Macbook Pro not reading DVDs

My Macbook Pro will read CDs but not DVDs or executable DVDs. Is it a setting or hardware problem?

I've had my MBP since September 09, watched many area 4 dvds, but 6 months ago it started having problems w dvd's... either it would take forever to recognize the movies, or would just spin in the computer... not even ejecting. I recently purchased the family pack of Snow Lepoard 10.6.3, to catch my Mac Pro up to date, and also hoping my MBP's dvd problems would be fixed... no go! The MBP won't even read the Leopard install dvd!!!!!!! It spins for a few minutes, then ejects (well, at least it ejects, bc any movies I put now, just spin for hours). I thought if I copied the contents of the Leopard to pendrive, and then from there installed it, perhaps it'd work. No go. I tried reading the dvd from my Mac Pro, using the mac pro as a slave via firewire to my MBP. No Go. Just says that "Instal MAC OSx cannot be used from this volume". Ok, so perhaps this is not the right way to go about this, but obviuosly there is a real problem w the MBP dvd drive. The only disks the MBP reads are audio cds. From what I read here, many people are having problems w MBP dvd drives... Mac needs to get a solution to us quick! I havn't tried a cleaning disk, bc I afraid I'll never get the disk out of my MBP... I mean if it won't read the OSx install disk, imagine what a disk w little feathers on it will do.. probably explode my laptop! What a bumber this is turning out to be!!!! I will try compressed air, but I doubt it will have an effect. Any other ideias?

Similar Messages

  • MacBook Pro not reading some DVD's.

    My 18 month old, 15" MacBook Pro refuses to read some DVD's, even a new DVD out of the packet. When I insert the disc I can hear the drive whir up but it doesn't whir up as far as it does when I put a DVD in that it will read. The drive just keeps whirring up and down and if I leave it eventually I get a message saying I have inserted a blank DVD but this usually appears after a good 5 minutes. The only way I can I remove the DVD is by restarting my MacBook whilst holding down the eject button.
    Any ideas?

     
    Another help source (if you haven't already done so).
    Go to your OS Help Menu.  In the search field type dvd
    Click on all the troubleshooting topics & Support Articles that pertain to  your issue.
    You can also do the same in Disk Utility.  Open same up.
    At the bottom left of the window, click on the purple button w/the "?" in the middle.
    This will bring up the Help Menu.
    ===============
    Try a different brand.  Top forum favorites
    CDs
    FUJI
    TDK
    Verbatim
    DVDs
    Maxell
    Verbatim
    Make sure the DVDs are not dirty, smudged and/or scratched.
    http://docs.info.apple.com/article.html?artnum=50448  How to Handle and Clean CD and DVD Discs
    Your drive may need cleaning.  Cleaning kits can be purchased from any store that sells CD/DVDs.
    Check out the following KB Article: http://support.apple.com/kb/HT2801 Apple Portables: Troubleshooting the slot load optical disc drive

  • Why is my new Macbook pro not reading my iphone 3GS device but my Windows desktop does not seem to have this problem?

    Whenever I plug my iphone 3GS into my windows PC I have no problem syncing and backing up my apps etc but whenever I plug it into my new macbook pro, it simply cannot read my device at all and everything is fully updated. Help please. Thank you

    I cannot recall the DVD player ever being a place to "store" videos - it is simply an app to play videos.
    If your machine is new, then iMovie should be included as the "shrunk" version of iLife is included with Lion (iMovie, Garageband, and iPhoto). However, iMovie is not a place to store videos either - it is a video editor. You import your clips and edit them in order to then burn to a DVD or share via a social media site.
    Have you considered simply dragging the clips to your folder "Movies"? That would be a great place to just store them (please be aware that videos are usually large files, so keep your hard drive space in mind so you keep a minimum free and available for the OS to operate properly):

  • Macbook pro doesnt read dvd+r burned by my new imac

    i burned a dvd r with my imac and when i inserted in in the imac drive again
    it read all of it with no problem
    when i inserted the same disc in my macbook pro it didn't manage to read it or even recognize it
    what might be the problem

    If you have Apple Care, then call them. If you do not have Apple Care, then you will be charged for "tech" service. You will come out cheaper if you try the solution that iVmichael mentioned. Or try the suggestions mentioned in the Help menu as those are free.

  • MacBook Pro not recognizing DVDs

    I have a 2 Ghz week 10 MacBook Pro, and it just recently started doing this. The DVD is not bad, i checked both of the DVDs i used on other DVD players. This is what happens:
    -i insert the DVD
    -it starts spinning and DVD Player launches, but stays in window mode
    -the movie DOES NOT play
    then if i touch any controls such as play or rewind, it says Supported Disc Not Available. i also have MacTheRipper and that doesnt show the DVD either. as i said before, ive used DVD Player succesfully along with MacTheRipper. Any help would be appreciated.
    -UnBiased

    I'm also having problems. My MacBook Pro 17 spits out blank Memorex DVD+RW media after spinning around for about 45 seconds. The Media says it's OK at 4x, and the drive is also spec'd at 4x?! My buddy's HP PC burns these DVDs just fine. Apple has (supposedly) replaced the drive it still does the same thing.
    Any ideas/thoughts out there? Thanx.

  • Macbook pro not reading hard drive blinking question mark

    Just got a new replacement MacBook Pro.   Did a restore from timemachine and the Apple updates.   Opened a finder and could not find the internal hard drive.  (nothing else connectd to the laptop)   attempted to open the applications folder and got stuck with a spinning wheel.   Re=started 5 minutes later and nothing happened.
    Did a OPTION Key restart, connected to the network and did a disk util.  No internal drive displayed.
    The old laptop's HD died 4 times.  Now this new one dies right out fo the box?   Back to the Apple store tomrrow morning.  
    Any suggestions?

    Got to the Finder? From the Finder menu: Finder>Preferences. Hard Disk box checked?

  • Friends MacBook Will Not Read DVD's!

    Hey there I have a friend who just bought a new MacBook before she went off to college and it will not read certain DVD's. I have no idea what the problem is. The first DVD that I tried worked just fine, but when I put in a different one it would just kick it right back out at me. Please Help Thanks!

    Hi,
    I realise you have already tried some of the steps listed below, but it may be worth trying the following procedure from start to finish.
    First, from the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'.  In to the prompt type the following command and hit enter.
    sfc /scannow                 ( note that there is a space between sfc and the / )
    Let the process complete, then type exit and hit enter.  Restart the PC.
    Next, try the automated fixit from Microsoft on the link below.
    Vista
    Check if the drive is now working.
    If the drive is not working, from the Start Menu, open the Control Panel and click on Device Manager.  Click to open the IDE ATA/ATAPI Controllers.  Right click on the first channel and select uninstall.  Do not delete drivers if asked.  When uninstalled repeat the process for each channel.  Also if an ATA controller is listed, right click and uninstall this, again not deleting drivers if asked. Then open DVD/CD-ROM Drives.  Right click the drive and select uninstall.  Do not delete drivers if asked.
    Reboot the PC and let Windows reinstall the devices.  Check the drive again.
    If it still isn't working, run the automated fixit from Microsoft on the link below again.
    Vista
    Next, from the Start Menu, open the Control Panel and click on Device Manager.  Next click to open DVD/CD-ROM Drives.  Right click the drive and select uninstall.  Do not delete drivers if asked.  When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ).  Let windows reinstall the drive and see if it now works.
    Let me know how you get on.
    Best wishes,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Mid 2009 MacBook Pro not reading SSD? Help

    I have bought a Kingston Hyperx SSD for my mid 2009 MacBook Pro but the laptop does not see the SSD. I have booted the SSD externally installed OSX and it boots fine on the laptop but NOT when fitted internally. Is this a firmware/software problem or is my MacBook simply not compatible with this drive? I have tried everything I can think of and the IT guy at my work has not got a clue either! ImGuessing a standard HD will work but as my old HD died I wanted to go to SSD.
    Need some help ASAP!
    Thanks!
    Sam

    The 2009 models were notorious for having faulty SATA cables and I'm betting that's the problem. Go to www.ifixit.com, find the part number for the SATA cable and search eBay for a replacement cable (ifixit simply want too much for the cable - and I've never known anyone who has received a faulty cable from anyone on eBay).
    I'm at least 95% certain that's your problem.
    Good luck,
    Clinton
    MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

  • Why won't my macbook pro not burn DVDs

    I have all the software, it allows DVD+R. But it won't burn correctly.

    What software are you using to burn a DVD? You can burn data DVDs directly from the Finder - if that will work for you then any other burning software should work as well. I use Toast Titanium and iDVD to burn DVDs (as well as Finder burns) and all work well for me.
    Clinton

  • Why my macbook pro can not read DVDs?

    when i insert dvd my macbook can not read it and considers it as blank

    1. Clean the DVD with a microfiber cloth.
    2. Clean the optical drive with a commercially available cleaning kit.
    3. Reset SMC.  http://support.apple.com/kb/HT3964
    For more info:   http://support.apple.com/kb/HT2801
    Best.

  • Install Windows 8 on macbook pro with external dvd drive

    My superdrive have broken, anyone have experience installing windows 8 on macbook pro with external dvd drive?
    Last night, I tried but end of with black screen.

    Bguzryanto wrote:
    the main point is 'anyone have exprerince install windows 8 with external dvd drive on macbook pro'
    Purchase new superdrive, takes 2-3 weeks for shipping at my city.
    It can't be done. If your computer has an internal optical drive, working or not, that is the drive you must use. Only computers such as the Macbook Pro Retina/Macbook Air that have no internal optical drive can install Windows from an external drive.

  • Loading CS5 Master Collection onto new Macbook Pro with no DVD drive

    I have a complete, legitimate, registered version of CS5 Master Collection. I also have a new Macbook Pro with no DVD drive. I have lost the disk, but have the box and confirmation email when I registered the product, with the key code. This product cost alot of money and I really need to get it onto my new machine. Can I do this without having the additional cost of a new DVD drive? I already paid for and own the software with keys so it's not like I'm trying to bend anything or do it for free. Any advice would be appreciated thank you.

    Download the CS5 Master Collection trial version from
    http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
    You must follow the Very Important Instructions on that page first otherwise the links will not work.
    Launch the trial and enter your serial number to license it.

  • Can i use my 15" macbook pro application install dvd on my new 13" macbook pro?

    can i install my15" macbook pro application install dvd on my new 13" macbook pro?

    Depending on how old that Applications DVD is you may or may not be able to use it. Give it a try.

  • I can't turn off my macbook pro not even force quit.it keeps restarting soon after i let go of button

    I can't turn off my macbook pro,not even when I try to force quit.Mid 2009 17 inch all the software up to date.Problem started 3 days ago and mac is slow to load when restarted.Please help

    Hi there nina777s,
    You may want to try resetting the PRAM and SMC on your Mac as an initial troubleshooting step. Take a look at the articles below for more information.
    About NVRAM and PRAM
    http://support.apple.com/kb/ht1379
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    -Griff W,

  • I need to totally format my macbook pro 13" mid 2009, can i use my friend's macbook pro 13's dvds?

    my macbook pro 13 is originally shipped with mac os x 10.5.7, now with 10.6.8, but i dont have the dvds with me, i also dont want any of the information on it, can i use my friend's macbook pro 13's dvds? what can i do?
    My macbook pro 13" dvds have these on them
        DVD 1: 13 inch macbook pro mac os x install dvd version 10.5.7 2Z691-6468-A Disc version 1.1
        DVD 2: 13 inch macbook pro applications install dvd disc  AHT version 3A174 disc version 1.0   2Z691-6458-A
    My friend's macbook pro 13
        DVD 1: 13 INCH MACBOOK PRO MAC OS X INSTALL DVD Mac os x version 10.6.7 Disk version 1.2
        DVD 2: 12 in macbook pro applications install dvd AHT version 3A21 Disc version 1.1
    Would my friend's dvds work to format my macbook pro to factory settings as if out of the box?
    i also had windows running on my mac, i used disc utility to erase the partition for windows, not bootcamp, so the partition is empty, i cant get the main hard drive extended as it was before because it gives me a message saying "could not modify partition map because filesystem verification failed", and when i try to verify it through disc utility it says that i need to my os x dvd and repair it, if i just format it, will that all go away?
    thank you

    Simple answer is no.
    Slightly more complicated answer;
    You may be able to boot from the disc and use Disk Utility to partition and wipe the HDD (though it may not boot at all).
    You can't install an OS from the other computer's discs. It simply will not allow the installation.
    You would also be violating the software licence agreement.
    As your originals are 10.5.x, you can buy the Snow Leopard retail installer (10.6.3) and format and install from that.
    SL retail;
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
    10.6.8 combo update;
    http://support.apple.com/kb/DL1399

Maybe you are looking for

  • Text fields in Print Module

    I was really hoping to see the ability to add text fields in the Print module.  In my work, I frequently need to add captions or titles to the prints.  At the moment, I have to round trip to Photoshop to make this happen.  I also make folios (see Bro

  • How to create a window with its own window border other than the local system window border?

    How to create a window with its own window border other than the local system window border? For example, a border: a black line with a width 1 and then a transparent line with a width 5. Further inner, it is the content pane. In JavaSE, there seems

  • Sony VRD-MC1: Rec Quality Options

    I have a Hi8 video I want to transfer to DVD. I see there are many Rec quality options. Which one of those options will give me top quality? HQ - HSP - SP - LP - SLP My final goal is to digitize all Hi8 videos into DVDs so I can transfers and edit th

  • Adding text on element 10

    I cannot add text. I followed element 10 chapter 12 instructions but cannot get past first 4 steps. When I try to commit text as per step 5 nothing appens. Anybody has a clue why? Message was edited by: 7239

  • Single-branch git clone in PKGBUILD

    I have a github repo with several branches and I want to create a package based on the master branch. In a PKGBUILD I used "git clone https://github.com/some_account/some_repo --single-branch master" to clone only the master branch and not all the ot