MacBook Pro OS X Yosemite delayed and pixelated login screen
Hi,
Since I updated to Yosemite, it takes munch longer to startup my 2011 MBP and the login screen is distorted.
First, a black screen appears from 30 to 60 seconds, then a pixelated login screen (shown below) appears.
I reinstalled the OS X and repaired the permissions in safe mode. Disabled animation and widgets.
Suggestions to fix this annoyance will be appreciated!
Hi,
Since I updated to Yosemite, it takes munch longer to startup my 2011 MBP and the login screen is distorted.
First, a black screen appears from 30 to 60 seconds, then a pixelated login screen (shown below) appears.
I reinstalled the OS X and repaired the permissions in safe mode. Disabled animation and widgets.
Suggestions to fix this annoyance will be appreciated!
Similar Messages
-
MacBook Pro with retina display (2014) stuck on login screen after latest Yosemite update
Yesterday I ran the latest Yosemite update. The MacBook restarted afterwards, but the login screen won't respond to trackpad or keyboard. The MacBook is fully charged, BTW. I've shut down by holding the power key until it powers off, let it rest, and powered up again. I get the chime and the login screen, but I can't select anything either with trackpad or keyboard.
OHSorry folks, this is me again.
NEVER MIND. I closed the lid, opened it, and all is well. I don't know what was going on, but it seems to have resolved itself. -
Macbook pro will not wake up and shows black screen
Purchased a MBP three weeks ago. After putting the MBP to sleep it will not wake up. Shows black screen and makes fan sound but will not start unless power off and then on again and at times this does not work.
Hi a,
Try an SMC Reset: http://support.apple.com/kb/HT3964
If no luck, you have 90 days of free AppleCare phone support and a one year warranty. Contact AppleCare or make an appointment at an Apple Store "genius" bar. -
It's really frustrating cause I'm a graphic designer, and this is afecting my work so much, I recently changed to mac, because "it's so much better" but now i'm starting to think otherwise.
You will need to take this to an Apple store genius bar.
Ciao. -
After upgrading iPhoto on my MacBook Pro running OSX Yosemite 10.10.3 it continually keeps asking me that it is preparing library. This has happened 5 times now and I can't access my photo's through iPhoto, any suggestions?
There is no upgrade to iPhoto with OS X 10.10.3 - here was an update to version 9.6.1 a few months ago and Photo 1.0 was added with 10.10.3 - what software and which version are you having trouble with - iPhoto or Photos?
LN -
i think i have a virus on my Macbook Pro, OS X Yosemite, how do i wipe my computer clean without erasing photos and music etc?
The update alerts are fake, and are intended to dupe you into installing malware or disclosing private information so that your identity can be stolen.
You might get the alerts when visiting a website that has been hacked. Don't visit the site again. If applicable, notify the site administrator of the problem, but don't send email to an unknown party.
If you get the alerts when visiting more than one well-known website, such as Google, YouTube, or Facebook, then they may be the result of an attack on your router that has caused you to get false results from looking up the addresses of Internet servers. Requests sent to those sites are redirected to a server controlled by the attacker. It's possible, but less likely, that the DNS server used by your ISP has been attacked.
Back up all data.
Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
8.8.8.8
8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. If the fake update alerts stop, see below. Otherwise, ask for instructions.
The router's documentation should tell you how to reset it to the factory default state. Usually there's a pinhole switch somewhere in the back. It may be labeled "RESET." Insert the end of a straightened paper clip or a similar tool and press the button inside for perhaps 15 seconds, or as long as the instructions specify.
After resetting the router, quit the web browser and relaunch it while holding down the shift key. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Do the equivalent if you use another browser. Open the Downloads folder and delete anything you don't recognize.
Then go through the router's initial setup procedure. I can't be specific, because it's different for every model. The key points are these:
1. Don't allow the router to be administered from the WAN (Internet) port, if it has that option. Most do.
2. Set a strong password to protect the router's settings: at least ten random upper- and lower-case letters and digits. Don't use the default password or any other that could be guessed. Save the password in your keychain. Any password that you can remember is weak.
3. If the router is wireless, or if you have a wireless access point on the network, use "WPA 2 Personal" security and set a different strong password to protect the network. If the router or access point doesn't support WPA 2, it's obsolete and must be replaced.
During the time the router was compromised, you were redirected to bogus websites. If you ever connected to a secure site and got a warning from your browser that the identity of the server could not be verified, and you dismissed that warning in order to log in, assume that your credentials for the site have been stolen and that the attacker has control of the account. This warning also applies to all websites on which you saw the fake update alerts.
Check the router manufacturer's website for a firmware update.
If you downloaded and installed what you thought was a software update, ask for instructions. -
Why are websites such as Amazon, Lowes displaying different on a MacBook Pro OS X Yosemite and Safari or Chrome as browsers?
Even the http://www.apple.com/support/ website. See this screen shot from the bottom top and bottom of http://www.apple.com/support/
-
I copied a jpg to the icloud drive on my macbook pro. How do i view that jpg on my iphone 6 plus? Macbook Pro is on Yosemite and iphone on 8.1.
Hello Sunil Gubbi,
Thanks for using Apple Support Communities.
From your post I understand that you'd like to know on how to access your files on iCloud Drive. Please take a look at the information below on how to access the files.
You can access your files in iCloud Drive any of these ways:
Using any supported web browser, you can go to iCloud Drive or iWork for iCloud beta at iCloud.com. In iWork for iCloud beta, you can find your Pages, Numbers, and Keynote files.
On your Mac with OS X Yosemite, you can go to iCloud Drive in Finder.
On your PC with Windows 7 or later and iCloud for Windows 4.0, you can go to iCloud Drive in File Explorer.
On your iPhone, iPad, or iPod touch with iOS 8, you can access your files from Apple apps like Pages, Numbers, and Keynote, or any apps that support iCloud Drive.
iCloud Drive FAQ
Take care,
Alex H. -
Is it possible to have both Safari & Google Chrome on my Macbook Pro OS X Yosemite?
Yes.
-
My macbook pro (OS 10.8.5) and iPad air 2 (set to "Airdrop:everyone") cannot connect with each other
Airdrop does not work between macbook pro & iPad air 2
From the document I posted above see this:
System Requirements
To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
your iOS device needs to include a lightning connector
your iOS device needs iOS 7 or later installed
your Mac needs to be a 2012 or later model with OS X Yosemite installed
Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
MacBook Pro (Late 2008 or newer)*
MacBook Air (Late 2010 or newer)
MacBook (Late 2008 or newer)*
iMac (Early 2009 or newer)
Mac Mini (Mid 2010 or newer)
Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
*The MacBook Pro (17-Inch Late 2008) and the white MacBook (Late 2008) do not support AirDrop.
For help identifying your Mac, choose About This Mac from the Apple menu. You can refer to the Apple Support website to find out if your iPhone, iPad or iPod Touch includes a lightning connector. -
iPad doesn't synch iPhoto events in chronologic order.. what to do? I'm on MacBook Pro, OS X Yosemite 10.10.1 with iPhoto 9.6 - Solution anyone?... Thanks!
Solution anyone?...
Wait for an iOS update and send feedback to Apple. Many have reported that problem here - synced events and faces in arbitrary order, but there is no known solution. You cannot arrange the synced events, albums, and faces on your iOS devices in any way.
You can use this feedback form to submit a feature request: http://www.apple.com/feedback/iphoto.html -
I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?
Welcome to Apple Support Communities
You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance -
How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
My optical drive is non-functional and I want to dual boot with win7. The only problem is my macbook does not boot from USB at all, even when I hold th ALT key down when it is starting up.
-I have a flashdrive with win7 on it.
-I mounted the ISO of win7 with toast for bootcamp to do its thing.Good luck.
Consider this a bump so that hopefully someone with better news spots your thread.
Allan -
To whom It May Concern,i have my macbook pro its a week old and after maybe 2-3 days cleaned it and noticed a little chip in the screen when the light flashed on the computer. Also my charger sometimes just dose not work ill plug it in at a different outlet then it will work its very frustrating to have this many issues i would like to see if i could get a new charger that actually works and a macbook without a tiny chip in it
Please let me know what you guys can do about it.
Thank You,
<Edited by Host>You are not addressing Apple, we are Apple users, like you.
Take it to an Apple Store as soon as you can, you can return it within 14 days of purchase.
Maybe you are looking for
-
all of my email outgoing and incoming information has been wiped out since last update on my computer
-
DIME Attachement IOException using IIS Plug-in / OK without Plug-in
Hi, I have a deployed axis servlet (1.2.1) running on a weblogic server (8.1.5) wich accepts a DIME attachment. The client sends the attachment via axis rpc call.invoke() methods. If I send the attachment via a IIS proxy plug-in URL, I get IOExceptio
-
How can we move a member in a BSO cube other than the manual move in EAS?
When I add a member to the dimension, it gets added at the bottom. Is there a way we can add at the top as a first child of that current member. I don't want to sort. Or is there a way we can move the member by any other means other than manually mov
-
How to find local systems free space?
Hi all, Can any one tell me, how to find C: free space in windows using java?
-
Network diagnostic tool won't run
Thought I'd run the NDT to see if if could tell me why my upload speed was 25 Mbps on a 75/75 connection. It just says testing in progress and has 4 steps that say not started. Nothing ever changes. There is a mention of a Java applet however I ne