MacBook Pro OS X install
I have a MacBook Pro (Mid 2010), and I had Mountain Lion 10.7 installed, I have had to replace my HDD and I need to reinstall my software, and my recovery will not work. I have a copy of snow leopard, but can't get it to boot from the CD, and don't know what to do.....Pleas help.
OS X (Lion/Mountain Lion)- About OS X Recovery
Using Lion Recovery when no DHCP service is available
Computers that can be upgraded to use OS X Internet Recovery
To reinstall Snow Leopard requires the Snow Leopard DVD:
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo
appears.
5. Wait for installer to finish loading.
Similar Messages
-
my macbook pro was first installed with leopard and bootcamp 3.2 under windows 7. After update to lion it is no more possible to update bootcamp to 3.3. or 4.0. The report: The installation source ist not correct. What can i do?
auf Deutsch:
Auf meinem Macbook pro war Leopard und bootcamp 3.2 unter windows 7 installiert. Nach dem update auf lion kann bootcamp nicht mehr upgedatet werden. Weder auf 3.3. noch auf 4.0. Folgende Fehlermeldung kommt: Boot camp Dienste: Das installierte Produkt stimmt nicht mit der Installationsquelle überein. ... Was kann ich tun?It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Mylenium -
There was some updayts for my iPad 4 automatically downloaded. After installing it, the iPad began to restart itself every few minutes.
I tryed to update my iPad using iTunes. After connecting to MacBook Pro, where is installed all latest software, iPad is recognised as "iPad", Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error occured (3). Tried many times, not results. And now iPad stays only in recovery mode, can't switch it off. How can I solve this problem please?When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547
-
I have previously installed Microsoft Office Student Edition 2011 on my MacBook Pro. While installing Microsoft Office 2008 Windows; message prompts to delete Microsoft Office 2011. Is there a way around this issue?
Office 2008 was a Mac version. The equvalent Win version is 2007. So there is no "Office 2008 Windows." Which version are your trying to install?
Are you using Boot Camp to run Win on your MBP and want to install Office for Win there? I can't see that being a problem..
I do know that the regular version of Office Mac won't run properly if the trial version is present. The installer is set up to look for other versions, resumably to keep the trial version and the regualr from clashing.
Office Mac 2011 is equiv to Office for Win 2010
Office Mac 2008 " " " Office for Win 2007
Office Mac 2004 " " " Office for Win 2003 -
Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?
after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days
-
Is there a plug in to make my 2007 macbook pro able to install Mountain Lion
Is there a plug or something in to make my 2007 macbook pro able to install Mountain Lion?
I bought it in early 2007 so just miss out on the cut off point. Is compatibilty based on Hardware or software?
Thanks
MarkMark Harlen wrote:
Is there a plug or something in to make my 2007 macbook pro able to install Mountain Lion?
I bought it in early 2007 so just miss out on the cut off point. Is compatibilty based on Hardware or software?
Thanks
Mark
No. The architechture is too old. I think Lion will be as far as you can go, as a guess without knowing your specs. But if the machine cannot run Mountain Lion then there is no way of doing it (short of replacing the mechanics which would be more expensive than buying a more up to date Mac)
Pete -
My Apple TV is not mirroring my Macbook Pro after I installed OS X Mavericks
My Apple TV is not mirroring my Macbook Pro after I installed OX X Mavericks?
Installing Maverick does not change the hardware requirements.
Did it work prior to installing Maverick?
Does the device meet the hardware requirements?
Supported Macs
AirPlay Mirroring in OS X takes advantage of the hardware video encoding capabilities of 2nd and 3rd Generation Intel Core processors. Hardware video encoding allows AirPlay Mirroring to efficiently deliver high frame rates while maintaining optimal system performance. The following Mac models have processors that support AirPlay Mirroring:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer) -
I have a new MacBook Pro with Iphoto installed when purchased. When editing a photo, primarily orientation changes, the slideshow initially displays the photos in proper orientation. However, after leaving Iphoto and shutting down the computer, and then going back to run a slideshow the photo displays back to its' original orientation, that is, the edit-change was not saved. Please help...the program information says all edit-changes are automatically save and therefore there is no save command, but my changes are not being saved...thank you for any suggestions...HM
what version of iPhoto and of the OS?
Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
LN -
Can I run a windows software program that is on a CD on my macbook pro after I install bootcamp and windows xp home?
genepaquin,
the last MacBook Pros that supported installing Windows XP in a Boot Camp partition are the Mid 2010 models. If your MacBook Pro is newer than that, and you don’t have a newer version of Windows to install into a Boot Camp partition on your MacBook Pro, then you might consider an alternative such as running Windows with the help of programs such as VirtualBox or Parallels Desktop rather than through Boot Camp. -
My macbook pro crashed after installing maverick. I lost all my photos however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?
We'll need to know more to beable to help. Do you want to try to restore your photos from your iPhone to your Mac, or try to recover the photos from the old iPhoto Library on your Mac?
What is the situation of your Mac now? In hat way did it crash? A hardware problem with the drive? Does the system not start properly? Does iPhoto not launch? Do you still have the iPhoto Library on your mac or a backup, so we could try to rescue the photos there?
What versions of iPhoto are on your iPhone and your Mac?
however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?
On the iPhone you cannot access the "package contents" - IOS hides the file system from the users. To restore photos from your phone share all iPhoto photos to your Camera Roll, that are not already in the Camera Roll, and then connect the iPhone via USB and import the Camera Roll to iPhoto or Image Capture. Or use any of the other sharing methods described on thos manual page: see: Ways to share photos http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnk7d8f763e
To retrieve photos from a corruptrd iPhoto Library on your Mac we need to know the version number and more about the "crash" you experienced, the state of your mac, the system, the data. Please post back with more details.
-- Léonie -
hi, i've just bought my first macbook pro, i just installed office mac and when i open the page i cannot see the minimise maximise and close buttons as it's hidden behind the apple menu bar, also when it's at full screen, those buttons do not appear
Try to edit the size of the page using the sides of the page, or if you are desperate, force quit using command-Q. In full screen put your cursor on the top of the page, and the menu bar will appear. If it doesn't keep "pushing" it up until it does. Hope this helps!
-
I have a new MacBook Pro with Lion installed and I want to know if I can partition the HD so that I can install & run Snow Leopard OS 10.6.8?
Most likely won't run SL unless it's one that was released before Lion went public. Color SL gone from new Macs.
27" i7 iMac 10.6.8 , Mac OS X (10.7.2), G4 450 MP 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2) -
How do I reset my MacBook Pro (2008) after installing Mavericks?
Hello,
My MacBook Pro is very slow, which could be due to age.
However, before I just get a new one, I want to try to reset it and basically clean it properly. I have never done that and hope that this could be the solution to the issue.
However, I simply do not know how to do it.
I tried reinstalling Mavericks but it does not offer this option..
Help anyone?
Thank you very much,
IngkeYou need the original discs that shipped with your MacBook Pro in 2008. If you don't have them, you can call Apple (phone # at bottom of page) and, with your serial number handy, order a new set. Cost will be about $25 including shipping & taxes, I believe.
Once you have your original discs, follow the instructions in Thomas Reed's -> How to prepare your Mac for sale. After you've completed those steps, you'll have a 'clean' MacBook Pro, ready to install updates, software, etc.
Good luck,
Clinton -
HT204053 I do not have ICoud in my MacBook Pro, how to install it
I do not have ICoud in my MacBook Pro, how to install it
It looks like you operating system may not meet the minimum requirement.
Cheers
http://support.apple.com/kb/HT4759 -
I have a cd rom for my italian class, but am unable to load it on my macbook pro with Mavericks installed.
Someone has said i need Rosetta, but understand that Apple stopped installing this!1
Can anyone suggest anything to help me??Many educational CDs have not been upgraded due to lack of funds in the educational market to pay for the such updates.
This situation is due primarily to the fact that one of the major political parties in this country favors tax cuts to the rich while cutting federal educational support funding (or eliminating the federal Department of Education altogether).
However, you can restore Rosetta and run your educational CD if you install Snow Leopard Server ($20) into Parallels (up to $79) for use in Lion/Mt. Lion/Mavericks:
[click on image to enlarge]
More information here:
http://forums.macrumors.com/showthread.php?t=1365439 -
I am trying to install a brand new WD 500 gb sata internal hd in my macbook pro. the original install dvd does not recognise the hd. all hardware is ok. any help?
For some reason OS X disks (whatever edition or flavors) that are supplied with Apple products only seem to contain a limited knowledge of available hard drives on the market at the time of thier publishing. This (rather opportunistically) creates a "Best Before" stale-OS X-software-copy situation where upgrading to or replacing a defective internal SATA hard drive with a newer, better or larger one is a largely hit and miss affair.
If you buy the latest and greatest disk drive available for any older Mac you are likely to run into unresolvable problems making a clean re-install of your own, old edition or flavor of OS X onto any newer or larger hard drive since the OEM (gray) "OS X Install Disks" that Apple supply with retail products seem to contain only time-sensitive lists/mapings of then-known target drives that the Drive Management Tool in the then-published old "Installer Software" will support.
Presumably new (colorful "X") retail versions of OS X (10.whatever.whatever) also contain time-limited Installers with limited knowledge of and adaptability to/compatability with a limited number of old hard drives then kicking-around on the market.
This is especially a problem nowadays since the countless "puny old" hard drives that have been on the market are largely obsolete in a few months time, as manufacturers continue to produce larger and cheaper units, discontinuing older puny products... So if your drive fails you need an exact old (or similar familial) replacement drive for your "backup copy of OS X" to do a fresh, clean OS X re-install. Otherwise you need to purchase a new retail version of OS X, since yours is now effectively obsolete. Purchasing an old, puny drive to re-install your version.flavor of OS X to avoid buying a new version of OS X is a rather false economy.
If you still have a working old hard drive with your old polluted 10.version.flavor of OS X still working on it you apparently must clone it with Time Machine or the newest version of Disk Utility (disk image copying) to most newer, larger drives, and a clean reinstall to such new hard drives is not possible.
Maybe you are looking for
-
My screen is frozen on the camera and my phone won't let me shut it off. My lock button doesn't work and my assistance touch button won't let me shut it down either. My phone also takes hours to die and my battery if fully charged so i can't wait for
-
ITunes crashes while refreshing podcasts.
If I just start iTunes, it will just sit there with nothing out of the ordinary. If I switch to Podcasts is when problems manifest themselves. When Mivio went out of business I started getting prompts for login credential, but no information about w
-
By- Product is Power How do we Map this
Hi Everyone I need your help in an Implementation scenario. We have a set-up where :- 1. Oil is the Raw Material .Oil is being taken as pipe -line material . 2. Carbon Black is the Finished Product.Carbon black is produced in production line.We have
-
EIS Drill-Through to Transactional Data
Hi!Is there a quick way to retrieve transactional fact data(non-summarized)from the fact table when drilling through in the Essbase Spreadsheet Add-in ? Have set up a drill through report through EIS, but it doesn't retrieve fact table columns even t
-
Hi, I'm working for one of the fuzzy search requirment, I have to join three tables which are contains serach data with varchar2 datatype, but there is no relationship between that three tables hence i need to join some other tables which is having r