Macbook Pro not printing to Windows network printer

Hello,
Recently purchased Macbook Pro Mac OS 10.7.2 Lion and I am unable to print to a windows network printer.
When I click the print button nothing happens. I have tried to print from Safari, Word, Excel etc and nothing happens.
The printer is added and showing as idle. ( I am able to print to the printer from my own Windows 7 PC).
I have reset the printer settings and re-added but the issue remains.
Both the printer and Macbook are connected to the network.
Has anyone any suggestions please?.
Thanks,
Frank

. are you using the right driver? try checking with HP if they have a driver that is compatible with lion.
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?taskId=135&cc=u s&lang=en&prodSeriesId=3690646&prodTypeId=18972

Similar Messages

HT3049 Why do I keep getting "Connection failed: NT_STATUS_BAD_NETWORK_NAME" when trying to print on Windows networked printer over wi-fi?

Why do I keep getting "Connection failed: NT_STATUS_BAD_NETWORK_NAME" when trying to print on Windows networked printer over wi-fi?

If I run the following (on the machine I'm trying to set up the share)
smbclient -L localhost -U%
I got the following output
Connection to localhost failed (Error NT_STATUS_CONNECTION_REFUSED)
so I thought it might be something incorrect with the iptables side of things, however I haven't really touched that at all and it seems to look correct
iptables -nvL
Chain INPUT (policy ACCEPT 667 packets, 79977 bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 157 packets, 20724 bytes)
pkts bytes target prot opt in out source destination
So from my (very little) knowledge this appears correct (I think)... However it appears that something is blocking access somewhere.

MacBook Pro Not Working with Dell V715W Printer?

Hello. I have a 2010 MacBook Pro 13-inch that's hooked up to a Dell V715W Printer. I can print out a test page fine, but nothing else. It always says "Filter Failed." Sometimes, however, a message comes up with a TON of code and details with the subject saying: "CUPSdriver quit unexpectedly." What should I do to fix this? Please help me!

Reset the printing system. Google for instructions.

Print to windows networked printer

I am somewhat new to Mac and wondered if someone might be able to help out.
At work, I am trying to connect to a network printer/copier on a windows machine. I can locate the printer fine, but whenever I try to print to it, it simply prints 7-8 pages of random characters or code with some blank pages mixed into it. Is this a driver issue? The printer/copier is a Konica Minolta 7145. The printer selection now says "General postscript printer." Can anyone help? Thanks in advance.

Are you using Bonjour on the Mac and the PC?
That should fix it.
http://www.twistermc.com/blog/2005/06/21/bonjour-for-wireless-mac-pc-printing

Printing from a macbook pro to an HP psc 2355 printer

I need helping printing from a macbook pro to an hp psc 2355 printer. The printer is connected to a pc which runs Windows Vista. The pc is connected to a wireless router (so the PC has to be on to print). Hope this is simple!

You could start by resetting your printing system and then see if the computer sees the printer. http://docs.info.apple.com/article.html?path=Mac/10.6/en/14001.html
Is your wireless network protected by a password? Does it have a name?
I have a wireless HP AIO that I connect thru my wireless router. In other words the wireless router is the hub for the printer so the three notebooks and iTouch can print to it from anywhere in the area.

I have a new MacBook Pro, and when I try to print, the laptop says, "stopped filter failed 1 page". What can I do?

I have a new MacBook Pro, and when I try to print, the laptop says, "stopped filter failed 1 page". What can I do?

Okay, regarding this problem:
I'm trying to print to an Advent AW10 printer from an Imac running Yosemite 10.10.1 and it's been driving me nuts for the last two months...
I got on to Advent yesterday and recieved this instruction from their support team this morning and it worked and I'm now printing away merrily:
Please follow below steps:
In Spotlight search window type Terminal and then press Enter.
This should bring up the terminal window/program.
In the Terminal type:
sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf' then press Enter.
It will ask for your password. Please enter system password.(You will not see password entering)
After that type following:
sudo launchctl stop org.cups.cupsd then press Enter.
Try Printing.
I don't think this is specific to Advent and is rather simply an 'opening up' of something blocking the 'printer channels' (layman's terms obviously)
Hope this helps people out!

Printing to a Windows Network printer after 10.4.9 upgrade

Very desperate with this. We have a couple macs at the office and after a move and some software updates all cannot print via a Windows network printer.
Unable to connect to SAMBA host is the only error we receive.
I checked my smb:\\ syntax, I have tried IP address, tried picking from the list (which by the way the printers do show up yet you cannot print to them)
Extremely frustrating and with an Anti-Mac IT director this gives him more ammo to say Macs are irrelavant in the workplace.
The Macs are bound to Windows Active Directory and the users are Active Directory users. We do not have a Mac OS X server. Our printer server is Windows 2003 SP1, the printers range from an HP LaserJet 4100 to a Xerox WorkCentre 24, all do not work.
The ONLY network printer that appears to work is the printer associated during the login
Curious if anyone with 10.4.7 and higher have problems....

More info...here is the cups/error log when trying to print from a newly added Windows network printer...looking for some help on this....
I [22/May/2007:12:22:45 -0400] Setting FPS2ColorXerox device-uri to "smb://HOPE/fps2.projecthope.org/FPS2-Color Xerox" (was "file:/dev/null".)
I [22/May/2007:12:22:45 -0400] Setting FPS2ColorXerox printer-is-accepting-jobs to 1 (was 0.)
I [22/May/2007:12:22:45 -0400] Setting FPS2ColorXerox printer-state to 3 (was 5.)
I [22/May/2007:12:22:45 -0400] Saving printers.conf...
I [22/May/2007:12:22:45 -0400] New printer 'FPS2ColorXerox' added by ''.
I [22/May/2007:12:23:05 -0400] Saving printers.conf...
I [22/May/2007:12:23:05 -0400] Printer 'FPS2ColorXerox' modified by ''.
I [22/May/2007:12:23:16 -0400] Saving printers.conf...
I [22/May/2007:12:23:16 -0400] Printer 'FPS2ColorXerox' modified by ''.
I [22/May/2007:12:23:16 -0400] Saving printers.conf...
I [22/May/2007:12:23:16 -0400] Printer 'FPS2ColorXerox' modified by ''.
I [22/May/2007:12:23:20 -0400] Saving printers.conf...
I [22/May/2007:12:23:20 -0400] Printer 'FPS2ColorXerox' modified by ''.
I [22/May/2007:12:23:37 -0400] Adding start banner page "none" to job 5.
I [22/May/2007:12:23:37 -0400] Adding end banner page "none" to job 5.
I [22/May/2007:12:23:37 -0400] Job 5 queued on 'FPS2ColorXerox' by 'js721'.
I [22/May/2007:12:23:37 -0400] Started filter /usr/libexec/cups/filter/cgpdftops (PID 6183) for job 5.
I [22/May/2007:12:23:37 -0400] Started filter /usr/libexec/cups/filter/pstops (PID 6184) for job 5.
I [22/May/2007:12:23:37 -0400] Started filter /Library/Printers/Xerox/filter/XeroxWCPFilter (PID 6185) for job 5.
I [22/May/2007:12:23:37 -0400] Started backend /usr/libexec/cups/backend/smb (PID 6186) for job 5.
E [22/May/2007:12:23:39 -0400] [Job 5] Connection failed with error NTSTATUS_BAD_NETWORKNAME
E [22/May/2007:12:23:39 -0400] [Job 5] Unable to connect to SAMBA host, will retry in 60 seconds...DEBUG: Page = 612x792; 11,11 to 601,781
E [22/May/2007:12:24:39 -0400] [Job 5] Connection failed with error NTSTATUS_BAD_NETWORKNAME

How do I print from an iPad to a windows network printer?

How do I print from an iPad 2 to a windows network printer (without AirPrint)?

Thx for the suggestion, but it defeats the purpose by having to have my desktop computer running. I am looking for an app or hardware device that will allow me to print directly from my Ipad to my printers without having to turn on a computer to do it.
I have tried the Lantronix xprint server and while it works with my older Brother Laser it does not work with my newer Kodak ESP Office 6150 (and it doesn't look like they are even interested in attempting to write support for it into their printer list)
I have tried every app in the app store and none of them do the job WITHOUT having to have a computer running on the network.
Let me re-state the problem...
I want to print from either my Iphone 4 or my original version Ipad to my network attached printers without having to have a computer running on the network to do it. I have a Brother HL-5150D laser printer hooked to my apple airport extreme's usb port and a Kodak ESP Office 6150 connected to the network via WiFi. How can I do this.

Hi, how do i stop my macbook pro not to automatically connect to a wifi connection that is not my preferred network? i want to automatically connect my macbook to my preferred network everytime i turn on my laptop. thank you.

hi, how do i stop my macbook pro not to automatically connect to a wifi connection that is not my preferred network? i want to automatically connect my macbook to my preferred network everytime i turn on my laptop. thank you.

System Preferences > Network > WiFi
To give a network the highest priority, drag the name of the network to the top of the list. This is the network your computer will attempt to join first.
http://support.apple.com/kb/PH13797

I can print from my macbook pro using airport express usb connected printer, however my iPad is looking for an airprint printer. Can I direct the iPad to the usb connected printer. Both macbook and iPad confirm a wifi connection through the airport exp.

I can print from my macbook pro using airport express usb connected printer, however my iPad and iphone are looking for an airprint printer. Can I direct the iPad/iphone to the usb connected printer. Macbook iphone and iPad confirm a wifi connection through the airport express.

You will need to install an App like Print Central on the iPad to try to print to the printer. It will allow you to print to most printers. Check with their support folks if you need more info.
PrintCentral for iPad on the iTunes App Store

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
My Mac runs lion and the windows desktop runs Windows XP
I have tried for a few hours or so to connect my mac to this printer over a home network.
For your information it does work when connected directly to my mac using a USB Cable.
If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

My apple devices, in particular my MacBook Pro, have stopped recognizing HP Photosmart printer 6510

My apple devices, in particular my MacBook Pro, have stopped recognizing HP Photosmart printer 6510.

Hi there @T707 , welcome to the forums
I read about how your Mac book Pro running 10.10 is no longer recognizing your Photosmart 6510.
Please respond with the following information and I will look into this for you!
Can you make copies from the front panel of the printer?
How are you connecting the printer to your MacBook? wireless, USB or ethernet
If you haven't yet tried these steps, try them in order:
Mac OS X: How to reset the printing system
Repair disk permissions
Restart the Mac
Click this link and download the full feature driver: HP Photosmart 6510 series Full Feature Software and Drivers - OS X 10.9 Mavericks
In addition, download this driver: HP Printer Drivers v3.0 for OS X
I hope to hear from you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printing to my network printer

I am exhausted trying to get this to work. I am new to mac. Im trying to print to my network printer.
This is my situation. I have multiple PC's all using windows 7 ultimate on my windows 7 homegroup named WORKGROUP. This has been working fine for months. I use one printer, a samsung scx-4300 on my main PC. Through homegroup, all other pc's print to this printer seamlessly.
I just bought a macbook pro iOS 10.6.4. I have tried searching this forum and all over the net for a way to set up my new mac to print to this printer but cant make any progress on the issue. Through forum help, i can now see my macbook in "my Computer" on the other pc's and can look through its files, so there is some communication from my pc's to my macbook. But i cannot see the other pc's from my macbook finder. this may be the issue, not sure.
when i try to print, i go to add a printer, from there i dont know what to do. I click on the windows tab in add a printer but i get nothing.
any help would be greatly appreciated
thanks

First, select Mac Help from the Finder's Help menu and search for "printing." Also see:
Mac OS X- Cannot locate a shared Windows printer
Mac OS X- How to manually add a Windows shared printer
OS X v10.6- Mac 101 - Printing
Set Up Your Home Network, Windows 7 Edition - PC World

Why will macbook pro not go to sleep with Lion OS?

Why will macbook pro not go to sleep with Lion OS?

Test after each of the following steps that you haven’t already tried:
Step 1
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter ▹ Wake for network access: uncheck. You may need to unlock the preference pane by clicking the lock icon in the lower left corner and entering your administrator password.
Step 2
 ▹ System Preferences ▹ Energy Saver ▹ Schedule… ▹ Start up or wake: uncheck
Step 3
 ▹ System Preferences ▹ Print & Scan ▹ Open Print Queue...
Check all printers for unfinished jobs. Deal with any you find.
Step 4
Disconnect all wired peripherals except keyboard, mouse or trackball, and monitor, if applicable.
Step 5
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select All Processes from the menu in the toolbar, if not already selected. Enter “powerd” (without the quotes) in the "Filter" text field. Select the powerd process and click the Quit Process button in the toobar (stop-sign icon.) In the sheet that opens, click Force Quit. You’ll be prompted for your administrator password. The process will be relaunched immediately.
Step 6
Boot in safe mode and log in. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the Mac OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
If sleep now works as expected, go on to the next step.
Step 7
Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
Step 8
If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
If you still have the sleep issue after booting out of safe mode, post again.

Can't print to ethernet networked printer... suddenly!

Today, for some reason I can't print to our networked printer, a Kyocera FS-6950DN laser. All I am getting now is a 'Network host is busy, will retry in 10/15 secs' and the job just holds.
So, what have I tried. To eleminate any printer issues I have successful managed to print direct from my MacBook (also running OSX 10.6.8) without a problem. So the printer seems fine. However, if a connect directly (again via a single ethernet cable) to my MacPro it won't print. I have deleted the printer and created a new one. Actually, I have done this several times. When I go to create a new printer I can see the printer listed a a bonjour printer. I select it, then I use 'generic postcript'. I can choose the my printer here, but I seem to remember that this was a problem when I set it up originally and I was advised to use the generic option. I click add and that used to work. But not now. I have checked that the printer has a static ip address and it does. I have also tried adding the printer as an IP printer and adding the IP address etc maually, but again this doesn't work. I've tried this both with LPD set or IPP set. I get the same busy error message.
Trawling the net I have noticed lots of people with Kyocera print issues relating to the latest OSX Snow Leopard 10.6.8 update. Although having succesfully printed from my MacBook that would suggest that 10.6.8 isn't the issue in my case.
Any help or pointers in the right diection would be greatly appreciated.
Many thanks – Roy
I should also say that I have done the usual... repaired the permissions and reset the PRAM etc. I have ping tested the connection from my MacPro and there is a response from the printer. It's just not finding the printer when I send the job to print?

Managed to fix this by changing the ip address on the printer. It seems that the address was out of range for our new router. Changed the printers static address back to something within range and the printer bust into life. Simple as that. Only took me a day and a half to work it out... : )
If you have similar issues I hope that my post is helpful.
Roy

Macbook Pro not printing to Windows network printer

Similar Messages

Maybe you are looking for