Macbook Pro "Recovery 10.8" takes to load forever and doesn't boot

I am stuck and my macbook pro wont boot
- Found some other options online, and they said to reboot then hold option key while starting it up. This will lead to the "Mackintosh HD"and "Recovery 10.8"options,
- Since my Makintosh HD was gone, only Recovery 10.8 option was left
- I clicked Recovery 10.8 option and took me ages to load, I even left it during the night because I thought that it is normal to take that long to load, but it doesnt seem right. I woke up the next morning and it is still loading
And this is when my problem

I am stuck and my macbook pro wont boot
- Found some other options online, and they said to reboot then hold option key while starting it up. This will lead to the "Mackintosh HD"and "Recovery 10.8"options,
- Since my Makintosh HD was gone, only Recovery 10.8 option was left
- I clicked Recovery 10.8 option and took me ages to load, I even left it during the night because I thought that it is normal to take that long to load, but it doesnt seem right. I woke up the next morning and it is still loading
And this is when my problem

Similar Messages

  • Macbook Pro starts up, has a small loading bar, and then shuts off.

    Macbook Pro starts up, has a small loading bar, and then shuts off after a few seconds, but the Windows bootcamp partition works fine.
    The repair disc option (using install disc) failed, and the computer cannot locate the original Mac side partition. Only Bootcamp appears under options to "restore from backup" or reinstall. The repair disc options says it should be repaired but doesn't seem to know how.
    Macbook Pro.
    Snow leaopard
    Bootcamped with Windows.
    Any ideas?

    Hold c or option key and boot off the 10.6 installer disk, run DU Repair from there.
    run through this list of fixes 1-8
    Step by Step to fix your Mac
    If it doens't work, you can recover files if you don't have any current OS X file backups, then grab what you can out of Bootcamp
    Use Data Rescue installed on the extenral boot drive ($100) to read the bits of the internal (non-filevaulted) drive to retrieve OS X data files if you can't get them off manually via drag and drop methods.
    Create a data recovery, undelete boot drive
    If you want to clone Windows, use WinClone and another drive. However it's likely compromised, unless it something you did in Windows, like trying to create a new parttition perhaps?
    Then perform a Zero Erase and install of 10.6 as shown here (on the entire drive, not only the parittions), this will give a new GUID partition table, EFI and map off bad sectors, totally fresh everything.
    How to erase and install Snow Leopard 10.6
    You cna use Carbon Copy Cloner to clone the new extenral setup to the new scrubbed internal drive. Recreate Bootcamp and WinClone back or fresh install Windows into Bootcamp like before. OR opt to use virtual machine software which is safer.
    Windows in BootCamp or Virtual Machine?
    Windows 7 can write to the boot drives GUID partition map (unlike XP), this is likely why it's borked now.

  • Is there a display for my MacBook Pro retina that isn't made by apple and doesn't cost the world?

    Please tell if there is a display for my MacBook Pro retina that I don't have to pay tons for and will connect to my laptop!

    I just plugged my 13" MBPr in to a cheap 24" 1080p BenQ using a Display port to DVI adapter and it works fine, crisp enough for my eyes and for around £115 a bargain.
    edit: Picked it up from Amazon on a free next day delivery with Prime.

  • Power on MacBook Pro takes me to login screen. All user icons appear as normal. Once I enter password for myself (administrator) spinning takes longer than normal and doesn't log in but displays a no sign

    Power on MacBook Pro takes me to login screen. All user icons appear as normal. Once I enter password for myself (administrator) spinning takes longer than normal and doesn't log in but displays a no sign (circle w line through it) when attempting to login from guest account it takes me to screen that says that the computer will restart to a safe safari system for the guest user. I waited for a longer time and the grey denim screen comes up. By the apple in left upper corner it said I think LSA? Then safari menu bar. The page it loads to us file:///System/Installation/CDIS/Mac%2005%20X%20Utilities.app/Contents/Resource s/English.iproj/GuestLoginInfirmation.html
    Can someone HELP? I'm afraid I might do something wrong

    What backups do you have?

  • MacBook Pro was having Finder/Freezing issues, Tried restarting and now it wont reboot. Been stuck at the apple logo/loading screen for over an hour.

    MacBook Pro was having Finder/Freezing issues, Tried restarting and now it wont reboot. Been stuck at the apple logo/loading screen for over an hour.

    Step by Step to fix your Mac
    Create a data recovery, undelete boot drive

  • I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable.  I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

    I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable.  I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

    Download the supplemental fix to 10.7.5 
    http://support.apple.com/kb/DL1599

  • My MacBook Pro hard drive crashed a little while ago and has been replaced.  Is it possible to take tunes from iPod Classic and transfer all of them back to iTunes on computer?

    My MacBook Pro hard drive crashed a little while ago and has been replaced.  Is it possible to take tunes from iPod Classic and transfer all of them back to iTunes on computer?  Is this just for purchased tunes or can I do it for ones that have been burned from CD's as well?  Thanks for any help!

    [Zevoneer's detailed instructions on getting music off an iPod|http://discussions.apple.com/message.jspa?messageID=9053179]
    [Wired's How To: Get Your Music Off of Your iPod|http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod]
    [http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipod-window s-mac-os-x/]
    [Topic: Get music off iPhone|http://discussions.apple.com/message.jspa?messageID=11512841]
    [Copying iTunes Store purchases from your iPod or iPhone to a computer|http://docs.info.apple.com/article.html?artnum=305465]

  • My gmail doesnt load on my macbook pro anymore, only able to fully load with the html version. Anyone share the same problem?, My gmail doesnt load on my macbook pro anymore, only able to fully load with the html version. Anyone share the same problem?

    My gmail doesnt load on my macbook pro anymore, only able to fully load with the html version. Anyone share the same problem?, My gmail doesnt load on my macbook pro anymore, only able to fully load with the html version. Anyone share the same problem?
    It loads till the almost the end of the bar and just stops there.

    I'm having the same problem. It just freezes and wont load the rest of the way.

  • HT5616 Why won't my MacBook Pro 10.9.2 take my Apple ID to sign into iCloud?

    Why won't my MacBook Pro 10.9.2 take my Apple ID to sign into iCloud?
    I've verified my Apple ID and iCloud is working on my iPad with this same Apple ID.
    THANKS.

    I have the same problem. After updating to 10.9.2
    My ipad and iphone works perfect. It's a certificate problem. Try to reset the keychain http://support.apple.com/kb/HT5813
    Didn't work for me, so I'm calling apple support or maybe reinstall maverick if they can't solved it
    Maybe it works for you :-)

  • MacBook Pro turns on but will not load. Battery will power up and charge. The PRAM second start up seems to work, but the Apple timer continues add-infinitum. There is also a disc in the laptop so I can't load re-load software OS 10.6.1. How do I resolv

    MacBook Pro turns on but will not load. Battery will power up and charge. The PRAM second start up seems to work, but the Apple timer continues add-infinitum. There is also a disc in the laptop so I can't load re-load software OS 10.6.1. How do I resolve this problem?

    Try booting in Safe Mode by holding your Shift key down when booting. Also, try holding the eject key down when booting to eject the DVD. If you plug a mouse in and hold the clicker down when booting, that should eject the DVD.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • How long does it take for a macbook pro to start , mine takes about 1 mn is this normal?

    how long does it take for a macbook pro to start , mine takes about 1 mn is this normal?

    Details of your specific hardware/software setup are in play, of course.
    But, yes, that sounds normal.
    charlie

  • Is it possible to sync your nano with the macbook pro without losing the songs already loaded on the nano?

    Is it possible to sync your nano with the macbook pro without losing the songs already loaded on the nano?

    Not if it's not the original computer you registered it on. 
     

  • Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution

    Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution?? please...

    Back up all data before proceeding.
    This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
               ▹ Restart
    from the menu bar.

  • My macbook pro i7 (2011 version) has a loud fan and high cpu % when I have Skype on or when I am on Safari. Help please!

    My macbook pro i7 (2011 version) has a loud fan and a high cpu % when I have Skype on or when I am on Safari. My laptop would sometimes freeze for a while and it is usually hot. Has anyone else encounter this problem and know how to fix it? Thanks!

    Skype is a very resource intensive activity...it has been reported on here users are seeing cpu temperatures on the order of 80-85 °C, within the limits of the cpu, but still hot to the touch.
    Make sure nothing else is running so you keep the thermal load down.

  • What antivirus protection should I purchase for my MacBook Pro? MacSecurity.app appeared on my desktop, and I downloaded that. Since then, it has said my computer is infected and pop-ups have been appearing.

    What antivirus protection should I purchase for my MacBook Pro? MacSecurity.app appeared on my desktop, and I downloaded that. Since then, it has said my computer is infected and pop-ups have been appearing.

    You've been infected by a scam trojan.  You don't need any anti-virus software on your Mac.  See the following about getting rid of the trojan.
    Trojan War
    If you discover a trojan program is running on your computer then look to the following information for assistance:
    1. A recent discussion on the Apple Support Communities: MacDefender Trojan.
    2. An excellent site devoted to Mac Malware: Macintosh Virus Guide
    3. Another site for removing MacDefende, et.al.: MAC Defender Rogue Anti-Virus analysis and Removal
    4. A new removal utility - MacDefenderKiller
    Removing strange software can be a task.  The following outlines various ways of uninstalling software:
    Uninstalling Software: The Basics
    Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash.  Applications may create preference files that are stored in the /Home/Library/Preferences/ folder.  Although they do nothing once you delete the associated application, they do take up some disk space.  If you want you can look for them in the above location and delete them, too.
    Some applications may install an uninstaller program that can be used to remove the application.  In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
    Some applications may install components in the /Home/Library/Applications Support/ folder.  You can also check there to see if the application has created a folder.  You can also delete the folder that's in the Applications Support folder.  Again, they don't do anything but take up disk space once the application is trashed.
    Some applications may install a Startup item or a Log In item.  Startup items are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder.  Log In Items are set in the Accounts preferences.  Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab.  Locate the item in the list for the application you want to remove and click on the Delete [-] button to delete it from the list.
    Some software use startup daemons or agents that are a new feature of the OS.  Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
    If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.  Unfortunately Spotlight will not look in certain folders by default.  You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead.  Download Easy Find at VersionTracker or MacUpdate.
    Some applications install a receipt in the /Library/Receipts/ folder.  Usually with the same name as the program or the developer.  The item generally has a ".pkg" extension.  Be sure you also delete this item as some programs use it to determine if it's already installed.
    There are many utilities that can uninstall applications.  Note that you must have this software installed before you install software you may need to uninstall.  Uninstallers won't work if you install them after the fact.  Here is a selection:
    AppZapper
    Automaton
    Hazel
    CleanApp
    Yank
    SuperPop
    Uninstaller
    Spring Cleaning
    Look for them and others at VersionTracker or MacUpdate.
    For more information visit The XLab FAQs and read the FAQs on removing software and dealing with spyware and malware.
    After removing all the components of the software you may have to restart the computer to fully disable the software.  This will be the case when removing software that has installed a daemon.  After the daemon has been removed you need to restart the computer to stop the daemon.  Alternatively, you can kill the daemon process using the Terminal application or Activity Monitor.

Maybe you are looking for

  • Cluster Installation - SQL 2005 / 2003 - Creating cluster group

    Hi All, I am working on the cluster Installation in our environment and facing some issues at the time of installing first node MSCS  Installation. let me summarize the activities done so far Environment Details Physical Disk : G: (Physical Disk - SA

  • Pages and icons (in the tabs and navigation bars) are too big due to 22 upgrade

    Due to FF22 upgrade (from 21), all my icons (from webpages, addons and regular buttons) and tabs have got bigger and that's really ugly because of the low resolution of the images. Also considering I have a rather big number of tabs I can just see a

  • How to post actual in WBS element.

    Hi There, I have one typical situation here. My company dont have Project system in SAP. now they are implementing PS. They wanted to bring all projects and Wbs element in SAP They have budget on XYZ wbs elemnt is about 150,000 USD. and they have spe

  • Cannot register iPod - help!

    i got an iTouch for my birthday, and i tried to connect it to my computer. It gives me the option to register it, but i can't find the button to register it. i only see a button that says 'register later.' it starts to cut off the words, like if ther

  • Portal User Export without Roles!

    Hi, On NW04 EP6  SP18.   When I run a user export no role information is exported I assume it should be...anyone seen this issue in this version and know how to fix it? cheers J