Macbook Pro recording sound from external radio

Hi all,
Wondering if anyone can give me some advice on how I can record an external digital radio with my Macbook Pro. As a backgrounder, I am able to do it on my old white Macbook because it has a line-in port, so I just connect a 3.5mm cable from the radio to the Macbook and then I have software (Audio Hijack Pro) to hijack and record it.
However, as we all know, the new Macbook Pros have done away with the line-in port. And the Sound options in System Preferences don't seem to have a function allowing me to fiddle with the headphone port (apparently, earlier models had a function in System Preference that allowed you to turn the headphone port into line-in) but this new model doesn't have that option anywhere.
So I'm wondering if anyone can tell me whether the USB ports or even Thunderbolt can RECEIVE sound from an external device such as a digital radio. I have seen cables that are 3.5mm to USB so I think getting the cable to connect the radio to the Mac is possible, but will it actually receive the sound or just do nothing? Or is there some other way I can record an external device I'm not thinking of, bearing in mind I don't want to use the Mac's microphone to do it, as I will of course get all other ambient sound in the room at the time, and I don't want to rely on an internet stream of said radio.
Thanks,
Joe

u2hmtmkmkm wrote:
What if it was a digital radio, would that make things easier by way of using just a 3.5mm to USB cable? Especially because a quick search of a USB Audio Interface brought up some expensive results.
Also, as a possible alternative, after some extensive research online, I've found an iMic USB Audio Device by Griffin that is essentially an adaptor with a USB cable on one end and a Line In port on the other, thus allowing me to connect a 3.5mm to 3.5mm cable from the digital radio to the adapter, and then the adapter goes into the MBP USB port. It's on Amazon and it claims to function as a way to plug microphones and other external audio equipment to it. It seems pretty straightforward, which sometimes has me thinking it's too good to be true.
The output from your radio is analog, regardless of whether the radio is 'digital' or not.
You need a USB audio interface. The iMic is a USB audio interface.

Similar Messages

Macbook Pro - No Sound from internal speakers + No red light

Okay so I know this a very famous issue (I've seen over a hundred threads with people having the same problem) but the problem I'm having is something I haven't seen anywhere else. I recently tried to fix my headphone jack on my Macbook pro early 2008 model when it DID have a red light emanating from it but when I finally managed to turn it off with a little wiggle from my paperclip the sound still didn't turn back on. In my system prefs my sound output still displays "Digital Out" and no other option for internal speakers. I know my speakers are fine because I can hear the startup chime. Also, I had a broken piece from my headphones stuck inside the jack a few years back and I retrieved it in....let's just say, not the most professional way to do it (I completely destroyed my headphone jack while attempting to retrieve the broken piece and now the hole is too wide for any headphones), though afterwards the internal speakers still worked for a while, it was just the headphone jack that was messed up.
Basically what I'm trying to say is: is there a way to enable my internal speakers without using any hardware methods? Because I tried the paperclip fix and the red light did turn off, but still no audio + sound prefs still shows 'digital out'. I really don't care much for the headphones jack anymore because I'll just override it with some USB headphones.
Thanks in advance
Some Images:
'Only displays Digital Out'
'My jacked up headphone jack (no pun intended, although very relevant)'

I agree Nick - it is a concern especially on such a basic function (sound) - Linc is right, the issue is microswitch, sounds like a bad design or a huge batch of sub quality switches, checking the forums this issue is common on MBP's.
Judging by the date and lack of further activity I assume you managed to get yours fixed at the genius bar ?
I finally fixed mine myself but posting reply for others who have same issue as this - however buyer beware folks, try this at your own risk !!!
The fix won't be liked by Apple Support, the genius bar, or the repair shops but it worked for me after over 12 months of using headphones / external speakers - WHAT A PIA !
Method -
Held Macbookpro on it's side with screen open and headphone/ audio port facing toward ground.
Took WD40 can with straw dispenser and placed straw inside audio port - sprayed 3 or 4 one second burst of WD40 into port.
Held MBP that way for 30 seconds giving MBP a shake to drain WD40 out
(I performed this whole excercise outside where the WD40 could drain out without an issue ;-)
I then took an old set of headphones and re-inserted / removed them from the audio port approx 20 times in and out with music playing on the MBP - intially when inserted music will only come from headphones then eventually MBP internal speakers start working !
I've tried everything else including the cocktail stick and bent pin inserted inside the port to try and free micro switch - nothing worked it was stuck fast.
As stated, can't endorse this for anybody else - you do so at your own risk - just stating this is what I did to get mine working again !

HT2494 2012 MacBook Pro - no sound from internal speakers, red light in headphone port

Mid 2012 MacBook Pro 15".
I normally use external speakers plugged into headphone jack.
The other day I unplugged the external speakers and when I re-booted my Mac, I got the start up sound
but I have no sound coming from my internal speakers. In System preferences sound output I see no entry for internal speakers.
I also notice a red light shining in the headphone jack port. I see on youtube that this problem is rather widespread.
Some suggest using a paper clip to try to turn the light out, but I am not doing that.
I have Lion installed, tried using the MIDI-app to reconfigure the speakers, but I only get sound if the headphones are plugged in.
Is this a software or hardware problem?
I have a genius bar appointment today at my local Apple retail store, and my mac is still on warranty but this
is troubling that you spend $2300 for a laptop and after a bit of regular use the internal speakers no longer work.
Any ideas?
thanks.

I agree Nick - it is a concern especially on such a basic function (sound) - Linc is right, the issue is microswitch, sounds like a bad design or a huge batch of sub quality switches, checking the forums this issue is common on MBP's.
Judging by the date and lack of further activity I assume you managed to get yours fixed at the genius bar ?
I finally fixed mine myself but posting reply for others who have same issue as this - however buyer beware folks, try this at your own risk !!!
The fix won't be liked by Apple Support, the genius bar, or the repair shops but it worked for me after over 12 months of using headphones / external speakers - WHAT A PIA !
Method -
Held Macbookpro on it's side with screen open and headphone/ audio port facing toward ground.
Took WD40 can with straw dispenser and placed straw inside audio port - sprayed 3 or 4 one second burst of WD40 into port.
Held MBP that way for 30 seconds giving MBP a shake to drain WD40 out
(I performed this whole excercise outside where the WD40 could drain out without an issue ;-)
I then took an old set of headphones and re-inserted / removed them from the audio port approx 20 times in and out with music playing on the MBP - intially when inserted music will only come from headphones then eventually MBP internal speakers start working !
I've tried everything else including the cocktail stick and bent pin inserted inside the port to try and free micro switch - nothing worked it was stuck fast.
As stated, can't endorse this for anybody else - you do so at your own risk - just stating this is what I did to get mine working again !

Macbook pro cant boot from external dvd device please help !!!!

hello everyone please help me i have macbook pro 2011 core i5 version
i just installed 2.5 ssd as second hdd
i cant boot from external dvd device to install any os the external dvd keeps on spining and mac is just thinking it doesnt show press any key to install
it shows the device when a boot into mac parition
i am trying to install windows on origianl 500 gb hdd and linux on ssd
but not luck
the external dvd drive works i pluged into my pc and it works
please help thansk in advance
200 gb mac
300 gb windows
120 ssd linux

I do not know about Disk Warrior but if you have a compatible OSX on an external HDD you certainly can boot the MBP. Use startup manager:
https://support.apple.com/en-us/ht1310
Ciao.

Recording audio from external radio

Is it possible to plug my external radio into the iPad and then do scheduled recordings of radio shows?
I am currently doing this with my iMac and Audio Hijack Pro. I am looking for something similar with the iPad.

There are a number of apps available that can record through the audio input. Whether any of them can be set to record on a schedule, though, I don't know. I haven't found anything that will do that, but I might easily have missed something in the App Store that would do what you want.
Regards.

Macbook Pro no sound from internal speakers or headphones

I have a macbook pro (mavericks). There is no audio coming from the internal speakers and when headphones are plugged in there is still no sound. There is no red light coming from the headphone port either. Any advice?

Try plugging the headphones in and out 10-12times, while toggling the volume and mute buttons.
Have you tried cutting the end off a cotton swab and GENTLTLY swabbing the the headphone swabbing the port 9;00 clock to 3:00 clock, there is a micorswitch that some times gets "hung up" and this can free up the witch.
Also you can try going to to applications/utilities/ Audio MIDI Set up. app and see if you can select built in there.
To get more aggressive you can try these options:
Close all windows and quit all applications.
Click "Go" menu in the Finder menubar.
Select Computer, then Macintosh HD > Library > Preferences
Open "Audio" folder.
Right click these two files and select "Move to Trash".
com.apple.audio.DevicesSettings.plist
com.apple.audio.SystemSettings.plist
Close the window. Restart the computer
Go to Applications/Utilities/Audio MIDI Setup/Built-In Output/Output and in Format change from the default 2ch-24bit integer to any other format (say, 2ch-32bit float). This should activate the headphone jack. I moved the format back to the original 2ch-24 integer setting and the headphones continued working. So it seems that (for some reason) the original default setting does not recognize a headphone being inserted, but after performing this "resetting" it seems to come to its senses and behave properly from then on
if these do help your issues, please post back, there may be other options.
It is best to start a new post, rather adding on to an already existsting, as you will get more people looking at it, and thus offering more advice/sugestions.

My macbook pro only boot from external drive

Hi, my macbook pro had a problem, some day way extremely slow, and i restarted it, when it was booting the little apple turned into a a circle with a slide cros and then into a folder ... and then into the apple.. and so.. many times... i tried to start in text mode.. and it said fail loading kernel..
and i tried everythin but couldnt make it work... until i extracted my hard drive, and plugged it in the same macbook pro using a usb adapter... and it worked.... does anyone knows what the **** is going on??.. and how can i fix it.. is a middle 20009

Did you run fsck while booted into single user/verbose mode?
Run Repair Disk:
First check the S.M.A.R.T.status on your HD: Applications > Utilities > Disk Utility > in thepanel at left, select the first item in the list/your HD mechanism > look atthe bottom of the main window next to S.M.A.R.T. status and see if it says“Verified” or something more ominous like “Failing.”
If S.M.A.R.T.status is "Verified," run Repair Disk: Boot from install disc (insertdisc > restart > immediately hold down c key and keep holding it untilyou see “Preparing Installation”) > at first screen select the language andclick Continue > click on the Utilities Menu in the menu bar > open DiskUtility > select your HD in the panel on the left side> click Repair Diskat bottom of main window. Run this at least twice, and keep running it until itsays “appears ok” twice in a row. If that doesn’t happen, you may need astronger utility such as DiskWarrior or if the directory is damaged beyondrepair, you may need to reinstall the OS, or you may have a damaged HD (repairutilities can only repair the directory structure, not the HD itself). Whenthis is finished, quit Disk Utility, quit the installer, and restart. Oncebooted normally, go to Applications > Utilities > Disk Utility and runRepair Permissions.

How to get iMovie 11 to record sound from external mic

I'm using iMovie 11 and have an external video camera attached (this works fine) and an external high quality USB mic.The mic shows in the Systems Preferences and is checked. The mic also shows in the iMovie menu and is checked. However when I import video, iMovie defaults the sound track to the internal mic. Can anyone tell me what the problem might be. I'm using OS10.6.8 on Powerbook Intel Core2

Hi
You must do this the right way.
• EXTERNAL Hard disk - MUST - be Mac OS Extended formatted
Nothing else will do - for VIDEO !
• The Moving of Event's and Project's - Must be done within the iMovie Application
Folders named iMovie Event's and iMovie Project's - can not be moved via Desktop/Finder - as links back to iMovie will break and can not be mended.
My general note on this:
Moving Event's and Project's
Connection - Either connect one Mac in Target mode to the other via FireWire. Or use an external hard disk !
(Target-Mode - Start one Mac e.g. laptop - BUT keep T-key down during full up-start - Now a FW-symbol is jumping around the screen and it will work as an external hard disk when connected to the other Mac)
A. The External Hard Disk - MUST BE - Mac OS Extended (hfs) formatted to work for Video. UNIX/DOS/FAT32/Mac OS Exchange works for most other things but not for Video whatever program is used (iMovie or FinalCut)
B. Should be a FireWire one as USB/USB2 performs badly to me and especially when filling up
C. Do never Move or Alter any folder named
• iMovie Event's - or -
• iMovie Project's
on DeskTop/Finder - as this will result in iMovie losing connections to them and repair can be anything from hard to impossibly.
D. Moving and Copying must be done within iMovie application and Events to Events - and - Project's to Project's.
E. Moving Project's to Event's - Do not work for me - I have to export project as a QuickTime movie then Import this into Events.
Event's window can show two faces
Like this
or like this
from one hard disk Event - You can move it to the other hard disk
You can not (at least not me) move Event to Project or other way around only
Event to Event and Project to Project
Yours Bengt W

Macbook Pro and sound from miniDVI-HDMI

At what time did MBP start sending sound through the DVIminiport.
In other words: when I get no sound connecting to my TV with a HDMIadapter: Is it the port or the adapter that is at fault??

Ok. Below is a reference to an apple article that lists MBP's that started carrying audio on their mini-displayport.
About Mini DisplayPort to HDMI adapters
It says mid 2010 and later for MBP's.
So where does that place "April"? Well I am inclinded to believe that is not "mid 2010" so your MBP probably does not pass audio on its mini displayport. That means you have to use the analog 3.5mm head phone audio out or you can use an adapter that combines the mini-displayport video with digital audio from USB.
Mini Displayport Male | Thunderbolt® and USB Male Audio to HDMI® Female Converting Adapter

HP Mini 110-1160SA problem recording sound from sound card

I am trying to record sound from the sound card itself rather than an external or internal microphone, using a free software called Sonarca Sound Recorder. For example, I play radio from the internet using the BBC Iplayer. I have Windows 7 Starter. When I use the Windows Control Panel > Hardware and Sound > Manage Audio Devices, I get a window called Sound. I press the Recording tab, and get a choice of Internal Microphone, External Microphone, and Stereo Mix. According to my sound recorder software's documentation, I need to select that Stereo Mix, because it means "record whatever the sound card is playing". However, the Stereo Mix recording device, despite having a red tick mark next to it is "Currently Unavailable". How do I make it available?

to be honest, i am not sure about your problems, normally, you need to set stereo mix as default device, then using recording devices to record sound on windows 7. Since you cannot make it, why not insall a virtual sound device, it works like a real one, install this streaming music recorder on your system, start recording. Just test it out by yourself.

How to Make my Macbook Pro's internal HDD external, when I get a SSD?

Hey, I know there are other posts on what enclosure you can use and if it's a possibility, but I haven't seen any that tell me how I get OS X on the SSD without a disc? Can I download the installer on a flash drive somehow? Also, I am wondering if this really is a good idea, using my Macbook Pro's HDD for a backup HDD, instead of buying one? I have no use for it anyway, if and when I get a new SSD. BTW, the HDD is the upgraded factory 500gb 7200rpm. Also, do you think it's smarter to have a bigger backup drive than internal drive? In other words, I would like to get a 1TB Samsung 850 Pro SSD, and my current HDD is only 500GB.... I am a musician and need a lot of storage for musical purposes. I use Final Cut Pro, Logic Pro X, Ableton Live 9, Office, and Photoshop.... My Macbook Pro is a Late 2011 Macbook Pro 15.4' 2.2ghz quad core i7 8gb RAM. Oh yeah and a mother thing is, I think I should get an enclosure that has a thunderbolt port with usb, what are your thoughts?

How to Make my Macbook Pro's internal HDD external, when I get a SSD?
Get an externel enclosure at the same time.
You can order from OWC
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Put the SSD in the externel enclosure and use something like Carbon Copy Cloner, to clone the internal drive and all it content to the SSD. Then swap them out.
Always good to have more than one backup.

Recording sound from DVD and CD play

I just bought a Zen V Plus. Could someone please tell me how to record sound from a DVD and/or CD to my MP3? Thank you!

Try this:
1. Connect the Line IN jack on your player to the line output of an external stereo source, such as a CD or MiniDisc player, using the supplied line-in cable.
2. Press the Back/Options .You may need to do this more than once until the main menu appears.
3. Select Extra button to start a line-in encoding.
5. On your external stereo source, start playing the song you want to encode.
6. While encoding, you can press and hold the Back/Options button and select one of the following items:
Pauses the encoding. You can also pause the encoding by pressing the Play/Pause button.
Stops and saves the encoding. You can also stop the encoding by pressing the Record
Split Ends and saves current recording session, and begins a new one.
7. Press the Record button to end the line-in recording. The recorded track is named LINE followed by the date and time of the recordin YYYY-MM-DD HH:MM:SS<. For example, if you record a track on March 5, 2004 at 2:57 pm, the track is named LINE
This information can also be found in your user's guide, it's a .chm file found in your installation cd.

My macbook pro 15' sound is not working, every time i turn on the internal speakers they just turn back off, and i have already tried putting in my headphones 5 or 6 time

my macbook pro 15' sound is not working, every time i turn on the internal speakers they just turn back off, and i have already tried putting in my headphones 5 or 6 time

Hi eleni_georgia,
Welcome to Apple Support Communities.
The article linked below provides some additional tips that will help you resolve the audio issue that you described.
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/TS1574
Cheers!
-Jason

Recording sound from the PC

I am currently running a mixer into the front audio input jack on my PC, and have all external stuff (mic, mini disk, etc) coming through that.
Am I able to set up audition so that it can also record sound from the PC. For example, if I want to grab audio from a you tube video, or have an online voice chat or something enabled, can I open audition and record it? I have tried, but not been successful. My only idea is having to run the audio out of the PC, into a channel in the mixer, and then back into the PC with everything else.
Any help?

Evergyro wrote:
Where is the link?
This so-called 'forum' has absolutely no use for its FAQs any more. Fortunately, AudioMasters has saved them all, and you can find that particular one here.

Is there a way to record sounds from keyboard as they are?

So I have a musical keyboard that I've attached to my macbook to record in Garageband. I have a ton of sounds on my keyboard from percussion, brass, piano, etc.
When I record, for example, a trumpet sound from my keyboard into Garageband, Garageband just records the notes using its one version of trumpet or piano or whatever.
How do I get GarageBand to just record the sound as is?
I tried the "real instrument" track option but that ends up record all sound from the microphone on the MacBook and not recording the sound through the MIDI connection.

goneil wrote:
Is there a way to record sounds from keyboard as they are?
http://www.bulletsandbones.com/GB/GBFAQ.html#recordkeyboardssounds
(Let the page FULLY load. The link to your answer is at the top of your screen)

Macbook Pro recording sound from external radio

Similar Messages

Maybe you are looking for