Macbook pro rejects all cds

My macbook pro rejects all cds, but will accept dvds. What can I do? I have system 10.6.8. Thank you.

Tried another maker?
By all cd's do you mean music cds, data cds too?

Similar Messages

My macbook pro ejects all cds

my macbook pro ejects all cds
i have updated my macbookpro to lion and after this it does not exept any dvd and cds any more

Most often this is caused by dust on the Laser lens. I suggest you take a credit card and put only part way into the slot and get a can of compressed Air and go back and forth in the slot and restart your computer and try again

Macbook Pro rejects all discs after installing Snow Leopard

Topic title pretty much sums it up. After Upgrading my late 2009 15" 10.5.8 Macbook Pro to 10.6.4 the disc drive decided to stop working. I've tried three different discs, no success. When i put a disc in, it speeds up but after a few seconds it just spits it out again. Discs never appear in Finder.
Any ideas? Help would be appreciated, thanks.
-K

HI,
If you haven't repaired permissions after the upgrade, that may help.
Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

Hard Drive Failed, MacBook Pro Rejecting Replacement

On Thursday night my MacBook Pro (2010, 13'') froze and wouldn't respond, so I powered-off using the power button. Upon restart all I got was the Apple logo and the spinner; no matter how long I left it it wouldn't boot any further than that.
Booting in safe mode wouldn't work.
Booting in verbose mode and running fsck revealed several issues with the disk including bad blocks and corrupt data in the journal.
Booting from the installation disk and repairing using Disk Utility failed, as did trying to repair using fsck.
So, I installed OS X onto an external USB drive and managed to finally get the disk to mount in read-only mode after disabling journaling. I was then able to backup my data.
As my MacBook Pro is 14 months old and I didn't purchase AppleCare, I went out and bought a Hitachi Travelstar 320gb 7200rpm replacement on Saturday and fit it without any issue following the guide in the Apple manual.
This is where more issues arose. When booting from the installation disk and being presented with the language selection screen the trackpad and keyboard are not responsive at all. When booting from the external drive whilst the new drive is installed, once I'm at the login screen the trackpad and keyboard are unresponsive. However, when booting I can press C to boot from the CD/DVD and I can hold ALT to be presented with the boot drive selection screen where both trackpad and keyboard work flawlessly. So I can rule out the trackpad and keyboard being damaged. I can also back this up further because if I reinstall the damaged hard drive and boot from either an installation CD/DVD or the USB drive the trackpad and keyboard both work as expected.
I've tried resetting the PRAM; no change.
I've tried resetting the SMC; no change.
I've tried disabling the Sudden Motion Sensor; no change.
I've tried the new hard drive in an external enclosure with a different Mac and the drive is functioning fine.
So I'm totally stumpled. Why is the MacBook Pro rejecting the new hard drive? Surely this has to be some sort of compatibility issue, or deeper-lying issue? I've trawled the internet over the weekend but to no avail.
I'm booked in to see a Genius on Wednesday night but since the device is out of warranty I'm not holding much hope. The only things in my favour are Consumer law sighting it's not fit for purpose, nor has it lasted a reasonable amount of time. The fact that Apple don't provide a list of recommended hard drives anywhere or that the manual doesn't desuade you from manually replacing the drive yourself instead giving you a step-by-step guide.
Any help or advice would be greatly appreciated.
-Mic

Try getting the same hard drive as the one you pulled out.
It shouldnt be too hard to find.
As for your problem, I think were pretty much in the same boat. The same thing happened to my computer and all im getting is a white screen when booting from the new hard drive, yet putting the same one in an enclosure works just fine.

Macbook pro rejects snow leopard cd

macbook pro rejects snow leopard cd

Hello Michael,
If the system is able to run other discs then it is probably damaged installation disc. You can get one replacement media through Apple Service centers.
If the issue is with all discs then you might need to replace the optical drive.
Peace...

I bought Snow Leopard and my MacBook Pro rejects the disc. Trying to upgrade from Leopard in order to upgrade to Lion. Why is the disc being rejected before it even shows on the desktop?

Snow Leopard Update. I bought the updated but my computer - a MacBook Pro - rejects the disc befoe anything appears on the desktop. I am trying tp upgrade from Leopard to Lion. Does anyone know why this might be happening?
Thanks

You need to check to see if your machine can handle Lion, it needs 4GB and a Intel Core 2 Duo or better.
Download the free MacTracker and see more specifics of everything.
http://mactracker.ca/
Next, you must realize that your Rosetta PPC based programs will not operate under Lion, likely you will have to buy all new programs.
If you machine is dated, a lot of the trackpad gesture features you won't have.
Check the source of all your third party sofftware and hardware drivers for scanners, all-in-one's and the like to make sure they work or there are updates, or upgrades available and how much.
http://roaringapps.com/apps:table
IDEALLY, it's best to backup files and then "fresh install" Snow Leopard clean, then upgrade to Lion.
Also you should make a option bootable clone of Snow Leopard on a external drive, this will allow you to return if something doesn't work.
You can learn all of this and more at my exhaustive post here, enjoy.
https://discussions.apple.com/message/16276201#16276201

My Aperture 2.1 has gone into a continual thumbnail mode. I left the computer, a MacBook Pro, run all night, about 12 hours and it is still making thumbnails. I tried reloading Aperture 2.1, but that did not change anything. I have also turned the syst

My Aperture 2.1 has gone into a continual thumbnail mode. I left the computer, a MacBook Pro, run all night, about 12 hours and it is still making thumbnails. I tried reloading Aperture 2.1, but that did not change anything. I have also turned the system off, for a period of time, and then turning it back on, when I click on Aperture, it comes up and locks in the thumbnail mode. I can view my stored pictures, even modify them, but it still says thumbnails.
I got in this mode by trying to import "one jpeg photo", from a scanned slide using a Nikon Scan4 IS5000ED scanner. I had saved the scan to my desktop before I tried to import it.
Please Help, Maurice A Bird at [email protected]
Thanks

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

So in the last few days I've noticed that pressing my volume change keys actually isn't changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squar

So in the last few days I’ve noticed that pressing my volume change keys actually isn’t changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squares go up or down. I mute it but my computer still makes sound. It’s the same with the volume control up the top of the screen, too. I slide it up and down and it doesn’t change the volume at all. The only way I can change the volume is with my speakers or the program I’m in (iTunes, VLC etc). I restarted and it seems to be okay then I go to change it a couple minutes later and it’s back to not working again.
I’ve checked my settings- the “use all F1, F2, etc. keys as standard fuction keys” is not switched on, and I have tried a suggestion of moving the com.apple.systempreferences.plist file out of the library and onto the desktop and restarting and neither of those seem to make any difference whatsoever. I’ve tried to find online forums but the only suggestions I found were those two and they didn’t work.
I’m just annoyed because I usually have the worst luck with technology but my macbook had been going strong and I got it because of the apparent lack of things that could go wrong, but of course even if there is one thing that could go wrong it will happen to me.
Please help!

You migh give resetting your NVRAM a try:
http://support.apple.com/kb/ht1379

If my iphone, ipad, MAC and macbook pro are all linked, and then I upgrade only my phone to iOS 7.0, does that have an effect on my calendar, etc. It doesn't seem to be showing the same data it was before the update. Lost lot of info from calendar.

If my iphone, ipad, MAC and macbook pro are all linked, and then I upgrade only my ipone to IOS 7.0, does that have an effect on the linking to my other MAC products. It seems my calendar has lost a lot of information since the upgrade.

If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there.
searching the internet i found a link to upgrtade to 10.7
The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
Regards.

HT3819 I have a new apple MacBook Pro. All my music is on my old computer and on my I-Pod. Can I use home sharing to transfer my music onto my new computer?

I have a new apple MacBook Pro. All my music is on my old computer and my i-pad. What is the easiest way to transfer my music onto my new
computer?

apps
If you have an iPod touch or iPhone with iOS 4 or later software, or an iPad, you can use iTunes to transfer files between your computer and an app on your device that supports file sharing.
You might want to do this if, for example, you want to save files you create on your device to your computer, or take files with you so you can use them when you’re away from your computer.
You don’t need to sync your device to transfer files, but your device needs to be connected to your computer.
For information about supported apps, see the documentation for your apps.
Hide
To transfer files from your iPod touch, iPhone, or iPad to your computer:
Connect your iPod touch, iPhone, or iPad to your computer.
In iTunes, select your device (below Devices), and click the Apps button.
Below File Sharing, from the list on the left, select the app on your device that you want to transfer a file from.
From the list on the right, select the file you want to transfer, and click “Save to.”
In the window that appears, select the destination where you want to save the file, and click Choose.
The file is saved to the selected destination on your computer.
SImport music and video already on your computer
If you have audio or video files on your computer, you can import them into iTunes so that they appear in your iTunes library.
Hide
Here are ways to add items from your computer to your iTunes library:
Drag a file or folder from the Finder to the iTunes window.
If you add a folder, all the files it contains are added to your library.
In iTunes, choose File > “Add to Library,” locate a file or folder, and then click Choose.
By default, iTunes places a copy of each audio file in the iTunes folder (Home/Music); the original file remains in the current location. For information about adding an alias to the file (instead of creating a copy), see Add items to your library without copying them to your iTunes folder.

If i have Time Machine backed up on an external hard drive, do i just plug the drive into another macbook pro and all my stuff is in the new computer? also, does it matter if the new computer is running Lion when the backed up info came from Snow Leopard

If i have Time Machine backed up on an external hard drive, do i just plug the drive into another macbook pro and all my stuff is in the new computer? Also, does it matter if the new computer is running Lion when the backed up info came from Snow Leopard 10.6.8?

No and Yes
Don't use TM for this purpose, clone your drive to an external, plug the external into another MBP and reboot from it. Please note that booting a machine that came with Lion may not be possible from a drive with Snow Leopard.

Cant start up on my Macbook pro. All I get is a grey spinning wheel. Tried all the Startup key combinations and nothing works. I reset the NVRAM and nothing. I booted with start up disk , ran disk repair and all is ok. Tried to re-install OS but when I ge

Can not start up on my Macbook pro. All I get is a grey spinning wheel. Tried all the Startup key combinations and nothing works. I reset the NVRAM and nothing. I booted with start up disk , ran disk repair and all is ok. Tried to re-install OS but when I get to designating drive its blank. When I go to startup disk there is a "?" mark. When I restart under startup disk search for a drive it still comes up with nothing. Before I got the grey spinning wheel I had a locked screen. Could not move curser or click on anything. Finally just shut down. Thank you in advance for any help!

Shouldn't still have a 'beachballing'... if the drive is being found and the system is trying to boot from it but is having problems, I would suggest looking over ds store's user tip - Step by step to fix your Mac.
It's likely either something corrupt in your system files or a failing hard drive. But follow ds's steps until you find the cause of the problem.
Good luck,
Clinton

Whenever I turn my MacBook pro on, all the other stuff is loaded (MS word/excel/powerpoint), Spotify, iCal, etc are automatically loaded, so in order for me to go to my desired website, I have to close (x) out all applications loaded. Please advise.

Whenever I turn my MacBook pro on, all the other stuff is loaded (MS word/excel/powerpoint), Spotify, iCal, etc are automatically loaded, so in order for me to go to my desired website, I have to close (x) out all applications loaded. Please advise.

If you are using Lion:
Dealing With The Resume Feature of Lion
Managing Mac OS X Lion's application resume feature.
If you shutdown your computer you should get a dialog asking if you want applications to resume on the next startup. Simply uncheck the box to prevent that from occurring. Open General preferences and uncheck the option to Restore windows when quitting and re-opening apps. You can also install a third-party utility to control resume features on individual applications: RestoreMeNot or Application State Cleaner.
It is possible to completely stop the Resume feature although I'm unconvinced that it is that annoying. Nevertheless see the following:
If you have not yet done so you must first make your /Home/Library/ folder visible. Open the Terminal application in the Utilities folder. At the prompt paste the following command line:
chflags nohidden ~/Library
Press RETURN. Quit the Terminal application.
In the Finder navigate to the /Home/Library/Saved Application State/ folder. Delete the contents of the folder. Back up to the /Home/Library/ folder. Select the Saved Application State folder. Press COMMAND-I to open the Get Info window. In the Sharing and Permissions panel at the bottom click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window.
Quit all open programs except the Finder (this is very important.) Next, navigate to the /Home/Library/Preferences/ByHost/ folder. Look for a .plist file with "com.apple.loginwindow." in the file name followed by some numbers in hexadecimal. Select the file. Press COMMAND-I to open the Get Info window and in the Sharing and Permissions panel click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window. If you also find a file with the same filename but with a last extension of ".lockfile," then you should delete it.
The above should eliminate the Resume feature system-wide. Note that any future system updates or upgrades will likely undo these changes. You will then need to repeat this procedure assuming there are no major changes in OS X related to it.

Help! I just opened my 15" Macbook Pro, and all my files are GONE! What could have happened and how do I fix it?

Help! I just opened my 15 " Macbook Pro, and all of my files are GONE! My icloud icon also disappeared. What happened and how do I fix it?

Hi Susan ...
Use Lion Recovery to repair the startup disk and reinstall the Mac OS X if necessary.
Lion Recovery can also help you restore your files from a Time Machine backup.

Re: Not getting audio from TV when connecting MacBook Pro with all correct cables.

How do I get audio from the TV when connecting MacBook Pro with all the correct cables?

Hi Lynn,
If you're positive you have the correct cables, and positive they work, they must be plugged into an input on the TV made for that purpose, then that input must be selected on the TV's menu.

Macbook pro rejects all cds

Similar Messages

Maybe you are looking for