MacBook Pro OS X install to new HDD
Total Mac noobie here (thanks for your patience)
I got my hands on 13" MacBook Pro and decided to upgrade it with ssd.
So fresh install to Mac that had been used for about 2 years.
I have the original grey disc that says Mac OS Version 10.6.7 (disc version 1.2)
So the first message I got was that Mac OS X cannot be installed to this computer (or something)
After some Googling I found the instructions how to partition and what selection should should be used:
GUID and formatted it Mac OS Extended, Journaled.
No luck.
This shouldn't be this hard, right?
If previous owner updated firmware, can it somehow conflict with my attempts to install original OS X version?
Thanks for any suggestions
Thank you for your reply!
Yeah did that in that order and got the same error message.
Because I'm such a noob I took my MBP to someone who knows these things, someone authorized
And it turned out that somebody had messed up in inventory and discs that was claimed to be sold with this computer apparently wasnt the ones since the guy said that licence in my MBP is 10.5.x and the discs were 10.6.x. To this date I have not been able to find the original discs that would state MAC OS X 10.5.x in them.
If someone could briefly explain: does the computer have a licence permanently marked to its insides or what?
Anyway got things sorted, got MBP back with 10.6.7 (i guess). Tried to install boot camp and it was hung up on partitioning, I had to leave it on overnight. In the morning I had to cut the power to get it to wake up and now it says that the hdd is full (checked with whatsize, couldn't find anything). Its like boot camp made the partition or reservation for partition but never made the actual partitioning.
Now I'm stuck where I should repair hdd with installation disc that I apparently dont have. I have other installation disc that lets me to enter the disk utilities but I might end up to a situation where I do not have working installation disc nor working MBP.
What a nightmare, please wake me up.
Thanks
Similar Messages
-
MacBook Pro 2012 won't recognize new HDD
So my 2012 model macbook pro needs a new hard drive. I created a restore key for mavericks (my OS), installed a new hard drive and restarted.
I can boot from the Recovery key no problem and I get the Install Mac, disk utility options etc.
However when trying to format the new hard drive it won't show in the list.
The old hard drive shows up in disk utility so its not the connector.
Any thoughts?
Thanks in advance
Rod.Isadiohc,
your Mid 2012 MacBook Pro didn’t come with an installation disc, so that’s of no concern.
If you reïnstall your Hitachi HDD, you could try the following steps to see if they would repair it: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, select the First Aid tab if it’s not already selected, then press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get past the grey folder with the flashing question mark now?
There’s a chance that your internal SATA cable is faulty, but there’s no firm evidence yet that that’s the cause of the problem. Do you have access to another Mac? If so, buy a SATA-to-USB adapter (they’re not expensive), and try connecting your SSD externally to the other Mac, running Disk Utility there to reformat your SSD. Once it’s been reformatted, try reïnstalling it in your MacBook Pro to see if OS X Internet Recovery will properly download your MacBook Pro’s original version of OS X from Apple’s servers. -
Strange behaviors on MacBook Pro before & after installing SL & new battery
I have also posted this question in the Snow Leopard forum as I am not sure where it belongs. We have a MacBook Pro that up until recently had been running Tiger. A problem developed whereby we could not access the iTunes store. A message that the store was "not available at this time" came up repeatedly while at the same time another computer was able to make connections with it. In addition, when Firefox was opened, a prompt appeared to drag the Firefox icon to the applications folder. Even after this was done, the same prompt would appear during subsequent sessions.
We updated the OS to Snow Leopard, and the iTunes store problem was resolved. However, there are some other unusual things going on with other applications.
1. When Photobooth is opened, we get this message: "There is no connected camera."
2. When we open any of the Office applications, we are greeted with: "To open Microsoft Word (or Excel, PowerPoint, etc.), you need to install Rosetta."
3. The above-described issue with Firefox still occurs frequently. Even though Firefox is located in the Applications folder, there is now a volume named Firefox on the desktop. We can't get rid of it.
We don't know for sure if the Photobooth and Office issues were present right before the Snow Leopard installation, but they had worked properly in the past.
One thing we did do is a verify and repair of permissions. There were MANY that needed to be repaired.
In addition, right around the time SL was installed, the computer was frequently shutting off without warning. The mouse was also operating erratically. It was found that the battery needed to be replaced, as the existing one was expanding and was actually disrupting the operation of the mouse pad. Could this battery have been the source of these problems?
What are the next steps we should take?I can deal with parts of this.
2. When we open any of the Office applications, we are greeted with: "To open Microsoft Word (or Excel, PowerPoint, etc.), you need to install Rosetta."
Snow Leo is very aware of apps that are not coded for Intel processors. This message suggests you have Office 2004 or older. Intel coding did not come to Office Mac until version 2008. Rosetta is an Apple emulation technology that lets apps coded for older PowerPC processors work on Macs with Intel processors. Most emulators do not give the performance of a program running natively.
You can either upgrade Office to the previous version 2008, buy a current Office 2011, or deal with the vagaries of emulation. Many people reported that Office 2004 had problems, particularly with keyboard input, when used on an Intel Mac.
NOTE: If you rely on Entourage for a mail client, Office 2011 has dropped Entourage. The business version comes with a new version of Outlook for Mac that replaces Entourage but the Home/student edition does not. If you go for Office 2011 and want to stay with mail features similar to Entourage, you'll have to get the higher-priced version.
One thing we did do is a verify and repair of permissions. There were MANY that needed to be repaired.
I would do it again because some of the things you describe sound like permissions issues. Sometimes, updates can install something that changes permissions. You should be using the version of Disk Utility on your hard drive, not the install disk, to insure the settings in your user folder are properly repaired. -
My hard drive crashed on my macbook pro so i had a new one installed and they couldn't get my pictures off. I dont want to lose all my memories! They gave me back my old hard drive. Is there anyone that could help me?
I think how you understand the value of having backups. All you can do is:
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as MAC Data Recovery, Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads. Recovery software usually provide trial versions that enable you to determine if the software would help before actually paying for it. Beyond this or if the drive has completely failed, then you would need to send the drive to a recovery service which is very expensive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.
You will need an external enclosure for the old drive so you can connect it to the computer in order to try the recovery software before you buy it. But if they don't work then you will need to send the drive to a recovery service such as Drive Savers. -
My Macbook pro has just had a new 500gb hard drive in it and osx snow leopard had not been put on it because i never got a disk when i bought it. It still comes up with the grey screen with the flashing folder which i think would be normal because there is nothing on the hard drive. How do i install OSX Snow Leopard back on it the cheapest way possible?
ThanksYou might be in a bind. While is is normal for new Macs that shipped with Lion to omit a system installation DVD, yours was running Snow Leopard. Apple included a system installation CD or DVD for every computer that shipped with every computer through Snow Leopard. Lion was installed on every machine built starting about August 2011, ending the DVD era.
Apparently your computer had been sitting in someone's inventory for a while, but that's no excuse for them to have removed the DVD from its box.
Try booting Lion Internet Recovery. Read this:
http://support.apple.com/kb/HT4718
I suspect Lion Recovery may not work since "your computer's eligibility for Lion will be verified with Apple" and you appear not to have purchased it.
Please let me know what happens when you attempt to boot Lion Recovery. -
Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?
after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days
-
I have a new MacBook Pro with Iphoto installed when purchased. When editing a photo, primarily orientation changes, the slideshow initially displays the photos in proper orientation. However, after leaving Iphoto and shutting down the computer, and then going back to run a slideshow the photo displays back to its' original orientation, that is, the edit-change was not saved. Please help...the program information says all edit-changes are automatically save and therefore there is no save command, but my changes are not being saved...thank you for any suggestions...HM
what version of iPhoto and of the OS?
Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
LN -
I have a new MacBook Pro with Lion installed and I want to know if I can partition the HD so that I can install & run Snow Leopard OS 10.6.8?
Most likely won't run SL unless it's one that was released before Lion went public. Color SL gone from new Macs.
27" i7 iMac 10.6.8 , Mac OS X (10.7.2), G4 450 MP 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2) -
I have install iwork in my last macbook pro, now i have a new want, do i need to buy it again?
I have install iWork in my las macbook pro, now i have a new one, i want to instal it again, do i need to buy it again?
Nope! Just make sure your signed into the App Store with the same Apple ID that you used to buy iWork on your last MacBook and the buy button should just say download instead.
-
I am trying to install a brand new WD 500 gb sata internal hd in my macbook pro. the original install dvd does not recognise the hd. all hardware is ok. any help?
For some reason OS X disks (whatever edition or flavors) that are supplied with Apple products only seem to contain a limited knowledge of available hard drives on the market at the time of thier publishing. This (rather opportunistically) creates a "Best Before" stale-OS X-software-copy situation where upgrading to or replacing a defective internal SATA hard drive with a newer, better or larger one is a largely hit and miss affair.
If you buy the latest and greatest disk drive available for any older Mac you are likely to run into unresolvable problems making a clean re-install of your own, old edition or flavor of OS X onto any newer or larger hard drive since the OEM (gray) "OS X Install Disks" that Apple supply with retail products seem to contain only time-sensitive lists/mapings of then-known target drives that the Drive Management Tool in the then-published old "Installer Software" will support.
Presumably new (colorful "X") retail versions of OS X (10.whatever.whatever) also contain time-limited Installers with limited knowledge of and adaptability to/compatability with a limited number of old hard drives then kicking-around on the market.
This is especially a problem nowadays since the countless "puny old" hard drives that have been on the market are largely obsolete in a few months time, as manufacturers continue to produce larger and cheaper units, discontinuing older puny products... So if your drive fails you need an exact old (or similar familial) replacement drive for your "backup copy of OS X" to do a fresh, clean OS X re-install. Otherwise you need to purchase a new retail version of OS X, since yours is now effectively obsolete. Purchasing an old, puny drive to re-install your version.flavor of OS X to avoid buying a new version of OS X is a rather false economy.
If you still have a working old hard drive with your old polluted 10.version.flavor of OS X still working on it you apparently must clone it with Time Machine or the newest version of Disk Utility (disk image copying) to most newer, larger drives, and a clean reinstall to such new hard drives is not possible. -
I am updating the OS on my MacBook Pro from 10.5.8. I have installed 10.6.8 and the 10.6.8 combo v1.1. I cannot open my older version of Preview and do not appear to have a newer version which i thought would be on the Snow Leopard dvd. How can I get the correct version of Preview and is it advisable to upgrade to OS7 andOS8?
It is always installed with whatever new version of OS X is installed or appropriate updates. Since you plan to go forward your choice depends on your model. I would urge you to perform a clean install instead of continuing the upgrade path which may interject incompatibilities.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks/Yosemite - System Requirements
Macs that can be upgraded to OS X Yosemite
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Yosemite, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Before attempting a clean install you want to first download the appropriate installer application from the App Store. It will download into your Applications folder. You need to make a copy of it in your Downloads folder so you can make a bootable USB flash drive:
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
Use DiskMaker X to put your installer clone onto the USB flash drive.
Make your own Yosemite flash drive installer using the Yosemite tool:
You can also create a Yosemite flash drive installer via the Terminal. Yosemite has its own built-in installer maker you use via the Terminal:
How to Make an OS X Yosemite Boot Installer USB Drive -
I have a macbook pro and I connected a new iphone to my computer. Somehow all my pictures in the iphoto app deleted. How can I get them back, and no I do not have my TimeMachine On. Please help!
If you are running Lion then all drivers are distributed through Software Update. You do not need to install anything, other than to install the printer in System Preferences > Print & Scan. If you already added the printer while it was connected using USB, you might want to delete it and set it up again wirelessly to avoid confusion. Or, give them two distinct names e.g. "Photosmart D110 (USB)" and "Photosmart D110 (wireless)".
All scanning functions are now performed using Preview, but you can also access the scanner through the same Print & Scan preference pane, or with Image Capture.
This HP document may help explain how driver software is distributed now:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03079365&cc=us&dlc=en&lc=en &product=4144493&tmp_track_link=ot_search#N108 -
I upgraded to Mountain Lion on Macbook Pro today which I bought new three weeks ago, on the upgrade my Ethernet connection is no working, Any ideas on a fix on this issue.
jimr.l wrote:
I upgraded to Mountain Lion on Macbook Pro today which I bought new three weeks ago, on the upgrade my Ethernet connection is no working, Any ideas on a fix on this issue.
If you bought the MBP new 3 weeks ago, it should have come with Mountain Lion already installed. Did you update your MBP to the newly released 10.8.4 update? If not, what OS were you running before the upgrade, and what version of Mountain Lion do you have now? -
My Apple TV is not mirroring my Macbook Pro after I installed OS X Mavericks
My Apple TV is not mirroring my Macbook Pro after I installed OX X Mavericks?
Installing Maverick does not change the hardware requirements.
Did it work prior to installing Maverick?
Does the device meet the hardware requirements?
Supported Macs
AirPlay Mirroring in OS X takes advantage of the hardware video encoding capabilities of 2nd and 3rd Generation Intel Core processors. Hardware video encoding allows AirPlay Mirroring to efficiently deliver high frame rates while maintaining optimal system performance. The following Mac models have processors that support AirPlay Mirroring:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer) -
Can I run a windows software program that is on a CD on my macbook pro after I install bootcamp and windows xp home?
genepaquin,
the last MacBook Pros that supported installing Windows XP in a Boot Camp partition are the Mid 2010 models. If your MacBook Pro is newer than that, and you don’t have a newer version of Windows to install into a Boot Camp partition on your MacBook Pro, then you might consider an alternative such as running Windows with the help of programs such as VirtualBox or Parallels Desktop rather than through Boot Camp.
Maybe you are looking for
-
No phone service from April 2 to April 14?
Could someone from Verizon please email me? I have emailed a message along with my repair requests and am getting the standard reply back. I reported no service a few weeks ago, the tech laid a temporary line (at least I think it was supposed to be
-
My PC will no longer connect to I Tunes Store. I can see my library but cannot connect or sync. Tried everything including all the tips from I Tunes. Nothing works. Have installed and reinstalled over and over.
-
HT1311 Changed my apple ID for iTunes, but did not work for app updates.
I followed the directions on my phone and successfully changed my apple ID for iTunes. But when I to update apps, the old ID still shows. How can I change my Apple ID so I can update my existing apps?
-
Solaris 10 firefox 3.6.14 firefox-bin Invalid argument
I have downloaded the latest firefox-3.6.14, however when I try and run it from the command line I get: /home/cb202208/Install/firefox/run-mozilla.sh: line 421: /home/cb202208/Install/firefox/depend/bin/pango-querymodules: Invalid argument /home/cb20
-
Freezing! Mouse Freezing, Computer freezing and general stalling.
I've got a new mac book pro 15". I've read a few problems about freezing issues, but haven't seen a real solution or of why it happens. It started today, when i browse, look at emails etc. It freezes sometimes the mouse, sometimes the operating syste