Macbook Pro Not detecting my FireWire

Hello,
I just had an accident a few months ago that caused many of the ports of my MacBook Pro to be crushed, however, i had the ports and logic board replaced so it should be working now. However, when i plugged in my FireWire to import a video i had shot on my Camcorder, the camera detected the FireWire but my Mac did not. I tried rebooting to solve the issue, but for some reason my Mac is not detecting the FireWire at all. The FireWire is an Apple WireFire 800 and the camera it is connected to is a Canon VIXIA HV30. I need to use my FireWire for University Classes and an internship i have. How can i fix this?

This camera is supported. You need a Firewire Cable. For FW400, you need a 4 pin to 6 pin cable. For FW 800 you need 4 pin to 9 pin cable. When going down from 6 pins (or 9) to 4, you lose the pins that provide power. So your camcorder must be plugged in to wall power (not batteries). Make sure your camcorder is in Playback mode.
Open iMovie. If it is not detected automatically in a miinute or two, try clicking on the camera icon at the left of the middle bar.

Similar Messages

Macbook pro not detecting iphone 4s

My new macbook pro will detect and charge my classic iPod through a USB cable but will not even detect my iPhone 4s with the same cable. I have tried other usb cables that charge my phone daily and they will still not help detect my computer detect it. I have downloaded all updates for both my phone and computer and restarted both of them. What is going on?

reset network settings settings-general-reset network settings...click on wifi that u r using n renew lease

MacBook Pro not detecting display resolution properly on Leopard 10.5.2

I have a 15" 2.2ghz MacBook Pro that I recently upgraded to Leopard. When I am home, I connect the MBP to a USB keyboard and mouse, and a Samsung 226BW 22" display using a DVI cable. Prior to the Leopard upgrade, I could connect the components, close the MBP, hit the spacebar on the USB KB and the MBP would wake up using the Samsung in its native resolution of 1680x1050.
Since the upgrade there are two major problems. I can no longer wake the MBP up with the KB. It sounds like it is waking up, the Apple logo illuminates for a moment, then it immediately goes back to sleep. Secondly, the MBP is not detecting the correct resolution of the monitor. It shows both as being 1440x900 no matter what. Under the system profiler, it has exactly the same description for both the MBP display as well as the Samsung 22". I have already read other posts and performed the following:
Reset the SMC
Reset the VRAM
Trashed the windowserver.plist and rebooted
Any ideas on why this may be happening? Thanks in advance.

You are not alone. Spent over an hour with AppleCare support. The engineer was fantastic, but when he got out of his area of expertise and tried to take me to level 2 support, the level 2 folks said 'contact samsung' That's obviously a delay tatic. This is very clearly a 10.5.2 upgrade issue. My external 24 inch samsung display was working fine prior to the upgrade and now it's stuck on 1440X900. They took me through PRAM resets, cache clearing, plist removal etc.
Very disappointed to see Apple take a very microsoft like stance to a problem that is obviously a bug in the graphics drivers for 10.5.2. The engineer also indicated that this was a known issue, but the docs on it are 'eyes only'. I question that culture as well.

MacBook Pro not detecting flash drive

Hello,
I have a MacBook Pro laptop (latest model) and I've encountered a bit of a problem with it.
When I plug a USB flash drive into either of the USB ports on the laptop, the computer fails to detect the drive and show it on the desktop.
However, when connected to my Thunderbolt Display and with the USB drive connected through the monitor or even through the keyboard (which is connect to the monitor) the laptop detects the USB drive without any issues. Also when I connect the keyboard directly into the laptop via USB and then plug the USB drive into the keyboard it detects it just fine.
The problem only occurs when plugging the USB drive directly into one of the laptop ports.
Any suggestions on how I can fix this?
Thank you

vas12345 wrote:
Yeah, it's just one drive. I think I figured out what the problem is. The USB drive is very old and cheap, most likely USB 2.0 but the ports on the MacBook Pro are USB 3.0 so there might be a compatibility problem.
In theory that should not be the case since USB3 is supposed to be backwards compatible to USB2. Perhaps the solution is to copy the data to a new device and trash the old drive. At least the cost will not be excessive.
Ciao.

Macbook Pro not detecting & connecting to my home network

Hello,
I am suddenly facing this issue wherein my Macbook Pro is not able to detect and connect to my Home Wireless connection. My iPhone and iPad are able to connect to the network, but not my Macbook.
Can someone suggest a solution

reset network settings settings-general-reset network settings...click on wifi that u r using n renew lease

Camera for macbook pro not detecting camera since upgrade to mountain lion

I recently upgraded from Snow leopard to Mountain Lion and I was trying to make a video call in skype. The camera worked for a minute or so then stopped working. Since then my camera hasn't been detected by my Macbook pro. Can anyone help me?

I recently upgraded from Snow leopard to Mountain Lion and I was trying to make a video call in skype. The camera worked for a minute or so then stopped working. Since then my camera hasn't been detected by my Macbook pro. Can anyone help me?

Macbook Pro not detecting USB network interface for iPhone 4S

Hi all.
I have an iPhone4S and my service provider is Vodafone India. I was able to share my internet 3G connection (Personal Hotspot) via USB with my Macbook Pro until recently. I am running Lion. I am not able to do so anymore for some inexplicable reason. It still works fine with Wifi and Bluetooth, but no Internet via USB. I tried deleting the networkinterfaces.plist as someone suggested but no luck.
Am at my wits end. I am sure its not the Phone and I am sure the USB ports are ok since I can connect via USB stick dongle modems from 2 different service providers. But they are bboth dial up types.
Just the iPhone does nbot seem to work since it is supposed to connect automatically.
Help please....anybody...
Thanks a ton for any feedback in advance.

reset network settings settings-general-reset network settings...click on wifi that u r using n renew lease

Macbook Pro not detecting external display

I can't seem to make this work. I'm using a MiniDP-DVI cable which is plugged into an DVI cable plugged into an external monitor. I know it works because I have tried it on other computers and it has worked on the Macbook (erratically).
I've reset the PRAM several times and it has not fixed the problem. I did it in this order:
1. Remove adapter from computer
2. Shutdown
3. Press Option Command P R until the second chime is heard.
4. Log on as usual
5. Reconnect adapter to MBP
This is what the system log states when I plug the adapter in:
Oct 27 20:47:01 SMBP.local WindowServer[80]: Received display connect changed for display 0x42732c0
Oct 27 20:47:01 SMBP.local WindowServer[80]: Created shield window 0x66 for display 0x042732c0
Oct 27 20:47:01 SMBP.local WindowServer[80]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
Oct 27 20:47:01 SMBP.local WindowServer[80]: Received display connect changed for display 0x3f003d
Oct 27 20:47:01 SMBP.local WindowServer[80]: Received display connect changed for display 0x3f003e
Oct 27 20:47:01 SMBP.local WindowServer[80]: Received display connect changed for display 0x3f003f
Oct 27 20:47:02 SMBP.local WindowServer[80]: Display 0x042732c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 9 modes available
          Main, Active, on-line, enabled, built-in, boot, OpenGL-accel, Vendor 610, Model 9ccb, S/N 0, Unit 0, Rotation 0
          UUID 0x0000061000009ccb00000000042732c0, ColorProfile { 3, "Color LCD Calibrated 2012-06-28"}
Oct 27 20:47:02 SMBP.local WindowServer[80]: GLCompositor: GL renderer id 0x01024301, GL mask 0x0000000f, accelerator 0x00004333, unit 0, caps QEX|QGL|MIPMAP, vram 451 MB
          texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
Oct 27 20:47:02 SMBP.local WindowServer[80]: Display 0x003f003f: GL mask 0x8; bounds (2304, 0)[1 x 1], 1 modes available
          off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
          UUID 0xffffffffffffffffffffffff003f003f
Oct 27 20:47:02 SMBP.local WindowServer[80]: Display 0x003f003e: GL mask 0x4; bounds (2305, 0)[1 x 1], 1 modes available
          off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
          UUID 0xffffffffffffffffffffffff003f003e
Oct 27 20:47:02 SMBP.local WindowServer[80]: Display 0x003f003d: GL mask 0x2; bounds (2306, 0)[1 x 1], 1 modes available
          off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
          UUID 0xffffffffffffffffffffffff003f003d
Oct 27 20:47:02 SMBP.local WindowServer[80]: Created shield window 0x68 for display 0x042732c0
Oct 27 20:47:02 SMBP.local WindowServer[80]: Created shield window 0x69 for display 0x003f003f
Oct 27 20:47:02 SMBP.local WindowServer[80]: Created shield window 0x6a for display 0x003f003e
Oct 27 20:47:02 SMBP.local WindowServer[80]: Created shield window 0x6b for display 0x003f003d
Oct 27 20:47:02 SMBP.local WindowServer[80]: Display 0x042732c0: MappedDisplay Unit 0: Startup Mode 1280 x 800, CGSThirtytwoBitColor, Resolution 1, IOMode 0x80000000, IODepth 0x0, IOReturn 0x0
Oct 27 20:47:02 SMBP.local WindowServer[80]: Display added
Oct 27 20:47:02 SMBP.local WindowServer[80]: Display removed
Oct 27 20:47:02 SMBP.local WindowServer[80]: Display 0x042732c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 9 modes available
          Main, Active, on-line, enabled, built-in, boot, OpenGL-accel, Vendor 610, Model 9ccb, S/N 0, Unit 0, Rotation 0
          UUID 0x0000061000009ccb00000000042732c0, ColorProfile { 3, "Color LCD Calibrated 2012-06-28"}
Oct 27 20:47:02 SMBP.local WindowServer[80]: GLCompositor: GL renderer id 0x01024301, GL mask 0x0000000f, accelerator 0x00004333, unit 0, caps QEX|QGL|MIPMAP, vram 451 MB
          texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
Oct 27 20:47:02 SMBP.local WindowServer[80]: Display 0x003f003f: GL mask 0x8; bounds (2304, 0)[1 x 1], 1 modes available
          off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
          UUID 0xffffffffffffffffffffffff003f003f
Oct 27 20:47:02 SMBP.local WindowServer[80]: Display 0x003f003e: GL mask 0x4; bounds (2305, 0)[1 x 1], 1 modes available
          off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
          UUID 0xffffffffffffffffffffffff003f003e
Oct 27 20:47:02 SMBP.local WindowServer[80]: Display 0x003f003d: GL mask 0x2; bounds (2306, 0)[1 x 1], 1 modes available
          off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
          UUID 0xffffffffffffffffffffffff003f003d
Oct 27 20:47:03 SMBP.local WindowServer[80]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Oct 27 20:47:03 SMBP.local WindowServer[80]: Display 0x042732c0: MappedDisplay Unit 0; ColorProfile { 3, "Color LCD Calibrated 2012-06-28"}; TransferTable (256, 3)
Oct 27 20:47:04 --- last message repeated 1 time ---
Oct 27 20:47:04 SMBP.local WindowServer[80]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Oct 27 20:47:04 SMBP.local WindowServer[80]: Display 0x042732c0: MappedDisplay Unit 0; ColorProfile { 3, "Color LCD Calibrated 2012-06-28"}; TransferTable (256, 3)

I had the exact same behavior and log and I solved the issue by replacing the MiniDP-DVI adapter. I tried the "broken" adapter on another set of laptop+display and it was working there, so that made me think the adapter was ok, when apparently it was not.

Macbook pro not detecting my hard drive

I have been using this 500GB WD Hard disk and it has been working properly. However, it is not being detected today when I plugged it in.
I have tried methods like "automatically fixing errors" at PCs and checked it on Disk Utility, unfortunately it is still not working. I have important files in it and what should I do?
Thanksss x

eww's suggestion may seem a bit rash, but I've found that to be the case also. My WD external's enclosure also fried.
I bought OWC's FW hard drive encloser. You can put in your own drive(s) (I bought Seagate drives from OWC) depending on whether you want a single drive backup, dual or RAID. I bought the OWC Mercury Elite...great enclosure rated top in all my Mac magazines. What's nice about these is, if the drive goes bad you can replace it yourself and not have to get rid of the whole unit (like what happened to my Western Digital FW Ext. drive last time!). OWC's enclosures have Oxford chipsets which are totally Mac friendly. They also work for Windows machines. OWC also backs up their products...no arguing involved.
DALE

MacBook Pro not detect OS X bootable USB

I make the bootable USB in disk utility in OS X recovery beacuse i can't boot to my mac. but my mac can't detect my bootable USB when i hold (option) key while boot up.

Hello there, Tomzvvip.
The following Knowledge Base provides another way to boot up to that device:
Startup Manager: How to select a startup volume
http://support.apple.com/kb/HT1310
How to choose the startup volume
Follow these steps:
Turn on, or restart, your Mac.
Immediately press and hold the Option key. After a few seconds, the Startup Manager should appear. The Startup Manager scans for available volumes.
Use the left and right arrow keys on the keyboard to select the volume you would like to use.
Press the Return key on your keyboard to start up the computer from the volume you selected.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I have a new 2.0GHz Intel Core i7 macbook pro and my external firewire drive is causing the laptop to lock up

I have a new 2.0GHz Intel Core i7 macbook pro and my external firewire drive is causing the computer to lock up. The drive seems to sleep and then never wakes and the laptop locks up. I've had this drive connected to an older 2.0 core duo macbook pro and a 3.0GHz quad core macpro with no issues. It's a ministack v3 drive, 2GBs, fw400+800, sata and usb. Any ideas? And can I stop the drive from going to sleep?
Thanks.

Check with the drive's manufacturer to see if they might have a firmware update for the enclosure; it sounds like the enclosure's firmware isn't properly detecting the FireWire wakeup sequence.
Obviously this could also be a bug with the new MBP's firmware, so it wouldn't hurt to ask the Genius Bar at your local Apple Store; in particular, ask them to show you that the sleep/wakeup sequence on your MBP works with some other FireWire drive.

Hi, how do i stop my macbook pro not to automatically connect to a wifi connection that is not my preferred network? i want to automatically connect my macbook to my preferred network everytime i turn on my laptop. thank you.

hi, how do i stop my macbook pro not to automatically connect to a wifi connection that is not my preferred network? i want to automatically connect my macbook to my preferred network everytime i turn on my laptop. thank you.

System Preferences > Network > WiFi
To give a network the highest priority, drag the name of the network to the top of the list. This is the network your computer will attempt to join first.
http://support.apple.com/kb/PH13797

I can't turn off my macbook pro not even force quit.it keeps restarting soon after i let go of button

I can't turn off my macbook pro,not even when I try to force quit.Mid 2009 17 inch all the software up to date.Problem started 3 days ago and mac is slow to load when restarted.Please help

Hi there nina777s,
You may want to try resetting the PRAM and SMC on your Mac as an initial troubleshooting step. Take a look at the articles below for more information.
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
-Griff W,

Why will macbook pro not go to sleep with Lion OS?

Why will macbook pro not go to sleep with Lion OS?

Test after each of the following steps that you haven’t already tried:
Step 1
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter ▹ Wake for network access: uncheck. You may need to unlock the preference pane by clicking the lock icon in the lower left corner and entering your administrator password.
Step 2
 ▹ System Preferences ▹ Energy Saver ▹ Schedule… ▹ Start up or wake: uncheck
Step 3
 ▹ System Preferences ▹ Print & Scan ▹ Open Print Queue...
Check all printers for unfinished jobs. Deal with any you find.
Step 4
Disconnect all wired peripherals except keyboard, mouse or trackball, and monitor, if applicable.
Step 5
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select All Processes from the menu in the toolbar, if not already selected. Enter “powerd” (without the quotes) in the "Filter" text field. Select the powerd process and click the Quit Process button in the toobar (stop-sign icon.) In the sheet that opens, click Force Quit. You’ll be prompted for your administrator password. The process will be relaunched immediately.
Step 6
Boot in safe mode and log in. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the Mac OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
If sleep now works as expected, go on to the next step.
Step 7
Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
Step 8
If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
If you still have the sleep issue after booting out of safe mode, post again.

Macbook will not detect projector?

Macbook will not detect projector?

Just had problems today and spent an hour with an Apple tech. Gave up, called Dell (India) gave up. Rebooted computer and low and behold it worked. That after trying just about everything and being totally convinced that the problem had to be with the projector. So if all else fails, reboot.

Macbook Pro Not detecting my FireWire

Similar Messages

Maybe you are looking for