Macbook pro power cord frayed and not charging

Ive just noticed I have the same power cord problem. I plugged in the cord into my macbook and noticed that the light did not turn on. Upon closer inspection I noticed the wire was frayed and was real hot. I have not moved my power adapter or have had something happen for it to be that bad. Im not sure if Im still under my 1 year warranty plan thing, but I was wondering if I took it into the apple store they would still replace it. So if anyone has been in this situation and knows the best option, besides spending the 80 bucks for a new one I would greatly appreciate it.

Hope you feel better.
I assume the OP bought it there and can certainly go back under the 1 year and show them another melted one as there have been enough melted ones for them to know this is a bit of a problem. He can call Applecare as well of course.
Message was edited by: Host

Similar Messages

My MacBook Pro tells me it's not charging when I connect the charger. What do I do?

My MacBook Pro tells me it's not charging when I connect the charger. Right now it's reading it, but other times it does not. What do I do?

Initiating a charge cycle is a costly and disruptive operation. It is only started when the benefit to battery life exceeds the cost to battery life of a charge operation. That is usually when the battery falls below 90 percent charged.

How can i get my macbook pro too stay on and not sleep when lid is closed?

how can i get my macbook pro too stay on and not sleep when lid is closed?

If the machine is asleep, lid closed, and you plug in to an external monitor and an external USB keyboard, the machine will wake, anbd reconfigure the screen resolution for the external monitor, Once it has made this configuration change, you can open the lid and it will continue to address only the external monitor. At least that's how my early MacBook Pro unibody 13" works. It seems to run a bit cooler this way. It gets quite toasty with the lid closed while doing anything demanding and you are more likely to hear the fan come on. I have not seen any temps that would cause alarm, but I do get a high speed (6000 rpm), noisy fan sometimes with the lid closed, .
If you operate in the open-lid, external monitor only mode, if you deactivate the monitor for any reason, when it reactivates it will be running both screens, with all the navigation hassles this entails, so I generally set it not to deactivate the screen when in this mode.
Thus I agree with those who say that some of the cooling air is drawn in around the keyboard, the difference in cooling performance is observable. If you activate istat pro, get the computer hot running in clamshell mode, and open the lid, you can watch the CPU temp drop by a few degrees C within a couple minutes. It isn't a huge difference, but enough the lower the fan speeds.

NEW macbook pro power cord not working

I just bought my macbook pro 3 weeks ago and for some reason my power cord is not working to charge the computer. There doesn't appear to be any damage to it and I've tried plugging it in to different outlets etc. and no luck. I noticed one day that it was blinking on and off from charging and not charging and then the next day it just stopped working completely. Is this a common thing? Should I just go buy a new one?

Welcome to Apple Discussions!
Your power adaptor is under warranty as well as your new Mac. If it isn't working, Apple should replace it for free under warranty.
You might want to try resetting the SMC:
http://support.apple.com/kb/HT1411?viewlocale=en_US
This is likely the first thing they would do at the Apple Store, and it may well solve the charging problem.
Good luck!

MacBook Pro went for sleep and not waking up

mAC bOOK pRO WENT TO SLEEP AND NOT WAKING UP

Contact Apple.
You can try Reset SMC
http://support.apple.com/kb/HT3964

Does Applecare cover MacBook and MacBook Pro power cords/bricks?

I've replaced several over the years. They seem to be the weak link in these laptops. My Applecare is still in effect on the latest Pro. Has anyone dealt with Applecare on this issue? Specifically, in the area behind the small mag-safe plug a wire(s) seems to have broken connection. Thanks.

The original adapter that came with the machine for which you bought AppleCare was covered. If you had the first one replaced under AppleCare, the subsequent ones might also be covered, but only as long as you continued to apply to AppleCare to cover them. If you just went and bought them, they're covered only by their own warranties.
Damage of the kind you describe is caused by user abuse: disconnecting the plug by pulling on the cord (accidentally or deliberately), or bending the cord too sharply right behind the plug. If neither of those things happens, the cord won't fray and break there.

MacBook and 17" MacBook Pro Power Cords Interchangable?

Can I use the adaptor/charger (both are MagSafe) from my MacBook on my 17" MacBook Pro? Is it safe? Will it harm the the battery?

You cannot. The MacBook Pro uses an 85W power adapter, while the MacBook comes with a 65W adapter. You can safely use the MBP's adapter with the MacBook, though.
MacBook Mac OS X (10.4.7)

Macbook Pro Mid-2010 15" is not charging with dim green light

Hi all,
I have spilled a bit of water on the keyboard of my Macbook Pro this Monday. It continued working just fine.
So, I took it home, and 2h later, when I pluged the charger in, the light turned into a very faint/dim green light and it was not charging anymore. It does not consumes battery power, because it's plugged in the outlet, but it does not charge either (says "not charging").
I have tried the following:
Plugging it in to a different outlet
Trying other MagSafe chargers
Making sure it's the correct charger (85w)
Resetting SMC
Resetting NVRAM
I have opened the back, and although I could not dismount it anymore because the lack of appropriate screwdrivers, I could find no sign of humidity or water damage.
Checking the system information page in the MacOS, I could notice that, when the charger is plugged, amperage information gradually progresses from ~ -2000 to 0.
And it does not seem to recognize the charger. See below:
AC Charger Information:
Connected:     Yes
ID:     0x0000
Wattage (W):     0
Revision:     0x0000
Family:     0x0000
Serial Number:     0x00000000
Charging:     No
Do you guys have any other suggestions?

If you are lucky, the power adapter is faulty. I suspect that there are problems inside the MBP. I still advocate a trip to an Apple store genius bar. Your MBP has a hardware issue and they (Apple) can diagnose it and tell you exactly what will be required to repair it.
Ciao.

Macbook pro 2010's battery is not charging.

hello, so for a while now the battery status was showing 'repalce soon' message so i wasnt to surprised that last week the battery jsut wouldnt charge, the power source was plugged in but it said not charging still. so i bought a new battery, only just chaned it but it still isnt chatging. the charge is 80 % but not charging still i did the system power management reset or whatever that i found in another forum but it didtn work. the is not light on the magsafe adapter not amber nor green.
what could go wrong? i would think that the power adapter is working as the comuter recognises it as a power source but why isn;t it charging? could it be some sort of software fault?
please help i really need the computer to be flexible not tied to a cable....

Hi, thanks for your reply, my mac book model details are here, and I definitely plugged the charger in, but as i said none of the lights came on though..
Model Name:          MacBook Pro
Model Identifier:          MacBookPro7,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.4 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP71.0039.B0B
SMC Version (system):          1.62f7
Serial Number (system):          34017MMBATM
Hardware UUID:          3669AA06-C07F-517C-9F4F-5F7BFB7CC1F1
Sudden Motion Sensor:
State:          Enabled
and here are the details of the battery, i bought it from akku-moster.de - its brand new, it looks genuine too.
Battery Information:
Model Information:
Serial Number:          W02274L1UD3LC
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          201
Hardware Revision:          000a
Cell Revision:          165
Charge Information:
Charge Remaining (mAh):          4653
Fully Charged:          No
Charging:          No
Full Charge Capacity (mAh):          5735
Health Information:
Cycle Count:          0
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          12078
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          180
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          60
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
PrioritizeNetworkReachabilityOverSleep:          0
Battery Power:
System Sleep Timer (Minutes):          60
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          15
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0000
Revision:          0x0000
Family:          0x0000
Serial Number:          0x00000000
Charging:          No

Use MacBook Pro power cord with iPad?

Hi all - if I remove the two prong AC plug from the iPad's power brick, the exposed connector looks like it will accept the extension cord that was included with my MacBook Pro's power brick. Is there any reason I couldn't use the Mac's cord with the iPad's power brick this way? I assume not but just want to be safe.

Hi,
Is there any reason I couldn't use the Mac's cord with the iPad's power brick this way? I assume not but just want to be safe.
Not is correct.
Only use the cables and the 10W USB Power Adapter that came with your iPad. Otherwise you could damage the hardware and void your iPad warranty.
If you are running v10.4.8 on your Mac as your profile suggests, be aware the minimum system requirements for the iPad for Mac is v10.5.8 as noted here.
iPad Tech Specs
Carolyn

Ask your question.new battery 4 macbook pro 15in....not charging

my new battery is not charging.??... i can only used my "lab top"with help of the power adapter....ANY /HELP ,so i can stop plug in ...mac probook 15in...THANKS

I installed the new one, the MacBook did not recognize it. I thought it needed to charge, but the green light on the power cord came on, so I didn't think that was the problem. In the status bar, the battery shows up with an X in it, and no percentage will display.

MacBook Pro Power Management Issues and "Broken" Bootcamp

This is not a question but rather a solution I have discovered to a problem I have experienced many times now.
My Core 2 Duo 15" MacBook Pro (non-LED version) has exhibited several issues with the systems power management hardware.
Firstly: Occasionally the system will refuse to turn on. This has happened to me twice, it usually happens when I am running on just batteries. The very first time it happened I was in a meeting and had important data I had to get from the laptop, I was silently panicking. After swearing at my new 2.5 grand pride and joy, I happened to read an old support article relating to older PowerBooks which exhibited the same problems. Apple recommended taking the battery out and then holding the power button for several seconds and then reinserting the battery. This apparently resets the power management hardware feature -- and it worked, and has worked three times since.
Secondly: I have had a persistent problem when running Bootcamp. Sometimes the machine doesn’t go to sleep properly and although it everything looks right it continues to run (and perhaps, like me, you’ve backed it away in your bag and hence didnt notice it burning up. What has happened to me several times is that it literally "breaks" Windows XP. When you wake the computer or turn it back on (if the battery drained) then youll find Windows running PAINFULLY slow. If you press CTRL-ALT-DELETE (to bring up the task manager) I would see that the CPU is working very hard (at nearly full utilization) and it is so occupied that it won’t respond to anything I do at all. No matter what I did (I attempted a system restore, which was a two hour task with the computer running in its "broken" state) nothing would bring windows back to life. The first two times this occurred I was devastated because the only thing left for me to try was to remove the windows partition and install it fresh (thus losing all my files and settings -- although for the record you can still access the windows partitions files through Mac OS X). This ruined a near full day for me each time the computer did this (having a lot of settings and tweaks and installed programs to reapply). The third time this happened I did the "trick" listed above and reset the MacBook Pro's power management hardware. this has solved the problem ever since (two additional times now). I post this in case someone experiencing the same issue searches the forum.
I dont know the technical explanation but obviously there is an issue within this series of MacBook Pro's power management. Perhaps it relates to the "artificial" BIOS the system presents to windows through Apple's EFI system (Windows requires legacy BIOS to operate and all Intel Macs alternatively use EFI, so an extra "trick" had to be added by Apple for Windows to be compatible).

The computer. If two different batteries behave the same way it gives credence to possible issues with the power manager. You can try resetting it with:
http://docs.info.apple.com/article.html?artnum=303319
And verifying the firmware is up to date:
http://docs.info.apple.com/article.html?artnum=303880
And running the hardware test:
http://docs.info.apple.com/article.html?artnum=303081
If nothing seems to help, call AppleCare again, and tell them the battery replacement did not solve the problem and that you tried the above and tell them the results you got.

Exposed MacBook Pro power cord

This is happened before, but I forgot where I got a free replacment. The power cord for MacBook Pro ripped from pressure where it naturally bends. I don't feel comfortable with the wires being exposed. Do I call Apple's general 1-800 number. If so, which option do I press? I no longer have a warranty on my MacBook Pro, but this tear was due to how the power cord is constructed or not any damage I did to it.

I would make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
BTW, this is the Mac Pro desktop forum

MacBook Pro 15' 2.8GHz 2009 not charging battery.

Hi there!
This problem just came out of no where!
My battery doesn't charge anymore. Also the date gets back to 2001 every time the MBP powers up.
I tried to re set the SMC and nothing happened. After released all keys and power the MBP the Magsafe didn't change colour as described.
Another note: the instructions don't say the time that you actually have to hold the keys down for?
How long do you have to wait before powering up your MBP etc. Nt very specific.
Anyway, The battery information says that Battery is "Not Charging" on the System Profiler and the drop down menu on the top right battery icon. My MBP is still under warranty but I don't usually panic before go to the Mac Shop and get help. "It takes a long time to get help by a genius in Melbourne, even if you book a time" Poor guys they don't stop.
I cleaned all the surfaces of the Magsafe and MBP and I also have a second MBP and used the other Magsafe with the same issue.
On the System Profiler info the battery seems to be Ok with just one cycle.
Any help will be very appreciated.
Cheers

The other way around is the same. I tried "detect display", nothing happens. Nothing showing another display at all.
If it was a defective cable then I would NOT get a replacement because I just don't want the hassle of working on it and the problem will be the same.
Most likely to mail it back to get cash back.
Umm, to add, I am running 10.6.4 and have NOT yet upgrade it to 10.6.5. I still don't think that'll solve the problem.
Any ideas?

Why is my Macbook pro now extremely slow and not running things like powerpoint any more?

I'm sure I'm not the only one.
Mavericks installed. Now my Macbook Pro is slower than a one-legged tortoise.
It won't run powerpoint, which just crashes. en my keyboard misses the first part of sentences because it can't keep up. I have to double check everything I type. I'm trying to run a business, and I'm losing time, money and the will to live.
I cannot reinstall microsoft office, as I bought my macbook Pro (2 GHz Intel Core i7, 8GB 1600 MHz DDR3) from a seller who cleanly installed Mountain lion for me, and installed Office 11 on it. I do not have any installation disks. I have been forced to downgrade to Mountain Lion, which I'm still waiting for Apple to send to me.
Is there anyone out there who can give me any help. I'm not paying Apple any more money. Why should I? I've already been forced to rebuy an operating system that my Macbook previously had installed.
Not only that, I think I have an expanding battery issue, and my trackpad is now broken. Just to add to my woes.
Has anyone had a solution to solving the Mavericks debacle?
Please somebody, help.
Please.
Before I start self harming.

Hi all;
I agree with stobston, many thanks to cbs20 for your inputs. I was stuck with this one also.   I'm a former UNIX sysadmin; thanks so much for pointer to etrecheck. It's nice to be able to look under the hood.
I had the same problem, Powerpoint was so slow as to be nearly useless. Apparently different cause&effect from stobston's case. Here's what worked for me. Sorry if I'm stating the obvious below; I'm new to MacOS after many years on MS-Windows;
First, I ran etrecheck and got the following;
Hardware Information:
         MacBook Air (13-inch, Mid 2013)
         MacBook Air - model: MacBookAir6,2
         1 1.3 GHz Intel Core i5 CPU: 2 cores
         4 GB RAM
Video Information:
         Intel HD Graphics 5000 - VRAM: 1024 MB
System Software:
         OS X 10.8.5 (12F45) - Uptime: 0 days 2:59:30
Disk Information:
         APPLE SSD SM0256F disk0 : (251 GB)
                   disk0s1 (disk0s1) <not mounted>: 209.7 MB
              Macintosh HD (disk0s2) / [Startup]: 250.14 GB (150.98 GB free)
                   Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
         Apple Internal Memory Card Reader
         Apple Inc. BRCM20702 Hub
                   Apple Inc. Bluetooth USB Host Controller
         Logitech USB Receiver
Thunderbolt Information:
         Apple Inc. thunderbolt_bus
Gatekeeper:
         Anywhere
Launch Daemons:
       [loaded]             com.adobe.fpsaud.plist Support
       [loaded]             com.microsoft.office.licensing.helper.plist Support
Launch Agents:
       [loaded]             com.citrix.AuthManager_Mac.plist Support
       [running]             com.citrix.ReceiverHelper.plist Support
       [running]             com.citrix.ServiceRecords.plist Support
User Launch Agents:
       [loaded]             com.citrixonline.GoToMeeting.G2MUpdate.plist Support
       [loaded]             com.google.keystone.agent.plist Support
User Login Items:
         iTunesHelper
         Dropbox
         Google Drive
Internet Plug-ins:
         FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
         QuickTime Plugin: Version: 7.7.1
         Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
         CitrixICAClientPlugIn: Version: 11.8.2 - SDK 10.7 Support
         SharePointBrowserPlugin: Version: 14.3.8 - SDK 10.6 Support
         Silverlight: Version: 5.1.30214.0 - SDK 10.6 Support
         JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Audio Plug-ins:
         AirPlay: Version: 1.7 - SDK 10.8
         iSightAudio: Version: 7.7.1 - SDK 10.8
iTunes Plug-ins:
         Quartz Composer Visualizer: Version: 1.4 - SDK 10.8
User Internet Plug-ins:
         CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
         WebEx64: Version: 1.0 - SDK 10.6 Support
         ZoomUsPlugIn: Version: 2.0.31405.1104 - SDK 10.8 Support
3rd Party Preference Panes:
         Flash Player Support
Time Machine:
         Time Machine not configured!
Top Processes by CPU:
            3%         WindowServer
            1%         fontd
            1%         Microsoft PowerPoint
            1%         Microsoft Word
            0%         coreservicesd
Top Processes by Memory:
       254 MB     Microsoft PowerPoint
       225 MB     WebProcess
       135 MB     mds
       135 MB     Microsoft Excel
       131 MB     Finder
Virtual Memory Information:
       891 MB     Free RAM
       1.68 GB     Active RAM
       833 MB     Inactive RAM
       524 MB     Wired RAM
       1.52 GB     Page-ins
       0 B              Page-outs
Note that I had no heavy CPU processes like stobston had. There are some processes using lots of memory though. Made me wonder, could it be a swap or contention issue? I have a Macbook Air, so 'swapping' doesn't mean what it used to mean. Anyway, I tried closing Excel and Finder. Powerpoint was still slow.   I ran etrechek again. WebProcess and mds are still running at the same memory usage; nearly half a gig between them. WebProcess is Safari; shutting down Safari didn't help.   I have heard that Safari has had memory leaks, I don't know if that's true or not. mds is the MetaData Server for SpotLight. I had run Spotlight several times today, and also did a lot of desktop cleanup.   That might have triggered mds.
I don't know how well Mountain Lion reclaims memory ( now I'm really getting into the weeds ), so I shut down MacOS and restarted it. This time, I started up PowerPoint first, with nothing else running. Problem solved. PPT is running fine.
Thanks again all for your inputs. An hour ago, I had no idea where to start.

Macbook pro power cord frayed and not charging

Similar Messages

Maybe you are looking for