MacBook Pro Not turning on, loud fan

My friends 13in MacBook Pro won't turn on. The light on the bottom near the remote reciever is on and there is a very loud fan noise.

If the light is on and the fan is running then the system is on, even though you can't see anythinig on the screen.
Press and hold down the power button for 5-10 seconds to shut the system down. Once that light goes off and the fans stop spinning try to start it again by just pressing the power button once. If you get the startup chime and something on the screen then it might be ok and it was just hunge. If there is nothing on the screen and it doesn't give the startup chime thenn the system needs to be taken to apple to be looked at and diagnosed as to the problems with it.

Similar Messages

  • MacBook Pro wont turn on; But fan is spinning?

    MacBook Pro wont turn on; But fan is spinning
    Already tried reseting the
    p-ram
    SMC
    Removing the:
    ram
    battery
    hard drive
    MacBook Pro 13in- 2010

    your screen may be broken connect an external monitor. 

  • Macbook pro not turning on after SMC reset. I have the following problem. Yesterday I noticed that my mbp 2011does not sleep when closing the screen. smc due loud fan and an X on battery symbol

    Yesterday I noticed that my mbp 2011 dos not sleep when closing the screen cover. Today I Turner my laptop in. However the fan was working loudly and stayed loud. After Start I noticed an X on Battery symbol. Clicking on it, it showed 'no battery.' I found out that a potential solution for this problem was SMC reset. I also noticed that the leds on magsafe was not lightning. Despite this I tried to execute the smc reset as described on apple support site. Switching off, plugin the magsafe connector, pushed the buttons shift + alt+ ctrl + power. Then i pushed the power button, but my mbp is not turning on. I pushed several times on the power button but nothing works. The magsafe is also dark meaning the leds not lightning. Can anyone here help me on this ?

    Problem solved by my own. But do not how :) magsafe again working and the laptop tooo

  • Help! MacBook Pro not turning on...

    Last night I left my macbook pro on (not in sleep mode) I set for the display to turn off at after about 1 hour 30 min. This morning (8/30/2010)when I went to use it the display wouldn't turn on. I had to restart. When I went to turn it on I got 3 loud beeps and a blinking light... What should I do?

    Remove and then reinsert your RAM modules, making sure they are firmly seated in their slots.
    If you are in the habit of picking your MBP up one-handed, break the habit. Pick it up only with two hands on opposite sides. Picking it up one-handed unavoidably flexes the chassis and can unseat your RAM, as well as possibly bending the case irreparably.

  • Macbook pro not turning on, not charging

    Its a 13 inch macbook pro. Was working fine till about last night.
    Today morning, it didn't turn on.
    I plugged it to the charger - the indicator had a faint green light, dimmer than usual, that never turned orange.
    Even the battery indicator on the side is not showing anything. Its like the laptop is totally dead.
    I don't think its a problem with the charger because as far as I remember , it had about 70% charge last night. but today, its just not turning on!!
    My one year warranty got over about 10 days ago, so yes, I am panicking because this looks like a serious problem.
    Any help?

    If the SMC reset as linked above doesn't work for you, try the following...
    Make sure power adapter is removed.
    Remove the bottom cover of the MacBook Pro (take note where the three long screws go).
    Locate the power connector cable for the 'non-removable' battery (next to the memory modules).
    Preferably using a small flat tool such as a small flat screwdriver or such, carefully pry the connector upwards by its edges until it comes off.
    After a brief pause, reconnect the battery connector. This may cause the system to start up and fans etc. to activate.
    Check to see if the screen is on and indicating startup and also press battery indicator button on the side to verify that the indicators light up.
    * If the system starts up normally, you can shut it down, replace the bottom cover, attach and plug in power adapter, verify the charge indicator lights up and perform the SMC RESET as linked In the above post for models with battery you cannot remove yourself and as I describe below.
    * If the screen has not come on during the 'startup activity' then hold down the power button to force shutdown.  Replace bottom cover, attach power adapter and verIfy charge IndIcator lIghts up, THEN perform the SMC RESET (Hold down left side SHIFT-CONTROL-OPTION keys whilst simultaneously pressing Power button for a few seconds, then release them together). Then press power button again to start the system and check normal operation. You MAY have to reset date and time.
    Hope this helps and saves a trip to the Genius Bar.

  • Macbook pro running slow with loud fan

    Hi,
    I have my macbook pro for about 2 years now, and in the last couple of months it started running slow, and the fan gets really loud even immediately after startup.
    I ran the disk utility, clean my mac, and disk inventory, and I deleted large files. I have about 35GB free (out of 250GB). I use CS5 and Parallels Desktop, which I thought were the reason for making it so slow, but I usually quit whenever I'm not using them.
    I checked the console and I found repeating messages about Chrome. It's the one application that's always open... so I guess it might have something to do with it..?
    Here's the message:
    5/2/11 10:43:28 AM [0x0-0x92092].com.google.Chrome[1117] /Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder: open() failed with errno=1
    5/2/11 10:43:28 AM [0x0-0x92092].com.google.Chrome[1117] 2011-02-05 10:43:28.263 Google Chrome Helper[1133:107] Error loading /Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder: dlopen(/Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder, 262): no suitable image found. Did find:
    Any idea what's wrong and how to fix it?
    Thanks!

    Welcome to Apple Discussions!
    Your drive is still pretty full so that could still be a factor. You want 15%-20% free space for the OS to work well.
    Open Activity Monitor and see if you have some process hogging the CPU. Be sure to select "All Processes" at the top. If you find a rogue process that is doing that, see if you can quit it. It may even be Chrome, and if it is, quit it and relaunch it. If it does the same thing again, you may want to trash it and reinstall it fresh.
    Good luck!

  • AirPort in MacBook Pro not turning on!

    So recently i had many a problem with my built in airport. here's the story...
    I have a MackBook Pro and ive been hearing many problems such as mine but nothing as specific. My airport has for some time now not been able to connect to any device nor "internet share" to anything as well. I use to be able to send files through it very quickly but now as soon as i turn it on it looks and looks for a port. ive been trying to connect to my brothers macbook and my friends macbook pro. everytime i get about 2 seconds connected then it drops off and never can get back on unless i turn off airport then back on. and for what i can tell i cant connect to any wifi anymore for any amount of time longer than that. my school also has a new wifi setup and my computer has done the same with that.
    now with sharing internet my internet has the same symptoms but with the device. the ipod touch connects to it for a few seconds and then BAM its off.
    Like Ive said, Ive tried many cures- I reset the .plist for airport, login items, PRAM reset, different setting configurations... the only luck i hear is that Apple may have an update fix for it but who knows when!
    after that whole mess i tried to do a reinstall and archive my stuff i have on here.
    as soon as i got back to my desctop i tried turning it on and nothing would happen. i thought maybe its because my software updates needed to be reinstalled. did that. same thing wont turn on!
    when i go into diagnostics for the airport it says...
    AirPort
    failed
    AirPort Settings
    failed
    Network Settings
    failed
    this is my ruin!
    If you can help me out at all it would be SUPERB because its killing me.

    Diagnostic testing is free at Apple store. But you have to pay for the repair.
    Did you try resetting SMC?
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Macbook Pro not turning on and having no responses

    Hi there.
    I recently bought a macbook pro, I had been having trouble with my internet connections then when I finally have it sorted out the computer just turned off out of the blue.   I've tried researching and using the troubleshooting methods i've found online but they dont seem to be having any response.  I have the charger plugged in and its flickering a light green.  I'm really unsure of what to do, If anyone has any idea of what could be wrong with it please let me know or know of another way to troubleshoot it?

    If the Mac gives no response at all and the pilot light on the charger cable is flickering, there might not be enough power in the battery and the charger not getting any across. What do the battery charge indicator lights show? See http://support.apple.com/kb/HT3205
    If there's an issue with the battery and/or the charger, you will have to take the Mac to an Apple Store or Service Provider for further diagnosis and resolution.

  • MacBook Pro Not Turning On / Green Light

    Hi,
    I have a Mid-2010 MacBook Pro 13", which has been my trusty machine for the past five years. It's been a fantastic machine.
    Recently, it began losing the time, and shutting off on it's own. Yesterday, it simply gave up, shut off, and that was the last time I was able to turn it on. Since that, I've been unable to turn it on.
    When pressing the power button, the charger light goes green (it was previously orange). The battery indicator light shows as charging.
    Has anybody any ideas as to how I could fix it? Missing my Mac!
    Many thanks,
    George

    Greetings CreativeCoding,
    It seems your MacBook Pro will not power on. Based on the information you have provided, it appears your MacBook Pro needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    Apple - Support - Service Answer Center 
    Thank you for contributing to Apple Support Communities.
    Best,
    Bobby_D

  • Macbook Pro not turning on fully

    This just started happening today. I turned on my macbook, the usual happened...the blue screen, the apple logo, and then the circle appeared to show that it is loading. Well, after some seconds the circle stops moving and I guess the computer basically freezes. Therefore, my computer will not turn on fully. I've shut it off and tried countless times. I took the battery out and put it back in and tried again. Still nothing...
    I don't know the OS, because I can't remember and that information is stored in the computer. All I know is I got this macbook pro in 2007. If anyone can please help I would appreciate it. I have no idea what to do and couldn't find a number to call or anything.

    I did the safe boot and it worked! Thanks! But now I'm scared to shut it down again. Does this fully fix the problem or could it happen again?

  • MacBook Pro Not Turning On Issues.

    Bought a 13" MacBook Pro at the beginning of September and everything has been fine until today.  I closed the lid (putting it to sleep), before trying to turn it on around 2 and a half hours later, getting no response.  I thought it was the battery that had run down, but when I plugged in the power cord the led was changing from a dull green and yellow.  The battery LED indicator is not showing any LED's when pressed.
    I'm taking it into my local Apple Store tomorrow, but was wondering if anyone could give me a heads-up before then?
    Cheers.

    Reset the SMC
    "The MagSafe power adaptor LED doesn't appear to indicate the correct activity."
    https://support.apple.com/kb/HT3964
    https://support.apple.com/kb/ts1713
    https://discussions.apple.com/message/16276201#16276201

  • Macbook Pro not turning on, Power button unresponsive

    Now, Lets me explain the situation. Our High School issued Macbook Pros as part of some kind of project to boost learning standards, And they let us keep them over the holidays. My friend contacted me an hour ago telling me his was not turning on, We tried resetting the SMC but to no avail. He says that when the chargers plugged in he can only faintly see the little green light, Any help in this matter would be great. If you guys need any more info on the problem, post the question and ill get an answer from my friend.
    Thankyou for your time.

    OK, this may sound stupid, but bear with me here, because I'm talking from experience: is your friend sure he's connected the power cord to the power adapter socket on his Mac, and not the adjoining USB port...? Happened to me once, and sure enough, the green light did show, but faintly.

  • Macbook Pro not turning on... dead?

    Hi my macbook pro stopped working. It is not turning on.
    This is what happens:
    I press the power button. I hear the cd drive start up. I let go the power button. Within less than a second, I hear the hard drive power down and my laptop does not go on. Nothing comes up on the screen, not even the gray startup screen.
    If I try to hold it longer, it does the same thing.
    The only different scenario is when I hold down the power button until it starts up and shuts down, which does not do anything either.
    Please help me.
    I have done everything on this page (http://support.apple.com/kb/TS1365) except carry it to apple. I have even tried booting it from the restore DVD but nothing happened and it is now stuck in the laptop.

    Well, this is all rather unsatisfactory. Yesterday I had a very polite and understanding member of the support-team on the phone, and after relaying the story and the symptoms of my dead MBP, and after checking with some superiours in the backgrond, he gave me a case-number and fixed me a date with the local apple store's genius bar, saying that the symptoms match what they have in their database regarding the graphic-chip failure and that my case will be dealt with at the genius bar - leaving me with the impression that the MBPs failure will be covered by the prolonged warranty.
    so guess what? the genius at the bar did exactly the same what the AASP tech did on friday (traying to get a errorcode out of the dead machine), and he, too, stated that "if the book is that dead, it cannot be the graphic chip, sorry" - a statement that, in the words of the support-member "is not acceptable" - as long as it is not muttered by an official apple genius, it seems. He went to get a second opinion by a fellow genius who said, after looking at the data filed along with the case-number: "well, you're nearly three year's out of the warranty..." (which is wrong, I'm 614 days out of the warranty, which was the first thing I got told upon my second phone call with the service today) - so how dare I to complain about a premature death of a top-of-the-line product?!
    Fuming. Not only do I have the dead MBP, but I had been sent on a fruitless journey by yesterday's support member.
    I have always told everybody who would listen how reliable and stress-free apple's products are, and considering that this is the first really broken peace of hardware I encountered in the course of 17 years I will continue to do so, but this story is really really bad.

  • HT3964 MacBook Pro not turning on

    My MacBook Pro is not turning on, It turns on to white screen with apple logo and loading bar below it doesn't do nothing after. I bought this computer dec 2011 and hardly used it since.  Last time used it 2 months ago and it was working fine.

    Is the machine fully charged up?
    Do a #1 SMC Reset and connect the power to a line in the walls that doesn't have a lot of other outlets and other things plugged into it so your getting the maximum power possible overnight.
    https://support.apple.com/kb/HT3964?viewlocale=en_US&locale=en_US
    It appears your machine is booting, the white screen and spinning thingy is what occurs if OS X can't boot up, the gray progress bar is what occurs at boot is the fsck drive check and if it stops and doesn't continue means it can't fix the problem with the drive.
    It might ran out of power, why I say to charge it up fully and do the SMC reset which will fix the setting if the battery really isn't charged up, but the machine thinks it is.
    White screen and spinny, gray bar that stops, could be something wrong with the file structure on the drive.
    Run through this list of fixes, including doing a Hardware Check and Repair Disk in Disk Utility, look for the SMART status.
    ..Step by Step to fix your Mac
    If you can't get it to work despite methodically working through  those repair options, then scheduale a appointment with Apple.

  • Water damaged macbook pro not turning on

    My macbook pro got wet this morning, the ports were a bit wet and after I cleaned off the water it turned on and worked fine. Now, a few hours later it fill not turn on, I have tried everything!!!!!!! Please help me, please?!?!?!?! It had an incipio feather light case on, which may have trapped some of the water.

    Let it sit, powered off, out of the case, for at least a day. And hope.

Maybe you are looking for

  • IQ512UK and Windows 7

    I have been in contact with HP for several months regarding upgrading to Windows 7 and have beed assured that it will work fine. Having bought a brand new copy of the OS, I installed it on a partition of my drive which I dedicated to Windows 7, keepi

  • Lock data in sap from portal

    Hi, I would like to lock record in sap from portal.  I'm using function HR_ENQUEUE_OBJECT but it not function properly in portal.  Kindly help me on this.  Thanks.

  • Getting a video clip onto my iPod

    I am having a bit of trouble transferring a video clip from a folder to the iTunes library, thus I cannot seem to get it onto my iPod Video. I've tried the "add file/folder" on iTunes itself and don't know of any other way to transfer a file into iTu

  • Quicktime / Flip4Mac crash that also crashes Safari!

    Hi, I have an irritating problem. Every time I visit this site: www.ynet.co.il (this is the top israeli daily news site) my Safari crashes. When I disable "Plug-ins" in Safari preferences it does NOT crash. Then I started looking around and I found t

  • '&' character and BI Publisher Intergration

    Just wanted to post this for others when they start using BI Publisher and APEX.. I have a number of reports in APEX that we are using BI Publisher to produce printed output. In one of the reports I had a & in the region title in APEX. When BI Publis