MacBook Pro not seeing my MBox Mini 2

I bought a new MacBook pro 2 days ago and I installed my Pro Tools software from my last laptop successfully, however the new MacBook isn't recognising my Mbox Mini 2, any ideas? Thanks

Go to the Avid / Digidesign page for support. Look into the special set-up for Macs and the special drivers that it my need for Macs.

Similar Messages

Macbook pro not seeing my sharp notevision projector . what to do

help
macbook pro cant see sharp projector. What to look for to correct?

If you have not done so already, back up your data. If your computer is under warranty, Apple will repair your computer for free. If you are near to an Apple Store, make a reservation to visit a Genius, and have your computer checked out.

New macbook pro not seeing all iPads in bretford cart

My new macbook pro running 10.9.4 and configurator 1.5 is only seeing 19 iPads in my bretford case. Other MacBooks and airs see all the iPads even running the same software. traded connecting to iPads under a new user on the mac even though its a new machine and i did not migrate still only seeing 19 of the 27 iPads . My macbook is working fine other wise and i configured my iPads in the card just in smaller sets. not sure what to do about this any suggestions would be great.

Look over the various methods of overcoming the Firewire bug on my FAQ*:
http://www.macmaps.com/firewirebug2.html
If none work, then e-mail firewire AT lacie.com for support.
- * Links to my pages may give me compensation.

Why can't my new Macbook Pro not see individual MTS files on the sony cx700 flash drive? How do I get AVCHD MTS files off the camera not using imovie or FCP?

Hi,
I bought a new MacBook Pro (OS X version 10.8) recently to replace an older version. I work with different Sony cameras (Hard drive and flash drive storage), but when I connect the cameras (Sony Cx560, 700 and XR520) to the Mac it only shows an AVCHD icon. Usually you can see the individual files. We have 3 Macbook Pro's here and on 2 of them it works. Is there a setting or a driver I need to download for this new Mac? The other ones read it without intsalling anything.
Thanks for any tips.

There are two (and probably more than two) third party apps that will do this.
1) ClipWrap
2) Voltaic

Macbook Pro not seeing my surround sound interface

I use a PreSonus Firebox interface to output surround sound from Logic 8. It worked fine on my previous computer, a standard MacBook. I recently upgraded to a MacBook Pro and it won't show up in Logic or the computer's own System Preferences. I never had a problem with it on the old computer so I'm wondering if there's any trick to get it to show up on this now one.

I see that some people earlier this year had this same problem where there was mentions of chip sets and drivers. It doesn't look like anything really was resolved, but one person said that he fixed his problem by downloading a firmware update from the PreSonus site. So I went there and tried downloading the "FireBox Mixer application and Control Panel (10.3.7 - 10.5+)" but the downloaded file is invalid and won't open. Drag.
http://discussions.apple.com/thread.jspa?threadID=2384498&start=0&tstart=0
I also wanted to add that I get all blue lights on the Firebox itself, never any red lights. So I'm still searching the internet for a solution...

MacBook Pro Not starting up, 8 min start up disk0s2 not mounted?

Hello,
I am having trouble with my 2011 MacBook Pro, runs on OS X Mountain Lion... So I left my computer on all night and it ran out of battery so this morning I charged it for a while and attempted to turn it back on..
So when I hit the power button, it went to a straight white screen, and after about 10 minutes, it took me to a start up help page with the following options:
Time up Machine Back up
Re-install Mountain Lion OS X
Get help online Apple Support
Disk Utility
I first just tried re-installing Mountain Lion, and I did, but nothing happened it still wouldnt boot up, so I did disk utility and attempted to repair my disk "Macintosh HD" and after it said it could not be repaired, to reformat it, and erase it. and then it changed to "Disk0s2" and it says its not mounted so now I don't know what to do, I tried re-installing Mountain Lion after and now it only gives me the "Recovery HD" option to install it on which isn't even possible cause it's locked...
Can someone help me??

Can you do this?
Drive Erase for Lion/Mountain Lion
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select the volume you wish to erase from the left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.

Macbook Pro not seeing other Macs on network

I have a network of 7 Macs. Some are connected with ethernet, some connect via Wifi. I have a Verizon router with a wifi transmitter and an Apple Airport Express. Both the router and the Express use the same network name. I have configured the Express to extend the first network. I use WPA security.
I have file sharing and screen sharing enabled on all of the computers.
Today a MacBook Pro (10.6.3) has had trouble seeing any of the other machines on the network. It can access the internet and send email, but it cannot access the server that has its TimeMachine backup drive, nor can I get it to see any of the other computers on the network.
I have run Repair Permissions and re-started. I recently did do the latest OS 10.6 update which updated Java. (Java for Mac OS X 10.6 Update 2)
What can I do to help this machine see the network?

Yes, every Mac is on the same subnet. This machine is behaving strangely. The inability to connect to other computers went away and now is back. It has always been able to connect to the internet, but it still cannot connect to other Macs on the network.
Would interference between the Verizon router wifi transmitter and an Apple Airport Express be a possible culprit?

I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?

I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?

Run MDP to HDMI for picture. Use a cable like this to run sound from your audio out on your Mac to your TV's audio in. That's about all you can do.

My macbook pro can see my home wi-fi network but cannot connect to it. My iphone and ipad are connected to my home wi-fi so the problem is not the modem.

Wow, I tried to submit this as a problem and the computer lost the wifi connection again, so i lost the whole explanation i typed up.
I've turned off computer and modem multiple times.
When I tried to run the network diagnostic, the macbook pro gave me a "perhaps you are out of range error". I am sitting next to the modem.
My iphone and ipad are wonderfully connected to the home wifi network, so it cannot be the modem/router, correct?
If I am on the same floor as the router/modem then the macbook pro can see my home network but after tyoing in my password and trying to connect i get a "timed out" message.
If I move down one floor, then the macbook can see and connect to the wifi. I only have one modem on one floor.
Is there some sort of diagnostic I can run to see why this particular device (macbook pro) is behaving ths way? It just seems weird because the computer could connect to the wifi network yesterday while i was sitting next to the router.

SOLUTION!
I've been suffering from this problem for a few months. I tried everything suggested by everyone, and then, today, I had a mad idea.
I used to work in a room in the house that's about 12 metres away from the router. It's on the next storey up and horizontally about 8 metres away. The problem started when I began to work in the same room as the router.
Today I became so frustrated that for some reason I walked into a room about 8 metres away on the same level - Guess what? I connected with no problem at all. Feeling full of joy I walked back to the room where the router is located - Dropped internet connection within a few minutes! Walked back to the the room that's 8 metres away and, hey presto! I have a connection. I now realise that the problem was that I moved too close to the router.
I can think of no logical explanation for my experience, but empirically it seems to work. Does anyone have the faintest idea of why this should be the case? In the absence of an answer I think I may have to start believing in fairies at the bottom of the garden - I'm just off to set a meal for them.
By the way, I don't know if it has any significance, but the router is a BT Infinity router that has replaced the incredibly unreliable Virgin Media cable connection

Macbook will not see wireless network

My new Macbook will not see my wireless network. My Windows 2000 PC, my Ipod touch and my Macbook Pro (jaguar) all see it no problem and work well with it.
I have tried entering the network name manually and it does not work. I have WEP password protection.
The macbook sees and connects to all other wireless networks I've encountered (father-in-law's house, Airport departure lounges, hotspots etc.). The macbook also sees my neighbours networks no problem.
I am confused, please help.

I am having the same issue, a friend visited with his new Mac Mini, running Leopard, and it would not see the wireless network, that 3 other macs (PowerBook G4, iBooks G4 and G3) running Tiger (10.4.11) and Windows machines recognize without problem.
I'm wondering if the issue is Leopard and 3rd party routers or MY router in particular, as I have a US Robotics 5461, and I remember when a previous roommate replaced her G4 iBook, running Tiger, with a MacBook Intel running Leopard, she also had issues connecting wirelessly.
My friend's Mini had no problem recognizing all the neighbors networks (at least 4 or 5) and I'm pretty sure they are not Mac users with an Airport Base Station.
I was hoping to upgrade my G4 PowerBook (once I get it repaired) to Leopard in the future, but I don't want to lose the ability to connect to my wireless network.
Has anyone running Leopard run into this problem and found a solution?

Have...macbook pro, 10.5.1, need min Win OS, which one should i purchase?

which windows OS should i install on my memory maxed MacBook PRO laptop? Want the min memory, min $$ spent but need to make sure i can access web sites with internet explorer. Don't need to run games, run applications except for IE.
I'm a realtor and the sites i need to get info from require internet explorer. Firefox and safari are not compatible. I already called these sites and they said the data they return to the website was written for IE and not safari or firefox. These are must go to sites and i figure the best way to access them is to run boot camp, download a window OS. BUT....
I only want the minimum windows OS to save $$$ and memory. I'm already using 70G of 80G. I plan to buy an external and move photo's and movies over before i install windows. Also, I know i need to vista or xp with service pac 2.
But, which Windows OS is best for minimal conflicts but also buying the OS that takes the smallest amount of memory.? Only want to access web sites and see spreadsheet data only available on IE. Not using windows for any other applications or uses.
Thanks in advance
Any

Hi and welcome to Discussions,
with waht you want to do in Windows and with your MacBook Pro a 32-bit OEM version of either Windows XP Home with Service-Pack 2 or Vista Home Premium would be sufficient.
Although these versions might not let you use the full amount of RAM installed in your MBP, but rather something between 2GB and 3.5GB, that shouldn't be of much concern to you, since the IE (and other Office programs) are not that much RAM-hungry.
Regards
Stefan

How to get 2013 MacBook Pro to see iPhone 5c in iTunes?

how to get 2013 MacBook Pro to see iPhone 5c in iTunes?

Try the steps in the article below:
iOS: Device not recognized in iTunes for OS X

New iMac as second display for MacBook Pro not working

I just bought the new thin 2012 27" iMac as a replacement to the last model I had.
I want to use the iMac as a second display for my 2012 MacBook Pro.
I have a Mini Display Port to Mini Display Port cable that used to work with my previous setup and at work with my external display.
However, this isn't working on the new iMac. When I try the Command + F2 suggestion I've seen in the forums here. Nothing happens.
Do I need a new cable now that these are "thunderbolt" connections?
Any help is greatly appreciated.
Thanks.
Demetre

You will most likely need a Thunderbolt cable as they are both Thunderbolt devices and not Mini DisplayPort.

HT5299 My MacBook Pro doesn't have a mini DisplayPort

My MacBook Pro doesn't have a mini DisplayPort what can I do so that I can use my Cinema Display?

You have a Dual-link DVI port. Try Monoprice to see if they might have an adapter.
Clinton

Why will macbook pro not go to sleep with Lion OS?

Why will macbook pro not go to sleep with Lion OS?

Test after each of the following steps that you haven’t already tried:
Step 1
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter ▹ Wake for network access: uncheck. You may need to unlock the preference pane by clicking the lock icon in the lower left corner and entering your administrator password.
Step 2
 ▹ System Preferences ▹ Energy Saver ▹ Schedule… ▹ Start up or wake: uncheck
Step 3
 ▹ System Preferences ▹ Print & Scan ▹ Open Print Queue...
Check all printers for unfinished jobs. Deal with any you find.
Step 4
Disconnect all wired peripherals except keyboard, mouse or trackball, and monitor, if applicable.
Step 5
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select All Processes from the menu in the toolbar, if not already selected. Enter “powerd” (without the quotes) in the "Filter" text field. Select the powerd process and click the Quit Process button in the toobar (stop-sign icon.) In the sheet that opens, click Force Quit. You’ll be prompted for your administrator password. The process will be relaunched immediately.
Step 6
Boot in safe mode and log in. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the Mac OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
If sleep now works as expected, go on to the next step.
Step 7
Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
Step 8
If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
If you still have the sleep issue after booting out of safe mode, post again.

MacBook Pro not seeing my MBox Mini 2

Similar Messages

Maybe you are looking for