MacBook Pro OsX won't get past loading apple screen?

I have tried all the steps besides reinstalling. This is what I think may be the problem at startup:
It says "Bug: launchctl.c3817....." and about 30 lines of similar code then it gets to "bootcachecontrol: could not unlink playlist..." and "launchctl: please convert the following to launched: /etc/mach_init.d/dashboardadvisoryd.plist" then it goes "launch_msg(): socket is not connected" followed by "bootcachecontrol: could not create temporary playlist file: invalid argument" and finally it says "bootcachecontrol: could not write playlist." that is where it stops loading during the start up. Any ideas of what to do?
Thanks!

Similar Messages

Macbook won't get past grey apple screen

So my computer was being stupid so I had to manually shut it down. When I went to restart, it would never get past the grey screen with the apple logo. It didn't even get the spinning wheel thing. I don't have the discs for it, but I do have them for a white macbook (early 2008). I tried clearing the PRAM etc but to no avail, and instead of booting from the disc it seems to just do the exact same thing, only sometimes it turns off, back on, and does the same thing. When I started it holding cmd v it gave me stuff saying it couldn't find file (insert many file names here)
Help!

I went to the mac store and they told me it could be two things 1. need an archive update or 2. need a new hard drive. It ended up being the hard drive is shot. It seems many people are having this problem even though it hasn't been out for long, so if you are having trouble restarting it (error reading 0x7 or any error reading driver messages) you should take it to the mac store.

MacBook Pro won't get past the apple screen on startup

The laptop won't startup. I get to the Apple logo and a spinning gear. I've tried starting it 3 times with the same result.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My iMac won't get past little apple screen icon

When I turn on iMac, it never goes past the white apple screen and the little wheel just turns and turns for hours if I let it. I turn it off, unplug it, turn it back on...but nothing! Any ideas?
Thanks

Have you tried booting from your install disc? You should also have a disc with Apple Hardware Test on it, try and see if you can start up from that and run the test.
It would be helpful to know which model you have (how to identify your iMac).
Also, see if anything here helps: won't complete startup.

Start Up won't get past grey Apple screen

Trying to start my computer for first time in 6 days. When turning on it gets to Grey Apple logo screen and then a bar appears underneath, the bar doesn't fill and then the computer powers down. Please help.

Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
If you make it to the desktop, repair permissions-http://docs.info.apple.com/article.html?artnum=25751

MacBook Pro, 2012, can't get past boot up screen and the progress bar never fills.

Any thoughts on why or a different command that I can try while powering up?
I press the power button, and it dings per usual. Then the first gray screen pops up and it starts spinning. Then a progress bar appears. It fills about a quarter of the way, and then the screen goes black and the computer shuts down.
Any thoughts on why this might be happening and anything I can try to help boot it back up would be great. Thanks!

Then a progress bar appears.
The progress Bar appears when your Boot drive will not mount. It runs a task similar to Disk Utility (Repair disk) and shows you the progress. It is normal for the bar to only fill less than a third of the way.
If your Mac then shuts down, this is because the Repairs could not be completed. Your Boot Drive (either the mechanism or the contents) is in trouble.
Try booting to Recovery Mode, and attempt to make the repairs form there.
If no joy, buy a drive that could replace your Internal drive, and an enclosure to place it in while you Install a new copy of Mac OS X form fundamental sources. Making a complete copy of a drive you know to be damaged is not generally helpful, but may be needed later if you do not have a Backup.
The advice to erase your drive should be ignored. It was invented long ago, when drives cost US$1000, and the prize was getting the drive mechanism working again.

Powerbook will turn on but won't get past grey apple screen

My powerbook will turn on but it will never get to the operating system screen where you enter a password. I don't know what to do and sometimes it will get to the all blue screen but not past that... Any help would be greatly appreciated. Also, is there anyway to get my files off of the laptop regardless? There are 3 weeks until my final exams and I have all my notes on my laptop. Any help is greatly appreciated.

If you can boot off the installation DVD, then your computer's fine, and there is something broken with the system software.
You could try re-installing Mac OS X (not a clean install, or an erase-and-install, but just an upgrade of the existing OS), but that may lead to having your apps broken, which may be more work for you.
Another thing to try is to hold the Shift key down whilst you are booting into the login screen. Doing this will disable the startup of some system extensions and daemons (StartupItems), which may get you going. However, if you can go to the login screen without too much trouble, try logging in with the Shift key down. That will stop Mac OS X from starting up items in your "Login Items" list in the Accounts system preferences.
This is the most useful tips I can offer short of re-installing Mac OS X on your computer.
Cheers!
--tonza

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something"sign... it just doesn't start the system....

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
Please help
Marcelo

If there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
Gray, Blue or White screen at boot, w/spinner/progress bar
Also take this time to backup your users files off the machine if possible.
Most commonly used backup methods
Sometime that won't work and you need to do more
..Step by Step to fix your Mac

Computer won't get past the blue screen...

During class today I decide to install new updates to my computer, but class ended before everything had downloaded so I just closed the screen thinking nothing of it. Now my computer won't get past the blue screen and it just keeps reloading and reloading. Help?

You must have damaged your OS installation by putting the machine to sleep at the wrong moment. To fix that, you need to reinstall, but first you need to back up your data, if you haven't already done so. Have you?

Pavilion p6-2117 won't get past the splash screen with a parallel card installed.

Pavilion p6-2117c won't get past the splash screen with a pci express parallel card installed. I take the card out and the machine works just fine. The screen says press "esc" for startup menu but nothing happens.
This question was solved.
View Solution.

Take a careful look at the slot and see if any of the pins are broken or smashed to the bottom of the slot. Do you have another pci slot to try or just the one?
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

My iPhone 4s (bought today) won't get past the activation screen. It says 'it may take a few minutes to activate your iPhone' and then skips to another screen saying 'activation failed - try again'. Any solutions?

my iPhone 4s (bought today) won't get past the activation screen. It says 'it may take a few minutes to activate your iPhone' and then skips to another screen saying 'activation failed - try again'. Any solutions?

Apple's activation server is down.
I called Apple and the support team had the same issue.
All you can do is be patient.

POWERBOOK G4 14 1.33 WONT GET PAST THE APPLE SCREEN

I have a powerbook G4 14 inch 1.33 mhz processor with 256 mb of ram. The screen will not get past the apple screen. I have tried 3 seperate hard drives none of them would boot past the apple screen. The disk drive is broken, I will be replacing it shortly to put a OS X CD or disk warrior cd in it. Does anybody know what would cause this? I reset PRAM, PMU and tried booting in safe mode. It gets to the apple and then the little circle spins and spins and it doesnt load..

Heres some history of the computer. I orginally put a 12 gb hard drive cuz it came with no hard drive in it and it was working great, but then became slower and slower until it got stuck on the apple screen. i tried 2 other hard drives and they didnt work. i then replaced it with a brand new 60 gb hard drive. i also bought a new optical drive and put that in because the optical drive never worked. i have tried two different ram sticks. i have tried pressing shift,c,option none of that works. option makes it freeze on the boot screen. open firmware works...command S did work until recently...command v does not work...reset pram and nvram. reset PMU. I AM AT A LOSS. is there something i forgot to leave connected during the process that could be causing this? I get USB BOOT ERROR 0 1 1 in open firmware. I DOUBT its the logic board, because it makes the chime and I can get into open firmware and the start up screen.

MacBook 2010 won't get past loading screen

Hi everyone. I don't live anywhere near an apple store so am hoping I can get some help here. My MacBook won't get past the initial White loading screen with the grey apple logo. A loading bar (which I've never seen before) comes up, loads about 1/5 of the way, disappears, comes back empty, does the same thing then my laptop turns off. About two weeks ago the battery stopped working without being plugged in and each time I turned it on it had reset the date to 01/01/2001. Any advice would be greatly appreciated. Thank you.

Welcome to the Apple Support Communities
The hard drive is damaged. Insert the Mac OS X DVD, press C key when your Mac starts, go to Utilities > Disk Utility and repair the drive. If it doesn't work, take the Mac to an Apple Store.
If you haven't made a backup, download DiskWarrior

MacBook Pro won't get past grey startup screen

I have a late 2011 15 inch MacBook Pro running Mavericks. Around a month ago, maybe more, it began to sometimes completely freeze or just turn off while Inwas using it. Sometimes it would start up again, sometimes it wouldn't and would beep three times. Eventually it wouldn't start up at all and would just beep. I started it up in recovery (holding command +R) and ran a disk repair, it said the disk couldn't be repaired. I had it backed up on Time Machine so I replaced the HD and restored from Time Machine. It was fine for a couple days after that, then the old symptoms returned. I took the RAM out and replaced them with some RAM of the same size (2 chips, 2GB each) taken out of a Windows laptop that I had. Again, it was fine for a few days then started turning off and beeping. Then it would turn on but not boot up, i.e. get stuck on the grey screen with the spinning circle. I tried booting in recovery, booting into safe mode, holding option and choosing a disk; in all cases it would just stay stuck on grey screen with the spinning thing. I tried PRAM and SMC reset, no result. At one point, it got through boot up in safe mode but took like an hour to do so. I restarted from safe mode and it took another hour and booted up normally. Then it turned off again and wouldn't turn back on. I opened it up, reseated the RAM and cleaned he fans, which were filled with dust and build up. It turned on and ran normally for a couple days in which I wasn't doing much on it, just watching stuff on VLC or reading, so not really using it and clicking and stuff. Next day, I open it (from sleep, it hasn't been shut down at all since I got it to run again), and try to open Firefox and actually work; it keeps freezing and being incredibly slow, to the point where it was totally frozen and I couldn't force quit or anything. So I held the power key to shut it down; since then it's back to not getting past the grey screen, even when I leave it for over an hour. No idea what to do, anyone have an idea? Thanks in advance.

You have to use Mac specific RAM chips.
You have to buy new RAM modules, I guess.
If you have extended AppleCare, contact Apple.
Best.

MacBook Pro won't get past gray start screen - RunTime corruption error

Hi, I am a novice when it comes to fixing things, so I will make a Genius Bar appointment, but I thought I would consult this community first in case anyone has experienced this same issue:
I was using my 13 in. MacBook Pro this morning after not using it for a couple weeks. (It was running fine last time.) It started up fine, and the few applications I was using worked OK. Then I got an error saying I needed to update my Java in order to access my work VPN. I didn't think twice about downloading the Java upgrade. Once the Java download was complete, I thought I might need to restart to get the VPN to recognize the update. And that was the last time I was able to see my desktop. I restarted, and the could not get past the gray screen. I did this twice. Then I did a safe boot (showing the status of the progression), and that when I saw this message over and over and over:
hfs: RunTime corruption detected on MacIntosh HD, fsck will be forced on next mount.
hfs: BlockMarkFreeInternal () trying to free unallocated blocks (10865570,8) on volume MacIntosh HD
(I snapped a pic with my phone - that's how I transcribed it.)
This ran for about 20 minutes before I suspected it wasn't actually doing anything, and I forced it to shut down by pressing the power button.
I just tried to start it again (fingers crossed, hoping for a miracle), but no such luck. Does anyone have any ideas? Is all lost? Thank you in advance for any recommendations!
Jennifer

I should add that I don't know if the Java download is responsible - could just be a coincidence that it was the last thing I did/downloaded before restarting.

MacBook Pro OsX won't get past loading apple screen?

Similar Messages

Maybe you are looking for