MacBook Pro not booting to mac osx making partition on windows side and windows not booting either help
I have a macbook pro with windows 7 on bootcamp partition. I made a partition in windows 7 using disk mgmt and after that my computer wont show mac os partition and only show windows and when i boot to windows it errors out with blue screen unmountable volume. I was able to get in to command prompt of windows and use that command to boot to mac os but it failed giving error bootcamp.msi not found please any help in this issue will be appreciated.
Thanks
Highwaytohells wrote:
Hi,
I own a Macbook pro 13 inch since about 3 years and
snip
but there is no way for me to boot in the Mac OSX. Could anyone help me ?
It is broken, take it to the Apple Store for repair.
Similar Messages
-
MacBook Pro 15 Mid 2009 - Mac OSX 10.10.2 - Any issues with video lagging/audio lagging?
Hello
Current OS and System details below. Have started to experience audio and video lagging when browsing (not effecting audio on music)
Have looked at some forums and it appears to be an issue with some later cards and Mac Book Pros
Any one else experiencing issues? and if so are they resolved? and if so by what manner were they resolved?Since yo said "an issue with some later cards and Mac Book Pros" I would also post n the MacBook forum
MacBook Pro -
..
This worked amazingly!! Thanks for the post awvik360!
I was able to access the internal hard drive and perform a permissions fix through disk utility and re-apply the OS X 10.5.6 combo update on a totally debilitated machine (Mac Pro early 08).
Some clarification though:
{{ I used a MacBook Pro instead of USB/ExternalHD to run a working copy of OS X. }}
~ Just start up the healthy OS X (laptop) in target disk mode (hold 't' key while it powers up)
~ Connect it to the impaired Mac with the highest speed cable available (fire800>fire400>USB)
~ Start up the impaired Mac while holding the alt/option key to select the boot drive.
~ Select the connected OS X (laptop hard disk) and start er up.
~ Run disk utility and you can now use the Fix Permissions option on the impaired Mac's internal hard drive.
~ Run the OS X Combo Update (or presumably other offending update/program) and make sure to change the destination to the internal disk of the impaired Mac
~ Shut down, unplug target disk, start up, and you should be good to go.
I was in some kind of uber-kernel panic and could not start up in safe mode OR from the installation disc, and this worked! Definitely a good emergency procedure to have in your back pocket.
Note: ...target disk pairing must be in this direction. I tried setting up the impaired Mac as target and connecting it to running laptop, and it let me run the install fine, but it didn't fix the problem...must be something with permissions that the impaired Mac needs to install to itself, even if the OS is running on another disk/machine.
-T. -
this happens when the browser opens websites in tabs after a period of time, i dont know how the Hang occurs but FF4 is not secure enough for me, so i downgraded to FF3.6 just for stability.
this happens when the browser opens websites in tabs after a period of time, i dont know how the Hang occurs but FF4 is not secure enough for me, so i downgraded to FF3.6 just for stability.
-
Please help me, I have a mid 2010 Mac book pro with a toshiba mk3266gsxf harddrive. It started making a clicking noise and then my computer crashed. I proceeded to boot in safe mode, but it doesn't work. When I ran disk utility in recovery mode, it showed no problem with my disk. Does any one know what the problem is?
Sounds like a mechanical problem with the drive and it ruined the sectors where the Macintosh HD partition (and OS X, and files and programs) reside, but not your Recovery HD partition.
If you held command option r while booting, that's Internet Recovery and it's loaded via the Internet, not via the Recovery HD partition on the boot drive, so that could mean the drive is dead mechanically or there is another issue.
In either case the drive will likely have to be replaced, it's a matter of what occured to where and the drive state if you can recover data or not. If you made recent backups then your fine.
My computer is not working, is my personal data lost?
Most commonly used backup methods -
Macbook pro will not boot into Mac OSX
When i got my MacBook Pro it would boot into Mac OSX fine. Now it wont even give me the option and will only let me boot into Windows which i have running through bootcamp. I have tried reinstalling MacOSX but my OSX installion DVD will not get recognised and i cannot boot off it either. I have tried using 2 other discs still with the same issue. The confusing thing is that the CD/DVD drive works fine and the MacOSx discs work fine in other macs as i have tried it in my brothers machine.
Any help appreciated.
ThanksI don't think that the laptop even has Mac installed anymore becuase in an attempt to reinstall Mac the partition was formatted. And I can't boot of the disc becuase it just ejects by itself after a few seconds in the drive.
-
my macbook pro mac osxv 10.6 snow leopard. when on the power bottan it take a long time boot my mac it will heat all the computer and not open the my mac how can i slove the problams.
Post in your native language. It might be clearer to those with a translator.
-
i made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates? does hot fix of microsoft i.e, " support.microsoft.com/kb/979491" helps in stop freezing in dual boot mechanism?
Windows has a software updater built into Windows and when you install the Boot Camp drivers then it will install an Apple software updater also. I believe Windows is set to automatically download and install your updates as does the Apple software Updater. They both will update the individual files it needs to periodically.
"Microsoft updates" and "Windows updates" are basically the same thing in Windows. Are you talking about the "Windows support software" when downloading from Boot Camp Assistant? Apple installs a software updater for it's Boot Camp drivers in Windows 7 so you can do it manually or automatically.
The "Hot Fix" your referring to is only for certain motherboards built from other Windows only computer manufacturers and does NOT pertain to any Apple computers.
If you have a problem with your computer then it's best to ask a specific question so we can help better. -
USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?
OS X installers have always been fairly specific, hardware-wise. I haven't read anything reflecting that situation with the Recovery HD, so it may be that the Recovery HD created for the MacBook Pro does not have the necessary drivers for the Mac Pro. Obviously, nothing definitive here, but a possibility.
-
I have MacBook Pro (early 2011) with Mac OS X 10.6.8. How to make Cannon MF 5770 printing? I know that Canon have not provided drivers. Is it any way around it?
Updated printer drivers.
http://support.apple.com/kb/DL899 -
Can i erase my stolen macbook pro with find my mac even if it states the device was locked on a specific date (not by me) after being stolen?
Barry, the other stolen computer, my IMac does not show me a locked on such and such date, but simply says offline. I set that computer to erase when it goes online and notify me when it is found, and to play a tone and play a message that the police are on their way!
-
Can somebody please advise urgently...
I backed up my entire hard-drive of my macbook pro - just prior to installing osx mountain lion.
I put everything into a folder on my desktop - then backed it up onto an external drive. Once this was done - i deleted the folder off my desktop - and following this - things started to go all weird...pages hanging, the coloured 'wheel of death' appeared for ages. So i had to employ a 'hard-boot' restart - as i had not other options.
I'm pretty sure i made copies of of files/apps/folders etc - however not so sure now as i cant even start up my laptop!!!
Can somebosy please help me urgently??!!!Got the exact same problem, and I also did this operation many times before, from 500Gb to 750Gb, and then from 750Gb to 1 Gb. Not My HD got a little such complaining about bad sectors when in windows bootcamp, but still runs fine though.
So I bought a new 1Gb drive exactly same drive as the one thats getting sick. I did the clone thing, with super duper, CCC, DU, but no matter it will not boot when i move the new drive inside the macbook…….**** thing exuse me, but wasted so much time.
Now I get this strange feeling that something must have changed in the macbook itself. Just wondering if this could be a EFI "mac bios" prevention thing, they made just to sell more new computers, when you can't improve or fix your old one.
If so, then its pretty scary. If not then I simply can't figure out why this suddenly becomes a problem for so many people, as I see so many posts about this!!
BR Pete -
Can't boot to Mac osx, Error -2100F
Hi there,
I got a Macbook Pro Retina Late 2012, and I made a dual boot to Windows 7 today.
The problem is when I try to boot to Mac osx it automaticly start up as Windows 7.
I tried to use the Command key to get the Mac osx running and the only boot that I see is Windows 7.
After that i tried using Command + R to recover it and it gave me an error -2100F.
I also tried to use Boot Camp to Boot to Mac but that also goes straight to Windows.
My guess is that I deleted the wrong partition when I installed Windows 7 and that i am unable to boot to Mac osx now.
Can anyone help me fix the problem?
Thanks in AdvanceUse your backup(s). Erase and restore.
Also XP is not being actively supported.
With OS X upgrades you always need to check and make sure you have the latest, like Parallels 7, or there is VirtualBox 4.x
Sounds like you simply had a corrupt hard drive.
Lion 10.7 will only support Windows 7 except in a VM. -
My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.
Hello Kierasully,
I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
Mac OS X: Gray screen appears during startup
http://support.apple.com/en-us/ts2570
Regards,
-Norm G. -
How to make Address Book obey Preferences?
I run MacBook Pro 4.1 laptop, Mac OS X 10.6.8
Address Book 5.0.3 (883)
Preferences set at ...
General
First name following Last name
Sort for Last name
Address Format Canada
Font size Large
Phone format set at
+1.123.456.7890
When application quits - it's all forgotten and it self-resets to
unwanted configuration.Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.
Maybe you are looking for
-
We're on 46c and currently using an existing sapscript to generate and email PDF output. The new requirement is to make this form editable so that certain fields (say comments) can be updated in adobe and later printed/emailed. Is it possibile withou
-
Error while installing P6 EPPM 8.3
Hi All, I had installed P6 EPPM 8.3 so many times but i have not faced any issue while installing. But this time while installing i am getting error as " C:\P6EPPM\p6\adminpv.cmd" not found make sure that file exist on disk. Please help me to resolve
-
Related documents or links on how to call webservices from WDJ
Hi all i need documents & links on how to call webservices from Webdynpro for Java. if anybody send the documents on sample scenarios on the same then it is the great help to me... Thanks Sunil
-
How to run a particular JRE at run time
Hi All, I have two different versions of Java installed in my system (JDK 1.5 & JDK 1.6). The path in environment variables is setted to jdk1.5. But after installation of jdk1.6 it is showing as jdk1.6. I want to test my code for these two different
-
Hi guru's in SMART FORMS how i can get subtotals , and page totals
hi guru's in SMART FORMS how i can get subtotals , and page totals plz help me