Macbook Pro only middle and sides illuminated

Hey guys!
Hopefully this won't be as bad as it has seemed from a simple Google search.
So I have my backlight for my laptop on the highest setting and only the middle keys "67tyghbn" and the side keys and most of the numbers are lit correctly but keys such as "ersdfxcv" and "iopjkl;m,./" are lit very dimly.
Now, my brother was handing me some soda and my hand wasn't fully on it so he dropped a bit on my keyboard, but it wasn't on both sides of my keyboard, maybe even only the shift, enter and the arrow keys. The soda got nowhere near the other side of the keyboard which also decided to dim. I was wondering if this is the cause? Is there a way to fix it? Is this usual for a macbook pro's backlight to go dim in this fashion ?
I got my macbook pro in January of this year.

It's impossible to tell if the soda damaged it however if any got inside the machine it invalidated your warranty and you will have to pay for the repair out of pocket. You can try to do a SMC and PRAM reset however if those don't help I believe a repair is the only solution. You will need to take it to an AASP for an estimate though. Here are instructions for the resets:
_SMC RESET_
• Shut down the computer.
• Unplug the computer's power cord and all peripherals.
• Press and hold the power button for 5 seconds.
• Release the power button.
• Attach the computers power cable.
• Press the power button to turn on the computer.
_PRAM RESET_
• Shut down the computer.
• Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
• Turn on the computer.
• Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
• Hold the keys down until the computer restarts and you hear the startup sound for the second time.
• Release the keys.

Similar Messages

Recently I was working on my home Network and lost my Password for my Home wireless connection. After many attempts, I remembered the password and was able to get in. Now the MacBook Pro only works at home on a Hard wire connection. I have an additional 9

Recently I was working on my home Network and lost myPassword for my Home wireless connection. After many attempts, I remembered thepassword and was able to get in. Now the MacBook Pro only works at home on aHard wire connection. I have an additional 9 devices on the same network, allare functioning properly. The Air connection works fine at any other Networksout side the Home connection. I did a PRAM reset, deleted the Network profileand rebuilt in System Preferences. Still unable to connect wireless on Homenetwork. Any Ideas?

I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?

Why does the iCal app on my MacBook Pro only have a 2-year archive? Where did everything before that go? And can I get it back?

I use my iCal as a daybook and every now and again need to reference events or occurences from several years ago. I tried to look something up from back in 2010 and the iCal on my MacBook Pro only has iCal data from Jan 1, 2011 onwards. Everything I've put in prior to that seems to have disappeared! I can't find anything under preferences that mentions archiving/storage. Can I change the setting so that this info is kept forever? And can I get my previous info back?

You can only sync with one computer. When you synced to the new computer it would have erased it and synced what was on the new computer.
You always need to have a backup, an iPhone is not a storage device.
When you get a new computer you need to transfer your library before syncing
If you don't have a backup you may be out of luck
The only thing would be if you're in the US and have access to the iCloud beta to reload purchases
http://support.apple.com/kb/ht2519

I have backed my iTunes with over 10,000 songs on a hard drive and than i reset my computer to factory settings, when i put it back on my macbook pro only 2030 were able to be downloaded back to the same computer

i have backed my iTunes with over 10,000 songs on a hard drive and than i reset my computer to factory settings because my email was hacked, when i downloaded the music back to my macbook pro only 2030 were able to be downloaded . how can i download all my music back?
michel p.

I usually err on the sideof caution when someone says "downloaded" and take it to mean anything fro actually downloaded, to copies, to imported, to moved (frolder to folder), but even if they were "downloaded"... if the old email was hacked, and subseuqently closed out, that leaves the downloaded files "orphaned" if you will, belonging to the old ID. So, while they may be on the HD, they're inaccessible now.
One of the biggest reasons I NEVER keep anything in my library with DRM employed in it. I bought it. I own it. I'm not going to get locked out of it.

HT4279 I have a Macbook Pro (late 2012) and I would like to connect it to 2 screens simultaneously (1 screen is a TV and can only take HDMI, the other is a larger computer screen and has both VGA and HDMI connections). How can I do this?

I have a Macbook Pro (late 2012) and I would like to connect it to 2 screens simultaneously (1 screen is a TV and can only take HDMI, the other is a larger computer screen and has both VGA and HDMI connections). How can I do this?

The article you cited refers to The Mac Pro, a 50lb silver tower -- not a notebook computer.
Everymac.com says:
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600 (x2*)
Details:
*This model supports a simultaneous maximum resolution up to 2560x1600 on two external displays via Thunderbolt. Alternately, it can support a single display up to 2560x1600 via Thunderbolt and a single display up to 1920x1200 via HDMI. Although it can theoretically power all three external displays, as confirmed by a helpful reader, it runs too hot with three displays connected.
Also see: How many external displays can the Retina Display MacBook Pro models support? What is the maximum supported resolution of each? Are adapters required?
When using other than ThunderBolt displays, the ThunderBolt port is directly compatible with Mini DisplayPort, and can be forced into compatibility (with Single-Link DVI or HDMI up to 1920 wide) with a simple adapter.
To adapt to wider displays, an ACTIVE Dual-Link adapter is needed, about US$100.

Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

Hi Winterwilly,
Welcome to Apple Support Communities.
The article linked below answers your question of how to use QuickTime to record something on your MacBook Pro’s screen.
QuickTime Player 10.x: Record your computer’s screen
Cheers,
-Jason

I have macbook pro 2012 retina right side usb and mmc doesnt detect at all when i plug pen drive or mmc.....please solution

i have macbook pro 2012 retina
right side usb and mmc doesnt detect at all when i plug pen drive or mmc.....please solution

I do know that for new MBPs there is a no questions asked return policy if returned within 14 days of purchase. I am not certain if that applies for peripherals. If you have not damaged it, I would think that the odds are on your side if you return it for a refund. Obviously you have a good reason for the return.
Then it may be a good reason to purchase a new MBP. In any event, call the store and ask.
Ciao.

My MacBook Pro is crashing and Mac OS stops working sometimes so I have to restart it. And sometimes it stays on the first white-ish screen with the Apple and won't start further. What to do?

my MacBook Pro is crashing and Mac OS stops working sometimes so I have to restart it. And sometimes it stays on the first white-ish screen with the Apple and won't start further.
What to do?
Does that mean that the is the end of my Mac Book 5bought in the summer of 2009) ? Or is there someting to do to fix it?
Thanks
V

Try this:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

My macbook pro screen brightness and keyboard brightness inop.

My macbook pro screen brightness and keyboard brightness inop. Also it does not wake up most of the time if off the charger for several hours or more. Never a waking problem when plugged in. I think I am still und

Tried a pram reset?
http://support.apple.com/kb/HT1379?viewlocale=en_US (altough I doubt this might affect this issue, it can't hurt)
Have you tried a Safe boot? Left side SHIFT at power up, hold till you see the progress bar then release and allow to finish booting,. (note this will take longer that usual) Thsi will disable 3rd party software/extensions. Login and see if the issue still persists, if not logout and boot normally.
Another thing you can try is creating a test account and see if it has the same issue there, this will help determine if it is related only to your account.
Also check About this Mac (Apple logo) option, system information, power in the left side bar and check the battery info.
If you have already tried these steps, you should include what you have already tried so people will not offer redundant suggestions.
If you still are having issues, it looked as though you were typing that you thoght you may still be under warrany, if so you may want to take it in and have it checked out, as there the keyboard/screen issues along with the no wake on battery, it may be related to a battery problem?
You can check warranty status by going here and entering your serial number.
https://selfsolve.apple.com/agreementWarrantyDynamic.do

Brand new Macbook Pro keeps crashing and restarting - Mavericks

Hey guys, I just got a new Macbook Pro on Monday and my first time turning it on it was perfect, the next day I turned it on and kept crashing and "Restarting due to a problem", it wouldn't even make to to the log in page. Every time I power it up now I get the same issue over and over, once I make it passed the log in it is usually fine but does crash sometimes randomly but not much.
I have read here that updating to Mavericks has caused this problem but surely when it came with it and is less than a week old it should be fine? (I'm confused as to why the report says my Mac is Mid 2012, I just bought it!!) Also the only software I have installed is Microsoft Office. I do have Silverlight Plug in installed for Netflix which I read can be an issue with Mavericks.
I downloaded EtreCheck and this is the report I have. Please any help will be great!
Hardware Information:
          MacBook Pro (13-inch, Mid 2012)
          MacBook Pro - model: MacBookPro9,2
          1 2.9 GHz Intel Core i7 CPU: 2 cores
          8 GB RAM
Video Information:
          Intel HD Graphics 4000 - VRAM: 1024 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 0:20:26
Disk Information:
          APPLE HDD ST500LM012 disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 499.25 GB (469.68 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          HL-DT-ST DVDRW GS41N
USB Information:
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Computer, Inc. IR Receiver
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. FaceTime HD Camera (Built-in)
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
User Launch Agents:
User Login Items:
          iTunesHelper
3rd Party Preference Panes:
          Flash Player
Internet Plug-ins::
          SharePointBrowserPlugin: Version: 14.0.0
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
          Flash Player: Version: 11.9.900.170 - SDK 10.6
          QuickTime Plugin: Version: 7.7.3
          Silverlight: Version: 5.1.20913.0 - SDK 10.6
          Default Browser: Version: 537 - SDK 10.9
Bad Fonts:
          None
Old applications:
          SLLauncher:          Version: 1.0 - SDK 10.5
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               3%          WindowServer
               1%          EtreCheck
               0%          firefox
               0%          hidd
               0%          coreservicesd
Top Processes by Memory:
          303 MB          firefox
          57 MB          mds_stores
          41 MB          Finder
          33 MB          Dock
          33 MB          WindowServer
Virtual Memory Statistics:
          5.80 GB          Free RAM
          1.16 GB          Active RAM
          223 MB          Inactive RAM
          844 MB          Wired RAM
          206 MB          Page-ins
          0 B          Page-outs

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Is it possible to virtually bypass the battery on a macbook pro (retina 2014) and power the mac directly via AC power?

Is it possible to virtually bypass the battery on a macbook pro (retina 2014) and power the mac directly via AC power?
E.g. Dell allows you to plug the laptop into AC power but prevent battery charging.
Note: I do not want to physically remove the battery.
If there isn't an option on Mac OS, is there anything I can download to bypass the battery when I want?

Thanks for linking me! Wow I had no idea the clock speed would be cut so severely! What a bunch of rubbish, as if the AC won't provide enough power!
I guess the only solution to my question would be an app which virtually disconnects the battery but tricks the mac into thinking the battery is still connected. I'm just surprised Apple haven't yet started to build prisons for the government - considering how well they lock up their software and hardware!

HT1420 I have 5 computers already authorized with my Apple ID. How can I add one more. My home has 1 IMAC, 2 Macbook Pros, 1 Ipad and 2 Iphones. Why are you now limiting me to five computers on my Apple ID when I am clearly an Apple product supporter.

I have six products in my home. I can only authorize five using my Apple ID. All my products are Apple - 1 IMAC, 2 MacBook Pros, 2 Iphones and 1 IPAD. This doesn't seem right - We are so Mac'd out in our home and yet we are now being limited to the number of products we can have using the same Apple ID. Any advice as to how to find a workable soliution to this?
Thanks

Authorise Only Applies to Computers... Not Devices...
You state you have 1 IMAC, 2 MacBook Pros, ... this = 3 Computers... you can Authorise up to 5 computers.
See Here for full details...
About authorization and deauthorization
For Devices...
See Here...
iTunes Store: Associating a device or computer to your Apple ID

Design Limitation On ALL Santa Rosa MacBook Pros, 2.2 and 2.4 GHz

While searching the Internet for answers to my new $2500.00 MBP headphone (output jack) has audible hissing sounds I found several posts on Macrumors.com and macintouch.com to explain the design Limitation/Problem. To summarize:
The Problem
The issue has three components, as described in this MacinTouch Report:
- A low hiss that is constant whenever the audio circuitry is on
- Static that occurs whenever anything is playing... even something quiet.
- A series of high-pitched noises that occur somewhat randomly. The best comparison I've seen is that it's like listening to those hearing tests where you raise your hand when you hear a tone.
The problem only occurs with low-impedance headphones (more on this below).
Some Facts
- The problem occurs on ALL Santa Rosa MacBook Pros, 2.2 and 2.4 GHz. It is a design flaw on Apple's part, and returning your machine for a new one will not help. There are plenty of people who say they can't hear the noise, but those people either have high-impedance headphones or speakers, or just don't have very good hearing.
- Only Santa Rosa MacBook Pros seem to be affected by this particular static problem. I've seen some reports of other machines having audio issues, but they are always different.
- The 'Audio Update 2007-001' that Apple released about two weeks ago doesn't fix it. It does fix a popping problem on all Intel Macs (including the SR MBPs), so it's worth installing, but that is a different problem than this one.
- It does seem to be an Apple-specific problem; I've been unable to find any other reports of non-Apple Santa Rosa notebooks having the same problem.
Just wondering if anyone else has had this issue with their new MBP?
Thanks,
B

I experience the issue as well both in OS X and when I'm in Windows Vista.
Whenever a program uses audio, there is an annoying high-pitched hissing noise from the built-in speakers.
Of course the severity of the problem depends on the individual hearing ability, but everyone I have asked, have been able to hear the noise.
Apple is known to be the first choice of audio professionals; however this problem is below that standard.

I tried to airdrop Civilization V from a Macbook Pro with Mountain Lion to a Macbook Pro with Lion and it doesn't work. Other apps have but Civ V has not.

I tried to airdrop Civilization V from a Macbook Pro with Mountain Lion to a Macbook Pro with Lion and it doesn't work. Other apps have but Civ V has not.

Likely because it's a not self contained and/or it's game and copy protected, so install it via the developers instructions instead, which likely means it will have ot be uninstalled off the first machine, the developer contacted for a new license key before installing on the newer machine.
If you want it on both machines, you will need to likely buy another license.
Most developers are fine with transfering license between machines, you have to contact them.
They just want to make sure it's only on one machine so they are not getting robbed.

I bought a macbook pro from someone and want to clear all of the past persons stuff, how can I do that without a cd? specs macbook pro 8.1 with OS 10.6.6. early 2011 model. please help...

I have a macbook pro i bought from someone and I need to clear all this other persons info, i don't have a the cd by the way so thats the challenge I'm against. its a early 2011 macbook pro 8.1 and it has 10.6.6 snow leopard on it and i would like to get it to mountain lion but didn't know if downloading that would clear the memory as well? any ideas?...

1: Backup any data off the machine. Download the free MacTracker
2: Apple menu > About this Mac > More Info > Macbook Pro 3,1 or like model number, punch it into Mactracker.
3: Find out what OS X version came originally on your machine. how far you can go.
Things to consider before upgrading OS X
4: Inexpensive. $ If < 10.6.3, then order the 10.6.3 disks by calling Apple via phone.
5: More money $$. If > 10.6.2 then call Apple ia phone for the machine specific versions as the 10.6.3 retail version won't work.
6: Follow these links to wipe and install
How do I securely delete data from the machine?
How to erase and install Snow Leopard 10.6
7: Run Software update to get to 10.6.8
8: Check hardware requirements for 10.7 or 10.8 using MacTracker , install more RAM if need be. $$$$.
9: Optional, more $$$. Run AppStore and install 10.8, or call Apple for 10.7 (better stay on 10.6 if 10.7 is the best you can do)
Must follow about using the disks to wipe the machine of previous owners data squirreled all over the thing.
Only thing "free" is the advice.

Macbook Pro only middle and sides illuminated

Similar Messages

Maybe you are looking for