MacBook Pro Model A1261 Osx v10.5.8 -- which OS can I upgrade to?

A friend of mine has asked me to upgrade her MacBook Pro A1261 which still has the original OSX 10.5.8 on it. What is my best bet for upgrading? Which OSX can I upgrade to and everything still work as expected? She'd like to put on the latest and greatest, but I'm not certain this model will work w/ the latest.
What is the best route to take?
Thanks,
Brian

Your friend's macbook might not work with Mountain Lion.....Check here to verify
Best to upgrade to SL and stick with that OS for a while until she upgrades her apps to the current version...
If she's not worried about her apps, then by all means, go ahead with the Lion upgrade.....But you need SL to get to Lion
Good luck
just checked your specs - early 08, if this is true, then you can upgrade to ML after you've upgraded to SL.....
http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-2-duo-2 .5-17-early-2008-penryn-specs.html

Similar Messages

Macbook pro snow leopard 10.6.8 with VMsoftware partition can i upgrade to Yosemite

I have a MacBook Pro laptop bought in 2010 using Snow Leopard 10.6.8. 4 GB of Memory and 2.66GHZintel core i7. I have also partitioned the drive with VMware to use a windows application. If I have backed up all personal photos documents, music, movies etc and I don't mind if I lose all the info in the partition VMware, is it ok to
update to Yosemite. Is there anything special I need to do, like uninstall the VMware first? Also do I need more than 8GB on my hard drive?
Any one done anything similar and if so were there any issues?
thanks for any help,
musemhp

VirusBarrier needs to be uninstalled using the original installer. That installer will have a button that allows you to uninstall the software. If you no longer have the original installer, you will need to re-download it.
BitDefender must be removed using the uninstaller provided by the developer. That uninstaller is found on the .dmg file that also contained the original installer. If you no longer have that, you will need to re-download it.
Do not try to locate and remove these items manually! They must be removed using the uninstaller!
Note that it's a bad idea to have two anti-virus programs like these installed and active at the same time. That can easily cause all manner of problems, including serious performance problems. For more information about protecting yourself against malware, see my Mac Malware Guide.
You also have SpeedIt installed, which is a badly outdated program that has been discontinued. The developer is no longer in business. I would be surprised if it wasn't causing problems. Unfortunately, because it is so old and the developer's site is gone, I cannot find any uninstaller or uninstallation instructions. See if you have a SpeedIt uninstaller somewhere. If you still have the SpeedIt installer somewhere, that may include the uninstaller.
If removing those programs doesn't fix the problem, the only other third-party kernel extensions you have installed are:
com.markspace.driver.Android.RNDIS 1.2
com.roxio.BluRaySupport 1.1.6
You'll need to remove those using the uninstaller provided by the developers (markspace.com and roxio.com).

Hi, I have a macbook pro 17" GHz intel Core i7 Memory 4GB. Can I upgrade up to 16GB or it goes up to 8GB only?

I want to buy it on amazon and I heard I need the Crucial 8gb 1333 mhz ddr3, I just want to know if I can make it up to 16? is it going to work properly?
Thank you

I have a late 2011 17" MBP with 16 GB Crucial RAM. No problems since installation 9 months ago.
SakMich wrote:
What's the problem if they don't certify it?
None.
Ciao.

I have a MacBook Pro 5,5 2.26 Ghz 2GB memory . Can I run OSX 10.7 . I am on 10.6.8 and am told software is up to date?

I would like to be able to run OSX 7 on my wife's MacBook Pro , as I have a new printer which required OSX7 or above.
Her Macbook Pro is Model MacBook Pro 5,5 2,26GHz speed and 2GB memory.
When I look for software updates I get the message that software is up to date.
Is it possible to run OSX7 on this Macbook Pro , and if so , how do I get it.
Many thanks , Sam

Open the Mac App Store and download Yosemite, or if you don't want to upgrade all the way immediately, click here and order a download code for Lion 10.7; codes for Mountain Lion are also available.
Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(116492)

What is the correct part number for dvi to vga adapter for macbook pro model A1260

Can someone tell me the Apple part number for the DVI to VGA adapter that came with a Macbook Pro model A1260? (Early 2008)
My adapter has reached the end of useful life.
Thanks!

You have a MacBook Pro 15" Early 2009 (MacBook Pro 4,1)
The Mac's port is a Dual-link DVI (VGA, Composite and S-video with adapter)
The DVI connector connects to the Dual link-DVI port,thus you need a DVI to VGA adapter.
http://eshop.macsales.com/item/Micro%20Accessories/DVIVGA/
You also can search the Apple store online for the part, but it's so basic and simple that paying more for Apple's version is just for looks.

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds.

I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto '09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn't need it). I am totally happy with the

I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?

Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT

I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4. Question 1: Does this model have a PCI Express slot? Question 2: Can I upgrade my USB2 port in this laptop to a USB3 port? Appreciate your help & advice..

I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4.
Question 1: Does this model have a PCI Express slot?
Question 2: Can I upgrade my USB2 port in this laptop to a USB3 port?
Appreciate your help & advice..

No & no.

Mid-2010 MacBook Pro, Model A1278

I am having 2 issues:
- Lagging when opening applications
The dock animations are lagged. Occasionally I will get a lag if I open both Firefox and Safari. My cursor will lag but I won't get a "beach ball/pinwheel."
- Brightness of screen will change on it's own
The brightness of my screen will change on it's own-- I have yet to relate it to anything I am doing. This happens when I am running on battery and when I am using the power cord. I haven't found any solutions on this forum.
Here are my specs from the system profiler:
Model Name: MacBook Pro
Model Identifier: MacBookPro7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP71.0039.B05
SMC Version (system): 1.62f6
Hardware UUID: 230F65B5-494B-568C-9DD5-4270A1B05964
Sudden Motion Sensor:
State: Enabled
System Version: Mac OS X 10.6.4 (10F569)
Kernel Version: Darwin 10.4.0
Boot Volume: Macintosh HD
Boot Mode: Normal
Secure Virtual Memory: Enabled
64-bit Kernel and Extensions: No
Time since boot: 38 minutes

Alright, I have gone in to the Genius Bar TWICE now. The first time, they blamed it on the RAM and replaced it. Then they blamed it on my case so I took it off. The second time, they couldn't find anything wrong with it so they told me to re-install Snow Leopard.
I had to call Apple to get a replacement disk to re-install my OS, HOWEVER, I can't do it. I want to throw my macbook against the wall at this point. Can anybody help me by looking at the attached screenshot?
I don't understand how I can go from my iBook (which is still kicking and running just fine) to this Macbook Pro that is more trouble than not.
Click to Enlarge
Message was edited by: mzjean

My macbook pro model mid 2009 is running slow. free memory is 35 mbs and inactive memory is 1.36 gb with a total of 5 gb RAM memory

Problem description:
too much inactive memory 1.87 gb and free memory only 35 mb
EtreCheck version: 2.1.1 (104)
Report generated 10 December 2014 3:30:26 pm IST
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2-core
5 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 4:42:54
Disk Information: ℹ️
WDC WD5000LPVT-80G33T2 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
[redacted] (disk0s2) / : 499.25 GB (142.01 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.driver.KUSBModemCDC07 (4.0.2) [Support]
[not loaded] com.driver.KUSBModemDataA07 (4.0.2) [Support]
Startup Items: ℹ️
JHHPortDetect: Path: /Library/StartupItems/JHHPortDetect
Sudochmod: Path: /Library/StartupItems/Sudochmod
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[running] com.bjango.istatmenusagent.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] jp.co.canon.CUPSCAPT.BG.plist [Support]
[loaded] org.macosforge.xquartz.startx.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[invalid?] com.adobe.SwitchBoard.plist [Support]
[running] com.bjango.istatmenusdaemon.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Support]
[loaded] org.tcpdump.chmod_bpf.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Caffeine Application (/Applications/Caffeine.app)
AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Dropbox Application (/Applications/Dropbox.app)
HyperDock Helper UNKNOWN (missing value)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
SharePointBrowserPlugin: Version: 14.0.0 [Support]
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
zako: Version: zako 1.0.0.0 - SDK 10.8 [Support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User internet Plug-ins: ℹ️
BlueStacks Install Detector: Version: Unknown
Safari Extensions: ℹ️
AdBlock
ClickToFlash
Awesome Screenshot
Breaking News
The New York Times
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Arupreet: Disk size: 499.25 GB Disk used: 357.24 GB
Destinations:
CHIKKI [Local]
Total size: 331.41 GB
Total number of backups: 2
Oldest backup: 2014-06-10 13:36:00 +0000
Last backup: 2014-09-08 13:57:40 +0000
Size of backup disk: Too small
Backup size 331.41 GB < (Disk used 357.24 GB X 3)
Top Processes by CPU: ℹ️
      8% python
      3% WindowServer
      3% uTorrent
      2% SystemUIServer
      0% mtmfs
Top Processes by Memory: ℹ️
1.29 GB JavaAppLauncher
123 MB SystemUIServer
102 MB iStatMenusDaemon
86 MB com.apple.WebKit.WebContent
81 MB WindowServer
Virtual Memory Information: ℹ️
50 MB Free RAM
1.97 GB Active RAM
1.90 GB Inactive RAM
673 MB Wired RAM
6.70 GB Page-ins
8 MB Page-outs
Diagnostics Information: ℹ️
Dec 10, 2014, 10:48:11 AM Self test - passed
Dec 9, 2014, 02:54:15 AM VLC_2014-12-09-025415_Arus-MacBook-Pro.crash

Not sure if using Terminal would help:
Launch Activity Monitor
Select Memory tab
Launch Terminal
type sudo purge
password
10-15 sec later Terminal should refresh and show freed memory & cache

What is the problem with 15-inch Macbook Pro model 2011 after connecting to TV with HDMI chord?

Today we connected a 15-inch Macbook Pro model 2011 with HDMI chord to an Insigna Television. We plugged and unplugged couple of times. But recently the macbook pro is having technical issues. The following symptoms are:
1. Macbook pro turns on and off
2. The screen stays blue and keeps loading but does not load to the desktop so you can't access to anywhere
3. The screen sometimes becomes fuzzy and the apple logo that shows before it loads to the desktop is fuzzy
4. Sometimes fuzzy lines appear on the screen like you see on television when there's a bad signal
5. The screen stays blue
6. Sometimes little specks appear on the screen
Only thing we did was turn it off and restart but it still leads to the same symptoms above.
Does anyone have any clue what caused this problem? I am guessing it is due to the connection to the HDMI chord, since we didn't turn the macbook on and off when we plugged it, rather we just unplugged and plugged the chord while the macbook is running.
Another theory might be watching movies from an online source but the first theory seems to make more sense.
We scheduled a meeting with the genius bar tomorrow but does anyone might have any clue? And also any ideas how to fix this? This is an emergency because there are important files on the macbook we didn't back up and we hope the files are safe and we need to use the macbook ASAP. Let us know anything that might have caused this and/or any solutions or help. That would be appreciated and thank you.

Hey there! Welcome to the Discrete GPU issue clube ... post your relate here >>> 2011 MacBook Pro and Discrete Graphics Card
And for GOD SAKE! Call Apple to tell them that you're another user with such problem ... that action can improve a future recall. BTW the fix price for your problem is around U$ 1000,00 ... that's the meaning of the recall attempt

I just sent the following in a drop down box that allowed reporting system problems:I am most unhappy with your Lion 10.7.3 operating system that I installed on this MacBook: Hardware Overview:    Model Name:     MacBook Pro   Model Identifier:     MacBo

I am most unhappy with your Lion 10.7.3 operating system that I installed on this MacBook:
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,4
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.53 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP53.00AC.B03
SMC Version (system):          1.49f2
Serial Number (system):          W8******7XJ
Hardware UUID: ******
Sudden Motion Sensor:
State:          Enabled
1. The scrolling, as far as I've been able to determine, is by using the slide bar to the right of most diplays. There are no up or down arrows that allow slow movement
2. The top and botton toolbars are not visible. The top one appears when you point the arrow to the top of the screen but the same doesn't work well if at all pointing the cursor to the bottom.
3. When downloading, something jumps to the upper right of the screen. I could point and click it and get a diplay if my downloads. I was attempting to fix some of the above. Now the little thing jumps off the screen and I can't get to it.
4I was trying to installMacBook Pro EFI Firmware Update 2.3. I got message it couldn't be installed on my system.
5. The red yellow and blue bullets that allow shutting down, minimizing and maximizing are missing on most open windows.
Can you do something about these problems
It's problematical that one can't communicate directly with Apple to resolve these problems
<Edited By Host>

1: I'm scrolling this page right now using the arrow keys.
2: Press the escape (esc) key to exit full-screen mode. Select Apple menu > Dock > Turn Hiding Off.
3: ???
4: That's because you downloaded an update for another model.
5: See 2.

TS1381 My left arrow does not work on my macbook pro(model A1226). I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, test all other keys with keyboard view (all others work) - HELP!!

My left arrow does not work on my macbook pro(model A1226).
I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, & tested all other keys with "keyboard viewer" (all other keys work except for the arrow).
In addition, I have gone thru all the recommended checks with universal access and have booted from snow leopard dvd and the left arrow still does not work.
I have tried using the left arrow key in all of applications I use such as: excel, ms word, address book, calendar, iphoto, terminal, & highlighting an icon and using the arrows to move to another selected icon.
Here is the kicker! In addition, I purchased a logitech solar bluetooth keyboard and the arrows work fine with my ipad but do not work when paired with the macbook pro. All other keys work fine on the macbook pro using the bluetooth keyboard.
I believe this says that the problem is not in my macbook pro keyboard. So where can it be?
Can anyone think of any other rabbit holes I can search?
thanks and regards
vats3

I would also like to add that I've reverted the two cd drive and hard drive mods I did and the laptop is back to factory hardware and there is 0 corrosion or mold visible.

How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion? I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8)

How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion? I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8) since November until now. Mail will no longer download on the MacBook Pro and keeps asking for my password.

Mail should still be usable with your machine - but you'll need to update the settings to conform to the requirements of your system. Check with your ISP (like ATT, etc.) for the settings that will work with your Mail. Once you've updated this, you should be able to email like before.
For example, my ISP required that I go to Mail Preferences/Accounts and make sure the details conform to your email settings.
I have no idea of what your ISP is or what the settings might be, but this is likely the source of the problem.

Need a printer driver for a PIXMA MG2900 that will work on my MacBook Pro Operating System OSX 10.4.11

I have just purchased a Canon Pixma MG2900 printer and need to find a driver for this printer that will work with my MacBook Pro Operating System OSX Version 10.4.11.
I was directed to iTunes PIXMA/MAXI, but it didn't seem to download for me. It did say that it was for IPads or IPhones, not sure that it's intended for use on a computer.

Probably best to go to a library and submit your resume there.
You can make many web browsers claim to be ie. Here is how.
TenFourFox -- It's a port of the latest FireFox to run on older hardware and software.
"World's most advanced web browser. Finely tuned for the Power PC."
-- works for me on 10.4. Supports 10.5
http://www.floodgap.com/software/tenfourfox/
alternative download site:
http://www.macupdate.com/app/mac/37761/tenfourfox
OmniWeb uses the lastest Safari framework. The open source WebKit. Other browsers like Safari and iCab use the OS version of WebKit. The OmniWeb downloaded dmg includes it's own copy of the latest WebKit.
http://www.omnigroup.com/products/omniweb/
Safari 4.1.3 for Tiger
http://support.apple.com/kb/DL1069
iCab - The Taxi for the Internet
http://www.icab.de/
What is my user agent?
http://whatsmyuseragent.com/
You want to change your user agent to be ie.
in tenfourfox
tools > add-ons
seearch for change user agent
install
user agent switcher
tools > User agent switcher
change to ie.

MacBook Pro Model A1261 Osx v10.5.8 -- which OS can I upgrade to?

Similar Messages

Maybe you are looking for