MacBook Pro not mounting CDs or DVDs

I have a late 2011 MacBook Pro that fails to mount any optical disk inserted into the SuperDrive. All the requisite check boxes are checked on for it to show mounted disks; the disks are drawn in and spin up then they just spin down and sit there until ejected using the eject button. I've inserted CDs & DVDs burned on other Macs and also a music CD and the behavior is consistent for each type.
Is there a way to reset the SuperDrive to re-enable its ability to recognize the inserted optical disks?
Has anyone else seen this problem on this recent vintage system and come up with a solution?
Thanks.
Karl Cook

https://discussions.apple.com/message/12487175#12487175

Similar Messages

MacBook will not mount CDs but will mount & read DVDs

This MacBook is used mainly for surfing, email and word processing. Very few other programs are installed and/or used. Recently it stopped mounting and reading CD's. It continues to mount & read DVD's. When I insert a CD (commercial or home burned) the drives sounds like it is trying to read it and then after awhile it ejects the CD. I have other Macs & PC's which can read the rejected CDs.
All software is up-to-date and disk permissions are in good shape. AppleCare had me reset the PRAM. Would appreciate any other steps I can try to fix the situation. In several weeks, I will be traveling to a city with an authorized Apple repair unit where I can have the computer looked at. I'd rather fix it myself if possible

If your computer is covered by warranty or extended Applecare they will probably replace the drive.
In many cases, though, these sorts of problems can be simply overcome using a drive cleaning disc.
Certainly worth a try if you are out of warranty (Apple have said that they don't like cleaning discs in the past so you may not want to use one if you are still under warranty etc. I have personally used cleaning discs for many years in Apple slot load drives without the slightest problem however, and they have instantly "fixed" drives that would otherwise seem to be beyond redemption!).
Cheers
Rod

Macbook Pro not reading DVDs

My Macbook Pro will read CDs but not DVDs or executable DVDs. Is it a setting or hardware problem?

I've had my MBP since September 09, watched many area 4 dvds, but 6 months ago it started having problems w dvd's... either it would take forever to recognize the movies, or would just spin in the computer... not even ejecting. I recently purchased the family pack of Snow Lepoard 10.6.3, to catch my Mac Pro up to date, and also hoping my MBP's dvd problems would be fixed... no go! The MBP won't even read the Leopard install dvd!!!!!!! It spins for a few minutes, then ejects (well, at least it ejects, bc any movies I put now, just spin for hours). I thought if I copied the contents of the Leopard to pendrive, and then from there installed it, perhaps it'd work. No go. I tried reading the dvd from my Mac Pro, using the mac pro as a slave via firewire to my MBP. No Go. Just says that "Instal MAC OSx cannot be used from this volume". Ok, so perhaps this is not the right way to go about this, but obviuosly there is a real problem w the MBP dvd drive. The only disks the MBP reads are audio cds. From what I read here, many people are having problems w MBP dvd drives... Mac needs to get a solution to us quick! I havn't tried a cleaning disk, bc I afraid I'll never get the disk out of my MBP... I mean if it won't read the OSx install disk, imagine what a disk w little feathers on it will do.. probably explode my laptop! What a bumber this is turning out to be!!!! I will try compressed air, but I doubt it will have an effect. Any other ideias?

HELP! MacBook Pro cant recognise or burn DVDs but only CDs, and...

Hi all
I noticed that there many of you have the same problem, but I really need some advice here, my MacBook Pro cant recognise or burn DVDs but only CDs, well actually occasionally it does recognise the DVDs then it burn but cannot write (on Toast), also in many other apps, like iDVD or DVDSP, it does run well on the first part of the burning but then failed at the end, with all kinda diff error msg. I have tried using many diff brands of disc too, inc verbatim.
So I borrowed my friends external DVD writer (actually a cheapy one with no brand), when I tried to burn using the external then an error msg comes up and says the writer cannot recognise the disc.
I dont wana get the MBP to repair but just wana get a external DVD writer to solve the problem, cos i need to use my computer and dont have a replacement mac, but now I am worry if the problem i now having is a system problem or just hardware, not sure if it is because the DVD writer i borrow is cheapy so it doesnt cope with mac, or just my MBP have system error that cant burn DVDs...
But my MBP can burn CDs so it is not a hardware problem? and if that is a system problem so even I buy a new DVD writer wont solve the problem?
btw, I have tried many solving methods like rewriting permission, reset PVRAM, etc
PLSSSSSSSSSSSSSSSSSSSSSSSSS HELP

I'm having the same problem you are on my 2.4GHZ Core2Duo MBP running 10.5.2. It will sometimes recognize DVDs, sometimes not... it chuggs and clunks and then spits the disc out. If i re-insert it a view times it will show up on the desktop. I get failures from Toast as well as iDVD. If i keep trying i have been able to burn files onto a disc with the finder, but then the burner fails during the verification. If put the disc back in the contents appear to be correct (after a quick look). Burning CD-Rs seems to be working fine, that with the occasional DVD write seems to point away from the HW. I am trying with both Memorex DVD+RW and Verbatim DVD-Rs...
I have tried the command/option-PR reset combo with no luck.
Any ideas?
thanks,
-graham
PS the specific error i got from iDVD was: The error #-2147352539 was reported…
Message was edited by: Graham - Sonos

MacBook Pro not reading some DVD's.

My 18 month old, 15" MacBook Pro refuses to read some DVD's, even a new DVD out of the packet. When I insert the disc I can hear the drive whir up but it doesn't whir up as far as it does when I put a DVD in that it will read. The drive just keeps whirring up and down and if I leave it eventually I get a message saying I have inserted a blank DVD but this usually appears after a good 5 minutes. The only way I can I remove the DVD is by restarting my MacBook whilst holding down the eject button.
Any ideas?

Another help source (if you haven't already done so).
Go to your OS Help Menu. In the search field type dvd
Click on all the troubleshooting topics & Support Articles that pertain to your issue.
You can also do the same in Disk Utility. Open same up.
At the bottom left of the window, click on the purple button w/the "?" in the middle.
This will bring up the Help Menu.
===============
Try a different brand. Top forum favorites
CDs
FUJI
TDK
Verbatim
DVDs
Maxell
Verbatim
Make sure the DVDs are not dirty, smudged and/or scratched.
http://docs.info.apple.com/article.html?artnum=50448 How to Handle and Clean CD and DVD Discs
Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.
Check out the following KB Article: http://support.apple.com/kb/HT2801 Apple Portables: Troubleshooting the slot load optical disc drive

Yosemite Update - Now cannot mount CDs or DVDs

My MacBook Pro will no longer mount CDs or DVDs after upgrading to Yosemite.
Appreciate any suggestions!
Thanks!
...John

Did all the suggested workarounds but it turns out the Optical Drive had died - some 2 weeks after my 3 year Applecare Warranty expired!
Bought & installed a replacement - all is well!
Problem was not Yosemite!!

My macbook pro ejects all cds

my macbook pro ejects all cds
i have updated my macbookpro to lion and after this it does not exept any dvd and cds any more

Most often this is caused by dust on the Laser lens. I suggest you take a credit card and put only part way into the slot and get a can of compressed Air and go back and forth in the slot and restart your computer and try again

I need to download a DVD to my new MacBook Pro but alas, no CD/DVD drive. What now?

I need to download a DVD and some CDs to my new MacBook Pro but alas, no CD/DVD drive. What now?

Use an external optical drive such as Apple's USB SuperDrive, or one inside another computer.
(118366)

Macbook Pro 15" Need to Replace DVD drive

I was wondering where I could go to either purchase a new Matshita DVD-R UJ-857 drive for my macbook pro, or a comparable slot-DVD drive. It is out of warranty, and I would rather install it myself to save cash on installation, because I am knowledgeable in computer building. Will apple sell this part, if not, where can I go to purchase it/what drives will fit properly?
Thanks!

This is a compatible drive.
http://store.fastmac.com/productinfo.php?cPath=10_2_33&productsid=336
Good luck!

Macbook pro rejects all cds

My macbook pro rejects all cds, but will accept dvds. What can I do? I have system 10.6.8. Thank you.

Tried another maker?
By all cd's do you mean music cds, data cds too?

I just bought a 15" macbook pro, do the cds that come with the mac have the drivers i need to update windows after installing windows using boot camp?

I just bought a 15" macbook pro, do the cds that come with the mac have the drivers i need to update windows after installing windows using boot camp?

What DVDs are this ?
If it is OSX Snow Leopard Installation DVD then yes this disc contains the BootCamp Drivers version 3.x and is needed after the installation of Windows to install the BootCamp Drivers.
With OSX Lion BootCamp is at version 4.x and the BootCamp Drivers have to be downloaded during use of the BootCamp Assistant in OSX.
Boot Camp 3.0, Mac OS X 10.6 FAQ
Frequently asked questions about Lion and Boot Camp 4.0
Stefan

Hi, how do i stop my macbook pro not to automatically connect to a wifi connection that is not my preferred network? i want to automatically connect my macbook to my preferred network everytime i turn on my laptop. thank you.

hi, how do i stop my macbook pro not to automatically connect to a wifi connection that is not my preferred network? i want to automatically connect my macbook to my preferred network everytime i turn on my laptop. thank you.

System Preferences > Network > WiFi
To give a network the highest priority, drag the name of the network to the top of the list. This is the network your computer will attempt to join first.
http://support.apple.com/kb/PH13797

I can't turn off my macbook pro not even force quit.it keeps restarting soon after i let go of button

I can't turn off my macbook pro,not even when I try to force quit.Mid 2009 17 inch all the software up to date.Problem started 3 days ago and mac is slow to load when restarted.Please help

Hi there nina777s,
You may want to try resetting the PRAM and SMC on your Mac as an initial troubleshooting step. Take a look at the articles below for more information.
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
-Griff W,

Why will macbook pro not go to sleep with Lion OS?

Why will macbook pro not go to sleep with Lion OS?

Test after each of the following steps that you haven’t already tried:
Step 1
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter ▹ Wake for network access: uncheck. You may need to unlock the preference pane by clicking the lock icon in the lower left corner and entering your administrator password.
Step 2
 ▹ System Preferences ▹ Energy Saver ▹ Schedule… ▹ Start up or wake: uncheck
Step 3
 ▹ System Preferences ▹ Print & Scan ▹ Open Print Queue...
Check all printers for unfinished jobs. Deal with any you find.
Step 4
Disconnect all wired peripherals except keyboard, mouse or trackball, and monitor, if applicable.
Step 5
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select All Processes from the menu in the toolbar, if not already selected. Enter “powerd” (without the quotes) in the "Filter" text field. Select the powerd process and click the Quit Process button in the toobar (stop-sign icon.) In the sheet that opens, click Force Quit. You’ll be prompted for your administrator password. The process will be relaunched immediately.
Step 6
Boot in safe mode and log in. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the Mac OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
If sleep now works as expected, go on to the next step.
Step 7
Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
Step 8
If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
If you still have the sleep issue after booting out of safe mode, post again.

Why does the internet on my new macbook pro not work when my old macbook's does?

Why does the internet on my new macbook pro not work when my old macbook's does? I'll have to turn the wifi off and back on multiple times to get the internet to continue to work on my Macbook Pro (running mountain lion but did it on lion also) when it runs fine on my old white Macbook (running lion). Is there something I can do to fix it or do I just have to deal with it?

Here is your fix .. I have uploaded my properly calibrated profile get it here :
http://www.megaupload.com/?d=YAJL6A9X
And it should go to your user folder/Library/ColorSync/Profiles
if you have one already you can rename either one ..
and then go to system preferences - displays - color to select the profile .
you will get rid of the blue tint while keeping correct color and gamma
This is for the newer 2010 MBP's altho if same display was used might also give good results in the previous models as well . .

MacBook Pro not mounting CDs or DVDs

Similar Messages

Maybe you are looking for