Macbook Pro Model 5,4 Removable Disk Eject Problems.

After the update to 10.6.8 the only way I am able to eject any removable drive is to open Disk Utility and hit eject in the action bar. Even the option for ejecting is gone from the right click menu for all removable drives. Also dragging the drive to the trash does nothing.

Try downloading the Mac OS X 10.6.8 Update Combo. First do this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Now reinstall with the combo updater.

Similar Messages

The disk image "Name Macbook Pro.sparsebundle" is in use Try ejecting the disk image

I upgraded my Mountain Lion two weeks ago and I've experienced number of issues since then.
Now I have problem with the Time Machine.
When I try to create backup I'm keep getting following message:
"The disk image "MyName Macbook Pro.sparsebundle" is in use
Try ejecting the disk image"
The problem is that Time Machine seem to be ejected, I checked this both in Finder and Disk Utility.
Please could you possibly help me with the issue?
I work on 2010 Macbook Pro

Try the following:
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in to the back of the Time Capsule
Wait a few minutes, then try another backup

I would like to upgrade my Macbook Pro Model A1278.

Hi,
I would like to upgrade RAM and hard drive memory on my Macbook Pro Model A1278, but I'm not sure what is the maximum RAM I can install and what is the maximum hard drive memory I can install if its even doable. Also, which are the parts I should buy to upgrade the RAM and hard drive memory (if its doable).
Currently my macbook runs a 2.26GHz Intel Core 2 Duo processor; 3 MB shared level 2 cache, 2GB of 1066MHz DDR3 SDRAM, 160GB 5400-rpm hard drive, its a 13'' laptop, NVIDIA GeForce 9400M graphics processor with 256MB of DDR3 SDRAM shared with main memory, it currently has MAC OS X version 10.6.8.
Thanks for the help in advance!

Maximum Memory
8.0 GB
Memory Slots
2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM
The largest hard drive you can install is a 1.5 TB drive from Hitachi (HGST.)
You can find memory at OWC, DataMem, or Crucial.com. OWC also sells suitable hard drives, toolkits, and online tutorials.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Mid-2010 MacBook Pro, Model A1278

I am having 2 issues:
- Lagging when opening applications
The dock animations are lagged. Occasionally I will get a lag if I open both Firefox and Safari. My cursor will lag but I won't get a "beach ball/pinwheel."
- Brightness of screen will change on it's own
The brightness of my screen will change on it's own-- I have yet to relate it to anything I am doing. This happens when I am running on battery and when I am using the power cord. I haven't found any solutions on this forum.
Here are my specs from the system profiler:
Model Name: MacBook Pro
Model Identifier: MacBookPro7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP71.0039.B05
SMC Version (system): 1.62f6
Hardware UUID: 230F65B5-494B-568C-9DD5-4270A1B05964
Sudden Motion Sensor:
State: Enabled
System Version: Mac OS X 10.6.4 (10F569)
Kernel Version: Darwin 10.4.0
Boot Volume: Macintosh HD
Boot Mode: Normal
Secure Virtual Memory: Enabled
64-bit Kernel and Extensions: No
Time since boot: 38 minutes

Alright, I have gone in to the Genius Bar TWICE now. The first time, they blamed it on the RAM and replaced it. Then they blamed it on my case so I took it off. The second time, they couldn't find anything wrong with it so they told me to re-install Snow Leopard.
I had to call Apple to get a replacement disk to re-install my OS, HOWEVER, I can't do it. I want to throw my macbook against the wall at this point. Can anybody help me by looking at the attached screenshot?
I don't understand how I can go from my iBook (which is still kicking and running just fine) to this Macbook Pro that is more trouble than not.
Click to Enlarge
Message was edited by: mzjean

My macbook pro model mid 2009 is running slow. free memory is 35 mbs and inactive memory is 1.36 gb with a total of 5 gb RAM memory

Problem description:
too much inactive memory 1.87 gb and free memory only 35 mb
EtreCheck version: 2.1.1 (104)
Report generated 10 December 2014 3:30:26 pm IST
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2-core
5 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 4:42:54
Disk Information: ℹ️
WDC WD5000LPVT-80G33T2 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
[redacted] (disk0s2) / : 499.25 GB (142.01 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.driver.KUSBModemCDC07 (4.0.2) [Support]
[not loaded] com.driver.KUSBModemDataA07 (4.0.2) [Support]
Startup Items: ℹ️
JHHPortDetect: Path: /Library/StartupItems/JHHPortDetect
Sudochmod: Path: /Library/StartupItems/Sudochmod
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[running] com.bjango.istatmenusagent.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] jp.co.canon.CUPSCAPT.BG.plist [Support]
[loaded] org.macosforge.xquartz.startx.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[invalid?] com.adobe.SwitchBoard.plist [Support]
[running] com.bjango.istatmenusdaemon.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Support]
[loaded] org.tcpdump.chmod_bpf.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Caffeine Application (/Applications/Caffeine.app)
AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Dropbox Application (/Applications/Dropbox.app)
HyperDock Helper UNKNOWN (missing value)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
SharePointBrowserPlugin: Version: 14.0.0 [Support]
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
zako: Version: zako 1.0.0.0 - SDK 10.8 [Support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User internet Plug-ins: ℹ️
BlueStacks Install Detector: Version: Unknown
Safari Extensions: ℹ️
AdBlock
ClickToFlash
Awesome Screenshot
Breaking News
The New York Times
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Arupreet: Disk size: 499.25 GB Disk used: 357.24 GB
Destinations:
CHIKKI [Local]
Total size: 331.41 GB
Total number of backups: 2
Oldest backup: 2014-06-10 13:36:00 +0000
Last backup: 2014-09-08 13:57:40 +0000
Size of backup disk: Too small
Backup size 331.41 GB < (Disk used 357.24 GB X 3)
Top Processes by CPU: ℹ️
      8% python
      3% WindowServer
      3% uTorrent
      2% SystemUIServer
      0% mtmfs
Top Processes by Memory: ℹ️
1.29 GB JavaAppLauncher
123 MB SystemUIServer
102 MB iStatMenusDaemon
86 MB com.apple.WebKit.WebContent
81 MB WindowServer
Virtual Memory Information: ℹ️
50 MB Free RAM
1.97 GB Active RAM
1.90 GB Inactive RAM
673 MB Wired RAM
6.70 GB Page-ins
8 MB Page-outs
Diagnostics Information: ℹ️
Dec 10, 2014, 10:48:11 AM Self test - passed
Dec 9, 2014, 02:54:15 AM VLC_2014-12-09-025415_Arus-MacBook-Pro.crash

Not sure if using Terminal would help:
Launch Activity Monitor
Select Memory tab
Launch Terminal
type sudo purge
password
10-15 sec later Terminal should refresh and show freed memory & cache

I am unable to copy files from my macbook pro to my external hard disk.

I am unable to copy files from my macbook pro to my external hard disk. I tried to copy a movie 800mb in size to my EDD and it shows the loading box and it says zero kb loaded out of 800mb and sometimes it loads a a few kb of the file, then after a while it ejects my hard disk and gives a message saying you should have ejected it properly. and it sometimes gives this message
"The Finder can’t complete the operation because some data in “....” can’t be read or written.
(Error code -36)".
This happens with a range of files if they are more than a few mb in size, so I am pretty sure its not the file problem. It also occurs sometimes when i try to copy from my EDD to my mac.
I have tried everything. I formatted my EDD to MS-DOS (FAT) format because i need to use it with mac and windows. I tried resetting The SMC and the PRAM and NVRAM. I tried verify and disk repair on disk utility. But the same thing happens over again and it is really frustrating. The problem doesnt happen with my PC.
My EDD is an Apollo 320GB hard drive from Imation.
Also are there any particular EDD brands that may not have this issue with MACs and can be used on mac and PC?
Thanks in advance!

Hey guys,
So this is follow up from my debarkle with the EDD. I found out my problem with copying files from Mac to EDD and vice versa was a result of a not so good EDD ( i had an apollo hard drive from imation) that was not very compatible with macs. So i did my research and found out that the best hard drives were Western Digital and Seagate. I bought the newest western digital EDD 1TB and formated it to FAT32 and guess what...no problems so far. The only problem is that FAT32 format doesn't copy files larger than about 4 gigs so i couldnt copy a movie from my brothers computer onto my EDD that was 1080p. You could probably resolve that by partitioning a small part of your hard drive in ExFAT? but yeah, hopefully that helped guys.
Aaisha

Why wont my brand new macbook pro boot to an external disk?

why wont my brand new macbook pro boot to an external disk? I have the 10.7.4 on both. The MBP came with it so I installed it onto the hard drive i have been using the same way with an older macbook pro but the new MBP does not see the startup disk. So i installed the same version of the os onto the MBP by hooking it up to my imac as a target disk because it would not recognize the install usb stick. Now the brand new MBP doesnt start up

I had the same issue. The 2012 macbook pro has a different 10.7.4 build that is not yet available for public release. It won't boot no matter how much you try. You need to wait for Mountain Lion and create a start up disk from ML. Apple most likely will release a 10.7.4 update for the 2012 models, but they are focused on ML now.

MacBook Pro late 2010 overheats and disk gets full

Using my MacBook Pro (model 6,2 or late 2010) just with Safari, or chrome and Mail, It gets fans spin a lot the speed decreases and I get a window telling me that there is no more space left for memory usage, but I have 20 GB hard disk free. If i check, I have only 400 mb free. I restart and the hard disk space again is 20 GB free and fans stop spinning a lot.

If you are on the record with a case number, you are more than likely to be taken care of out of warranty.
Genius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

Macbook pro (model number a1226) no power

I have a Macbook Pro (model number A1226) - the computer has been working perfectly. However, I let the battery drain and since then, the laptop will not power up. I have tried everything:
Using two different power cords
Plugging the power cord(s) into different outlets - even in different rooms
Pressing CTRL + Command + Power
Pressing Option + Command + Power
Taking out the battery, unplugging the mag power cord, pressing the Power Button for 10 seconds... plugging back in mag power cord... trying to start it.
Nothing on all of the above. Someone please help. There was absolutely nothing wrong with the computer and it has not moved an inch since the power went out!
I appreciate it.
Stephanie.

stephaniefrommckinney wrote:
There has been no storms here. So we're safe there.
Something new has happened though - the power indicator has now changed to amber and the battery pack that you can remove is now flashing green (there are 5 indicator lights on the battery and the first one is now flashing).
Is that a good sign?
That is a very good sign. It means the battery is charging, and I suspect at this point you should be able to boot the MBP (leave it plugged in until the amber turns green).

What is the correct part number for dvi to vga adapter for macbook pro model A1260

Can someone tell me the Apple part number for the DVI to VGA adapter that came with a Macbook Pro model A1260? (Early 2008)
My adapter has reached the end of useful life.
Thanks!

You have a MacBook Pro 15" Early 2009 (MacBook Pro 4,1)
The Mac's port is a Dual-link DVI (VGA, Composite and S-video with adapter)
The DVI connector connects to the Dual link-DVI port,thus you need a DVI to VGA adapter.
http://eshop.macsales.com/item/Micro%20Accessories/DVIVGA/
You also can search the Apple store online for the part, but it's so basic and simple that paying more for Apple's version is just for looks.

I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4. Question 1: Does this model have a PCI Express slot? Question 2: Can I upgrade my USB2 port in this laptop to a USB3 port? Appreciate your help & advice..

I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4.
Question 1: Does this model have a PCI Express slot?
Question 2: Can I upgrade my USB2 port in this laptop to a USB3 port?
Appreciate your help & advice..

No & no.

What is the problem with 15-inch Macbook Pro model 2011 after connecting to TV with HDMI chord?

Today we connected a 15-inch Macbook Pro model 2011 with HDMI chord to an Insigna Television. We plugged and unplugged couple of times. But recently the macbook pro is having technical issues. The following symptoms are:
1. Macbook pro turns on and off
2. The screen stays blue and keeps loading but does not load to the desktop so you can't access to anywhere
3. The screen sometimes becomes fuzzy and the apple logo that shows before it loads to the desktop is fuzzy
4. Sometimes fuzzy lines appear on the screen like you see on television when there's a bad signal
5. The screen stays blue
6. Sometimes little specks appear on the screen
Only thing we did was turn it off and restart but it still leads to the same symptoms above.
Does anyone have any clue what caused this problem? I am guessing it is due to the connection to the HDMI chord, since we didn't turn the macbook on and off when we plugged it, rather we just unplugged and plugged the chord while the macbook is running.
Another theory might be watching movies from an online source but the first theory seems to make more sense.
We scheduled a meeting with the genius bar tomorrow but does anyone might have any clue? And also any ideas how to fix this? This is an emergency because there are important files on the macbook we didn't back up and we hope the files are safe and we need to use the macbook ASAP. Let us know anything that might have caused this and/or any solutions or help. That would be appreciated and thank you.

Hey there! Welcome to the Discrete GPU issue clube ... post your relate here >>> 2011 MacBook Pro and Discrete Graphics Card
And for GOD SAKE! Call Apple to tell them that you're another user with such problem ... that action can improve a future recall. BTW the fix price for your problem is around U$ 1000,00 ... that's the meaning of the recall attempt

I just sent the following in a drop down box that allowed reporting system problems:I am most unhappy with your Lion 10.7.3 operating system that I installed on this MacBook: Hardware Overview:    Model Name:     MacBook Pro   Model Identifier:     MacBo

I am most unhappy with your Lion 10.7.3 operating system that I installed on this MacBook:
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,4
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.53 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP53.00AC.B03
SMC Version (system):          1.49f2
Serial Number (system):          W8******7XJ
Hardware UUID: ******
Sudden Motion Sensor:
State:          Enabled
1. The scrolling, as far as I've been able to determine, is by using the slide bar to the right of most diplays. There are no up or down arrows that allow slow movement
2. The top and botton toolbars are not visible. The top one appears when you point the arrow to the top of the screen but the same doesn't work well if at all pointing the cursor to the bottom.
3. When downloading, something jumps to the upper right of the screen. I could point and click it and get a diplay if my downloads. I was attempting to fix some of the above. Now the little thing jumps off the screen and I can't get to it.
4I was trying to installMacBook Pro EFI Firmware Update 2.3. I got message it couldn't be installed on my system.
5. The red yellow and blue bullets that allow shutting down, minimizing and maximizing are missing on most open windows.
Can you do something about these problems
It's problematical that one can't communicate directly with Apple to resolve these problems
<Edited By Host>

1: I'm scrolling this page right now using the arrow keys.
2: Press the escape (esc) key to exit full-screen mode. Select Apple menu > Dock > Turn Hiding Off.
3: ???
4: That's because you downloaded an update for another model.
5: See 2.

Please help! Itunes fails to open on my macbook pro. I have remove itunes and reinstalled it and it still will not work!, Please help! Itunes fails to open on my macbook pro. I have remove itunes and reinstalled it and it still will not work!

Please help! Itunes fails to open on my macbook pro. I have removed itunes and reinstalled it and it still will not work!

Try removing the Genius database. In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.

TS1381 My left arrow does not work on my macbook pro(model A1226). I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, test all other keys with keyboard view (all others work) - HELP!!

My left arrow does not work on my macbook pro(model A1226).
I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, & tested all other keys with "keyboard viewer" (all other keys work except for the arrow).
In addition, I have gone thru all the recommended checks with universal access and have booted from snow leopard dvd and the left arrow still does not work.
I have tried using the left arrow key in all of applications I use such as: excel, ms word, address book, calendar, iphoto, terminal, & highlighting an icon and using the arrows to move to another selected icon.
Here is the kicker! In addition, I purchased a logitech solar bluetooth keyboard and the arrows work fine with my ipad but do not work when paired with the macbook pro. All other keys work fine on the macbook pro using the bluetooth keyboard.
I believe this says that the problem is not in my macbook pro keyboard. So where can it be?
Can anyone think of any other rabbit holes I can search?
thanks and regards
vats3

I would also like to add that I've reverted the two cd drive and hard drive mods I did and the laptop is back to factory hardware and there is 0 corrosion or mold visible.

Macbook Pro Model 5,4 Removable Disk Eject Problems.

Similar Messages

Maybe you are looking for