Macbook pro ne démarre plus

bonjour j'ai un macbook 15 " de 2009 duo core 2,66 il y a vait des défaillance l'écrans ce figeait avec des rayure de pixelles en bas de l'écran et un bruit régulier je devais le redémarré et ca aller. l'autre jour je l'ai laissé 3 ou 4 h et suis sortie en rentrant l'écran figé. depuis quand je l'allume il affiche la pomme la roue tourne un slider horizontal met environ 5 minutes a ce remplir les ventilateur tourne de plus en plus vite le disque aussi et quand le slider est complétement remplis tout s'étend. le dd fonction l'écran aussi reste la carte mére et la carte graphique..... merci de votre aide. gyom

À toutes fins utiles, essaie de booter en recovery mode (ou sur le dvd d'install, suivant la version de mac os), et de tester / réparer ton disque dur.
J'ai bien peur qu'il n'y ait d'autre solution que le SAV (p. ex. échange std de carte mère).
Mais le coût est-il justifié pour un Mac de 2009 ?

Similar Messages

  • Mon macbook pro ne démarre plus

    mon macbook pro ne démarre plus, il s'allume et l'écran affiche une page blanche avec un cercle.

    That often is a sign that there are problems with the hard disk drive or the connection to the hard disk drive.
    Look at possible approaches to solving the problem here:
    https://discussions.apple.com/docs/DOC-5282
    Ciao.

  • Printing from Macbook Pro to HP Photosmart Plus B210a

    Hi,
    I am experiencing difficulty in printing documents from Macbook Pro to HP Photosmart Plus B210a. This has only been a problem for the last 2 weeks.
    I think this may be due the most recent update of OS X Mavericks 10.9.3.
    I have tried to update printer drivers from HP web, and it indicates that the printer in connected to my network router, and I have been able to run a testprint to the printer.
    However when I try to print any documents the print queue seems to be trying to print, but never actually generates an output document.
    I am looking for any advice/guidance on how to solve this printing problem.

    Hi Eric,
    i note that 10.9.4 is Mavericks.I cannot link directly as it is a wireless printer.
    I have tried using the Terminal app, and typed the command as you indicated and i got the response attached.
    IAIN-HERCUSs-MacBook-Pro:~ iain1$ ping 192.168.1.69
    PING 192.168.1.69 (192.168.1.69): 56 data bytes
    64 bytes from 192.168.1.69: icmp_seq=0 ttl=255 time=6.941 ms
    64 bytes from 192.168.1.69: icmp_seq=1 ttl=255 time=5.657 ms
    64 bytes from 192.168.1.69: icmp_seq=2 ttl=255 time=3.769 ms
    64 bytes from 192.168.1.69: icmp_seq=3 ttl=255 time=4.136 ms
    64 bytes from 192.168.1.69: icmp_seq=4 ttl=255 time=4.226 ms
    64 bytes from 192.168.1.69: icmp_seq=5 ttl=255 time=4.219 ms
    64 bytes from 192.168.1.69: icmp_seq=6 ttl=255 time=4.699 ms
    64 bytes from 192.168.1.69: icmp_seq=7 ttl=255 time=6.325 ms
    64 bytes from 192.168.1.69: icmp_seq=8 ttl=255 time=4.570 ms
    64 bytes from 192.168.1.69: icmp_seq=9 ttl=255 time=4.493 ms
    I found that had to break this process. i don't know what this tells you with regard to the status of the printer connection.
    Please let me know what I should do next?
    IDH1

  • Mon Macboock Pro ne démarre plus... il démarre et s'arrête brutalement. Avez vous une solution ? Merci

    Mon Macboock Pro ne démarre plus... il démarre et s'arrête brutalement. Avez vous une solution ? Merci

    I am sorry, but there is not a French version:
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • Can not connect Macbook Pro to IPhone 6 Plus via bluetooth.

    I have a MacBook pro late 2011 with Yosemite 10.10.1 and bluetooth ver. 2.1 EDR. I can not connect my IPhone 6 Plus Ver. 8.1 via bluetooth.  I can see the the iPhone 6 on my MacBook and MacBook on IPhone 6, and can select connect but the iPhone 6 has error message MacBook Pro is not supported.  I am guessing that the issue is with the bluetooth versions, but not sure.  Any idea would be greatly appreciated.

    And what is it you want to accomplish?   iPhones cannot pair with Computers  (Mac or Pc). 
    If you want to use features such as Continuity, or Handoff, pairing is not necessary.  However you would need a newer MacBook for those features. 
    iPhones can pair with speakers, keyboards, headsets, hands free devices, in car media centers etc...
    But there's no profile for connecting to a computer directly.

  • MacBook Pro not recognizing MagicJack Plus

    I conncected the MagicJack Plus into my macbook pro and successfully registered my product. I went through all the steps and received my phone number. After that it all went downhill.
    I disconnected the magicjack and connected it to my router. That wasn't working so I connected it back to my pro and boom. It didn't recognize it and nothing would pop up like it should. I followed all the steps in removing the software and anything related to MagicJack and it still does not work. My phone number and account are activited. The blue light turns one and everything seems to work fine. I don't know what it is.
    Im running OS X Mavericks
    Just wondering if anyone has had similar problems and any fixes.
    - Thanks

    See this entry:
    https://discussions.apple.com/thread/4156171?start=0&tstart=0
    This addresses my problem.

  • How to move photos from macbook pro to iPhone 6 plus

    I am noticing that my brand new iPhone 6 did not load pics from the cloud so want to transfer photos manually from macbook pro onto the new iPhone 6 plus could you direct me how to.thanks Gerald

    Are your photos housed in the iPhoto app on the Mac? If so, then hook up your device, click on the Photos tab in the Device Profile Screens to the right, select what photos you want sync'd, and then sync your device to iTunes.
    Cheers,
    GB

  • Mon macbook pro ne s'alume plus, mon macbook pro ne s'alume plus

    bonjour a la fin de mon cours j'ai etteint mon macbook pro 13 pouce et quand je suis rentrer chez moi j'ai essayer de l'allumer et helas il ne s'allume plus et pourtant il n'etait pas dechargé a plat , même quand je branche le chargeur la lumiere verte n'est plus aussi intense elle est tres faible et tanto elle est orange mais tres faible aussi aidez moi !

    Vous pouvez essayer une réinitialisation SMC:
    http://support.apple.com/kb/HT3964?viewlocale=fr_FR
    Assurez-vous également n'ya pas de saleté ou de débris dans le connecteur du câble et du port.
    Utilisez un cure-dent en bois et appuyez vers le bas sur les broches sur la fin de l'ordinateur du câble, ils sont à ressort et parfois coincés.
    Parfois, le port d'entrée peut passer hors de l'alignement, ou il ya un problème avec un autre composant
    Si cela ne résout pas le porter pour un fournisseur de services agréé Apple
    Espérons que cette aide

  • Mon macbook 2008 ne démarre plus

    Bonjour,
    aujourd'hui, impossible de démarré mon macbook blanc de 2008. Il affiche un écran blanc et au tentatives de commandes (cmd+c /cmd+s :etc ...), l'ecran reste blanc puis au bout de quelques minutes, il affiche un dossier avec un point d'interrogation (?) qui clignote . De plus , lors de la commande alt au démarrage, rien ne s'affiche après avoir entré le mot de passe .
    J'aimerais savoir si il est possible de le réparer sans faire appelle a un spécialiste si oui , comment ? Et si non combien cela pourrais couter ?
    Merci de me répondre au plus vite .
    William LANDRAIN

    Bonjour,
    Once the problem is solved, update your MacBook to 10.7.5 via this update.
    http://support.apple.com/kb/dl1582

  • Des français sur les forums ? Pb avec mon MacBook Pro qui redémarre seul.

    J'ai un gros problème avec mon Mac Book Pro depuis que je suis passé à 10.8. L'ordi s'éteint tout seul, plusieurs fois par jour, il redémarre seul en fait, je dois réécrire mon mdp, ensuite je retrouve le bureau et les docs quasiment où j'en été resté... J'ai installé Mavevixs et le problème reste le même... C'est assez embêtant à la longue...
    Merci

    Allo Gautier,
    Il faut formatter le HDD comme "mac OS Extended (journalled)" avec le logiciel "Disk Utility".
    Après je propose de mettre le Librarie de iTunes sur le HDD, et aussi autre Libraries (iPhoto, Lightroom, Calibre, Virtual machines, etc).
    Laissez OSX et les Logiciels sur le SSD.
    N'oubliez pas de faire des backups sur un disk externe !, aussi pour TM.
    Lex

  • Connection from MacBook Pro to HP 8600 Plus keeps failing.

    The HP 8600 Printer's connection to my Mac PowerBook continues to fail.
    Please send instructions to maintain proper connection that operates fully without breakdowns.

    Hi,
    Follow the steps in the link below :
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c03781399&tmp_task=solveCategory&cc=us&dlc=en&la​...
    I work for HP but my posts and replies are my own.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • Probleme Demarrage Macbook Pro

    Macbook Pro ne démarrant pas, sauf un appui sur le bouton de démarrage maintenu jusqu'à l'apparition de l'écran gris -> hyper ventilation constante à 6K rpm / <40°c 
    processeur inactif >96%, mémoire système >2go disponible
    batterie à pleine charge
    check up fait avec Onyx ok; réglage de la luminosité automatique ok
    changement de la carte mère au Genius Bar du Carré Sénart (91,France) en Decembre 2013
    informations sur le Macbook Pro:
    Mac OSX Lion 10.7.5 (11G63b)
    SMC (système) 1.27f3
    ROM de démarrage: MBP41.OOC1.BO3
    modèle: MacBook Pro 4.1

    i tell you that the machine don't want to start with mac os it start just with windows, and i don't have a time machine to restore to the backup

  • HT1529 Upgrade to 8GB RAM & an SSD OR purchase New MacBook Pro?

    I am looking at upgrading my older mid-2009 2,53 Mhz MacBook Pro to 8GB RAM PLUS a 240GB SSD for around $380. Is it worth doing this or biting the bullet and purchasing a new MBP...lots more expensive. I am not a professional graphics or photographer but have PS6 and LR5 installed and only 4GB RAM....very, very slow. I like doing photo editing etc. Any advice is very much appreciated. Thanks

    First I suggest that you go through this comprehensive trouble shooting document and see if you can optimize the performance of your MBP as is is currently configured.  The monetary outlay will be zero.
    https://discussions.apple.com/docs/DOC-3521
    If you look at the Crucial web site, you should be able to install 8GB RAM and a 240 GB SSD for $282. 
    http://www.crucial.com/store/listparts.aspx?model=MacBook Pro (15-inch%2C Mid 2009)&Cat=RAM
    Personally, I would install the RAM first and see if that makes a meaningful difference.  Install the SSD only as a last resort.  I have an antipathy towards SSDs based mainly on cost.  Others have different opinions.
    Also update your OS to 10.6.8. 
    Do not be seduced by quad core CPUs.  They will perform faster only if the application is designed to take advantage of all cores.  Most applications are not (at least the older ones).
    Ciao.

  • Macbook or macbook pro. help trying to buy one

    do I go with a macbook + lcd display, or do I go with a macbook pro. I'm not much of a gamer . I just want a laptop I can use to do basic stuff + school work. I want a computer not heavy enough to carry around. which one should I purchase?

    Hi herme2020, see the threads at:
    http://discussions.apple.com/message.jspa?messageID=10689762
    http://discussions.apple.com/message.jspa?messageID=10684308
    In your case it is worth noting that the MacBook Pro 13" is a little lighter, thinner and tougher than the polycarbonate MacBook. If you are going to be carting it around to school etc the alum MacBook Pro certainly has some pluses.
    Cheers
    Rod

  • Mon MacBook Pro de 2008 ne démarre pas normalement. Hardware test : Alerte ! 4VDC/1/40000003: VideoController. Que dois-je faire ? Merci de votre aide...

    Mon MacBook Pro de 2008 ne démarre pas normalement. Hardware test : Alerte ! 4VDC/1/40000003: VideoController. Que dois-je faire ? Merci de votre aide...

    Je vous recommande de prendre votre MacBook Pro à un Centre de Services Agréé Apple le plus tôt possible avec une copie des résultats des tests de matériel d'Apple
    Très probablement, cela signifie que vous avez besoin d'une nouvelle carte mère.

Maybe you are looking for

  • When i use Adobe Premiere Elements 10, after about 10 minutes it stops working please help

    I recently purchesed Adobe premiere elemnts 10 and it installed correctly, and it loads up fine but once i start putting video together, it starts to mess up, the video i cant watch because its very slow and jumpy and then after a few minutes of me e

  • Problem with margins shifting when printing.

    I have an installation template on an 11x17 sheet with 3/8" margins. There is a "left" and "right" version on each side (basically mirrored) and the intent is that they align front to back when you hold the sheet up to the light. When we print a proo

  • Opening mailboxes in TextEdit?

    Hello I use to use OS 10.3. I now use OS 10.5. If I double click on a .mbox folder I get an error message saying "there is no default application to open the document xxx.mbox" I thought emails on OS 10.5 were stored in the mailbox folder on my hard

  • Dvorak and Chinese

    I wonder if anyone can help. I only have the use of one hand when typing. Because of this I learned to touch type with the Dvorak layout for the right hand, which I do very effectively in English. However now that I have to use Chinese on my mac I ha

  • Method :Want to Use Z-Table for Accessing Data

    Dear All,   I am new to BADI. I have implented one HR-PAYROLL Badi.   In this BADI I am having one method . I want to Use One Z-table for accessing data from   that table . Not able define the table in method.   Kindly tell me how to do it .   Thanki