MacBook Pro Problem when Starting OS X

Hello their.
I'm had a serious problem with my MacBook Pro, when the OS X starting up then after 10 to 15 seconds it's shut down, when i check the hardware test it's no error at all, but I'm trying to run recovery mode, install new OS X, run the OS X, verbose mode. all this checks goes away because my Mac shutdown immediately after 10 to 15 seconds.
please help me what is wrong on my Mac.
Thanks for your patient.

I'm take my Mac BookPro to Apple Authorized Service Center on March 17 - 2013 and today the Apple ASC tell me the Top Case is my problem and after the part came from outside my country via DHL it will replace and i can take it after maintenance.
Thanks.

Similar Messages

MacBook Pro Problems at Start Up: Please Help!!

Hellos and Saluations,
Lads and gents: I first want to say what a brilliant board you all have here. Congrats to the admins and mods for a splendid job!
My new friends, I have a MacBook Pro (Intel) that I purchased a little over 1 year ago. I was still running Tiger when, about 6 weeks ago, upon opening the book, I started getting a gray screen that would stay there for a few seconds, then allowing me to start working. Fast forward to 4 weeks ago. The same thing happened, but it got stuck on the gray screen. The next morning it had the same symptoms, but eventually after messing with the mouse pad it came back on. Unfortunately, today it's doing the same thing, and it's stuck on gray.
Being a noob to this forum doesn't make me a board noob in general. I did some searches on this and have tried a number of things from other thread suggestions.
Things I've tried:
A. At start up, holding the Option, Apple, P, R buttons.
B. At start up, holding the Shift button
C. At start up, holding the C button (this produced an audible sound only)
D. There is no Apple icon on the screen, just gray/blue
E. There is no spinning wheel of death
F. I haven't spilled any liquid on it, nor dropped it
A couple of weeks ago, I took the computer to the Apple store. They ran a stress test and tried to replicate the issue, but couldn't. I was advised that they determined the issue to not be hardware/hard drive related; but that the problem was most likely software based. At this time I took the opportunity to upgrade to Leopard. For a little over a week the book was good to go -- no issues at start up. However, not even a week later, when I returned home from work the issue reared it's ugly head again. After a couple attempts at hard shut downs I gave up. The next morning, same thing except that it eventually came back on...
Fast forward to last night.. the MacBook Pro has been on the gray/bluish/greenish screen for close to 24 hours now. I've tried re-booting several times now; pulling the battery then restarting, restarting in safe mode, letting the battery go completely dead then powering up after plugging it in, etc. NOTHING works...
This really fails. The book is only 14 months old and only used for a couple of hours/day. The "genius" at the Apple store advised me that this issue isn't hardware related, but I'm beginning to think that it's a video card issue, which, if I'm not mistaken, is incorporated into the motherboard -- making it a hardware issue. I'm gonna be hells p!ssed if they tell me it's the video card or the screen. Both will be stoopid expensive and, after only 14 months of light use, very very disappointing to their quality.
Anyways, sorry if this is long winded, but I don't know any other way of explaining..
Thanks in advance for any help that people can provide! Again, great forum too!
Darren

So yea. Just returned from the Apple store. They've deduced that the culprit to this issue is my video card. Whilst they were diagnosing the problem, I let the genius know that this is my first Mac product; that I run an international mail order business with 45 windows based pc's; that this book was somewhat of a trial to determine whether or not we would switch to Mac for our network; that we have a deal with Dell on the table to provide us with all new Dell computers; and finally that, given this catastrophic qc failure, we would more than likely be going with Dell (depending on if Apple was going to take care of me on this or not).
Apparently this got through to the genius, as he advised me that, given the book was only 1 month out of warranty, they would be replacing the motherboard pro-bono. This was greatly appreciated by me (and my company) and we will be in talks with Apple to have them provide us with our new network. This whole ordeal, while somewhat insignificant to the overall day-to-day issues of my life, still had me rather concerned about the quality control, and especially customer service of Apple/Mac. I have a new found positive outlook on their service at this time and will report my dealings on all of the international forums that my company is a prominent member/vendor on.
Last,I will continue to update this as it still offers to add to the comprehensive knowledge base of MacBook issues and Apple customer service.
Darren

Macbook Pro problem on Start up

I just purchased my macbook pro in June 2010. The other day I went to start it up, it loaded but i was unable to click on anything, the pointer was able to move across the screen but when i went over the icons they didnt magnify like they were supposed to and I could not click on anything. Most of the time on start up it was the pointer, but there were a few times it just stayed as the little wait circle timer thing. I googled on my other computer and they said it could be the OS so reinstall it. So i reinstalled the OS. It worked but when i turned the computer off and on after that the same thing continued to happen. I even tried hooking up an optical mouse and still had the same problem. I don't know whats wrong.

I noticed a somewhat similar issue a few times now. When I startup my MacbookPro I need to click on a user on the login screen. I clicked but did not get the password entry. I clicked a few times the ESC key and after that I was able to press shutdown/restart. The problem disappeared and I don't know what caused or solved it.

MacBook pro stuck when starting up.

Yesterday I force quit my MacBook pro mid 09 because it was taking way too long when it was shutting down. Today when I turn it on, it stuck half way through the loading bar. I restart a dozen time and it just stuck. need some help!

http://support.apple.com/kb/TS2570 Mac OS X: Gray screen appears during startup

Firmware update problem-- my macbook pro will not start

I think I took my finger off the power button and then put another finger down which turned my macbook pro off when I was installing some kind of firmware update... all I get now is a blank screen but the power button is on and it "feels" like something is going on inside but nothing... can some help? Thanks

I did explain how long to hold down the 'C' key in a previous post. Anyway, you should hold it down until you see the start up screen.
You could have a dirty or even a bad install DVD. If you could try it in another machine that would let you rule that out as a suspect. It's also possible that your DVD drive is damaged or bad. At this point it sounds like a trip to an Apple Store is in order.
Good Luck!! And please post back with your outcome, it might help someone in the same situation.
Edit: Did a little more checking around and found that this may be a common problem as in this other post...
http://discussions.apple.com/thread.jspa?threadID=963645&tstart=330
Could also be related to this...
http://www.retrodata.co.uk/noticeapple_seagatedrives.php
Either way, like I said above it sounds like a service call is in order.
Again, Good Luck!

MacBook Pro's fans start running at high speed when the computer is asleep. Normal?

The other night, my MacBook Pro's fans started running at high speed when the computer was asleep. Loud enough to wake me up. And this just kept on going until I finally decided to turn the computer off. Is this normal? Is this anything to worry about?

This is not normal. See if a SMC reset solves the problem:
http://support.apple.com/kb/ht3964
Ciao.

When trying to install os x mavericks to my macbook pro as it started to install the computer now is stuck with the OS X Mavericks intall showing and I can't get out of it or force quit?

When trying to upgrade and install OS X Mmavericks to my Macbook Pro as it started to install the computer stopped the install and now is stuck with the OS X Mavericks intall window showing and I can't get out of it or force quit? I can not do anything else because this is stuck with this window/install screen showing. I have tried everything to get back to my regular desktop. I do not want to wipe the drive because I have photos on it that I want to save. So if there is any way to bypass this installer and get back to my regular desktop I would greatly appreciate the help.

UPDATE* Macbook7,1
Mavericks 10.9.4
8GB ram

My MacBook Pro beeped when I started up. Never happened before. I want to get it looked at, but I'm living in Antalya, Turkey right now. I will be in Athens, Greece until January 1st-are there any Apple stores in Athens? Please help. Thank you.

I have a mid 2012 MacBook Pro and it started to beep for the first time when I started up today. I think it was 3 continuous beeps then a pause. It sounded like an alarm and totally freaked me out. Then I pressed the on/off button for about 5 seconds and it restarted. I was able to get online, but then I had trouble with the trackpad, which is okay now. I have AppleCare and want to take it to an Apple Store, but I'm currently residing in Antalya, Turkey. I will be in Athens, Greece until January 1st. Are there any Apple Stores in Athens, Greece that I can take it to or Antalya, Turkey??? Thank you.

https://locate.apple.com/gr/el/

My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg():Socket is not connected

My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg(): Socket is not connected

If running 10.7 or later hold down Command-R at Startup.
This should invoke recovery Mode.
Choose Disk Utility.
Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
If errors, run again until it comes clean or gets stuck.
Report any error messages.

HT4436 i have a problem with my Macbook Pro. When i tried to open it, something appeared : "enter your system lock PIN code to unlock this Mac". What should i do?

i have a problem with my Macbook Pro. When i tried to open it, something appeared : "enter your system lock PIN code to unlock this Mac". What should i do?

Question is did you lock your Mac from Find my iPhone using iCloud or is the Macbook really yours?
If you have in fact locked your Mac using Find my iPhone on iCloud then you will need to enter the PIN you have set when you locked the Mac.
*If you have not iniate the remote Lock then someone else has used your Apple ID and Password to lock your mac.
Message was edited by: Ammadz

I can not install xp through boot camp, the team just bought yesterday, is a macbook pro 13 when my old computer did it without problem with the same install disc

I can not install xp through boot camp, the team just bought yesterday, is a macbook pro 13 when my old computer did it without problem with the same install disc

There are no XP or Vista drivers for the new Apple computer hardware. Apple stopped XP and Vista support. http://support.apple.com/kb/HT4410.

My MacBook Pro won't start it just goes beep beep beep when I press the power button

My MacBook Pro won't start it just goes beep beep beep when I press the power button

Hi Csound1,
I haven't added any RAM my daughter was using the computer then it hung so powered it down then the beeping started. Do you know if there is a combination of buttons I can press when powering up that will put me in some kind of safe mode so that I can find out what's up, I tried pressing D when the beeping started but it didn't make a difference.
MC

MacBook Pro does t start I turned it off during start up I've tried a lot of stuff. When I hold startup my hard disk says efi boot instead of Macintosh hd

MacBook Pro does t start I turned it off during start up I've tried a lot of stuff. When I hold startup my hard disk says efi boot instead of Macintosh hd

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If this does not work, then you will have to erase and reinstall Mountain Lion:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

I have an Apple MacBook Pro and when surfing the web my computer will slow to a crawl and I will have a multi-colored spinning wheel visible until my latest request is handled. What is causing this and is there a way to prevent this from occuring

I have a MacBook Pro. When surfing the web it will eventually slow to a crawl. When this occurs, there will be a small multi-colored wheel spinning until my latest command is handled. What is causing this and is there a way that I can modify or prevent this from happening? Is there a setting that will prevent this?

When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

TS3423 17" macbook pro won't start blue file with question mark is all that appears on the screen

My old macbook pro will not start up. Worked fine yesterday, today all I gat is the startup sound and a blank blue screen. After a while the screen shows a file folder icon with a question mark in it. Any ideas

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
Boot From The Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

MacBook Pro Problem when Starting OS X

Similar Messages

Maybe you are looking for