port to be an input. It is by default assigned to be an audio output and it cannot be configured otherwise in the Sound manager in Control Panel. In OSX the port is configurable. The audio driver is Cirrus 4206A (AB28), dated 12/3/2010, version 6.6001.1.30.

    I forgot to add that I installed the Bootcamp drivers from the OSX disc after I installed Windows 7 as instructed

  • Just upgraded to OSX mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?

    Just upgraded to OSX 10.9 mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • I was installing soundflower macbook pro mid 2011/Snow leopard Grey loading screen

    Hello i was installing soundflower for my macbook pro mid 2011/Snow leopard. However when finishing the installation for soundflower and click restart computer my mac now has a grey screen with a loading bar that doesn't finish. I already try safe mode and it doesn't work. Is there a way to disable sound flower installation?

    No. You use "C" to boot from the optical drive
    Hold down the Option key to select a different disk drive to boot from
    When it comes up with all the disk that have an operating system on them, select the one with the bootable clone on it
    Allan

  • Macbook pro mid 2011 battery lasting only 3 hours

    How can I get my brand new Macbook pro mid 2011 battery to last longer, now it's lasting only 3 hours.

    Do not believe the advertised specs from any manufacturer regarding battery life.  In the real world expect about 60% to 70% of those figures.  Battery life is influenced by many factors,  Among these are display brightness, the number and type of applications you are running, if the optical drive is used, external devices that may be attached etc.
    3 hours seems a bit low but not necessarily out of line.  Go to SYSTEM PROFILER>POWER and see what it says by 'Condition'.  If it is other than 'normal' you may have battery issues (Explanations then can be found in FINDER>HELP).
    Ciao.

  • I have a Macbook pro mid 2011 and just bought the Apple TV. While watching program or movie from any of the apps such as Watch ABC, the program keeps stopping and starting constantly.

    I have a Macbook pro mid 2011 and just bought the Apple TV. While watching program or movie from any of the apps such as Watch ABC, the program keeps stopping and starting constantly.

    That would indicate a network issue.
    Reboot ATV and router
    Make sure DNS is set to auto
    Ensure router is up to date, if on wifi try ethernet
    Go to istumbler.net to get a report of the network, look for signal strength and noise

  • HT204267 Macbook Pro Mid 2011 Wont Boot

    I have a macbook pro mid 2011 but wont boot. THe charging light and the power light in front come on but it does not make the start up noise nor anything like.

    For those driving north of Belize, some distance into Mexico, there are
    some authorized service providers and some independent resellers...
    These are not exactly convenient to Belize users of Apple products.
    And then there's Puerto Rico... between shipping & duties, + costs.
    https://locate.apple.com/pr/en/
    A different look into the Apple country locator may show retail resellers
    though of those, as they are not Apple Store (company) those likely do
    not offer a Genius bar such as the US & Canada. One could use Apple
    locator page to see Apple sales independent affiliated resellers in Mexico.
    Cancún area has three companies (total four locations) for Mac service.
    Mérida  apple retail independent resellers (seven) + two premium "iShop" w/ service
    https://locate.apple.com/mx/en/sales/?pt=all&lat=21.0023779&lon=-89.609860299999 98
    Cancún  apple Mac authorized service independent providers (four shown this location)
    https://locate.apple.com/mx/en/service/?pt=4&lat=21.161908&lon=-86.8515279000000 1
    The Apple country locator page shows Belize -- But there are no listings in the Belize result.
    Appears there may have been or could be some body there who had a business, once?
    Sorry to say it would appear you have limited options, for sales and service;
    when my dad lived in western Belize for 4 years and had Mac computers,
    they took their own and backups. Occasional visits to the US allowed the
    units to get service or repair a few times each year, if taken along.
    Good luck & happy computing!

  • MacBook Pro late 2011 screen goes blank and needs shutdown and superdrive spins 3 times before ejecting discs

    Hi everyone,
    I have a big problem with my MacBook Pro late 2011, suddenly while working without connecting the charger and it is 100% charged the screen would go black and I would need to hold the power button to shut it down and then power it up again, The second issue is the superdrive whenever I use a disc it spins it for 3 times before ejecting it to me, tried resetting PRAM and tried re-installing mac os x mavericks, but no solution so far and about the superdrive I bought a cleaner disc and tried to insert it, the superdrive would spin it 3 times and ejects it after that. Saw the disk permission solution and tried it once and I think there is a problem with that because this is the second time I try it and it was saying that there were problems.
    Sorry for being long.
    Thanks in advance.

    Depending on what you are doing on the computer, how hard you are working the computer, it should not overheat. And if it does it should shut down or get very slow because when it starts to overheat the CPU will be throttled back to a lower Ghz speed and or just shut down so it doesn't cause damage to the CPU. The Kernel Panics are a sign that something else is going on. This could be software or hardware.
    If after wiping the drives and reinstall Lion on the SSD if the system is running OK then the drives are fine, IE they are not bad. There is something else corrupting them. Again this could be hardware or software, but I doubt it is heat. And using the MBP ion clamshell mode should not cause overheating or excessive heating of either of the drives.
    Have you installed iStat Pro or Menu and kept and eye on the temps? If not install iStat Pro and keep and eye on the temps. I bet they do not get above the 150°- 180°F mark which although hot is not overheating.
    Be very careful when calling Apple. Removing the DVD drive and installing a hard drive in that bay could void your warranty. The DVD is not a User Removable part and Apple frowns on doing that. So if you call them do not mention that you have replaced the DVD drive with another HDD.
    Honestly I suspect you have a hardware problem. But the only way to know that is to install just Lion and your basic programs and run the system. Leave out any AV type software, if you are running some. If you don't get any kernel panics thenn install some of your other software, one programm at a time. If with just the OS and basic software you get a kernel panic then it is hardware related and needs to be checked out by Apple. If you do that re-install the DVD and the original HDD with just the OS on it before you take it in.

  • Macbook pro mid 2011 video card problems

    Hi. I have a Macbook pro late 2011 and a have problems with my graphic card. I read 150 pages about this problem in apple forum, but don't receive any solutions to resolve a problem.

    Well I got same problem today in OS X and when I restarted I got following screen and after few minsutes Laptop was switched OFF Automatically. I powered ON again ang got same screen but this time I quickly press CMD + C and screen goes normal this time.

  • What is the limit with RAM upgrading on a Macbook pro (mid 2011)

    I'm looking for a suitable upgrade for my ram, but I don't know if there are models that are incompatible with my Macbook Pro model.
    I have a 13 Macbook Pro 2.7Ghz from mid 2011.
    I have a couple of possible RAM models to purchase such as:
    Corsair SO-Dimm 8GB (2x4GB) DDR3 PC3-15000,1866MHz
    Kingston 8GB 1600 MHz DDR3
    Are there any limitations regarding the speed I can install on my machine?

    Max 16GB's of 1333MHz DDR3 SO-DIMM PC10600 204 Pin is the correct RAM for your computer.

  • Macbook pro mid-2011, has graphic issue?

    Hi, I am using macbook pro 2.7ghz,i7,4gb,hd graphic 3000 which i  just purchased in the mid-2011 to replace my old macbook.
    Everything seems fine until I reinstall the sims 3 to my new macbook pro. The video's works fine, but when i entered the create household,
    it shows the person's eyes and thumbails were not clear. The details setting of the game, has been set all to low which is the default setting. I have tried to increase some setting to medium or high, but it have not make any changes. Any solution?

    it was working fine with my old macbook, and my sister who is using macbook pro 15" also works fine. I also installed the sims medieval, but the same issue occurs. i have the latest update for macbook pro sofware and also the sims.

  • Macbook pro mid 2011 problem to eject usb hd

    Hi, using a macbook pro 13 mid 2011 with w7 professional 64bit
    I've a problem almost every time I connect an external hd to the usb
    and then i try to eject it using the icon on toolbar... the hd usb is seen
    like external keyboard... So if I eject it the macbook pro crashes...
    the internal keyboard stop working. Any one has a solution ?
    It's a very annoying problem.
    Thank Yoy.
    F.C.

    This sounds like a Windows configuration issue.  Have you tried using the device manager to "remove device" on the HD while it's attached?  THis should remove the drivers, etc, then allow you to re-connect it and let the OS re-detect and load drivers.  I would think that this would allow the OS to select the right driver for the external HD this time instead of the HID driver...

  • Buggy OS X Mavericks on Macbook Pro Mid 2011

    1.) Using 4 Fingers gesture to show list of applications. Scolling them from left to right or right to left is not that smooth as previous OS version.
    2.) Mac App Store - iPhoto and iMovie are totally buggy. after i download this apps the "install" button became blurred but when after i restart my laptop its shows 0 kb of 1.1GB again and shows the "resume" button again and again.
    so far this are my problems that i encounter.
    Anyone out has same problem with me. Hoping so that i will not feel alone.

    Same Here I don't think its machine spefic though..  I have issues on my MacBook Pro 2011 with Mavericks but so does my Parents iMac and my Uncle's 2009 Macbook Pro too.  I am a heavy user of iPhoto / Aperture but have noticed tons of bugs using those Apps since the Mavericks update.  Everything from opening iPhoto to importing photos causes iPhoto to hang or stop running.  My fans speed up to infinity and beyond, about 5500 rpm.  In iPhoto the Menu bar becomes unresponsive unless I click on an Event rightaway not to load whole library.  Noticed the same sort of issues on my Parent's iMac as well with same type of misbehavior in iPhoto.
    Besides iPhoto other Apple Apps from time to time fail to quit during exit of the Application.  Like in iTunes sometimes hangs on quit or crashes altogether.  iTunes playback skips more frequently too..  Whats weird non Apple apps tend to work, basically no crashes or glitches..  For the iTunes playback of video or music will start to skip after a few minutes of playing, if I take that same file and play in VLC or other third party Media App flawless playback of file..  Same with media on the Net I mostly use Chrome no issues playing my music via Google Play or watching video on Youtube all play wonderfully.
    Just before the Mavericks update when I was on Mountain Lion these issues weren't present..  I have notified Apple Support via the Feedback form, they have gotten back to me and are aware of my issues, I am very impressed with Apple Support staff...

  • Macbook Pro Mid 2011 Upgradeable?

    I am looking to buy a new macbook pro once Lion comes out and comes on the new macs
    But I am wondering if I can install my own hard drive in the current line of MBPs
    I ask because Apple made the iMac hard drives in the new line proprietary so that you cant just buy a drive from newegg to replace the stock drive. So I need to know if I have to pay up front for the part, or if I can buy a new HDD offline later on to upgrade my storage capacity

    ch0b1ts2600 is dead on.
    You'll need a 00 micro phillips head screwdriver (prefereably magnetic) and a compartmentalized plastic container to replace all the screws into the right holes. Also you need to work on something that will catch the small screws, like a sheet or a large matt. They are very tiny.
    Here is a dead simple guide.
    http://www.ifixit.com/Guide/Repair/MacBook-Pro-17-Inch-Unibody-Hard-Drive-Replac ement/3401/1
    When you get the drive, use the free Carbon Copy Cloner to clone your internal drive to a blank (first Disk Utility > Erase w/ Security Option Zero, HFS+ Journaled formatted) USB or (better) FireWire 800 drive.
    http://www.bombich.com/
    You then hold option and boot from the clone, run Disk Utility > Repair Permisisons on both drives and check out the clone, make sure it works.
    Then you do the hardware swtich, hold option and boot off the clone and then format the drive like above and reverse clone.
    Piece of cake.
    As a extra, you should run all of OnyX's maintanence and cleaning aspects too.
    http://www.titanium.free.fr/

  • I installed bootcamp 4.0 4033, installed window 32 bit but can't install the drivers for some reason i keep getting error message. i have a macbook pro mid 2011 version. Please help

    I installed bootcamp 4.0 4033 so that I can install windows 7 32 bit on my mac.  Everything works fine until I try to install the drivers and I get an error message stating the version of windows does not work with the drivers I am trying to install.  I have a feeling somehow I am downloading 64 bit drivers when I need 32 bit.  I spoke to Apple and they said I can't use 32 bit windows.. but that is not what the support site says (it says I can as long as I use bootcamp 4, not 5).  Also, my bootcamp assistant is version 5.. I have no idea if that matters.  Help please.. been searching online for hours. 

    What model/year is your Macbook Pro? What operating system version?

Maybe you are looking for

  • Opening and closing Posting Periods in New GL

    Can anyone tell me how to open and close postings periods for leading and non leading ledgers if new gl accounting is active in the system.Is it through OB52 or some other codes. rgds Anuradha Ambekar Tcs.

  • How do I get to the 'Print Mode Choice Box' in the Apple provided software for a Canon Pixma IP6210D Series printer?

    I downloaded the Apple software for my Pixma, IP6210D series printer.  There is no 'Color Matching', option or 'print options', pop up menu available.  According to the instructional book that came with the printer - the Mac how-to section those opti

  • Make http header available webservice layer

    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; charset=iso-8859-1"> <META content="MSHTML 6.00.2900.2627" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY> <DIV align=justify

  • Help with a SQL Query

    Per my clients requirement, they need to pull all patients  with two qualifying visits in the past 2 years. What I have now, I believe is just ones for the past year - looking on ways to better imporve the coding to pull this info. SET NOCOUNT ON DEC

  • Customer exit variables

    Hello, I have created two customer exit variables, although I'm not an ABAP expert. Both are calculated based on two optional variables selected by the user. When running my query I get the message "Warning Value '' is too long for variable ZPERSTRT"