Macbook Pro (mid 2012) Disk Utility can't repair HD
I have a friend's MacBook Pro in my possession that is not working and has not been used for about two months. After startup, seeing the loading bar, and getting stuck on the spinning wheel of death, I have taken some steps to try to get a boot into Mac OS X. I've reset the PRAM, tried booting in safe mode, and lastly tried to repair Macintosh HD via Disk Utility in the recovery partition. No luck. I get this message after an attempted repair.. "Disk Utility can't repair this disk...disk, and restore your backed up file".
This is a similar problem to this discussion thread here:
Disk Utility cannot repair Macintosh HD
However, in this scenario, my friend does not have any Time Machine backups and would like to recover his files.
I know that I can re-format and do a fresh install of OS X...but where does that leave me with file recovery?
Is it possible to retrieve the files at all?
Any help from the community would be GREATLY appreciated!
Thanks
I have a friend's MacBook Pro in my possession that is not working and has not been used for about two months. After startup, seeing the loading bar, and getting stuck on the spinning wheel of death, I have taken some steps to try to get a boot into Mac OS X. I've reset the PRAM, tried booting in safe mode, and lastly tried to repair Macintosh HD via Disk Utility in the recovery partition. No luck. I get this message after an attempted repair.. "Disk Utility can't repair this disk...disk, and restore your backed up file".
This is a similar problem to this discussion thread here:
Disk Utility cannot repair Macintosh HD
However, in this scenario, my friend does not have any Time Machine backups and would like to recover his files.
I know that I can re-format and do a fresh install of OS X...but where does that leave me with file recovery?
Is it possible to retrieve the files at all?
Any help from the community would be GREATLY appreciated!
Thanks
Similar Messages
-
Macbook pro mid 2012 backing up from disk ulitiy asking for "login" keychain?
I bought a "WD My passport For Mac 1TB" portable external hard drive since I can't get into my macbook pro mid 2012 10.9 because when I turn it on its just grey screen with apple logo and spinning wheel. I went to future shop to the geek squad and they did diagnose of it that is wasn't the hard drive but the operating system with problem. Which makes sense since I did the apple hardware test, disk repair/verfy, permissions repair/verify and they all came back with saying my volume is ok etc.
SO my question is to back up my files etc. I do the command + r and go to disk ulitiy and click on "Macintosh HD" and then click "New Image" and then select "My Passport for Mac" to save on there. What I want to know should I put "compressed", "read/write", "read only" or "DVD/CD master" for Image Format? AND For encrytion, do i pick "128-bit AES encryption (recommended)" or "256-bit AES encryption (more secure, but slower)"?
Also I have one more option before I go to my genius appointment on saturday is to do the "erase and reinstall" option. Of course I need to back up my files to do that which is why I am asking the questions above. Can any one link me to the "erase and reinstall" option OR tell me your experience on how to do it OR how to do in overall? Also, is it an effective method? I already have the important files on my google drive, have my microsoft disk stuff on my USB, the only app I kind of don't want to lose is my "Notes" app. Also for the apps I downloaded in Apple store they should be still there even if I erase my hard drive?
So I did the command + r and go to disk ulitiy and click on "Macintosh HD" and then click "New Image" and then select "My Passport for Mac" to save on there. I put "read/write" for Image Format AND For encrytion, i pick "128-bit AES encryption (recommended)"
I put in a password when prompted but after that it says "Disk Ultitiy wants to use the "login" keychain." I put in my ususally login password that I use to get on to my desktop but that doesn't work. I have the option to press ok or cancel. Can I just press cancel and will it contiune on backing my files to my external hard drive?
I pressed cancel and the progress bar to saving my macintosh HD to MY external hard drive portable isn't shown any blue bar progress for 9 mins now...
do u know what to do?If you like you can also restore, via Disk Utility, the DMG onto another disk, but you will be able to read the contents, simply mounting the volume inside any version of OS X.
^ What do you mean by this?
Also, It says on here:Mac OS X v10.5, v10.6: How to back up and restore your files - Apple Support
When the imaging process is complete, select the newly created disk image in the device pane. Then, choose Images > Scan Image for Restore... from the menu bar, and let the scan complete.
Quit Disk Utility (press Command-Q). Then press Command-Q to quit the Mac OS X installer; you will be prompted to restart.
Restoring the backup disk image's contents to your internal Mac OS X disk
What does Images > Scan Image for Restore mean?
Also If I erase hard drive and then reinstall mavericks OS X from "command + r mode" and after that hopefully I can get back in would I hook my external hard drive and then open the copy of the "macintosh".dmg and drag everything back on? or...? -
Macbook pro mid-2012 13" has very slow disk access
Until 3 days ago my macbook pro mid-2012 13" running OX 10.8.3 was running fine. Then, it showed very slow response anytime it had to access the hard disk. After doing the usual checks and disk first aid repairs to no avail, I booted from my external disk with an older copy of my hard disk and everything then worked as normal, except when I accessed the internal hard disk, then it crawled once again (spinning beach ball, took many seconds just to open a finder window and then several minutes to display the contents). I ran the Apple Hardware Tests and it said everything was fine, even though it tooks several minutes before the test would actually start. I also ran the program BlackMagic Speed Disk to find out if the disk was having transfer speed problems and it showed a respectible transfer rate (60MB/s), not great but not like the 0.3MB/s I was getting when I tried to back up the internal disk. I was using Carbon Copy Cloner to try to back up the internal disk but had to give up since at 0.3MB/s, it would take days to back up the 250GB on the disk. I found on the web that using "restore" in Disk Utility, I could do a disk copy without the file by file copy which allowed me to back up my disk in "only" 6 hours. Booting from my newly made copy on an external disk worked fine and ran at nearly normal speed (slightly slower since it was an external disk running through USB2). As a final attempt to prove this was a disk problem, I erased the internal disk and reinstalled OSX 10.8. I am still waiting for this install to finish, it has been 5 hours although the progress bar said it should be done in 20 minutes. This was fairly convincing evidence that it is not a software or settings problem. However, all my web searches could find no other case of a problem like mine. I presume I have a failed hard disk but as all the diagnostic programs say it is working fine, I was hesitating to bring it in without hard diagnostic evidence. If anyone knows what might be the problem, it would be much appreciated to hear from you.
It should not take 5 hours to install Mac OS X. There is something wrong with the disk. Try reformatting where you do a wipe of the drive (an select the option to write zeros which will remap bad sectors). Then try to install MAc OS X.
I got this information from here:
http://reviews.cnet.com/8301-13727_7-20064489-263.html
Back up your data.
Use Time Machine or a system cloning utility to create a full and restorable backup of your data. If you suspect bad blocks, then when cloning you might consider not using a "block-level" copy process, since this will likely run into problems.
Boot to the utilities DVD.
If you have a boot DVD for a tool like Drive Genius or another drive utility, then boot to that; if not, use your OS X installation DVD (once you select your language, open Disk Utility from the Utilities menu).
Format the drive.
Using your selected utility, format the drive and check for bad blocks. If you are using Disk Utility, click the Erase tab, click the Options button, and then select the option to write zeros to the disk (you do not need to do multipass erase options, as this will provide no additional benefit for managing bad blocks). Writing to zeros may take a couple of hours depending on the size of the drive, but when done the drive will have remapped any blocks that were not reliably read.
Restore the OS installation.
If you have used Time Machine to create your backup, boot to your OS X installation DVD (if you are not using Disk Utility) and use the option in the Utilities menu to restore from backup. Attach your Time Machine drive and then proceed with the restoration, selecting the newest backup as the one to restore to your system. If you have used a system cloning tool, then attach the cloned drive and boot off of it (hold the Option key at start-up to select it from the boot menu). When you are booted to the cloned drive, run your cloning utility to copy the installation back to the computer's main boot drive.An optional approach here is to perform a full reinstallation of the OS from your installation DVD, and then migrate your data, applications, and settings from either the clone or the Time Machine backups using Apple's Migration Assistant. -
How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.
Target Display Mode: Frequently Asked Questions (FAQ)
with a mini display to mini display cable. Attach it to the Thunderbolt port on your MBP and to the mini display port on your iMac.
How do I enable TDM?
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2. -
Can I use my macbook pro mid 2012 as an external display using thunderbolt port
Hi,
I want to use my macbook pro (mid 2012) screen as an external display for a raspberry pi using a HDMI to Thunderbolt cable, via the thunderbolt port on the macbook pro. Would this be possible? Can the macbook pro's thunder bolt port act as an input and is any additional software required?
I look forward to hearing from you.
Thanks in advance!Welcome to Apple Support Communities
You are referring to Target Display mode. Target Display mode can only be used in 27-inch iMacs and iMacs with Thunderbolt, not MacBooks Pro > http://support.apple.com/kb/PH11302
Unfortunately, you can't use the MacBook Pro as a display. It doesn't support the monitor mode -
Migration Assistant can't find External HD on MacBook Pro Mid-2012
Hi, I have a MacBook Pro Mid-2012 running OS X Mountain Lion 10.8.2 and I am trying to use Migration Assistant to transfer Time Machine backups that are on my external hard drive, that I backed up from my old MacBook Mid-2010. The problem I am having is that Migration Assistant can't find my external hard drive. My MacBook Pro can find it when I plug it in (I see it in Finder), but Migration Assistant can't. Can anyone help or should I go to the Apple Store? I need help with this problem as soon as possible.
Thanks in advance,
- Daniel Since no one replied I figured out how to do it myself.
1.) First I plugged in my external hard drive with my Time Machine backups on them, then I opened Finder and click on my external hard drive under devices.
2.) Next I clicked on and opened the folder named "Backups.backupdb"
3.) Once inside that folder I could see folders with the backups from Time Machine and all of the folders names were the date I backed up that backup. I clicked and opended the lastest backup folder.
4.) Inside that folder, I clicked and opened the folder named "Macintosh HD"
5.) Inside that folder, I clicked and opended the folder named "Users"
6.) Inside that folder, I clicked and opended the folder named "Daniel" which was my Username on my previous Mac.
7.) Finally I could see and access all my folders from my Time Machine backups from my previous Mac.
Keep in mind this is only helpful if you are trying to access old backups (backed up from another Mac) on a new or different Mac. (Sorry for the blurry images)
Hope this somehow helps someone else,
- Daniel -
Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate
uhm hey guys,
idk where else to get help so ima try here,
i got windows 8 installed with bootcamp on my macbook pro late 2010 (5, 5) and theres no sound coming out of it, so i installed an nvidia audio driver (idk, it could be the incorrect one) but i have nvidia GeForce 320 on my macbook.
do you know what i should install ?
but when i go onto my osx the sound is fine, so i figured im missing something on windows 8
Orrrr could i just go out and get parallels and hope it doesn't get the same problems? -
Macbook Pro not booting after update. ''Disk Utility can't repair disk''. Help needed!
I have recently updated my macbook pro as I had some pending software updates. I left it to do the job over night and the next day I noticed it was not letting me sign in to my account session as usual.
I restarted the computer and ever since then when I boot it, it just shows the apple grey screen with a bar that loads to about a 3rd and then it turns off again. I have contacted apple but they were unable to help me with this.
So far I have tried to:
1. Re-install OS X 10.8 - but it says the disk is locked or OS X cannot be installed on Recovery HD.
2. Verify and Repair the disk and I errors but it cannot fix them. Some are:
'invalid leaf count''
''missing thread record''
''incorrect number of file hard links''
''overlapped extent allocation''
and it finally says ''the volume Macintosh HD cannot be repaired'' Error: ''Disk Utility can't repair this disk.. disk, and restore your backed up files.
I would like to know a way to back up my files so that i can completely restore the disk without any data loss as I havent backed up for a while!
If anyone has any solution to this issue it would be much appreciated!I just ran the Disk Utility, and cannot very disk. It gives me an error message;
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
and when I run the repair, this is the message:
The volume GERRARD could not be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error
Repair attempted on 1 volume
1 volume could not be repaired
Prior to running Disk Utility, I have already tried DiskWarrior, and could not repair my disk. Anyway I can fix this problem??? Formatting the disk would be my last option (though I am unsure if it will fix the problem). Any advise would be greatly appreciated. Meanwhile, I will continue to back up my file, and delete unused data and try to run it again.
Thank you all very much for any input.
Cheers,
Matt -
My macbook pro froze and initially would not even recognize the power chord. Now it charges, but will not load up. I opened in in disk utility to try and back it up so that I could take it to apple to have it fixed but I got the message that said "disk utility can't repair this disk backup as many of your files as possible". How do I back up the files???
Nichelle215,
you can try the method described on this Apple page, in the “Instructions for backing up to an external hard disk via Disk Utility” section. (You can skip step 6, since you already know that your disk is irreparable.) Note, however, that this method is not guaranteed to work. Once you get your disk straightened out, you might consider purchasing an external hard disk for use as a Time Machine backup destination, so that a similar problem in the future won’t wipe out the only copy of your files. -
Can Apple replace my macbook pro (mid 2012) retina's battery if I think that the battery health has gone bad/in need of and renewal???
I've had my Macbook for about 11 months now and i use it every day; its gone though about 420 cycles of charging and using the power, and i noticed the battrey preformance has decreased (as expected). The problem isn't sevear yet but it would comfort me knowing that i could replace the battery in the near future
Please contact me or answer the question if you know anything about this!Exitio\'s Apple wrote:
Can Apple replace my macbook pro (mid 2012) retina's battery if I think that the battery health has gone bad/in need of and renewal???
No only if they think under warranty/AppleCare, but your likely able to pay for a new battery if they have them, which they might not yet since it's such a new machine still.
BTW, I have a Early 2011 17" MBP, 27 months old, charges to 97% and has only 14 cycles. -
My MacBook pro mid 2012 doesn't seem to have a "save as" function, so I can't seem to save multiple page pdf's together after moving thumbnails into the sidebar. It only saves the first page.
I do have a 2008 version of Microsoft Office installed to save money, but that shouldn't affect things. I can't figure out the "rename" function either. Help?Oh, and I also reset my NVRAM, my computer hasn't frozen again yet, so I'm not sure if it has made a difference.
-
I recently saw that for os x server apple says that you can run it on inexpensive hardware like mac pro, imac and mac mini. It doesn't say anything about notebooks. So if i buy os x server will i be able to run it on my macbook pro mid 2012 with i5 2.5 GH, 4 Gb RAM and 10.8.4?
Thanks.Welcome to Apple Support Communities
OS X Server is compatible with any Mac that runs OS X Mountain Lion, so you can install it on any MacBook, MacBook Pro, MacBook Air, iMac, Mac mini or Mac Pro that supports Mountain Lion > http://www.apple.com/osx/specs
Just open the App Store and purchase OS X Server. The app will appear after finishing the download, so follow its steps to set up OS X Server on your computer. You will be able to install it for free in all your computers after purchasing it. If you want more information about OS X Server, read > http://www.apple.com/osx/server/ -
The update "MacBook Pro (Mid 2012) Software Update 1.0" can't be applied
When trying to update my new Macbook Pro with Retina through Apple's software update application, I get the error:
The update "MacBook Pro (Mid 2012) Software Update 1.0" can't be applied
The update could not be expanded, and may have been corrupted during downloading.
I've already went through the process twice to download this update.Same type of error, but getting 90% downloaded and error message that the update cannot be saved. But it then goes to the screen to apply, but with 90% only - no instructions that it will only download 90% and the rest will come during the update - not going to apply.
-
HT1270 Can I replace PC3 1600 memory with PC3L 1600 memory? MacBook Pro mid 2012, i7 2.3 15"
Can I replace PC3 1600 memory with PC3L 1600 memory? MacBook Pro mid 2012, i7 2.3 15". I know PC3 memory runs on 1.5 volts, PC3L runs on 1.35 volts.
Are they compatible with my Mac?http://www.crucial.com/usa/en/memory-info < Find compatible memory
MacBook Pro (15-inch, Mid 2012) - Technical Specifications
MacBook Pro: How to remove or install memory - Apple Support -
hello, I am trying to reinstall os x lion in my macbook pro mid 2012, from my recovery disc, and its imposible because every time I have problems to download de installer or something that is required to do that. what can I do?
When you do get it downloaded, before you do anything else, save the Lion installer - make a copy and put it somewhere safe. you can then reuse, make a clean install and other things.
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Migration Assistant Update for Mac OS X Snow Leopard
http://www.apple.com/support/lion/installrecovery/
Create an OS X Lion Install disc
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
Yes I strongly recommend making a clone you can boot from in addition to use TimeMachine.
Carbon Copy Cloner will also offer to copy and make a Recovery partition on the 2nd drive.
Maybe you are looking for
-
I'm working on a single server SharePoint 2013 Enterprise Server. The search service application was provisioned successfully. When I attempt to run a crawl on my content source, I'm receiving a few thousand instances of the following error in the cr
-
Why iPods don't have the ability to rename apps I downloaded? I want such a function!
Please Apple, enable a function to rename apps which were downloaded
-
How do I get a burned DVD (the only copy) back into Final Cut to re-edit?
The project is long over, the files gone. What do I need to do to re-import this into Final Cut, or even i-Movie to do some other editing?
-
I recently bought a used G5, which seems to be working fine, with 1 small issue. Any advice on this appreciated.... When I bring it back from sleep mode, the screen appears as usual. When I click anything with the mouse, nothing happens for about 2 m
-
Hi! I'm using a Macbook Pro, and my photo booth stopped working! I just updated my software yesterday, but it still doesn't work!! The green light does go on though, any suggestions on how to make it work?