Macbook pro restarts when closed
My macbook pro sometimes (3 times today) restarts when I close the lid rather than just going into sleep mode. What's happening?
I went to the console and found this:
2007-04-21 20:29:52.906 SyndicationAgent[250] WARNING: BestCalendarDateFromString - can't interpret: 'Sat 21 Apr 2007 18:45:03 -800'
2007-04-21 20:29:52.907 SyndicationAgent[250] WARNING: BestCalendarDateFromString - can't interpret: 'Sat 21 Apr 2007 18:45:03 -800'
2007-04-21 20:29:52.908 SyndicationAgent[250] WARNING: BestCalendarDateFromString - can't interpret: 'Sat 21 Apr 2007 18:45:03 -800'
2007-04-21 20:29:52.909 SyndicationAgent[250] WARNING: BestCalendarDateFromString - can't interpret: 'Sat 21 Apr 2007 18:45:03 -800'
2007-04-21 20:29:52.910 SyndicationAgent[250] WARNING: BestCalendarDateFromString - can't interpret: 'Sat 21 Apr 2007 18:45:03 -800'
2007-04-21 20:29:52.911 SyndicationAgent[250] WARNING: BestCalendarDateFromString - can't interpret: 'Sat 21 Apr 2007 18:45:03 -800'
2007-04-21 20:29:52.912 SyndicationAgent[250] WARNING: BestCalendarDateFromString - can't interpret: 'Sat 21 Apr 2007 18:45:03 -800'
2007-04-21 20:29:52.913 SyndicationAgent[250] WARNING: BestCalendarDateFromString - can't interpret: 'Sat 21 Apr 2007 18:45:03 -800'
I'm not sure what this might mean. This is the first time I used the console. Is it something I should do?
Similar Messages
-
Late 2011 Macbook Pro Restarts When Power Connected
I have a late 2011 Macbook Pro, 2.2 GHz with 8GB Ram with OS X 10.8.2 and a series of unfortunate events.
When I connect the magsafe adapter to the computer, after it has been shut down completely overnight, with the lid closed, the Macbook attempts to restart. The restart fails beause the lid is closed but leaves my Macbook in an unstable state. Unless I do a PRAM reset whenever this happens, I will have at least one random shutdown, usually within the first half hour of use after the computer restarts itself. I have also reset the SMC controller, checked the hard drive for errors and tested the memory. I have been careful to make sure that the computer shuts all of the way down before closing the lid and disconnecting power. As far as I can tell at this point, starting the computer on battery, and subsequently connecting the magsafe adapter, does not cause any problems.
I never saw this behavior until I installed Mountain Lion.Run an Apple hardware test and see if that picks up any problems. If this phenomenon is consistently repeatable, I recommend taking it to a repair facility for a diagnosis. This clearly is not normal operation. I hope that you might be still in the warrantee period.
Ciao. -
MacBook Pro crashes when closing lid while in windows 8.1
I use a late-2011 MacBook Pro with Mavericks for work and run Windows 8.1 as my daily driver via Boot Camp. I've been running this setup for about a month without incident, but within the past week whenever I close the laptop it starts acting really weird. Normally it has alway just gone into sleep mode with the white LED on the front of the base pulsing slowly, and when I open it back up (even after a day or two) it snaps right back to action.
When I got home from work one day about a week ago I noticed that the computer was completely turned off, and when I booted it back up it went to OSX (I have it set to boot into Windows by default). I didn't initially think anything of it, but I soon realized that every time I closed the lid it was crashing. After closer examination I saw that the white LED wasn't flashing after closing the lid and that I could hear the fans still running. Oddly enough everytime I open it immediately after seeing this occur, the LED starts blinking when the lid is open yet the screen is black, the computer is unresponsive, and yet the fans are still humming. Eventually the computer just turns itself off completely. I've tested the same sequence of events while in OSX, yet everything works as it should: the LED illuminates immediately after closing the lid and the computer is fully operational the moment I open the lid.
I haven't made any major changes or performed any sort of updates since setting everything up initially, so I'm completely baffled as to why this is occuring. I've tried to reinstall/repair the Boot Camp drivers while in Windows, but to no avail. I'm at a total loss... I defintely am hoping to avoid having to wipe my fully configured windows installation and starting from scratch. Has anyone experienced anything like this and hopefully have any suggestions? Thanks!I would be looking at the Quad core MBP for Parallels. A Quad-core vs Dual-Core is not a fair comparison.
For the same CPU, the two bottlenecks for Parallels are RAM and disk speed.
You will see an improvement if you max out the RAM and the disk speed. The SSD in the MBP will be much faster than the HDD in the iMac. -
Macbook Pro Restarts When Trying to Sync iPhone 4
I'm trying to sync my iPhone 4 in iTunes using the USB. As soon as it starts, my MBP shuts down and restarts. Any suggestions as to why this is happening and/or how I can fix it?
Thanks.Also, I've tried restarting and I've swapped USB cables as well. My iTunes llibrary is on an external hard drive that is also connected to the MBP via a single USB cable.
-
Can I listen to music when MacBook Pro Retina is closed?
Can I listen to music on MacBook Pro Retina when its closed? It can update when its closed as I know. Please reply!
What happened when you tried it? Care to share?
-
Mac Pro restarts when waking from sleep
Hi everyone.
I just got a brand new Mac Pro (2 x 2.66GHz), and had Apple upgrade the RAM to 2GB (4 x 512MB). My first problem is that the computer always restarts when waking from sleep, which is annoying! I have reset the SMC by unplugging the machine for a minite, but the problem persists. I have also tried sleeping the computer with nothing plugged in except the monitor and keyboard/mouse, but I get the same problem. All software/firmware is fully up to date.
I have also just noticed that the System Profiler states that there is only 1GB RAM in the computer, even though I am sure that it recognised 2GB when I got the machine a fortnight ago (I even have a screen shot of 'about this mac' to prove it!). Can anybody help, or do I need to phone Apple support?
Thanks,
MatthewI have a similar problem - hard restart when closing the lid to put it to sleep. It looks like there is a bluetooth issue(?), but I'm not sure what to do with it. We don't have any blue tooth devices in our house. From the console log:
Jan 5 14:57:49 Rigpa kernel[0]: System SafeSleep
Jan 5 14:57:49 Rigpa mDNSResponder: Adding browse domain local.
Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall start
Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall time: 51 ms
Jan 5 14:57:49 Rigpa kernel[0]: pages 93229, wire 29477, act 34496, inact 2520, zf 1141, could discard act 9830 inact 15765
Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall found pageCount 93229
Jan 5 14:57:49 Rigpa kernel[0]: IOHibernatePollerOpen, mlget_interruptsenabled 0
Jan 5 14:57:49 Rigpa kernel[0]: IOHibernatePollerOpen(0)
Jan 5 14:57:49 Rigpa kernel[0]: writing 92989 pages
Jan 5 14:57:49 Rigpa kernel[0]: image1Size 41692160
Jan 5 14:57:49 Rigpa kernel[0]: all time: 5774 ms, comp time: 437 ms, deco time: 0 ms,
Jan 5 14:57:49 Rigpa kernel[0]: image 159194624, uncompressed 276045824 (67394), compressed 158654492 (57%), sum1 529d572d, sum2 c6e9eed5
Jan 5 14:57:49 Rigpa kernel[0]: hibernatewriteimage done(0)
Jan 5 14:57:49 Rigpa kernel[0]: sleep
Jan 5 14:57:49 Rigpa kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jan 5 14:57:49 Rigpa kernel[0]: Started CPU 01
Jan 5 14:57:49 Rigpa kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
Jan 5 14:57:49 Rigpa kernel[0]: System Wake
Jan 5 14:57:52 Rigpa mDNSResponder: Repeated transitions for interface lo0 (127.0.0.1); delaying packets by 5 seconds
Jan 5 14:57:53 Rigpa configd35: posting notification com.apple.system.config.network_change
Jan 5 14:57:53 Rigpa lookupd185: lookupd (version 369.6) starting - Sat Jan 5 14:57:53 2008 -
My friend was Bootcamping his Macbook Pro halfway when he cancelled it due to it running slowly, the Bootcamp Assistant cancelled but the Macbook froze after that and he had to force quit the application. When he restarted the Macbook, it showed the typical white screen and then it switched to a black screen with a underscore at the top left corner. From my experience, it is booting into Windows when it showed the black screen with the underscore and now its kinda stuck and unable to boot into Mac Os X Lion nor Windows 7. Any help for this? And this is a school Macbook with some Master Admin password so it may not be able to enter BIOS but perhaps we can select the boot device. He is screwed if it cannot be fixed :/ Thanks to all who help!
-Macbook Pro received at February 2012 (Mac Os X Lion)a friend told me that he wants my os x cd for my macbook pro to upgrade his imac.
The discs that come with your Mac are "machine specfic" and cannot be used on another Mac. -
Macbook Pro restarts or freezes after Lion upgrade!
My 2007 Macbook Pro restarts (without warning-it's like losing power and get it back immediately) or freezes EVERYTIME when certain key combinations are used, e.g -b (minus then letter b, not at the same time), copy a sentence long and Ctrl-v, and some others that i am not even aware of.
This happens only after i updated to Lion! First, i thought it is because of the OS, but it crashed even in single mode with those key pressed. So, i used Apple Hardware Test, but it freezes during the test, every time
I tried resetting PRAM,SMC already. This is very weird and I have googled for all day long, hoping to find an answer for this problem but got no luck at all!
As my last attempt today, i backup data, format the hard drive and install Tiger. However, the problem persists. I am Vietnam, so take it to an apple store is not an option as we dont have any here!
Do you guys have any idea? This is driving crazy! 4 clients are chasing me :d
Thanks in advance!Did reinstalling help? If not, then consider reinstalling Lion on a newly formatted drive. Let the system reinstall using Internet Recovery instead of reinstalling from a USB flash drive. The downloaded installation will be 10.7.2.
Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
I cannot turn on my MacBook pro. When I turn it on all I get is a grey screen with a grey spinning thing under the apple. Can anyone help?
Reinstall OS X.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
====================================
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
three times faster than wireless. -
MacBook Pro issues when updated
I just did an update on my MacBook Pro and when it restarted, it turned on but went to a gray screen with "panic(CPU 0 caller 0xffffff....."unable to find driver for this platform:" ect. I've tried shutting it down and turning it back on: doesn't work?
Start your trouble shooting with this link:
https://discussions.apple.com/docs/DOC-5282
Ciao. -
What is wrong with OSX on the MacBook Pro and when will it be fixed?
When running Second Life or Worlds of Warcraft or just quick browing... anything graphically intensive on the MacBook Pro, the machine slows to a crawl, eventually completely freezes up. The cursor doesn't move, pressing the Caps Lock key does not change the Caps Lock light and the machine is no longer reachable from any other machine on the network. The only means available to recover is to hold the power button down until the Mac powers off and then restart it. This doesn't happen when running XP through boot camp and windows client versions of these programs. What is wrong with OSX on the MacBook Pro and when will it be fixed? Thanks.
I am not sure that this relevant to the discussion. But I am searching for anyone else who is seeing random freezes on 10.4. I usually don't see anything in the log after I have to do a hard reboot of the box. However, I have noticed some I/O messages when I have been able to console into an affected device, but have not captured to this point. Also, when I am able to console, the box will accept the login, but times out when trying to authenticate the password.
I am also seeing a server freeze on my G4s. I am able to reproduce the problem with a clean install from the 10.4 disk. The issue is reproducible with tcpdump, dumpcap as well as tshark. I have also tried compiling the tools with different versions of libpcap. I am able to reproduce this problem every time with a packet generator sending small packets.
It seems that the small packets aggravate the underlying cause. As the more small packets are sent the quicker I am able to reproduce the problem. With a mix of packet sizes, as seen in most networks, this issue is hard to reproduce. We have been using the G4 since 2003 as a packet analysis tool and it has been very stable up until we attempted to do analysis of a VOIP network with 10.4. The small RTP packets in conjunction with 10.4 seem to be the culprit.
So far I am not able to reproduce the freeze on a 10.2 or 10.3 image. This is not isolated to bad hardware, as I have been able to reproduce on 4 different Xserves in my labs with similar configurations.
I currently have a G4 set up in my lab and would be able to supply any info that may be needed to track down this issue. I have been thrust into administration on this box recently so I am not very familiar with debugging procedures on the Xserve or MacOS. However, I have the hardware and the test equipment that many in a production setting may not have at their disposal. So if anyone, with extensive knowledge of the Xserve or MacOS, is willing to work with me to track down this issue I am willing to do the leg work in the lab. I would appreciate any assistance that is available. -
I have a MacBook Pro. When surfing the web it will eventually slow to a crawl. When this occurs, there will be a small multi-colored wheel spinning until my latest command is handled. What is causing this and is there a way that I can modify or prevent this from happening? Is there a setting that will prevent this?
When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!
The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support. -
i cannot found iLife app on my macbook pro and when i want to buying it i cannot and i have this massage (These apps cannot be accepted by your Apple ID.These apps were already assigned to another Apple ID, and they will be available in that Apple ID's purchases list. If you don't have access to that AppleID and want to receive future updates, you will needto purchase the applications ) what i want to do now ? please tell me
Either use the Apple ID you used when you originally purchased the applications or you will have to purchase them using your Apple ID. If you did not have the other Apple ID, then you have the applications illegally or they were improperly included with a computer you purchased from someone else.
-
I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?
Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education.
Maybe you are looking for
-
TS3999 ipad calendar: events synch from mac to ipad in month display but not week display
ipad calendar: events synch from mac to ipad in month display but not week display
-
Add Supported Channels Airport extreme Macbook Pro 15' late 2010
My wireless network at school recently added another router under our classroom. The channel for this connection is channel 13 which is not supported under the default supported channel settings. I was wondering if there is way to add or change these
-
Problem in formatting ,scan disk i need to set cd rom as first boot device
hi, For formatting ,scan disk i need to set cd rom as first boot device But whenever i do it from manager and restart the machine It takes long to get back the console of the machine. By the time machine boot's up, its from hard disk. How would i avo
-
I want to use my hotspot instead of WiFi but it won't work as long as WiFi is available. Is there a way to make it work? The bandwidth is much better on my phone than what my ISP offers at home. I am trying to stream HD movies, and the performance is
-
I need to extract GLPCA table data into BW. Is there any Standard Business Content available for doing the same?